K1 is read only

I am having crashing issies and have had problems with updates... any changes I make now are gone after a reboot. It tries downloaing the same email every reboot, all apps I remove show back up...
I broke down and decided to do a reset.  The reset has no impact, it boots up the way it was efore the reset... I dont know what to do from here...

Apps not coming back it not a good description... 
it isn't as if they reinstall, it is if it never left. and I am not talking about pre-installed apps.
If I even put a file onto the filesyste, it is gone after a reboot.
The system has not updated yet (still at 13) I manually told it to check for updates. after downlaoding it didnt do anything (but that seems normal) later it reboted itself and got stuck with the chick saying "nvidia" for an hour.
I am hoping it will update itself and the problem will disapear.

Similar Messages

  • Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

    I don't know what's going on with my iomega external hard drive.  Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
    Ten days ago, I had trouble backing up my iMac using Time Machine.  After turning it off and restarting my external hard drive, it backed up successfully.
    However, today I am trying to back up my files, and TM tells me it can't find the external hard drive.  Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format.  It does turn on, and I could restore my computer to an earlier back up.
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
    Have tried verifying and repairing using Disk Utility, to no avail. 
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.  I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
    Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

    fzgy wrote:
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
    That will erase it.  See Time Machine - Frequently Asked Question #5.
    It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
    I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast).  Use it for secondary backups, per FAQ #27.   If it has failed, get a second new one for secondary backups. 

  • Fields for creation of BP in cProjects front-end are read-only

    Hi everyone,
    I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
    I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
    I'm using CPRXRPM 450_700 patch 0006
    The field-control is standard-SAP (0SAP).
    My user-account has all cProject-roles + SAP-ALL
    I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
    - Is there a documentation which field belongs to which Object Category in Field Control?
    - Or can somebody tell me a procedure to find it out on my own?
    Thanks in advance

    Hi,
    generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
    If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
    Collaboration Projects -> Resource Management -> Organizational Management.
    It is very HR related topic, you may contact a HR consultant to know more details about it.
    Kind regard,
    Zhenbo

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • Read Only access for a Maintenance view

    Hi All,
    I have a requirement like this.
    There is a Z Maintenance View (namely ZVHR_GRD_TARGET), for this i have to maintain the status as Read Only, and have to create a transaction code for this view with only SE16 access.
    I am doing like this.
    In the Z view, in the tab "Maint. Status", i have selected the radio button "Read Only" and saved it.
    I have created a transaction code for this view with SE16 access with the inputs
    Transaction                                                           SE16
    Selected the check box "Skip Intial Screen"
    Selected the check box for GUI status
    Name of the Screenfield                                          DATABROWSE-TABLENAME
    value                                                                      ZVHR_GRD_TARGET (i.e, view name)
    But the transaction code is not executing.
    So can any help me out in the requirement
    Regards
    Srinivas Kodukula

    Anchorage,
    Please refer to the following link:
    Read Only Schema in Oracle APPS 11i
    http://oracle.anilpassi.com/read-only-schema-in-oracle-apps-11i.html
    You may also search this forum as the same topic was discussed here many times before.

  • Can no longer select text in email template or read only field with mouse using IE or Firefox?

    Hi Guys,
    I can no longer select text in email template or read only field using my mouse in IE or Firefox anymore. We are using CRM 2011 rollup 18 applied with IE 11 and the latest version of Firefox. We only applied roll up 18 in Feb when this issue began.
    Thanks
    Dave
    David Kelly

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode."
    If those features work correctly, this points to one of your extensions or custom settings as the problem.
    To also disable plugins, you can use this page:
    orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
    Any change?

