K 210 windows 7

Do I need to update drivers and anything else
I now have window 7 as my op system

I know your solution! This happened to me. Look on your keypad. (mouse) In the top lefthand corner there should be a little circle. If it's glowing (I think orange) it is locked. Press the dot gently with your hand (it may take a few tries) and it should stop glowing. Now your computer should be as good as new!
Hope I helped,
Maddie

Similar Messages

Hp 210 windows update not working

HP 210 1032 Cl Hard drive failed. Machine is appx. 5years old and the recovery CD's were from tht same time. Installed new WD 320 GB hard drive and used recovery CD's to reinstall Win 7 32 bit starter. All is working well EXCEPT windows update. Keeps coming back with message "service not started", etc. Have tried downloading new drivers from HP for the Intel atom, etc---but still no luck. Any guidance appreciated!

Hi @ned-m
I regret that the link did not resolve your difficulty.
What was the results when you tried resetting the updater per the document in the link?
Did you run MS Fix It, if so what was the result.
Here is a link to Troubleshoot problems with installing updates . If none of the above has helped, I would try doing a Windows repair.
I would try a Windows repair or reinstall your Windows. Performing an HP system recovery (Windows 7)
If you are still having a difficulty,I suggest contacitng HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Geforce 210 + windows 8.1 = death ?

Estimate HP team:
Im facing a very rare problem with my video card
My computer is this:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03517270
windows 8.1
and my video card is this:
http://www.gigabyte.com/products/product-page.aspx?pid=3913#sp
( now there is not one drive installed from NVIDIA )
is not the first time I‘ve installing this video card, now the difference is I reset the pc as fabric conditions.
The last time the problem was update the driver; but now the pc don’t want to even start when I install the video card.
Is not totally death, I can see the lights, all the sounds BUT DON’T SHOW ANYTHING ON SCREEN.
If I unplug the video card all pc start normally without any problem.
I know is a very problematic video card but has been working normal until I reset the pc
This video card has been installed from +/- February 2013
Hope for any help
Kind Regards

Hi:
You need to disable secure boot and enable legacy mode when you install a video card on a PC that originally came with W8.
If you reset the BIOS to its defaults, it has renabled secure boot and disabled legacy mode.
Please see this link for more information.
http://support.hp.com/us-en/document/c03653200

210 MINI

I have an HP Mini 210 Windows XP Microsoft 7, The test says Replace Hard disk 1. I need a recovery zip drive.They won't sent me one. I have another HP mini. It crashed under warranty and they sent the recovery zip drive. Sadly we lost it. Can anybody help

Hello kk59. I understand that you need to restore your operating system but lack the zip drive/discs to do so. Is this correct?
Have you tried to use the build in recovery manager to accomplish this? Using this method you do not need any discs. Follow these instructions and let me know if it helps.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Webcam won't start anymore

I'm using HP Mini 210, Windows 7 Starter. The last time I used the built-in cam was 5 days ago. I used it to record a video. No update has been made ever since, but now that I wanna use it again, it won't start. It doesn't show any image when I open the default webcam software, "HP Camera". Even in sites such as webcamtoy, it only shows up blank. The light near the webcam lights up, the cam doesn't seem to work.

Hello PepNisperos,
I understand you state your HP webcam is not working, is that correct? I will be happy to help you.
I need to get the product number for your HP Mini, if you look at the bottom side there should be a sticker with product number or P/N. Here is a link that will hopefully help you locate that tag/sticker.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Cross Fade Playback

I dont seem to be able to get this to work on my Nano. I have the correct software. When I click the check box on the Itunes software, it simply does not fade the songs in and out. Any ideas? Does the Nano support this feature?
Many thanks.
Toshiba A30-210 Windows XP

If you'd like to send feedback to Apple to ask that they include crossfaded playback as a feature in future revisions of the iPod firmware, you can do so on this feedback page.

