JVM for iPAQ 3800 series

Hi,
I am completely new to PDA. I am currently working on a research project involving PDA (iPAQ 3800 series) in which I am trying to install JVM (free or open source) under PocketPC 2002 (OS) to run Java application. Sun has no longer support the free download for PocketPC 2002, only for older Windows CE OS but my PDA has to run under PocketPC 2002.
I have a Java application that runs well in jdk 1.4.1_02. Now, I am
trying to run it in PDA. Any assistance is highly appreciated?
Thanks

Jimmy if you have any luck, please let me know as i am in exactly same position! its quite frustrating!

Similar Messages

  • Buy JVM for iPAQ/PalmOS PDA device?

    Hello everybody.
    I am looking for buying a PDA device(iPAQ or PalmOS).
    As I can saw from the specifications of each device I am interesting in, none of them include any CD with any JVM model.
    I looked for J9(WEME) and crEme JVM.
    However, I can not understand if I have to buy any of these JVM seperately or do I have just to give to IBM or NSICOM my serial number
    of my device in order to give me JVM free?
    On the other hand, at PalmOS device (e.g. Tugsten T5) I read that you just give you the WME free.
    The link is :http://www.palmsource.com/press/2004/021004_ibm.html
    At least, can somebody tell me the prices of WEME and crEme Java Virtual Machine?
    I really appreciate any help.
    Regards,
    kalgik

    Jimmy if you have any luck, please let me know as i am in exactly same position! its quite frustrating!

  • VMS 2.3 Device package for 3800 Series

    hi
    We are having VMS 2.3 installed which is not able to monitor or to perform any operations on 3800 series routers.
    How we can add device pack for 3800 series routers ?
    And from where to download the pack ?

    The device pack is available for download on Cisco.com and you can get it if you have correct licence. After downloading the pack stop the cisco works deamon manager service and and apply the pack.

  • Updating default JVM for USA 2007 Daylight Saving Time (DST) Compliance

    As mentioned on various notes on metalink on DST compliance, I got around to updating the JVM on my OracleAS 10.1.2 on Linux. As per note 397281.1,
    "Apply the latest in the major series if the specific version above has been superseded by the vendor"
    So, I downloaded the following version from Sun: java full version "1.6.0-b105" (JDK 6.0) and followed note 272808.1 on how to update the default JVM for 10gAS.
    The middle-tier starts just fine but the OC4J_BI_Forms and Reports Server continually shutdown and restart.
    Has anyone gone down this road? Any comments appreciated.
    Manish

    Hi,
    We have a bug to track assessing this issue, but have not done so yet. I'm speculating, but it may turn out to just require an automatic update from Windows.
    Regards, Stephen

  • Creating VLAN on Cisco 3800 Series

    Hello
    I am new to networking. We have a Cisco 3800 series router with 64 ports. We have connected servers and PC's directly to the back of the router. Almost all of the ports are used with the exception of few. We would like to create a VLAN for the remaining few ports. I am able to telnet to the router or connect directly using hyper terminal.
    I have been told that we cannot create VLAN's directly on the router. For that purpose we need to first get a switch and connect the switch to the router, then create VLAN’s using the switch. Can someone please provide some tips? Any suggestions would be nice…Thanks

    Appreciate you getting back. Here is the "show vlan-switch" output
    ----------------------->
    #show vlan-switch
    VLAN Name                             Status    Ports
    1    default                          active
    1002 fddi-default                     active
    1003 token-ring-default               active
    1004 fddinet-default                  active
    1005 trnet-default                    active
    VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
    1    enet  100001     1500  -      -      -        -    -        1002   1003
    1002 fddi  101002     1500  -      -      -        -    -        1      1003
    1003 tr    101003     1500  1005   0      -        -    srb      1      1002
    1004 fdnet 101004     1500  -      -      1        ibm  -        0      0
    1005 trnet 101005     1500  -      -      1        ibm  -        0      0
    ---------------------->
    As before I do not see any VLAN's set up. How come all the ports are not showing up on default VLAN 1. Maybe I can create a new VLAN and assign 2 or 3 ports to it. Please advise...Thanks

  • Deskjet 3800 series Image reversed print when shared over IP XP Host Vista client

    Deskjet 3845 color printer
    OK when printing direct from XP Host via USB.
    OK Printing direct from Vista via USB.
    When printing from Vista client to shared XP host image is reversed and color planes are disabled.
    Using Vista driver that shipped with OS.
    Changed XP software from 3845 driver to generic 3800 series no change in behavior.
    Believe problem is with Vista 3845 Driver direct printing OK Network printing is bad.

