K/L frame-by-frame moving not working

Hi all. Normally I can move frame by frame through the timeline by holding K while pressing L or J. But now whenever I press L or J when holding K it plays at normal speed, as though I pressed L/J without holding K. Must have changed a setting somewhere but can't figure out where. Anyone know how to fix?

Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
Tim

Similar Messages

Frames panel: looping button not working

Frames panel: looping button not working
I use Fireworks MX 2004
Frames panel: looping button:
When I set looping to 2, it stops after 2, as it should.
All other values, i.e. 1, 3, 4 etc will go on 'forever'.
What's wrong?
Thank you for your help.
Adrian

This is just a simple exercise.
http://www.tudo.co.uk/testing/looping_problem.png
http://www.tudo.co.uk/testing/looping_problem.gif
In the png file, Frames panel, bottom left, where I can set
looping to
any number, including 'forever', I set the looping frequency
in this
case to 1. So I expect it to stop after one movement up into
the right
top corner and return to bottom left.
When I play this in 'original' or in 'preview' in Fireworks,
the
animation moves continuously instead of stopping after one
round. That
is my 'problem'. Or can I not expect this to work while it is
still in png?
When I export it to gif, it works exactly as wanted - once
only.
Adrian
Alex Mari�o wrote:
> adrian,
>
> Could you post the png file online and explain exactly
what you are
> trying to achieve?
>
> alex
>
> adrian stock wrote:
>
>> Frames panel: looping button not working
>>
>>
>> I use Fireworks MX 2004
>>
>> Frames panel: looping button:
>>
>> When I set looping to 2, it stops after 2, as it
should.
>>
>> All other values, i.e. 1, 3, 4 etc will go on
'forever'.
>>
>> What's wrong?
>>
>> Thank you for your help.
>>
>> Adrian

When i did my last update of Firefox from 3.6 to the version before 5.0 Frame 2.0 did not work. Have you solved this problem in the new version?

When i upgraded Firefox from version 3.6 to the next version I got a message about Frames that did not work. I work as a warehouse manager and we use an application called LogTrade when we ship goods. LogTrade was not working with the version after 3.6, I think it was 4.0? I had to reinstall 3.6 to get it working. Since LogTrade is essential for my work I don't know if I dare to upgrade to version 5.0.

You can try this extension to override compatibility issues,
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Poster Frame and Trim Mode not working properly with post-synced clips

Hi Everyone-
Final Cut Pro seems to be doing something really odd and I'm wondering if anyone else has experienced it and if so what is the fix:
We are shooting a movie on Red with sound coming in on multitrack wav files. We downconvert the R3D files to Prores and then manually sync the tracks in the timeline.
We link the pix and sound and drag them to the bin to make our dailies. They all play, in sync. When we try to set a poster frame the issues begin. If I load the clip into the browser park the playhead on a frame and choose poster frame, the actual frame in the bin is very noticably offset (often by a few seconds).
Also, when I use the trim mode, the frames jump to a different part of the shot during trim. It's like the shot is jumping ahead or back while I hit the frame advance or recede buttons. Once I let go of the button the image jumps to the correct number of frames. But, it's very distracting if I am trying to trim, for example, to just before an actor blinks. I can't trim 1 frame at a time. I have to keep hitting the button, watching the picture jump to a different part of the shot, release the trim button and watch the picture jump back to the now correctly trimmed frame...
As a test I took some of the Prores clips with scratch track sound and brought them into the bin directly from the finder, bypassing the syncing. Using those clips, the trim and poster frames work as expected. Obviously something is going on during syncing.
I assumed maybe because the audio and pix we different lengths the clip was getting "confused", and didn't know where to "start". So, in the timeline with the synced clips, I razor bladed a few shots, linked them, and dragged them to the bin so the audio and video were the exact same length... Same issue.
I have noticed the same behavior on 2 separate Macs so I don't think its a preference or corrupted install issue.
Anyone seen this and have any suggestions?
Thanks,
David

Yes, David, I'm having the same problem under the same circumstances. we're using merged clips made from Prores QTs and multitrk BWF files. In the trim window, the display frame jumps ahead considerably in a frame-by-frame trim, but trims accurately in the timeline. My only work-around has been to use the left/right scrub arrows in the trim window when necessary, which displays the correct frame. Sorry not to have an answer, but I saw a post on another forum from 2007 that speculated it was an FCP 6 bug. Resetting prefs doesn't help.
Tim

