[K1]- Could not open the SD card door with the clip pin
Got my 32Gb K1 two days ago.
Really had a hard time on opening the SD card door. Now understand what was in the reviews, 'Lenovo made it unnecessary difficult to open the SD card door'.
Watched the Youtube video several times, then I tried to poke the clip pin into the hole, tried different angles, the door just opened a little bit (like 0.5mm), could not open more.
Any tricks, what angle, how deep should the pin stick in? Do I need to push really hard?
If I can not open the door, I have to return it. I can tolerate software bugs, wait for updates. But without sd card function, there is no point to keep the unit. So frustrated now.
Thanks for your help.
Solved!
Go to Solution.
Well the great thing about it is making it hard for a thief to take off with your 32g SD Card.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!
Similar Messages
-
Could not open the device file /dev/nvidia0
and yet:
[root@mythfe01 dev]# ls -alh nvid*
crw-rw-rw- 1 root root 195, 0 Mar 26 16:06 nvidia0
crw-rw-rw- 1 root root 195, 255 Mar 26 16:06 nvidiactl
and:
[root@mythfe01 dev]# lsmod | grep nv
nvidia 4083280 0
agpgart 28872 1 nvidia
but:
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
I am using a homemade kernel, but i can't think of a reason why that would prevent things from working properly considering the module loaded ok.
Any thoughts?Moo-Crumpus wrote:Do you use udev? Have a look if there is a ruleset for nvidia, I remember there was one. Afaik, nvidia should be owned by the video group - well, once it was, I am not up to date and have no arch machine with nvidia right now.
Could anyone specify how to do that? I have the exact same problem, although I use the default kernel that came with Arch.
NVIDIA: could not open the device file /dev/nvidia0 (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering.
[kristjans@myhost ~]$ cat /proc/driver/nvidia/cards/0
Model: GeForce 6200 TurboCache(TM)
IRQ: 22
Video BIOS: 05.44.02.52.00
Card Type: PCI-E
DMA Size: 39 bits
DMA Mask: 0x7fffffffff
[kristjans@myhost dev]$ ls -alh nvid*
crw-rw---- 1 root 27 195, 0 2007-10-06 19:10 nvidia0
crw-rw-rw- 1 root 27 195, 255 2007-10-06 19:10 nvidiactl
[kristjans@myhost dev]$ lsmod | grep nv
nvidia 6829684 40
i2c_core 20352 2 nvidia,i2c_piix4
agpgart 27224 2 nvidia,ati_agp
Last edited by KSiimson (2007-10-11 04:23:18) -
Crystal Report Runtime Error 9.0.Could not open the report
Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.NHi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan -
my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in
Does the iPod connect to other networks OK?
Do other devices now connect and work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
When I turn on my Ipad and click on Safari it says Safari could not open the page because the server stopped responding.but I can get on internet with Google Chrome. What is the problem and how can I repair it?
Found the answer in the more like this panel and now working. Thanks.
But have 3 updates waiting in Apps but it is taking ages to update them and cannot get onto Apps by clicking Apps on the desktop.screen. -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
I had worked on the Illustrator CC 2014 with 19 slices of PDF presentation file for my assignment even in 15 minutes ago, and before closing it previous time, I have saved the file, and restarted my laptop, tried to open the PDF file again, but the message of "Could not open the file" was appeared each time I have tried to open it. I wonder what is wrong with it. And I do really have to working on it right now. Here I am attaching the pictures and please solve this problem. Thank you
Does it open in Acrobat?
Did it really complete saving? Or did it crash or did you abort the saving process?
In case you can open it in Acrobat, the PDF part of the file is still intact. Then you could create a niew file in Illustrator and place your file in it. Of course then most editing features will be lost, but at least you've got the content.
Use this script to place all pages at once:
Introducing: Open Multi-Page PDF win/mac -
Could not open the file in application server
Hi All,
I have a Zreport which will write files on application server. When I tried to download it is showing me "Could not open the file". And when checked again with /nal11 the files does not exist. When I ran the Zreport again the file exist in application server but unable to download. And when checked again the file doesnot exist. Why it is getting archived? Please help me.
Thanks,
VenkataHi Sagar,
Below is my file path : /dv2/tmp/instl/salesdata.txt
When I checked in the below path the file exists.
/dv2/tmp/archive/salesdata.txt
Solved the issue.
Thanks,
Venkata -
Am not able to use facebook on my Iphone 4, softwareversion:iOS7.1, also tried to access through safari and chrome that i have installed it gives an error message saying: "safari could not open the page because server stopped responding", i tried network reset, reset the whole device, rebooting , changing airplane mode rebooting nothing fix the issue, but i can access other sites and google , am using Vodafone as my carrier with 2g network, when at home able to access facebook.com through wifi in safari requesting assistance thank you
If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier. You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.
-
When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?
Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
Web Intelligence report scheduling: Error "Could not open the file"
Hello,
we are on BO 4.0 SP9 Patch 1.