Stage vs NativeApllication.nativeApplication.activeWindow.stage

Hy, I have one awkward problem... first, what is the difference between NativeApllication.nativeApplication.activeWindow.stage and stage ?
So, I have a windowed application that first thing it does is becoming is closing the window and opens another one so it won't appear in the taskbar. Next it creates a variable named database that creates a Table (if it doesn't exist) and dispatches an Event("TableCreated"). After that it reads some data from the table and dispatches another Event("DataLoaded'). My strange problem is that in order to work my addListeners() function must look like this:
private function addListeners():void
     stage.addEventListener("TableCreated", eventLoadData);
     NativeApplication.nativeApplication.activeWindow.stage.addEventListener("DataLoaded", eventDrawData);
     NativeApplication.nativeApplication.activeWindow.addEventListener(Event.CLOSE, eventCloseApplication);
So why must I use stage.addEventListener for the first one and NativeApplication.nativeApplication.activeWindow.stage.addEventListener for the second one ? If I try anyway else it doesn't catch the dispatched event...
private function createChromlessWindow():void
     stage.nativeWindow.close();
     var options:NativeWindowInitOptions = new NativeWindowInitOptions();
     options.type = NativeWindowType.UTILITY;
     options.systemChrome = NativeWindowSystemChrome.NONE;
     options.transparent = true;
     var window:NativeWindow = new NativeWindow(options);
     window.x = Screen.mainScreen.bounds.width - 310;
     window.y = 20;
     window.height = 210;
     window.width = 310;
     window.stage.align = "TL";
     window.stage.scaleMode = "noScale";
     window.activate();

Using Nano is Cooper S, with Kit

Hi.
I have just purchased a Mini Cooper S, and it has the Ipod lead connected to the stereo. I cannot get my nano to work with it. I created the playlists and it seemed to work, but then the Nano locked up. When i got home, i plugged it into the pc and everything seems ok, but now the ipod is not recognised when i plug it into the car.
Please helppppppppp!
Toshiba A30-210 Windows XP
Toshiba A30-210 Windows XP

grawity wrote:
It seems that crontab uses $VISUAL instead of $EDITOR.
You might want to add this line to bashrc:
export VISUAL=$EDITOR
Absolute Golden. That did it. Thanks alot

Disk Utility: "Modifying Partition Map"

Good Afternoon all. Im not sure whether this is a problem or not but i have run disk utility to partition my hard drive, and as of now it has been running for over 24 hours.
700 Gb Hdd Partitioned at 487 ( Mac OSx ) and 210 ( Windows NTFS )
The 210 was partitioned by Bootcamp and xp is installed and runs fine
I am attempting to partition the 210 by 55 to allow for the inclusion of Vista
I ran Disk utility yesterday around 9 or 10 and since then it has been saying modifying partition map.
i dont believe it's frozen or has stalled because it responds and i have burned a disk using disk utility. however if i attempt to close it it warns me of damage.
so my issue is whether or not i should just wait it out or if there is something safe i can do. Additionally if installing vista there is a bad idea i would like to be advised.
Thanks In Advance

It's most likely stuck and not going to finish. I experienced this once while creating a new partition for testing purposes. Force quiting will loose any unsaved changes including a partition that's being modified but it looks like your only option at this point. It should not affect your current Mac partition however I'm unsure if it will affect your XP partition. Boot camp works well but in general I would say it's not a good idea to try and re-size or split existing partitions that have data. To do what you want to do you could use Boot camp to create another partition but it would only take the space from your Mac volume. You would probably have to backup or make an image of your XP system then start over using Boot Camp to create the 2 partitions of the size you want.
FYI: You would probably have a better chance getting an answer for this question over in the Boot Camp forum.
George