  • Read Only Display of Radio group and Text area with counter not working

    Hello,
    I am using Apex 3.2, with 10g for the database
    I have this form, with fields that will set to read only when status = 'closed'
    All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
    1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
    2nd field is Status which is a radio group that will not display as read only when status = 'closed'
    I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
    Any help on this is greatly appreciated.
    Mary

    Dung,
    That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
    Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
    Scott

  • Fields appear as "Read Only" in an Int.Form called from a WD

    Hi Experts!
    I am having a doubt in an Adobe Int.Form, that is called from a WD application.
    The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
    Here, I describe the steps that I follow.
    I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
    In that object, I set the properties:
    "Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
    "PDF Source": a context variable type XSTRING.
    "Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
    "Enabled": True.
    "Read Only": False.
    In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
    And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
    Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
    But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
    Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
    So here is my doubt.
    Am I doing anything wrong? Or am I doing any mistake?
    Thank you very much in advance!

    Finally I think I have found the problem.
    In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
    method WDDOMODIFYVIEW .
      DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
                 LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
      LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
      IF LV_INTERACTIVE_FORM IS NOT INITIAL.
          LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
          WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
        ENDIF.
    endmethod.
    Regards,
    Carles

  • Read only user creation for Oracle EM Console 11.1.1.5

    Dear All.
    I have created Read only user for Oracle EM Console.
    I have followed below link to do the same
    http://moshe-soa.blogspot.com/2011/09/blog-post.html.
    I have noticed with read only user is that TEST button in EM Console is active means user with read only user can create a trans, in Prod scenario it is a risk.
    Raised a CR with Oracle and found that it is a bug
    Bug 14082464 - CANNOT DISABLE TEST/TEST WEB SERVICE BUTTON IN SOA EM COSOLE is there in Metalink.
    So my question is there any way by which i can disable the TEST button in EM Conasole.
    I think there are some WLST script or servlet java class available to resolve this issue.
    Can any one confirm this and please suggest if any one aware of any alternative method.
    Thanks,

    Hi, have you got any solution to this problem? I am having exact the same issue in 11.1.1.6.

  • Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

    Hello,
    This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
    While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
    All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
    I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
    But these are not working for compnay code & sales area data.
    please let me know if anyone has faced this type of problem / found any solution on this.
    Best Regards,
    Shubhada

    SAP IMG  -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
    This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
    Suggested Values:
    Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
    Source Object: BP | Target Object: VENDOR | Active Indicator : X
    Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
    Source Object: VENDOR | Target Object: BP | Active Indicator : X
    Have you set all of the above settings??
    BHARATH

  • Are 'read only' items causing my automatic row processing to fail?

    I have a form that uses automatic row processing to update my table.
    I recently had to add a check to lock down the fields using the read only condition where a record has been 'approved'. So, I turned off all of the fields and hid the update button.
    Now they want me to check to see if the user is a manager, and if so, allow them to see the update button, and make a single field on the form modifiable.
    I have the user identified as a manager, and can make the field accept the change (a yes/no combo box). Yet when they click the update button, the form just sits there. A branch is supposed to fire on hitting that button, taking them back to the previous report, but it doesn't happen. The source of the combo box in question uses a column on the table, and works fine when the form has all of the fields showing for modification.
    I had some validations that I finally set to never fire, thinking that they were failing and just not giving the error messages. I know a bad sql or pl/sql atatement in a validation will cause the form to just keep sitting there doing nothing, and thought it might help.
    Several of the various fields are combo boxes, several are text boxes.
    I'm stumped.
    Shall I keep the regular update button hidden whether it is a manager or not (because it has been 'approved'), and enable a new button that fires off a process to update the one field that the manager may want to change? Does making a field 'read only' always have a detrimental effect on the auto processes I've been counting on? Is that if fact what is happening now?
    Thanks in advance for any advice or comments on this.
    Clayton

