K_SETTLEMENT_RULES_UPDATE the settelment rule

Hi,
Ive created the settement rule. its fine.. if the end user change the Maintenance activity type[cobrb-ilart] in iw32.
the settelment rule should be updated or re-write..
ive got K_SETTLEMENT_RULES_UPDATE. function module.
how to pass the parameters to above f.m. bcoz in my save function exit ive got only cobrb itab data..?
Plz let me know hwo to do it?
Regards
Edited by: balaji kiran on Apr 15, 2010 8:24 AM

Hi Balaji,
I have created WBS elements using BAPI but in tht BAPI there were no fields relating to Settelement Rules.
I need to update Account Assignment category and Settlemnt Recvr Etc.
Can u please tell me how to upload r can u please give me the sample code.?
Thanks in Advance.
Sameer

Similar Messages

Problem with Settelment Rule for iw32

Hi,
Good day guys
Iam getting the problem while creating the settelment rule creation. Ive got a problem with " wa_srules-SOURCE = '1' ".
If i wont fill this field, settelment rule is going to be created. but i need to fill this field as per requirement.
Ive got a error message "Enter an Existing source assingment for souce stracutre CS.
Plz any one guide me, how to overcome this prob
DATA: srules TYPE srules_ext OCCURS 0,
 wa_srules TYPE srules_ext,
 lv_mandt type SYMANDT.
DATA IT_OBJNR TYPE STANDARD TABLE OF IONRB WITH HEADER LINE.
DATA: ls_copadata type BAPI_COPA_DATA occurs 0.
DATA: ls_cobrb type standard table of cobrb with header line.
IT_OBJNR-OBJNR = CAUFVD_IMP-OBJNR.
APPEND IT_OBJNR.
break-point.
CALL FUNCTION 'K_SRULE_PRE_READ'
EXPORTING
 I_PFLEGE = ' '
TABLES
 T_SENDER_OBJNR = IT_OBJNR
* T_COBRA =
EXCEPTIONS
 WRONG_PARAMETERS = 1
 OTHERS = 2
CALL FUNCTION 'K_SETTLEMENT_RULE_EXISTENCE'
EXPORTING
 objnr = caufvd_imp-objnr
* FLG_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
 RULE_NOT_FOUND = 1
 OTHERS = 2
CALL FUNCTION 'K_SRULE_CREATE'
EXPORTING
 i_objnr = caufvd_imp-objnr
* I_CHECK_ONLY_LOCAL = ' '
* IMPORTING
* E_COBRA =
EXCEPTIONS
rule_already_exists = 1
OTHERS = 2.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'FUL'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
wa_srules-SOURCE = '1'.
wa_srules-settl_type = 'PER'.
wa_srules-percentage = '100'.
*wa_srules-amount = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
CALL FUNCTION 'K_ORDER_SRULE_ADD'
EXPORTING
 object_no = caufvd_imp-objnr
* IMPORTING
* FLG_RULE_INSERTED =
tables
 srules = srules
IF sy-subrc = 0.
commit work.
Endif
Regards
Edited by: balaji kiran on Mar 26, 2010 10:18 AM

Hello Vitaliy,
Nice to "see" you here
I did try remodelling and it works fine here. A constant value rule really gets a constant value.
The user exit option also works fine here. Here's an example of a very simple user exit for a KF:
method IF_RSCNV_EXIT~EXIT.
FIELD-SYMBOLS: <l_s_old> TYPE ANY,
 <l_fillfield> TYPE ANY,
 <l_newfield> TYPE ANY,
 <fs_kfsource> type any.
* Assign the references to field symbols
ASSIGN c_r_newfield->* TO <l_newfield>.
ASSIGN i_r_old->* TO <l_s_old>.
* We will use the value of the 0AMOUNT KF. The value of the new KF is 0AMOUNT + 5.
ASSIGN COMPONENT 'AMOUNT' OF STRUCTURE <l_s_old> TO <fs_kfsource>.
<l_newfield> = <fs_kfsource> + 5.
endmethod.
For a KF, you can check the fields of the FACT Table (/BIx/Fzzzz) to know the field names for your source KFs.
Hope this helps.

Differerence betwin distubution rules and settelment rule

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
Hi gurus any doby explain the difference betwin ditibution rule and settelment rule.