Since the update to this patch level we have intermittent failure of scheduled reports in Web Intelligence.
Error message is: "Could not open the file *.wid"
There has been neither a change of the report nor a promotion.
Former schedules finished successful.
SAP note search or SCN search only showed notes with the issue that this error occurs after a promotion.
Does anyone has experiences with this error?Hi Sebastian,
If Hot Back is enabled I would suggest turning this feature off unless it’s a business requirement.
In addition as a workaround in the reoccurring jobs set the number of retries to something greater than 0.
This issue was fixed in BI4.0 SP08, I would suggest opening an incident with support.
Hope the above helps
~Valdrin -
My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding". I've run the AirPort utility and it shows that I'm connected to my Wi-Fi. The connection works with both my iMac and iPhone. I'm concerned that the problem is with hardware rather than software.
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
Adobe reader 10.1.2 could not open the file '/C/WINDOWS'
since adobe reader 10.1.2 urls don't work in pdf files to folders.
C:\WINDOWS\xy.xls
ok
C:\WINDOWS
not ok > adobe reader 10.1.2 could not open the file '/C/WINDOWS'
C:\WINDOWS
ok > with deactivated protected mode
no problems with 9.5.0 or 10.1.1 with activated protected mode
is that known? any other workaround?
thanksHi,
I also have Reader 10.1.2 installed on my machine and I also cannot open a link in the PDF, that will eventually call an exe file. I don't think that there would be different behaviour on your machine. So, I think, now this is the expected behaviour Reader 10.1.2 onwards. -
Could not open the file. An internal error occurred.
Hi,
Anyone can solve my problem? Urgent!
I can't open a png file. Others files was ok, just only one file can't open after save.
It show : Could not open the file. An internal error occurred.
Thanks!Seems like is corrupted during save or was caused by a Fireworks crash.
Try open with another version of Fireworks.
Linus
Fireworks Project Phoenix Product Manager
www.projectphoenix.io
https://www.facebook.com/groups/fwsingapore/
www.twitter.com/chunwui -
Could not open the Bluetooth ACPI device driver (tosrfec.sys)
Hello,
I installed Toshiba Bluetooth Stack on Windows 98 SE (Version 2.03 of BT Stack..).
If i wan't to run the Bluetooth Manager I always get the message "Could not open the Bluetooth ACPI device driver (tosrfec.sys).".
What can I do ?
Message was edited by: jollydwarfHello
Click to BT topics list and there you will find link to Toshiba Bluetooth Information Center. Check please FAQ section and there you can find many useful information about BT and BT troubleshooting. -
"Could Not Open the Communication Device" ???
I use a dial up connection. Everytime I try to connect to the internet, after it dials a message box pops up that says "Could Not Open the Communication Device". Has anyone else had this problem? And how do I fix it?
Please help me.I found this in Mac Help:
If you haven't entered your network settings, open Network preferences, choose your modem port (internal or external) from the Show pop-up menu, and enter the settings provided by your ISP, such as the access phone number, your user name, and your password.
You can also use the Network Setup Assistant to help you enter network settings. Click "Assist me" in the Network pane of System Preferences and follow the onscreen instructions.
Also verify that the number you are dialing is correct.
Try this too.
Some ISPs may require a PPP connection terminal script to connect to the Internet using a modem. If it is required, contact your ISP for the terminal script
To use a PPP connection terminal script follow these steps:
In the Finder, navigate to the Library folder on your startup disk.
If the Library folder does not contain a Terminal Scripts folder, you will need to create it. Choose File menu > New Folder, and name the new folder "Terminal Scripts."
Copy the terminal script file from your ISP to the Terminal Scripts folder.
To activate the terminal script, choose Apple menu > System Preferences.
Click Network and choose your modem port (internal or external) from the Show pop-up menu.
Select the PPP tab and click the PPP Options button.
Choose your connection script from the Terminal Script pop-up.
Click OK and then click Apply Now.
If the Terminal Script pop-up menu is dimmed, then the script is not being recognized. Check that the script is valid, and it is installed in the correct location.
-Internet Wiz
Maybe you are looking for
-
Possible to change the datasource from a business-view to a Sql Command ?
Hello, When a business view contains a lot of elements it takes a while just to open the report. We'd like to keep the BV as the dictionnary, but, once the report design completed, we'd like to disconnect the business view and replace it by the Sql c
-
Hi , I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again". I tried running this command
-
How do I get ical on the iphone to upload to mac calendar
Calendar information on my Mac syncs to the iphone, but info on the iphone does not upload to the Mac calendar when syncing. I have checked all the settings and am not figuring it out...
-
Aperture library file size ?
Hello, I have all my pictures on a specific drive. I don't want aperture to import the files into this aperture library, i only want the files to be referenced. So when i import the pictures from the drive, i select "Store in Current Location". And i
-
Doubt in String handling...
Hi Here i have a code snippet. public class StringComp public static void main(String[] args) String a = "abc"; String b = "def"; String c = "abcdef"; String d = "xyz"; String e = "xyz";