Problems with Nvidia GeForce 210 and windows 8.1

Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
given several blue screen).
I tried to update the drivers for the card but I got the same problem. It was working properly with generic
drivers, and if I went to Computer Administrator me a yellow triangle appeared
on my graphics card and the properties told me the following:
Windows has stopped this device because it has reported problems.
(Code 43 )
My machine is as follows:
Mainboard : Asus P5K SE
Chipset: Intel P31/P35
Processor : Intel Core 2 Quad Q6600 @ 2400MHz
Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : Seagate ST3320620AS ATA Device (320GB )
Monitor Type: LG Electronics L1919S
I just formatted
the computer from scratch, and
I still had the same problem with the graphics card,
so I imagined it would be a hardware problem
and bought NVIDIA GeForce 210.
In the end I
upgraded to Windows 8.1 update 1 with
the latest drivers for the GeForce 210,
and after 6 days running everything correctly, a few days ago
returned to give me problems,
the screen sometimes freezes and will not
let me do anything and after a while
giving me a blue screen and reboots
me, I suspect that the graphics drivers
are giving me problems, and I had to
disable the graphics card and work with
generic drivers from Microsoft, and even then I
was restarted once.
I installed Driver Booster and all the drivers are updated.
Could
anyone analyze
dump files dmp ? Download here
I got another dmp:
C:\Windows\MEMORY.DMP but it is too heavy.
Thanks

yes, I check the dump files
this cause by graphic card, on which graphic card you reformat your PC and update
.NET framework maybe cause this driver corrupted
my suggestion is try using internal graphic card, just for testing
Just in case you don't believe me, please check this dump file
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
SYMBOL_NAME: nvlddmkm+9bbe2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
Followup: MachineOwner
1: kd> lmvm nvlddmkm
start end module name
fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Brightness doesn't work in Windows 7 on Mini 210 HD

Hi,
I've bought a Mini 210 HD a month or two ago, and i promptly removed XP to put Windows 7 Ultimate (32-bit) on it. This has worked more or less OK, but ever since upgrading i have been unable to use the brightness functions of the lap-top in any way. Not only can i not adjust the brightness with the hot keys, Windows will not dim the screen when i remove it from the mains or leave it to idle, and although i can move the brightness slider in the Power Options control panel, it has no effect. (Currently it is on the lowest setting in Windows, but the hardware is still on maximum brightness.)
I have re-installed the Intel chip-set drivers and the HP keyboard drivers a half-dozen times, these don't seem to be the problem. There is also nothing relevant listed in Windows Update, and there are no problem devices listed in Device Manager.
Is there anything i can do about this?
configuration:
HP Mini 210 HD
Windows 7 Ultimate (32-bit)
Intel GMA 3150 driver 8.14.10.1972
Microsoft x86 ACPI driver 6.1.7600.16385

Alrighty, Here ya go! I had this problem also. Got my HP mini 210HD and put Windows 7 on it right away. Brightness wouldn't change, function keys didn't work, brightness slider did nothing.
Solution:
Make sure you download the graphics drivers from HP's website, not Intel's. The brightness setting won't work with the Intel graphics drivers.
Get "Intel Mobile Graphics Driver for Microsoft Windows 7" from HP's website.
I have Windows 7 32bit, so I downloaded this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-78614-1&lc=en&dlc=en&cc=us&...
This should work for you Ohkine.

Install windows on my HP Mini 210-400, dont work because no driver?

Hello,
I tried to install a new Windows on my (titel) HP mini 210-4000, so if I start the installation and come to the Harddriver selection, pick a driver, windows said, that AHCI-driver are missing.
In the BIOS of this Netbook I can't change the Harddrivermode tho IDE, because I don't have this option......-.-
What have I to do now?