Hi friend,...
The distribution rule is part of the settlement rule. You specify the following for a settlement sender:
Settlement receiver
Settlement share (percentage or proportional)
Settlement type (periodic or cumulative)
Validity of the distribution rule
The system automatically assigns a settlement rule to the production order when the order is created. The assignment is carried out via the default rule defined in Customizing.
The settlement rule includes one or more distribution rules for the production order. The distribution rule consists of a cost receiver, a settlement share and a settlement type:
The settlement receiver determines to which cost object the actual costs of the production order are to be settled. Possible receivers include
a material
a cost center
an internal order
a sales order
a project
a network
a fixed asset
The settlement share determines the percentage rate or the equivalence number to distribute the costs to the individual cost receivers.
The settlement type determines whether all the costs are settled which were incurred for the order (full settlement) or whether the costs collected on the order are to be settled periodically (periodic settlement).
for more details u may go the following link...
http://help.sap.com/saphelp_47x200/helpdata/en/e9/7a0716cde011d19eb4080009b0db33/frameset.htm

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

I am having trouble with rules in mac mail. The first rule window shows but i cannot open a second filter rule!!

Hi
I am trying to create rules that would copy the incoming email to a cloud folder ( depending on sender ) and move the actual email from the inbox to a local folder on my laptop.
The problem i seem to be having is the first rule ( regardless of whether it is copy or move ) shows ok but when i press the + button it does not bring up a new filter window as it used to.
Totally confused on this one, can anyone help?
Thanks
Oh, latest versions of everything!!!!

I'm having difficulty visualizing what is wrong but try some basic steps first:
Launch Safari while holding a Shift key - this will start Safari with just your Home page
If you can see Reset Safari from the Safari menu, try that.
In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

GR/IR expenses not affected with the settlement rule run process in the GL

Please neglect by previous post with the same title
There is a problem I face while running the settlement rule process related to internal orders on the GR/IR expenses.
According to the internal order settlement rule every expense associated to an Internal order no. whether its an account payable or manual journal accounts it should be settled (distributed) on the cost centers specified in each internal order after the monthly settlement run process is done through T.Code "KO8G", and this actually happens on the entries that are booked manually through T.Code "FB50", but the GR/IR entries is the biggest problem, it didn't reflect the settlement rule distributions in the GL it just gives me the original transaction once its was automatically created through T.Code "MIGO" they are only allocated to a one profit center with no cost center and without being distributed to a multiple cost centers according to the distribution strategy.
After a long search I found that the cost center distribution occurred only on a secondary none GL account named A&P Settlement (720010), all GR/IR expenses was settled correctly only on this account not through the ordinary GL accounts (e.g. Gifts, printed materials) and of course the correct distribution didn't appear in the GL,
So is there a transaction or any way to allocate the GR/IR expenses to there correct cost centers with the correct cost element in the GL?
Is there anything to do with the GR/IR calculation that depends on quantity base not value base?
The Process as follows:
(1) Creating Internal order with a settlement rule (E.g. Cost center 1 (50%) Cost center 2 (50%)
2) Creating a purchase order associated to an internal order
3) The Goods received and creating the GR transaction T.Code "MIGO"
Acc/DR Expenses accounts
Acc/CR GI/IR Account 400301
Profit enter ###### (eg. 111177)
Cost Center <blank>
Internal order no. ####### (e.g. 9810512)

4) Closing the GR/IR accounts when receiving the invoice T.Code "MIRO"
When we receive vendor invoice:
Acc/Dr GI/IR Account 400301
Acc/Cr Vendor Account
Profit enter ###### (eg. 111177)
Cost Center <blank>
Internal order no. ####### (e.g. 9810512)
5) Performing the Internal order settlement rule run process
(N.B. By entering the report of the cost center (Actual/Plan/ Variance) T.Code S_ALR_87013611
I found that GR/IR expenses was not charged on the concerned cost centers as shown in the GL )
Your Reply is highly appreciated