    Hi, Scott.
    My version is 3.0.0.00.20
    I have received info to set up the application, though I have not activated it as yet. I'm reluctant to try to load up the various tables to make it work. It could be done.
    My workaround is to that the user (a manager) fires off to another form to show an individual record, and ask if he/she really wants to make this change. On submit, they will be taken back to the original locked down form, and I will update the single field in that process of returning them. This will actually be a plus, in that I expect to show them all of the 'duplicate' entries for that item, and show them that by 'activating' this particular item, they will 'deactivate' the one duplicate that is currently active. Or, if they are deactivating the sole item that is active, that there will in fact be no active items in the system. Convoluted as heck, but they swear this is how they've been doing business with their briefcases and file cabinets of Excel files. I'm surprise they even float at this point (these are ships we're talking about).
    This all may be due to the form originally having a next/previous/count process once arrived at my clicking on the edit button of the report of items. All of that has been hidden away, and though the fields exist of the form, they are not used. They only see the current item that they clicked on from the report.
    I read up a little on session state, as well as posts with the debug error I was getting. I'm still not on board with the whole issue of 'state'. Items stay as they are until they're changed, no? I suppose that sounds simplistic.
    One of the things that caught my eye was several combo box lists that on read only mode, showed [] square brackets. Which, in some cases is okay.
    What I'll try to do is set up a public application - for future use if nothing else. I'm going to be working on this for awhile. I have more than a bit of work to do to cleanse the data as well as get rid of the single sign on requirement (I'll assume that I should have to do this) in order to share the app.
    I know you're expecting me to have this up and running for you to look at, but I'm under the gun. And they actually like my workaround.
    I'll keep everybody informed, one way or another.
    Clayton

  • Read only List-Field

    HI Folks
    It seems to me that there should be an easy answer to the following
    problem, so much so that I feel foolish for submitting it. However, since
    this is my first posting, it is usually o.k. to be an dimwitted idiot.
    Is there any way to have a list field (i.e. scroll list or drop list) that
    doesn't display the icon at the right side of the box (the drop arrow or
    scroll icon).
    We wish to display an item from the list in a read-only fashion, thus is
    not any need to display the list, just the corresponding item from the
    list. (i.e 'sex' it comes from the database as a 1 (Male) or 2 (Female),
    and rather than display the 1 or 2, we would like to display the 'Male' or
    'Female'. )
    Since we are displaying the records in an array and the array field is
    mapped to an object that corresponds to the database table, extra fields
    for translation, including virtual attributes, in that object fowl up the
    writing to that database table. And, of course, the Drop list adds some
    vertical height to the array field, screwing up the esthetic beauty of the
    screen.
    Thanks for reading this.
    -later
    -labeaux
    [email protected]

    Try some thing like below,
    your data value that needs to be update should be in this format "ID of the lookup";#"Title of the Lookup" 
    For example,
    listItem["Product_x0020_Number"]
    = "1;#iPhone";
    listItem["Product_x0020_Number"]
    = "2;#Mobile";
    Hope this helped you....

  • Read Only Columns

    Hi,
    We have designed a update METADATE type custom integrator to download, update and re-upload data to Oracle Apps. As a part of the integrator we are displaying few extra columns for the end users viewing purpose. The client want us to make such view only columns as 'READ ONLY' and prevent any changes to them. They want such columns to either be greyed out or protected in order to prevent any changes. Is it possible to achieve this using WebADI? We tried updating the READ_ONLY_FLAG column in the table bne_interface_cols_b but it doesn't work as expected. This set-up allows the end user to update/make changes to the column in the excel sheet and throws an error only when the sheet is uploaded, not before that.
    Any suggestions/help is appreciated. We are on R11i.
    Thanks,
    Nitin jain

    As suggested, an update statement like below will address the issue in R11i:
    update bne_layout_cols
    set style = 'mso-protection:locked;'
    where application_id = <>
    and interface_code = <>
    and sequence_num in <>;

  • Read-only radio group losing value on validation error

    It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
    For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
    Is this a bug or am I simply missing something?
    Apex 3.1.2
    Rgds/Mark M.

    It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
    1 Display=Yes, Return=Y
    2 Display=No, Return=N
    The settings in the LOV section on the item iteself:
    Named LOV: LOV_YN
    Display Extra values: No Dynamic translation: Not translated
    Number of columns: 2 Display null: No
    Null display value is blank as is null return value
    Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
    Rgds/Mark M.