    I am having very similar challenge with Vista 64 home premium and laserjet 1020. The Vista 64 spooler file seems to have become corrupted, since the printer worked for several months with vista before the error messages and continues to work fine with my old computer running xp pro. HP chat sessions (14 hours) have been entertaining but unhelpful, and phone support insists that the spooler error is with the printer, which is more than 6 months old. I have rebooted, reinitialized the printer from Vista and dos, reloaded and reinstalled printer drivers.  Did you get a fix for this?

  • Why does the RX3870-T2D512E-OC detect as 3800 series and not 3870?

    I am wondering why does my video card detect as a 3800 series and not specifically the HD 3870?  I heard this was fixed with a bios update with Sapphire does MSI need to do the same thing with their card?

    Has been for all the ATI Catalyst drivers.. what other driver is there?  The MSI Drivers are always so far behind so I don't use them of course.

  • Fax machine integration in 3800 series router

    How to configure FXO/FXS port on 3800 series router for analog fax machine use?
     I am using VIC2 -4fxo & VIC3-4fxs.How would I configure the  ports to support this and also the dial peer? 
    Thanks for any help/examples.
    Regards,
    Ajay Jose K

    Dear all
    I am using VIC2 -4fxo & VIC3-4fxs. Can i add vic cards  directly to router ?

  • LLDP Support on 2800/3800 Series?

    Is LLDP supported at all on the 2800/3800 series.
    I cannot seem to find this for the 2800/3800 on the Feature Navigator.
    I am currently running multiple 2800/3800 series routers in the 12.4 code train.
    Thanks,
    Phill

    LLDP is not supported on Cisco routers in the 12.4 code. It does appear they added support to the ISR and ASR routers sometime in 15.x. 
    Regards,
    Mike

  • Need EXPERT's suggestion for APEX CHART SERIES

    Hello Everyone,
    I have been trying to solve an issue with my apex line chart. The scenario is as follows:
    I have a table called revenue. revenues per year are saved in it. and revenues are generated from three sources which are also saved in the same table.
    I have made a line chart on it. works well.
    Now I have to show that if the value of one of the sources had fallen, how must have it affected the total. I made a number field that takes an estimated change value, and build my sql query with it. it works but the problem is that it changes the non-affected source too. it must change the value of the affected source only and hence the total value.
    I hope I make sense and anybody can suggest something.
    bold or I will put it this way, how can I write a select statement for a chart series so that one of the rows value does not change and the other two change. ... ?
    Edited by: Samooray92 on May 30, 2013 2:41 PM

    Samooray,
    Let's work with this question since there is more detail here than in the other one. {thread:id=2543702}
    First it's always help to know:
    Full APEX version
    Full DB/version/edition/host OS
    Web server architecture (EPG, OHS or APEX listener/host OS)
    Browser(s) and version(s) used
    And sometimes this information as well.
    Theme
    Template(s)
    Region/item type(s)
    When a question goes unanswered for a while, there is no need to reply to it or to start a new question. You can edit the original question and just add "Bump" at the bottom and save the changes. This will bump it back to the top of the question list. And by that time, you might think of additional information you can add to the question.
    Say, why would a question go unanswered? Well, easy questions and frequently asked questions with well-known answers can be answered right away. Your question seems more complicated and I don't think we have all the information we need to understand exactly what the question is.
    You are doing a "series" chart. What kind of series chart: bar, column, line? What is each series? For example, components of revenue might be 1) sales, 2) licensing revenue and 3) other. Then you might have one series for sales, a second for licensing revenue and a third for other.
    Could you mock up a trivial example on apex.oracle.com http://apex.oracle.com/pls/apex/f?p=4700:1:0::::: ?
    Regards,
    Howard

  • Same number range for two different series groups?

    Dear all,
    There are two scenarios
    1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
    2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
    But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case)  as per excise legal requirement
    Ie running number is for series group 20 is 300016
    For the above deemed exp case (second scenario)it should pickup 300017
    And again when they do under bond case(first scenario), it should pick up 300018 like that
    Is it possible to maintain the same number range for two different series groups(20 and 30)?
    Even if you maintain the same number range for 30, as per running number range of 20
    Will the system update simultaneously the same number range for 20 and 30 series groups?
    Please suggest the way.

