JVM Launcher error

I have installed Limewire on my winXP machine, which uses java 2 runtime (SE v1.4.2_04). Along with Limewire, it installs an adware program called LimeShop. When I attempt to uninstall LimeShop, I get the following popup error from the JVM Launcher: "Cannot find main class. Program will exit". This also occurs when I startup my machine. I realize I could just uncheck the line that kicks off the app using msconfig, but I would like to solve the error correctly, so I can then uninstall LimeShop cleanly.
I have already re-installed Java 2 Runtime, but it still gives me the error. The line it is trying to execute is as follows:
javaw -cp "C:\Program Files\LimeShop\System\Code" Main lp: "C:\Program Files\LimeShop"
I have checked the classpath and the file it is looking for exists. Any ideas?
thanks,
Kevin

Then you should not be getting the error "cannot find
main class". Are you sure that is the command that
causes your error?Yes, it is listed in the startup tab under msconfig. I can stop the error from occurring by uncheking the box, but as I mentioned in my post I would like to solve the error. This way I can uninstall LimeShop cleanly (since I get the same error when trying to uninstall).
>
What do you get if in the MSDOS command prompt you
type:
java -cp "C:\Program Files\LimeShop\System\Code" Main
lp: "C:\Program Files\LimeShop"
Exception in thread "main" java.lang.ClassFormatError: Main (Bad magic number)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
At this point, I would consider finding a way to uninstall LimeShop manually (including registry entries).
thanks,
Kevin

Similar Messages

JVM Launcher error message

I have written a java program that when opened with Jav 1.3 I get a JVM Launcher error. Is it possible to catch this error in my code and put a different error message in a JOption pane?

Probably not, since until the JVM is started, your application doesn't exist. Even if your app starts up, it will start AFTER the JVM error message is written out (probably).

JVM Launch error

I have already looked into all the threads regarding this error but I am not able to solve my problem.
Now the problem is that I am trying to run a java application but it gives me the error [message box] as given below :
Java Virtual Machine Launcher - [heading of the message box]
Fatal Error. Program will now exit -[Message in the box]Now When I try to run this application ion Windows 2000 Professional, it works absolutely fine.
But it gives me this error when I try to run the application in Windows XP.
Also it gives the same error if I try to run the application from the command line.
The command line cmmand is
javaw -Dpropertyfile=abc.prop -jar xyz.jarAny help / guidance will be appreciated.
Thanks

It just started working fine. Nothing was done by me. But one reason I can think of is that a patch / security script might have been launched when It stopped working and when it caused most of the applications not able to launch Java applications, patch might have been removed. This is the only logical reason I can think of .
Any other logical conclusion will be appreciated.

Launch Error - This file cannot be launched

Hi all,
I renamed a class file in a flash build and now every time I try to debug my project (cmd+F11) I get an error window saying Launch Error - This file cannot be launched.
I have tried wiping the project and moving the files in to a new one and also restarting FB4 but with no luck. I have also tried setting up a brand new blank project and this will not launch either.
The problem seems to only be with Flash projects as a new Flex project runs ok.
I am running Flash Builder 4 , Flash CS5 on a Mac 10.6.4 and debugging in Google Chrome 7.0.517.41
Any suggestions?
Cheers

There is no adl listed in my list of active processes in Activity Monitor. I have tried rebooting my machine, restarting all my software and projects and cleaning my projects. No luck yet.
If I just switch to flash and run the fla directly it works fine so it must be Flex specific.
Cheers for the suggestionsso far . Keep em coming if you have them

TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

I just purchased a Macbook Pro. I used Migration assistant to transfer my files from my '06 iMac, which was running snow leopard to the Macbook and at start up now get a DMS Launch error every time... any suggestions??
The error message says check with the developer to make sure DMS Launch works on this version of OS X. You may need to reinstall the application.
I have installed all updates as it suggests, to no avail. I keep getting the error message and report pop up box each time at start up and the only way to be rid of it, is to click ok to send the report - there is no option to stop the report from coming up.
Does anyone have any suggestions on what I can do to stop the error message appearing and resolve the issue?
Thanks
Chelle

Click Command+shift+G
Type in the following, one by one- Then delete the **** out of them.
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/Application\ Support/DivX/
HOME/Library/Preferences/com.divx.*
Also search anything "DIVX" while in library. Delete the **** out of that too.

What is Browser Launch Error: 193? Cannot access Java information

After about the last 2 updates to Firefox, when I am updating Java, and wish to click on "Additional Information" there is a small box which pops up and states: Browser Launch Error: 193. Therefore I
am unable to access the additional information.

when an update is necessary an icon appears in the bottom bar (task bar), and I click on the icon to begin viewing it. When it has downloaded the install box appears with "terms of service". When I attempt to click on this is when the "browser launch error: 193" appears, and I cannot read the "terms of service" (or similar statement). The small box indicating the "browser launch error" pops up in the middle of the larger screen for downloading. This has only occurred since the last 2 (or 3) Firefox updates, so wondering if the updates are related to this(?). Never had this problem previously with the Java updates. I am bewildered by this, and the inability to read the "terms of service" (or similar statement). Because it states that you accept the terms of service, however without reading it, a user does not know what it says. Thank you both for your recommendations.