Frame access from servlet not working

Dear all,
I am running my servlets on Tomcat 5.5 and using JDK 1.6. I have a small program that uses codecs to access frames from a video file. PreAccessCodec implements Codec interface and PostAccessCodec extends PreAccessCodec. I set the two codecs into the processor's codec chain. The program is implemented as a thread and once started grabs frames and stores the images in a certain interval. The problem is this: whenever I start the thread from a main program, everything runs without a glitch. However, when I put the code in init() method of the servlet, I get the following error message:
The input format is not compatible with the given codec plugin: com.mapper.utils.PostAccessCodec@69d02b
Failed to realize: com.sun.media.ProcessEngine@1478a43
Cannot build a flow graph with the customized options:
    Unable to add customed codecs:
      com.mapper.utils.PreAccessCodec@15356d5
      com.mapper.utils.PostAccessCodec@69d02b
Error: Unable to realize com.sun.media.ProcessEngine@1478a43 I am using netbeans 5.5.1 to deploy my servlets. I doubt that the problem is with classpaths because the servlet doesn't complain when I am using JMF's classes like Processor.
I would really appreciate any help.
Thank you.
Message was edited by:
calculemus

The GE.iH() method should return false for
a ..head-full ..en-headed, not headless
environment, and I expect (from what you
reported above) that will return false for both
your servlet and application, and is apparently
not the problem.It returned false when I tried GE, and it was not the problem as you suggested. However, I now noticed in the logs:
java.awt.HeadlessException
I use Netbeans for the development, and I tried using -Dheadless=true and -Dheadless=false, it did not change anything...
I think it is time to check that assumption
more carefully.
My impression is that PreAccessCodec and
it's 'Post' equivalent are mentioned a lot in JMF
example code, but are custom classes,
built to suit the use at the time. Did you write the
Pre/PostAccessCodecs for this app.?Yes I customized them from the JMF sample codes. They are in the classpaths and are correctly read by the servlet. I did some logging and I actually saw that the code inside Pre/PostAccess was logging when my servlet was run.
>
So, what I am thinking, is that while the JMF
based Processor class may well be on the
server's
classpath, perhaps Pre/PostAccessCodec classes
are not.
oes a jar appear in the WEB-INF/lib directory,
that contains the Pre/PostAccessCodec.class?
Failing that, are the classes themselves in
WEB-INF/classes/(sub-dir according to package name)/ ?Nevertheless, just to double check I checked WEB-INF directory and the classes appear correctly in their appropriate 'package-folders'.
I figured out where exactly the thread was not running. In my PostAccessCodec class, I had overloaded getSupportedInputFormats() function to return RGB format.
public Format [] getSupportedInputFormats() {
Format [] fomats = {new RGBFormat()};
return fomrats;
When I changed it to return {VideoFormat()}, the codec initializes, but I get nothing when I want to access the frame.
I guess I will have to start another thread.
@moderators, please move the post if it is inappropriate to put it in this thread, my apologies.
The problem is still there and I am not able to get the frame access not working from the servlet. :(
Message was edited by:
calculemus
Message was edited by:
calculemus

Post Moved Not working with Xbox

Post moved http://community.bt.com/t5/Other-BB-Queries/Not-working-with-xbox/td-p/479565
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Yea, in my honest opinion the wireless on the HH3 is not the greatest at all, the channel switching for me causes problems which causes my external devices to lose connection for a few seconds at times.
Is there no way you could just try it? even for long a game or so just to rule out any possibilites? Also, since your at the other end of your house, that is also a problem even when your powerline adaptors.
If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution

Link from flash file/moving not working on a page

I will apologize first for what maybe a very elementary
questions. I was sent an swf file to add to a web page. I got the
movie to run on some of the pages where I inserted it into a
template and the template updated those pages. I think had to
insert it into another page and the movie does not work there. Does
this have something to do with the script in the script folder? A
conflict of some sort?
Also, I need to link the file a URL and putting <a
href> brackets around it is not working. Does the link to the
page have to embedded in the swf file?
Thanks for any help on this.
URL to see pages
Movie working but no link:
http://www.grantwrangler.com/advertise.html
Movie not even showing up:
http://www.grantwrangler.com/index.html

> Also, I need to link the file a URL and putting <a
href> brackets around it is
> not working. Does the link to the page have to embedded
in the swf file?
wrapping an A HREF tag around a flash .swf object will not
work.
the link has to be "in" the swf, back when it was an FLA file
in flash.
Or- the .swf has to have actionscripting in it so that it
will take a url as
a parameter.
On the flash not showing--
Random observations from a quick look.
There is no \ backslash in a web path or url.
you can usually "get away with it" on a windows server, but
it's incorrect
and something to avoid.