    With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
    Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
    Regards,
    Aroop

  • I just paid for a TV series on my iPad and after watching 1 episode the message appeared This device is already associated with an Apple ID

    I just paid for a TV series on my iPad and after watching 1 episode the message appeared This device is already associated with an Apple ID

    Hello there, rickfrombeverley hills.
    The following Knowledge Base article provides information on how to report the issue you're having with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How to add 3 legends for a single series barchart?? JAVAFX

    Here is my code to generate 10 bars of different colors. I want to add legend respectively but it only one shows yellow legend
    1. I think it shows only 1 color because there is only 1 series. Is it possible to add more than 1 legend for a single series?
    or
    2. or can i display another image for legend in barchart??
    output :http://i.stack.imgur.com/fSNu7.png
    file i want to display in barchart:http://i.stack.imgur.com/cchch.png
    public class DynamicallyColoredBarChart extends Application {
        @Override
        public void start(Stage stage) {
            final CategoryAxis xAxis = new CategoryAxis();
            xAxis.setLabel("Bars");
            final NumberAxis yAxis = new NumberAxis();
            yAxis.setLabel("Value");
            final BarChart<String, Number> bc = new BarChart<>(xAxis, yAxis);
            bc.setLegendVisible(false);
            XYChart.Series series1 = new XYChart.Series();
            for (int i = 0; i < 10; i++) {
                // change color of bar if value of i is >5 than red if i>8 than blue
                final XYChart.Data<String, Number> data = new XYChart.Data("Value " + i, i);
                data.nodeProperty().addListener(new ChangeListener<Node>() {
                    @Override
                    public void changed(ObservableValue<? extends Node> ov, Node oldNode, Node newNode) {
                        if (newNode != null) {
                            if (data.getYValue().intValue() > 8) {
                                newNode.setStyle("-fx-bar-fill: navy;");
                            } else if (data.getYValue().intValue() > 5) {
                                newNode.setStyle("-fx-bar-fill: red;");
                series1.getData().add(data);
            bc.getData().add(series1);
            stage.setScene(new Scene(bc));
            stage.show();
        public static void main(String[] args) {
            launch(args);
    ...Edited by: 993431 on Mar 12, 2013 1:42 PM