  • Read only filesystem problem

    Hi,
    I have a strange problem. After some time of running archlinux the root filesystem suddenly becomes read-only. It happened 3 times yet. I'm using LVM and the root volume is /dev/mapper/VG0-archlinux2 and filesystem type is reiserfs.
    If i tried to remount it read-write using command
    mount -o remount,rw /
    i got this:
    sudo: unable to open /var/db/sudo/uiii/3: Read-only file system
    mount: /dev/mapper/VG0-archlinux2: can't read superblock
    Only reboot helps.
    my machine is (uname -a):
    Linux uiii-arch 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
    /etc/mtab (when problem occured):
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    dev /dev devtmpfs rw,nosuid,relatime,size=1990100k,nr_inodes=497525,mode=755 0 0
    run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/mapper/VG0-archlinux2 / reiserfs ro,relatime 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sda1 /boot ext2 rw,relatime 0 0
    /dev/mapper/VG0-uloziste /mnt/uloziste ext4 rw,relatime,data=ordered 0 0
    binfmt /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0
    gvfs-fuse-daemon /home/uiii/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
    dmesg output is this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012
    [ 0.000000] Command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790X-UD4/GA-MA790X-UD4, BIOS F3 06/03/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
    [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
    [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000130000000 aka 4864M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xcfedffff]
    [ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcfedffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0xcfedffff @ [mem 0x1f9fd000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
    [ 0.000000] [mem 0x100000000-0x12fffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfede000-0xcfedffff]
    [ 0.000000] RAMDISK: [mem 0x7fc62000-0x7fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f7010 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 00000000cfee3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 00000000cfee30c0 05980 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000cfee0000 00040
    [ 0.000000] ACPI: SSDT 00000000cfee8b00 008F5 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 00000000cfee9400 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 00000000cfee9440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: TAMG 00000000cfee9480 0030A (v01 GBT GBT B0 5455312E BG?? 53450101)
    [ 0.000000] ACPI: APIC 00000000cfee8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
    [ 0.000000] NODE_DATA [mem 0x12fffc000-0x12fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x12fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedffff]
    [ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
    [ 0.000000] On node 0 totalpages: 1048175
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831264 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3072 pages used for memmap
    [ 0.000000] Normal zone: 193536 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
    [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
    [ 0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83392 r8192 d23104 u524288
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028713
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/mapper/VG0-archlinux2 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 3980204k/4980736k available (4645k kernel code, 788036k absent, 212496k reserved, 4207k data, 760k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.003333] Fast TSC calibration using PIT
    [ 0.006666] Detected 2813.035 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5628.48 BogoMIPS (lpj=9376783)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000031] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000260] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001554] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.002140] Mount-cache hash table entries: 256
    [ 0.002315] Initializing cgroup subsys cpuacct
    [ 0.002317] Initializing cgroup subsys memory
    [ 0.002326] Initializing cgroup subsys devices
    [ 0.002327] Initializing cgroup subsys freezer
    [ 0.002328] Initializing cgroup subsys net_cls
    [ 0.002330] Initializing cgroup subsys blkio
    [ 0.002349] tseg: 00cff00000
    [ 0.002351] CPU: Physical Processor ID: 0
    [ 0.002352] CPU: Processor Core ID: 0
    [ 0.002353] mce: CPU supports 6 MCE banks
    [ 0.002358] LVT offset 0 assigned for vector 0xf9
    [ 0.002362] using AMD E400 aware idle routine
    [ 0.002998] ACPI: Core revision 20120320
    [ 0.019730] ftrace: allocating 17970 entries in 71 pages
    [ 0.027072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060076] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
    [ 0.165799] Performance Events: AMD PMU driver.
    [ 0.165802] ... version: 0
    [ 0.165803] ... bit width: 48
    [ 0.165803] ... generic registers: 4
    [ 0.165804] ... value mask: 0000ffffffffffff
    [ 0.165805] ... max period: 00007fffffffffff
    [ 0.165806] ... fixed-purpose events: 0
    [ 0.165807] ... event mask: 000000000000000f
    [ 0.185858] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.199154] Booting Node 0, Processors #1 #2
    [ 0.235675] Brought up 3 CPUs
    [ 0.235679] Total of 3 processors activated (16884.46 BogoMIPS).
    [ 0.239344] devtmpfs: initialized
    [ 0.240745] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.241490] NET: Registered protocol family 16
    [ 0.241574] node 0 link 0: io port [c000, ffff]
    [ 0.241576] TOM: 00000000d0000000 aka 3328M
    [ 0.241578] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
    [ 0.241580] node 0 link 0: mmio [a0000, bffff]
    [ 0.241582] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.241584] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.241586] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
    [ 0.241588] TOM2: 0000000130000000 aka 4864M
    [ 0.241589] bus: [00, 03] on node 0 link 0
    [ 0.241590] bus: 00 [io 0x0000-0xffff]
    [ 0.241591] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.241592] bus: 00 [mem 0xd0000000-0xdfffffff]