<link type="text/css" rel="stylesheet"
href="build\fonts\fonts.css">

<script type="text/javascript"
src="build\yahoo\yahoo.js"></script>
<script type="text/javascript"
src="build\dom\dom.js"></script>
<script type="text/javascript"
src="build\event\event.js"></script>

<script type="text/javascript"
src="build\calendar\calendar.js"></script>
<link rel="stylesheet" type="text/css"
href="build\calendar\assets\calendar.css" >
The javascript call to show the flash file contains an
absolute local path:
'file:///Macintosh HD/Users/user/Documents/ Work/Nimble Press
/Grant
Wrangler/Website/GW ADs/tiged
The noscript tag uses an absolute local path:
<param name="movie" value="file:///Macintosh
HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf">
<param name="quality" value="high">
<embed src="file:///Macintosh HD/Users/user/Documents/
Work/Nimble Press /Grant Wrangler/Website/GW
ADs/tiged.swf" quality="high"
pluginspage="
http://www.adobe.com
it's also not a good idea to put things in a folder using a
blank space, and
whose name contains the word "ADs"
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Photoshop video frames to layer is not working on windows PC

Hi,
I am using photoshop CC and it says video (It does not support video on this version of windows.
I am using windows 8 32bit, 8gb ram, i7 equlent AMD 64 bit processor, 1gb graphics card.
Please help me to fix this issue.
Thank you

Hi,
Unfortunately, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

Spacebar + Moving not working

A while ago it became impossible for me to use the most desired function in Photoshop; I could no longer drag the display by simply holding the spacebar. After looking or some information online, it came to my attention that many people were experiencing the same issue. Appearantly there are many rather 'small' settings that can cause this issue.
First of all... ALWAYS make sure to have your software up to date when you are experiencing issues with your software!
In most cases this issue is being caused by external programs. Therefore I'd recommend you to troubleshoot these programs first.
Issue caused by external programs.
Mozilla Firefox, Google Chrome, and in some cases other applications can cause this issue to arise. Try shutting down programs trough taskmanager. Check one by one to see if, and which application is causing the issue.
On laptops the mousepad can have additional settings that could conflict with the shortcut. In most cases this is some kind of a delay on the touchpad to prevent unintentional clicking while typing (TouchGuard, etc..). Check these settings if you are working on a laptop.
Issue caused by Adobe Photoshop.
When starting Photoshop from an user account other than your own, it should start from scratch. Seeing it does not contain your personal preferences and settings, this is the best way to make sure that the settings are fine.
In case you are unable to use a different account, or want to troubleshoot somewhat more, check the following:
By holding down the CTRL, SHIFT and ALT buttons while Photoshop is starting, this will give you the option to reset all settings.
Open the following directories, look for the Photoshop folders and edit the folder name by adding .old at the end.
%localappdata%\adobe
%appdata%\adobe
Re-install software. When performing this step, make sure the folders shown above are renamed as well.

Thanks!
I suspected the same .But in the keyboardviewer When im pressing cntl+spacebar it is showing the keys have been pressed visually. Thats what is making me to worry more.
But Wish to say that I bought a Microsoft Keyboard and it is working fine as expected. The previous one is
DAT keyboard and it has been said it is compatabile with Mac.
Im using Parallels for Running Windows8 VM in Mac and i have just moved to mac from MS Windows.
Message was edited by: gk_sezhian

Help!!! Simple Button not working

I put 5 buttons in a layer on the created an "action" and
"labels" layer and entered the following code to go to that labeled
frame but it is not working!!!
This looks simple, I feel like an idiot asking this question.
Help!!!
Thanks to all who respond.

If you're using the web interface, you need to use the attach
code button...
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Cross-frame scripting is not working in Safari 3.0.4. Minimal example code.

Hello,
I've found that cross-frame scripting is not working in Safari 3.0.4, as it worked
ok on Safari 3.0.1, and in other browsers I tried: Firefox, Mozilla, IE.
document.domain property is set to "ds2ps.net", correctly to the best of my knowledge
in the frameset and in both frames. Both frames and frameset are loaded
from subdomains of the same domain "ds2ps.net"
Please have a look at this mimimal example:
http://frameset.ds2ps.net/frames-test/frameset.html
Press buttons to get alert with value of a variable defined in the frameset
and in the first frame.
This gives "undefined" in Safari 3.0.4, and give following message in Safari
JavaScript console:
Unsafe JavaScript attempt to access frame with URL http://frameset.ds2ps.net/frames-test/frameset.html from frame with URL http://frame2.ds2ps.net/frames-test/frame2.html. Domains, protocols and ports must match.
Works ok in all other browsers and in earlier versions of Safari.
Apperently, I'm doing something incorrectly.
I would appreciate if Apple Safari developers have a look at this problem and suggest solution.
My company is developing web application which depends on cross-frame scripting,
and we would like to continue supporting Safari browser.
Thank you,
John

Thank you, iBod,
We've submitted this bug at http://bugs.webkit.org
Bug 16444: Cross-frame scripting not working in Safari 3.0.4 despite proper document.domain set in all frames
Thank you for your suggestion!