JVM Loader Error: Unable to find supported JDK or JRE version

Hello,
I am trying to use Visibroker (Borland version 6.5) with JDK 1.5.2
When I try to run idl2java, it gives me the following message:
JVM Loader Error:
Unable to find a supported JDK or JRE version. The JVM Version should be either 1.3.1 or 1.4.1 and above.
Check your installation and use -VBJjavavm or -javahome(vbj only) to specify the JDK or JRE location
I am using eclipse IDE - i created an external tool configuration for idl2java giving the argument *.idl
I looked in the forum and tried the suggestions given in this thread
http://forum.java.sun.com/thread.jspa?threadID=376403&messageID=3052413
Where am I going wrong. Can someone help me?
Thaks
Manju

Hi,
I don't know if you got an answer to this problem. It looks like you need to install Borland Service Pack 1 (for BES 6.5) to fix this issue. I spent a couple of days squirming, trying to figure out this issue.
Hope this helps.
Regards,
Sony.

Installing 10g on Windows XP machine JVM launcher "Can't find main class"

I am trying to install 10g Release 2 on a Windows XP machine. I downloaded the zip from the OTN. Unzipped the file. No problems. Tried to run the OUI, it opened up a shell and said to wait. The shell closed and a message frome the JVM Launcher displayed "Can't find main class. Program will exit." I have seen several people on this and other discussion boards having this problem, but have yet to get a solution. Please help.

What's the value of CLASSPATH environment variable? Possibly a non-oracle application has set this variable and the installer catches it. If there is such a variable, comment it out and try again.

PSD 13.0.1 launch errors

I have used PSD since version 1 and lots have changed, except that there is always a new version around the bend.
I just installed PSD 13 and updated it to 13.0.1. on my MacPro 3,1 with 16GB and 4TB. Along the way I received launch errors :
MMX cannot be loaded
Color settings cannot be synched
Multiple Processor can't work with this version of Photoshop
I also received errors when I tried to creat a 3D layer from a shape or text layer or open a readable .obj file as a 3D layer.
I updated the nVidia GeForce 8800 GT with the new driver 304.00.05f02 posted 10/2/2012.
The first few times restarting with the new drivers, there was no changes. Finally I was able to use the 3D portion of PSD 13.
Even though I was able to use the 3D, I still got the error warning on launch of PSD 'that the multiple processors weren't compatible with this version of Photoshop.'
The Adobe Help site<http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html> says that my GPU will work with PSD 13.
I am also confused by the technospeak of open_gl and open_cl. Some places refor to the GeForce 8800GT as having both and some dont refer to those terms. I wish things were consistant. If it was found to work with PSD 13 as stated in the above reference are GL & CL active in the card I have?
So why are there so many issues. I never have had any and now I am wondering whether to go back to PSD 12 to avoid the hassles.
Please give some answers if you know so I can be confident using PSD again.

You copied plugins from a previous version of Photoshop by mistake.
Go delete all the plugins that you copied from a previous version.
And remember that the plugins folder should only have third party plugins in it.

"This game cannot be launched error" iPod Classic 160 Gb

I have an iPod Classic, 160 Gb. I purchased Sudoku from the iTunes store.
The game downloaded to my computer; and it shows in the iPod Games tab.
It appears to sync to the iPod, but in the iPod's games menu there is no icon for the game (just the black and white dice). When I try to play the game, I get the "This game cannot be launched error" with the prompt to reinstall the game.
Are there any fixes for this? I've tried all the troubleshooting in the support docs, and nothing seems to work.

Thanks for your suggestions; however none of them worked.
I contacted technical support, and the only suggestion they had for me was to request a refund - because for some reason, unknown to them, the game doesn't work on my iPod.
I'm not generally a ranter - I try to be polite to people, in person, on the phone, online - wherever, but I have to say that in my experience, Apple seems to have the worst support of any company with which I have ever dealt.
After being told no less than eight times, by five different representatives from iTunes support, I was referred to technical support, who told me in essence, "tough cookies" (although the representative certainly didn't say that, he was quite polite).
I had to double check that I was talking to "technical" support.
I've been a faithful iPod user for many years; but this experience has certainly soured me. I will have to think long and hard before buying another Apple product if the support I have experienced is indicative of a typical support instance.
Thanks again for your suggestions.

Flash cannot be launched error code -10810

I try to launch Flash. I've been using just fine for a while
and all I get is this:
Flash cannot be launched error code -10810
don't know what to do. I figure something is corrupt
somewhere. I moved Flash Preferences out of its folder, in the hope
that was it. Should I just reinstall Flash or what?
I'm using a mac.