    [ 0.241593] bus: 00 [mem 0xe0400000-0xffffffff]
    [ 0.241594] bus: 00 [mem 0xe0100000-0xe03fffff]
    [ 0.241595] bus: 00 [mem 0x130000000-0xfcffffffff]
    [ 0.241649] ACPI: bus type pci registered
    [ 0.241696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.241698] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252350] PCI: Using configuration type 1 for base access
    [ 0.252819] bio: create slab <bio-0> at 0
    [ 0.252870] ACPI: Added _OSI(Module Device)
    [ 0.252871] ACPI: Added _OSI(Processor Device)
    [ 0.252872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252873] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253366] ACPI: EC: Look up EC in DSDT
    [ 0.258796] ACPI: Interpreter enabled
    [ 0.258802] ACPI: (supports S0 S3 S4 S5)
    [ 0.258819] ACPI: Using IOAPIC for interrupt routing
    [ 0.261632] ACPI: No dock devices found.
    [ 0.261636] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.261677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.261731] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.261733] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.261735] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.261737] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.261738] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
    [ 0.261768] PCI host bridge to bus 0000:00
    [ 0.261770] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.261772] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.261773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.261775] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.261777] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
    [ 0.261786] pci 0000:00:00.0: [1002:5958] type 00 class 0x060000
    [ 0.261797] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.261830] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.261858] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.261878] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
    [ 0.261906] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.261931] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
    [ 0.261949] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
    [ 0.261958] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.261967] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.261976] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.261985] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.261994] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.262013] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.262058] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262070] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.262132] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262145] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.262212] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262230] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
    [ 0.262309] pci 0000:00:12.2: supports D1 D2
    [ 0.262311] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262334] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.262346] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.262408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
    [ 0.262421] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.262493] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.262511] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.262590] pci 0000:00:13.2: supports D1 D2
    [ 0.262591] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.262616] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.262711] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
    [ 0.262726] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.262735] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.262744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.262753] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.262762] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
    [ 0.262817] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.262837] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.262901] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.262915] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.262987] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.263028] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.263041] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
    [ 0.263105] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.263119] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.263130] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.263141] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.263155] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.263201] pci 0000:01:00.0: [10de:05e2] type 00 class 0x030000
    [ 0.263210] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.263219] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.263229] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.263235] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.263242] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
    [ 0.269149] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.269155] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.269157] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.269161] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.269200] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.269213] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
    [ 0.269232] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.269245] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
    [ 0.269253] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.269300] pci 0000:02:00.0: supports D1 D2
    [ 0.269301] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.275814] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.275820] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.275822] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.275825] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.275865] pci 0000:03:07.0: [168c:001a] type 00 class 0x020000
    [ 0.275887] pci 0000:03:07.0: reg 10: [mem 0xfdee0000-0xfdeeffff]
    [ 0.276014] pci 0000:03:0e.0: [104c:8024] type 00 class 0x0c0010