Effects and key-frames not working on some clips Premiere CC 2014

Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
MSI GT60 Laptop:
Intel Core i7 4800MQ (2.70GHz)
16GB Memory 1TB HDD 128GB SSD
NVIDIA GeForce GTX 880M 8GB
2880 x 1620 16:9 3K Display
Windows 8.1 64-Bit

Here is the exact screenshot. Now I'm also trying other effects as stated in my original post. But this effect is just an example. Is there really something that I'm doing wrong here? Or am I forgetting something? Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
I wish that I could post a video, but I don't know how.
Please let me know what I need to do to make this work properly.
TEX

Document Class not work when I shift my MovieClip to 2nd Frame.

Hello,
All my content is at 1st frame of my FLA file...and I'm using Document Class... When I try to shift my content to 2nd frame, so I can use 1st frame for preloader.. but its not working...
This is my document class... Basically at 1st frame I'm loading external jpg image to a MovieClip..
Is it possible, I can **** my MovieClip and other content to 2nd frame of the timeline... ??? and Document Class work???
Thanks...
package com.ahmad.bg
     //import all classes
     import caurina.transitions.Tweener;
     import flash.display.Loader;
     import flash.display.MovieClip;
     import flash.display.Sprite;
     import flash.display.StageAlign;
     import flash.display.StageDisplayState;
     import flash.display.StageScaleMode;
     import flash.events.Event;
     import flash.events.MouseEvent;
     import flash.net.URLRequest;
     public class MainClass extends MovieClip
          //create variables
          private var loader:Loader;
          private static const IMAGE_PATH:String = "bgs/bg.jpg";
          public function MainClass() {
               stage.align = StageAlign.TOP_LEFT;
               stage.scaleMode = StageScaleMode.NO_SCALE;
               stage.addEventListener(Event.RESIZE, stageResize);
               //load external image
               loader = new Loader();
               loader.load(new URLRequest(IMAGE_PATH));
               loader.contentLoaderInfo.addEventListener(Event.COMPLETE, showImage);
               pic.addChild(loader);
          private function showImage(e:Event):void
               try {
                    e.target.content.alpha = 1;
                    Tweener.addTween(e.target.content, { alpha:1, time:1, transition:"easeOutSine" } );
                    e.target.content.smoothing = true;
               } catch (e:Error) { };
               stageResize();
          private function stageResize(e:Event=null):void
               pic.x = 0;
               pic.y = 0;
               pic.scaleX = pic.scaleY = 1;
               if ((stage.stageHeight / stage.stageWidth) < pic.height / pic.width) {
                    pic.width = stage.stageWidth;
                    pic.scaleY = pic.scaleX;
               } else {
                    pic.height = stage.stageHeight;
                    pic.scaleX = pic.scaleY;
               pic.x = stage.stageWidth / 2 - pic.width / 2;
               pic.y = stage.stageHeight / 2 - pic.height / 2;
               bottomNav.x = Math.floor(stage.stageWidth / 2 - bottomNav.width / 2);
               bottomNav.y = Math.floor(stage.stageHeight - bottomNav.height - 0);

If you have code in your main class that references specific movieclips on the stage, they have to be on every frame you plan on using.
If you have a movieclip named "pic" on frame 2, but you are referencing it right away in the main class, which starts on frame 1, then it is looking for a movieclip that does not exist until you move it to frame 2

Fit Frame to Content Bug in InDesign CC? Keyboard shortcut not working

Using InDesign CC 9.1 in Mountain Lion, recently installed and has been working fine except I noticed that the keyboard shortcut for Fit Frame to Content won't work, even though the other frame fitting shortcuts work. I searched this forum and elsewhere to see if there was any reported bug for this but came up with bubkis.
When using the contextual menu option or toolbar button for Fit Frame to Content I don't have any problem. I thought perhaps my own set of shortcuts had overridden this default shortcut somehow so I reverted to the default set without any luck. I quit and re-opened ID with the default shortcut set, no luck either.
In the Keyboard Shortcuts menu options, when I try to assign Opt-Cmd-C it does say it's already assigned to that function. I'm at a loss here to understand why this one particular function isn't working as a shortcut. Any ideas why? What can I do? Thanks.

It's working for me in InDesign CC on the same operating system.
Here's a couple ideas:
Make sure there's not a Mac OS X system shortcut already set to this shortcut. Go to System Preferences > Keyboard Shortcuts and check all the tabs for existing system shortcuts (I didn't find any but maybe you had set one). InDesign CC now gives preference to the system.
You could also try restoring your InDesign preferences.

K/L frame-by-frame moving not working

Similar Messages

Maybe you are looking for