Thanks for your kind reply,
But is there a way solve this problem?
And what is the use of leaving a field in the account assignment tab for an internal order while creating a PO and it will not take advantage of the settlement rule????????
And as you know the internal order settlement is a way to create a multiple account assignment
Can we solve the problem by making an automatic fake transaction that reverse the value of the GR/IR and creating another transaction can apply on it the settlement rule??
You know that settlement rule process is one of the best features in the SAP system it save time and effort to make distributions manually

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How to get an account with an IsICP -"R" attribute calculated in the HFM Rule file

Till recently everything was going fine with the calculations in our HFM setup ( Version 4.1)
We have say around 8 Expense accounts which roll up into a Parent account say ALL446 which finally rolls up into Operating Expenses.
Operating Expenses
|__ parent account
 |_INVALO
 |_ALL446
 |__222446
 |__242446
And we have a calculation in the rule file as below
HS.EXP "A#BE FIXED COST = A#Operating Expenses +A#SGA - A#BE VC OP F10"
This was calculating correctly till we did the below change
Added IsICP attribute to couple of accounts say 222446 and 242446 ( in the above example) in the metadata which finally rolls up into Operating Expense.
Note: we did not add any Plug account attribute to the accounts
Now the problem what we have in hand is -> Fixed Cost is not calculating correctly.- It happens that the two accounts for which we added the IsICP are not showing up in the calculation and the data in those two accounts are not adding up in Fixed Cost.
POV in GRID/Excel -> actual,2013,periodic,<Entity Currency>, ICP Top, AllCustom1, AllCustom2, AllCustom3, None( for custom4)
But when we retrieve Operating Expenses in Excel - it is showing the correct amount, even in the grid - but looks like when the rule tries to calculate Fixed Expenses using the above rule - these accounts are not adding up in the Operating expenses.
I tried the formula ( to check what number is coming into Fixed cost ) - the result is zero - But in the grid/excel I see amount for acct2. Same POV as above
HS.EXP "A#BE FIXED COST = A#222446"
and if I add & Tops to the account like below ( getting some weird number instead of what is there in acct2)
HS.EXP "A#BE FIXED COST = A#222446" & Tops
Questions:
1) Where exactly I am going wrong ?
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
3) What will happen if we do not have a Plugaccount for the IsICP account ?
4) How to correct the formula to make sure I get the number in the acct2 into Fixed Cost??
5) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
6) Is it possible to get the exact number what we have in 222446 into BE Fixed Cost account via Rule?- why I am not getting it
Notes:
BE Fixed Cost-> account type -"Expense", IsCalculated - yes, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
Operating Expenses->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
INVALO ->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember -none, Custom3TopMember- none,
enabled allcustom1,2,3,4aggregations
Problematic account 222446 -> "Expense", IsCalculated - No, IsConsolidated - yes, IsICP- R, Custom1TopMember - Operations, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
The Entity on which I am trying to get the data( mentioning wherever I have attributes for this entity)
DefCurrency - DEM, Allowadjs- enabled, IsICP - enabled, Userdefined 2 - financial, - SecurityasPartner attribute - is not selected through out the applicaiton.
Variable
Tops = ".I#[ICP Top].C1#AllCustom1.C2#AllCustom2.C3#AllCustom3.C4#[None]"
tried attaching the attachments ( but service is unavailable)
Waiting for all of your valuable suggestions..

1) why was I not getting the formula right when I use & Tops
I'm assuming that BE Fixed Cost has N for IsICP, in that case you can not write to invalid intersections as it would attempt to use the same ICP information
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
No
3) What will happen if we do not have a Plugaccount for the IsICP account ?
It will not run eliminations
4) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
If you want it to rollup, yes you would need that. We have all Parent accounts as isICP set to Y and top member to ICP Entities so that they roll up
5) which will have priority the rule or the Grid where we have the calculated member like the BE Fixed Cost - because in the grid I had icptop, allcustom1,2 3 and when had & Tops to the account - I got some weird numbers...
I'm not following the question here, grids are just really a display mechanism, rules will handle all of the calculations.

How to delete blank space from value of Infoobject in the transfer rule

does anyboady know how to write a routine in the transfer rule in order to delete ending blank spaces from value of Infoobject 'ORDTEXT'. E.g. value: 'ABM '? After routine, the result should be 'ABM'.
Thanks for any input.