Hi Srinivas,
Thank You for the instruction re: SIFC, this has helped, the browser starts and I arrive at the Netweaver logon screen.
However at the logon screen I seem to be encountering further errors, I have attempted to logon on, the dialog box does not appear, details from the logon screen are as follows:
No switch to HTTPS occurred, so it is not secure to send a password
SSO logon not possible; logon tickets not activated on the server
Choose "Log On" to continue. A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password
System:
*Client: **
User:
Password:
Language:
English EN
German DE
Log On
Change Password
Any further advice here would be most appreciated.
Regards,
Mart.

Ray tracer failed to launch error is costing me time and money

Add me to the legion of people angry about this bug. Doing a search for it here and everywhere else basically leads me to the conclusion that Adobe knows about this problem and does nothing about it to fix it. I'm working on a project for a client with a deadline that's coming in a few days, and I have to constantly close AE and open it again, sometimes even reboot, to get it to work for a few minutes, and then it crashes again. So something that I could have been close to finish by now, I'm still not half way through because of this horrible bug that Adobe doesn't fix. Of course some people can't complain because they're running it on an unsupported card, but I'm running it on a GTX570 with 1.2 GB of RAM, so there's no reason why it shouldn't work. The machine also has an i7 3930k CPU with 32 GB of very fast RAM, and it's a fresh installation of Windows 8.1 Pro from less than a week ago, with all the latest drivers.
The project is very simple, a solid layer acting as a floor with a grid generator, a layer of text, and about 8 pictures sitting a few pixels above the floor. Nothing overly complicated, and it still crashes all the time. And this is not even a 1080p project, it's 720p.
And to add insult to injury, After Effects does not respect a custom layout when there was a comp viewer in the secondary monitor, so each time I restart AE I have to open a new comp viewer, drag it to the second monitor and resize it. Did nobody at Adobe think that people would be using two comp windows open at the same time, one in each monitor?
Adobe should focus less on adding new flashy features and instead making their software reliable, and not force people to buy CC. They should fix CS6.

I am having the same issue, though today I tried something that helped a lot. I am working on a mac pro with a flashed Quadro FX 580 and a slower Quadro 4000 card, and two displays. I've always plugged one display into each of the cards and lately frequently gotten the "Ray Tracer failed to launch" error. Today I plugged both displays into the less-powerful graphics card, leaving the 580 untaxed by running a monitor and so presumably entirely free for Ray Tracing. And so far today I haven't gotten the error we both know too well. You mention being on a PC and don't mention having two cards, so this may not help you. But if you still have the card you swapped out for your 570 and can pop it in your rig it might be worth a try.

Launcher Error: Setuid error: Resource temporarily unavailable

Hi All,
I'm running a job in tidal for couple of weeks now but suddenly I encountered an error "Launcher Error: Setuid error: Resource temporarily unavailable"
What does this mean? I'm using RHEL server release 6.3 Beta.
Thanks,
Melody

You need to check your ulimits (ulimit -a) for the user launching the job and also the tidal agent user (tidal). The 'nofile' and 'nproc' for user cannot be higher than the tidal agent user (tidal). To fix it, you can alter the ulimit file (/etc/security/limits.conf) for 'tidal' (if that is the user your agent is running as) so that it is equal to or greater than the job user.

Blackberry Electron 8800 JVM 102 Error Blackberry Desktop manager help

My blackberry got the JVm 102 error and i found out how to fix it using Blackberry Desktop manager, but i do not know which verson of blackberry Desktop manager i need, can any one help. thanks in advance -mike

Yes. Before you connect your device
go to options > advanced options > service books > scroll to Desktop (SYNC) and hit menu > delete
Run your sync on your PC, then go back to service books, hit menu > undelete. You will be good to go.
If you are the original poster (OP) and your issue is solved, please remember to click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the Star on the left of their post.

Rapidwiz launch error Exception in thread main java.lang.UnsatisfiedLink

i am having the same issue rapid wiz is throwing an error
please share info of how to install 32 bit rpms on 64 bit ?
And these 32 bit rpms also need to be installed to get over the rapidwiz launch error :Exception in thread main java.lang.UnsatisfiedLink
rpm -Uvh libXau-1.0.5-1.el6.i686.rpm
rpm -Uvh libxcb-1.5-1.el6.i686.rpm
rpm -Uvh libX11-1.3-2.el6.i686.rpm
rpm -Uvh libXext-1.1-3.el6.i686.rpm
rpm -Uvh libXi-1.3-3.el6.i686.rpm
rpm -Uvh libXtst-1.0.99.2-3.el6.i686.rpm

ninjanoodle5 wrote:
thank you Hussein,
issue is now resolved
steps followed : yum install --setopt=protected_multilib=false *giveyourpackagename*.i686
Thanks for the update and for sharing the solution.
Regards,
Hussein

JVM Launcher error

Similar Messages

Maybe you are looking for