    [ 0.276035] pci 0000:03:0e.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.276047] pci 0000:03:0e.0: reg 14: [mem 0xfdef8000-0xfdefbfff]
    [ 0.276136] pci 0000:03:0e.0: supports D1 D2
    [ 0.276138] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
    [ 0.276174] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.276177] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.276181] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.276185] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.276186] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.276188] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.276190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.276191] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.276193] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    [ 0.276205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.276360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.276399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.276426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.276447] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.276449] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.276450] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.282962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.282993] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283077] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283104] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283131] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283158] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.283250] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.283252] vgaarb: loaded
    [ 0.283253] vgaarb: bridge control possible 0000:01:00.0
    [ 0.283281] PCI: Using ACPI for IRQ routing
    [ 0.291632] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291638] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.291701] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.291703] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
    [ 0.291778] NetLabel: Initializing
    [ 0.291779] NetLabel: domain hash size = 128
    [ 0.291780] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291789] NetLabel: unlabeled traffic allowed by default
    [ 0.291804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.291807] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.293841] Switching to clocksource hpet
    [ 0.298189] pnp: PnP ACPI init
    [ 0.298200] ACPI: bus type pnp registered
    [ 0.298257] pnp 00:00: [bus 00-ff]
    [ 0.298260] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.298262] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.298264] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.298265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.298267] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.298268] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    [ 0.298295] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.298303] pnp 00:01: [io 0x0010-0x001f]
    [ 0.298304] pnp 00:01: [io 0x0022-0x003f]
    [ 0.298306] pnp 00:01: [io 0x0044-0x005f]
    [ 0.298307] pnp 00:01: [io 0x0062-0x0063]
    [ 0.298308] pnp 00:01: [io 0x0065-0x006f]
    [ 0.298310] pnp 00:01: [io 0x0074-0x007f]
    [ 0.298311] pnp 00:01: [io 0x0091-0x0093]
    [ 0.298312] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.298313] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.298315] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.298316] pnp 00:01: [io 0x0220-0x0225]
    [ 0.298317] pnp 00:01: [io 0x0290-0x0294]
    [ 0.298353] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.298355] system 00:01: [io 0x0220-0x0225] has been reserved
    [ 0.298356] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.298359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298785] pnp 00:02: [io 0x4100-0x411f]
    [ 0.298789] pnp 00:02: [io 0x0228-0x022f]
    [ 0.298791] pnp 00:02: [io 0x040b]
    [ 0.298792] pnp 00:02: [io 0x04d6]
    [ 0.298793] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.298794] pnp 00:02: [io 0x0c14]
    [ 0.298796] pnp 00:02: [io 0x0c50-0x0c52]
    [ 0.298797] pnp 00:02: [io 0x0c6c-0x0c6d]
    [ 0.298798] pnp 00:02: [io 0x0c6f]
    [ 0.298799] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.298801] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.298802] pnp 00:02: [io 0x0cd4-0x0cdf]
    [ 0.298803] pnp 00:02: [io 0x4000-0x40fe]
    [ 0.298804] pnp 00:02: [io 0x4210-0x4217]
    [ 0.298806] pnp 00:02: [io 0x0b00-0x0b0f]
    [ 0.298807] pnp 00:02: [io 0x0b10-0x0b1f]
    [ 0.298808] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.298810] pnp 00:02: [mem 0x00000000-0x00000fff window]
    [ 0.298812] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
    [ 0.298818] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.298844] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
    [ 0.298848] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.298885] system 00:02: [io 0x4100-0x411f] has been reserved
    [ 0.298887] system 00:02: [io 0x0228-0x022f] has been reserved
    [ 0.298889] system 00:02: [io 0x040b] has been reserved
    [ 0.298891] system 00:02: [io 0x04d6] has been reserved
    [ 0.298892] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.298894] system 00:02: [io 0x0c14] has been reserved
    [ 0.298896] system 00:02: [io 0x0c50-0x0c52] has been reserved
    [ 0.298897] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.298899] system 00:02: [io 0x0c6f] has been reserved
    [ 0.298900] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.298902] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.298904] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.298905] system 00:02: [io 0x4000-0x40fe] has been reserved
    [ 0.298907] system 00:02: [io 0x4210-0x4217] has been reserved
    [ 0.298908] system 00:02: [io 0x0b00-0x0b0f] has been reserved
    [ 0.298910] system 00:02: [io 0x0b10-0x0b1f] has been reserved
    [ 0.298912] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.298914] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.298917] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.298986] pnp 00:03: [dma 4]
    [ 0.298988] pnp 00:03: [io 0x0000-0x000f]
    [ 0.298989] pnp 00:03: [io 0x0080-0x0090]
    [ 0.298991] pnp 00:03: [io 0x0094-0x009f]