Deleting 'ending blank spaces' from a character type field (ie info-object or text) in SAP is not meaningful. For all usage, a char type field of length 8 having value 'ABM ' is same as 'ABM'.
Ok, HTML is changing the display in the above, so let me restate it
For all usage, a char type field of length 8 having value 'ABM_____' is same as 'ABM', take the underscore character (_) in the first string as a placeholder for space character.
Edited by: Ajay Das on Jul 29, 2009 12:07 PM

How can I view/edit the CSS rules that apply to an Order Registration Layout ?

*Note: I am new to web design and I did not create the site that I am working on. I am also very VERY clumsy with CSS at the moment *
I have just begun using Dreamweaver to work on a Business Catalyst site. I am attempting to edit the CSS of the layout for the Order Registration Form. The CSS is applied from the site-wide template that is assigned to the Order Registration Layout. When viewing the layout in Dreamweaver, it does not display any CSS info for the page. However, when viewing the live page for the Order Registration, it is clear that CSS is adversely affecting the layout.
Is there a way to link the css rules from the site-wide template to the Order Registration Layout? Or should I just add a new CSS rule directly to the Order Registration Layout (possibly overriding the site-wide template's CSS)?
Thanks!
Nate

I've used Firebug as well as the Webkit developer tools in Chrome and Safari which have surpassed Firebug in my opinion. But they all suffer from the fact that the changes you make in them have to later be applied to your code which means you have to take the extra steps of trying to remember what all changes you made in Firebug and copying and pasting them back into your files. Whereas in Dreamweaver you can Inspect, make changes directly to the code in your file, and you're done. Not happy with the last few changes? Undo. Want to start completely over? File > Revert.
Dreamweaver has excellent tools for determining what css is being applied to an element and by what means. And it's a more streamlined and direct workflow where you work directly in your code. I still use Firebug and the others from time to time though. But only for very basic "spur of the moment" testing. And usually only when I don't have immediate access to the raw files.

Itu00B4s possible to change the Distribution rules for a order type RM01 ??

Hi Experts:
I need to change the settlement rule which is automatic created at the moment that you create a Cost colector (class order RM01) transaction KKF6N..
but when I go into KKF6N transaction and I select the "change" option and after that I go into settlement rule screen, I can´t change the distribution rule.
I would need to change the settlement type from "PER" value to "TOT" value.. It´is possible in this kind of Cost colectors??
Thanks and regards!
Manuel

Hi,
Please note that you will not be able to change manually the settlement rule for a cost collector.
When you save, the system creates a settlement rule for the product cost collector.
The settlement rule for the product cost collector always specifies the distribution rule "100% to material" and the settlement type is always PER (periodic).
Also refer the note 388457 in which one of the paragraph it says "As of Release 4.5, a special settlement rule is generated when you create a product cost collector (with procedure 5: delivery value for product cost collector). You cannot subsequently change this settlement rule".
regards
Waman

Exit in the Validation rule is not working in Project system

Hi Team,
I have created a validation rule for wbs and inserted a exit under check condition. But when i trying to test the validation rule, exit is not called. Is there any other step to activate the exit??
Best regards,
Dileep

Hi,
The code you have written in the exit must be activated. Please check the same.
Regards,
Harsh.