    Either:
    1. Use a chart which displays multiple series, then you can allow the built-in legend to show OR
    2. Use a single dynamically colored series have you have done and create your own custom legend.
    import javafx.application.Application;
    import javafx.scene.*;
    import javafx.scene.chart.*;
    import javafx.stage.Stage;
    public class ThreeSeriesBarChart extends Application {
      @Override public void start(Stage stage) {
        final CategoryAxis xAxis = new CategoryAxis();
        xAxis.setLabel("Bars");
        final NumberAxis yAxis = new NumberAxis();
        yAxis.setLabel("Value");
        final BarChart<String, Number> bc = new BarChart<>(xAxis, yAxis);
        XYChart.Series lowSeries = new XYChart.Series();
        lowSeries.setName("Not Achieved");
        XYChart.Series medSeries = new XYChart.Series();
        medSeries.setName("Achieved");
        XYChart.Series hiSeries  = new XYChart.Series();
        hiSeries.setName("Exceeded");
        bc.setBarGap(0);
        bc.setCategoryGap(0);
        for (int i = 0; i < 10; i++) {
          final XYChart.Data<String, Number> data = new XYChart.Data("Value " + i, i);
          if (data.getYValue().intValue() > 8) {
            hiSeries.getData().add(data);
          } else if (data.getYValue().intValue() > 5) {
            medSeries.getData().add(data);
          } else {
            lowSeries.getData().add(data);
        bc.getData().setAll(lowSeries, medSeries, hiSeries);
        bc.getStylesheets().add(getClass().getResource("colored-chart.css").toExternalForm());
        stage.setScene(new Scene(bc));
        stage.show();
      public static void main(String[] args) {
        launch(args);
    import javafx.application.Application;
    import javafx.beans.value.*;
    import javafx.geometry.Pos;
    import javafx.scene.*;
    import javafx.scene.chart.*;
    import javafx.scene.control.Label;
    import javafx.scene.layout.*;
    import javafx.scene.paint.Color;
    import javafx.scene.shape.*;
    import javafx.stage.Stage;
    public class DynamicallyColoredBarChart extends Application {
      @Override public void start(Stage stage) {
        final CategoryAxis xAxis = new CategoryAxis();
        xAxis.setLabel("Bars");
        final NumberAxis yAxis = new NumberAxis();
        yAxis.setLabel("Value");
        final BarChart<String, Number> bc = new BarChart<>(xAxis, yAxis);
        bc.setLegendVisible(false);
        XYChart.Series series1 = new XYChart.Series();
        for (int i = 0; i < 10; i++) {
          // change color of bar if value of i is >5 than red if i>8 than blue
          final XYChart.Data<String, Number> data = new XYChart.Data("Value " + i, i);
          data.nodeProperty().addListener(new ChangeListener<Node>() {
            @Override
            public void changed(ObservableValue<? extends Node> ov, Node oldNode, Node newNode) {
              if (newNode != null) {
                if (data.getYValue().intValue() > 8) {
                  newNode.setStyle("-fx-bar-fill: -fx-exceeded;");
                } else if (data.getYValue().intValue() > 5) {
                  newNode.setStyle("-fx-bar-fill: -fx-achieved;");
                } else {
                  newNode.setStyle("-fx-bar-fill: -fx-not-achieved;");
          series1.getData().add(data);
        bc.getData().add(series1);
        LevelLegend legend = new LevelLegend();
        legend.setAlignment(Pos.CENTER);
        VBox chartWithLegend = new VBox();
        chartWithLegend.getChildren().setAll(bc, legend);
        chartWithLegend.getStylesheets().add(getClass().getResource("colored-chart.css").toExternalForm());
        stage.setScene(new Scene(chartWithLegend));
        stage.show();
      class LevelLegend extends GridPane {
        LevelLegend() {
          setHgap(10);
          setVgap(10);
          addRow(0, createSymbol("-fx-exceeded"),     new Label("Exceeded"));
          addRow(1, createSymbol("-fx-achieved"),     new Label("Achieved"));
          addRow(2, createSymbol("-fx-not-achieved"), new Label("Not Achieved"));
          getStyleClass().add("level-legend");
        private Node createSymbol(String fillStyle) {
          Shape symbol = new Ellipse(10, 5, 10, 5);
          symbol.setStyle("-fx-fill: " + fillStyle);
          symbol.setStroke(Color.BLACK);
          symbol.setStrokeWidth(2);
          return symbol;
      public static void main(String[] args) { launch(args); }
    /** colored-chart.css: place in same directory as other bar chart application files and setup your build system to copy it to the output directory */
    .root {
      -fx-not-achieved: red;
      -fx-achieved:     green;
      -fx-exceeded:     blue;
    .default-color0.chart-bar { -fx-bar-fill: -fx-not-achieved; }
    .default-color1.chart-bar { -fx-bar-fill: -fx-achieved; }
    .default-color2.chart-bar { -fx-bar-fill: -fx-exceeded; }
    .level-legend {
      -fx-padding: 10;
      -fx-border-width: 2;
      -fx-background-color: rgba(211, 211, 211, 0.5);
      -fx-border-color: derive(rgba(211, 211, 211, 0.7), 10%);
    }

  • Linux: which toolkit is used in JVM for heavyweight components?

    Hi,
    which toolkit is used by the Linux-variant of the JVM for the heavyweight-components? GTK?
    Oxy

    java.awt.Toolkit is abstract. He means what implementation is used (motif-based, etc.). For example, sun.awt.motif.MToolkit.
    It might vary from one Linux variant to another (and from one JVM version to another), I'm not sure. But for any particular Linux system, you can run this program to find out:
    import java.awt.*;
    public class test {
       public static void main(String[] args) {
          System.out.println(Toolkit.getDefaultToolkit().getClass());
    }Edited by: BoBear2681 on Apr 24, 2008 3:37 PM

  • Cisco works LMS 3.0.1 cannot archieve configuration for cisco 3000 series vpn concentrator

    Hi All,
    Our problem is, we have Cisco Works LMS 3.0.1. cannot archieve configuration for cisco 3000 series vpn concentrator.
    Any help would be greatly appreciated.
    Thanks in advance.
    Samir

    Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices.  RME will only use HTTPS to fetch VPN concentrator configurations.

Maybe you are looking for