Try it again.
BTW..What is the complete product name and product number of your mini. At the end of what you posted there are characters missing. It helps us when we know the exact hardware configuration and we can get that from the product number.
This time use the installer to delete the existing partition create a new partition and format it as NTFS.
Download the Intel Rapid Storage software on another PC and extract the SATA AHCI drivers. You can use either Winrar or WinZip to do that. If you do this ,then you can install the AHCI drivers that you wanted to install before at the F6 install drivers stage of the installation. You will have to go into the registry and check a specific key later on after the install.
You may have to do this a couple of times til it works. Sometimes it takes practice. It is actually pretty simple to run a dual boot of Windows 7 (32-bit) and Linux (Ubuntu)
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

210-4125 will not boot when windows 7 x64 is installed

i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
hoping that some one new might have had the same problem
HP.......................................HP MINI PC 210-4125
model ................................210-4125
Bios ...................................F08
ser no................................ [edited Serial Number by Moderator]
product no.........................A8V56EA#ABU
Ram ..................................4.0 GB
system board ID............... 338d
processor .........................Atom(TM) CPU N2800 1.86GHz
Product configuration ID..0797200000204600000300100
acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
and i get a message on black screen "you are trying to load an opperating system not compatable" or some thing like that
it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
if any one out there is running x64 bit windows 7 on the 210-400 range of netbook can you tel me
1. model no
2.CPU
3.Ram installed
4 bios No
thank you
JB

thank you George
i will bear that in mind next time
i see that you work for HP ? do you have any suggestion's for my problem ?
as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded , but i can not keep the drive connected ?
i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment , i think it is locked out from out side the bios and not from inside.?
any pointers in the right direction would be very helpful ,
many thanks
John

Fit Image CS4: Error: Unable to create Window - OS error [1400]:210

Hi there,
I'm running Vista Ultimate 64 bit Photoshop CS4 Extended and have come across a problem with the Automate/Fit Image script. I have read the other posts here concerning a bug in the script, but I'm not even getting to the stage of the script giving me any options to run - I just get the following in a Script Alert message box: Fit Image CS4: Error: Unable to create Window - OS error [1400]:210
I can see that the script is in the Presets/Scripts directory OK. Anyone with any ideas please?

Thanks for that reply. I tried this again and it's working now. The only thing I can think of is that I have closed and opened Photoshop a number of times since having the problem and that may have fixed it.
I find that if I am doing a lot of work in quick mask mode on large images with the pen tool, after a while, Photoshop starts to develop a very significant lag time, taking a number of seconds to draw the next point or respond to the tool (I'm on Vista 64 bit with 12 GBs of RAM, so it shouldn't be RAM, GeForce 8800 GTS video card 640MB dedicated video memory). I find that I have to frequently close Photoshop to get the tool response time back to normal. Perhaps the inability to draw a dialog box was somehow linked with this kind of problem....

Satellite A40-210 - How to recover XP but disk turns out to run Windows 98?

Ok, I've got a dinausour: Satellite A40-210 But hey, it ran just fine until an antivirus wiped out something crucial (or at least that's what I think), as Windows is no longer able to startup.
Now the error is given: system32\Drivers\Ntfs.sys is unavailable or broken.
I still got my recovery-disks (all 3 of them)
1: tools&utilities CD-Rom
2:product recovery CD-Rom 1
3:product recovery CD-Rom 2
Nr 1 is not responding as reboot and the Product recovery CD-Rom 1 turns out to "recover" Windows 98.
Thing is, I would like to recover at least photos and some documents and whenever possible: get to use it again with all the programes etc that were installed on the hard-disk...
What/how to do this?
As the message of '98 frightens me: this will delete all previous info on disk.
Help, please!

If moving the hard drive to an external enclosure is not convenient, it should be possible to use a Linux live CD to find your files and transfer them to a USB drive.
I managed this with an old laptop whose Windows 2000 installation stopped working. In that instance, it was simply a matter of booting from a Linux live CD (I used Puppy Linux, as it has modest RAM demands). Once the Linux system was up and running in RAM, it allowed me to mount the Windows partition, and to read the files and photos I wanted to recover. It also allowed me copy those files to a USB flash drive.
Easier than I expected. And meant that, with my date safely copied elsewhere, I could relax and try to repair/reinstall the Windows system.

K 210 windows 7

Similar Messages

Maybe you are looking for