Error while Loading the validator-rules.xml in Struts 1.2

Hello Guys,
I am trying to use the Struts 1.2.4 on Jdk1.3 inside WSAD5.1 and i get the following error when loading the application. It breaks on the fist line inside validator-rules.xml witht hte following error. My first line in the validator-rules.xml is
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.1.3//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_1_3.dtd">
I do have the commons-validator inside the Lib folder. I also tried it out by removing the above reference to dtd in the validator-rules.
Can any one help me with some suggestions on something i am missing.
----------------------ERROR BELOW------------------------------------------
[11/23/04 17:45:44:772 EST] 3ca45923 ValidatorPlug I org.apache.struts.validator.ValidatorPlugIn Loading validation rules file from '/WEB-INF/validator-rules.xml'
[11/23/04 17:45:44:772 EST] 3ca45923 ValidatorPlug I org.apache.struts.validator.ValidatorPlugIn Loading validation rules file from '/WEB-INF/validation.xml'
[11/23/04 17:45:45:053 EST] 3ca45923 Digester E org.apache.commons.digester.Digester Parse Error at line 1 column 17: Document is invalid: no grammar found.
[11/23/04 17:45:45:063 EST] 3ca45923 Digester E org.apache.commons.digester.Digester TRAS0014I: The following exception was logged org.xml.sax.SAXParseException: Document is invalid: no grammar found.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)
org.xml.sax.SAXParseException: Document is invalid: no grammar found.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)
[11/23/04 17:45:45:093 EST] 3ca45923 Digester E org.apache.commons.digester.Digester Parse Error at line 1 column 17: Document root element "form-validation", must match DOCTYPE root "null".
[11/23/04 17:45:45:093 EST] 3ca45923 Digester E org.apache.commons.digester.Digester TRAS0014I: The following exception was logged org.xml.sax.SAXParseException: Document root element "form-validation", must match DOCTYPE root "null".
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1591)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:233)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:164)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:839)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:332)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doInit(StrictServletInstance.java:82)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._init(StrictLifecycleServlet.java:147)
at com.ibm.ws.webcontainer.servlet.PreInitializedServletState.init(StrictLifecycleServlet.java:270)
at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.init(StrictLifecycleServlet.java:113)
at com.ibm.ws.webcontainer.servlet.ServletInstance.init(ServletInstance.java:189)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.addServlet(WebAppServletManager.java:870)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadServlet(WebAppServletManager.java:224)
at com.ibm.ws.webcontainer.webapp.WebAppServletManager.loadAutoLoadServlets(WebAppServletManager.java:542)
at com.ibm.ws.webcontainer.webapp.WebApp.loadServletManager(WebApp.java:1277)
at com.ibm.ws.webcontainer.webapp.WebApp.init(WebApp.java:283)
at com.ibm.ws.webcontainer.srt.WebGroup.loadWebApp(WebGroup.java:387)
at com.ibm.ws.webcontainer.srt.WebGroup.init(WebGroup.java:209)
at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:987)
at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:136)
at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:356)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:418)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:787)
at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:354)
at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:575)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:271)
at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:249)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ApplicationServerImpl.start(ApplicationServerImpl.java:125)
at com.ibm.ws.runtime.component.ContainerImpl.startComponents(ContainerImpl.java:536)
at com.ibm.ws.runtime.component.ContainerImpl.start(ContainerImpl.java:413)
at com.ibm.ws.runtime.component.ServerImpl.start(ServerImpl.java:183)
at com.ibm.ws.runtime.WsServer.start(WsServer.java:128)
at com.ibm.ws.runtime.WsServer.main(WsServer.java:225)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:41)
at java.lang.reflect.Method.invoke(Method.java:386)
at com.ibm.ws.bootstrap.WSLauncher.main(WSLauncher.java:94)
at com.ibm.etools.websphere.tools.runner.api.ServerRunnerV5$1.run(ServerRunnerV5.java:97)

This is a JDeveloper Forum, not a Websphere one. A better place to ask this question woudl be on a Forum that deals with WSAD or the Struts user list (http://struts.apache.org/learning.html)

Error while activating the update rules related to Inventory

Hi,
In standard Cube 0ic_c03, I am including a field 0MAT_DOC that is available in the transfer rules of 2lis_03_bx. And when I include that info object in the cube my update rules are getting deactivated.
When I try to activate the update rules, I am getting the following error message:
1. InfoSource 2LIS_03_BX is only set up for the initial run for non-cumulatives.
2. IC=0IC_C03 IS=2LIS_03_BX error when checking the update rules.
Requesting you to please guide me on how do I go about solving this issue.
Thanks & Regards.

Hi Ganesh,
For implementation of inventory in the BW side, first you need to carry out following steps sequentially:
1. MCNB: Filling set up tables for initial entry of stock balances from 2lis_03_BX
2. OLI1BW:Filling set up tables for stock movements from 2lis_03_BF.
3. OLIZBW:Filling set up tables for inventory revaluations from 2lis_03_UM
Check the Business content cube 0IC_C03.
Also check the document how to inventory management.
For report install the business content report for the cube 0IC_C03 and check it.
check this link for inventory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Pcrao.

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

K_SETTLEMENT_RULES_UPDATE the settelment rule

Similar Messages

Maybe you are looking for