    [ 0.298992] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.299014] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.299038] pnp 00:04: [irq 0 disabled]
    [ 0.299049] pnp 00:04: [irq 8]
    [ 0.299051] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.299070] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.299088] pnp 00:05: [io 0x0070-0x0073]
    [ 0.299108] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.299114] pnp 00:06: [io 0x0061]
    [ 0.299134] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.299140] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.299147] pnp 00:07: [irq 13]
    [ 0.299167] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.299271] pnp 00:08: [io 0x03f0-0x03f5]
    [ 0.299272] pnp 00:08: [io 0x03f7]
    [ 0.299279] pnp 00:08: [irq 6]
    [ 0.299281] pnp 00:08: [dma 2]
    [ 0.299312] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.299438] pnp 00:09: [io 0x03f8-0x03ff]
    [ 0.299445] pnp 00:09: [irq 4]
    [ 0.299485] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.299507] pnp 00:0a: [io 0x0060]
    [ 0.299509] pnp 00:0a: [io 0x0064]
    [ 0.299516] pnp 00:0a: [irq 1]
    [ 0.299543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.299562] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.299596] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.299598] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.299674] pnp 00:0c: [mem 0x000cda00-0x000cffff]
    [ 0.299675] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.299677] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.299678] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.299680] pnp 00:0c: [mem 0xcfee0000-0xcfefffff]
    [ 0.299681] pnp 00:0c: [mem 0xffff0000-0xffffffff]
    [ 0.299682] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.299684] pnp 00:0c: [mem 0x00100000-0xcfedffff]
    [ 0.299685] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.299687] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.299688] pnp 00:0c: [mem 0xfff80000-0xfffeffff]
    [ 0.299692] pnp 00:0c: disabling [mem 0x000cda00-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299694] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299696] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299698] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299701] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299703] pnp 00:0c: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.299745] system 00:0c: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.299747] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.299749] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.299750] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.299752] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.299755] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.299768] pnp: PnP ACPI: found 13 devices
    [ 0.299769] ACPI: ACPI bus type pnp unregistered
    [ 0.306130] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
    [ 0.306133] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306135] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.306138] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306140] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306144] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
    [ 0.306145] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306147] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.306149] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.306152] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306155] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306157] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.306162] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.306165] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.306193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.306195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306197] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306198] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306200] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.306202] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.306203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306205] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    [ 0.306207] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.306209] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.306210] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.306212] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.306214] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
    [ 0.306215] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.306217] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.306219] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.306220] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.306222] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
    [ 0.306249] NET: Registered protocol family 2
    [ 0.306336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.307016] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.309549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.309858] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.309859] TCP: reno registered
    [ 0.309868] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309895] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.309974] NET: Registered protocol family 1
    [ 0.710572] pci 0000:01:00.0: Boot video device
    [ 0.710585] PCI: CLS 4 bytes, default 64
    [ 0.710637] Unpacking initramfs...
    [ 0.774193] Freeing initrd memory: 3700k freed
    [ 0.776235] PCI-DMA: Disabling AGP.
    [ 0.776306] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.776307] PCI-DMA: using GART IOMMU.
    [ 0.776309] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.779581] LVT offset 1 assigned for vector 0x400
    [ 0.779589] IBS: LVT offset 1 assigned
    [ 0.779613] perf: AMD IBS detected (0x0000001f)
    [ 0.779743] audit: initializing netlink socket (disabled)
    [ 0.779753] type=2000 audit(1348861535.663:1): initialized
    [ 0.789269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.790783] VFS: Disk quotas dquot_6.5.2
    [ 0.790820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.790894] msgmni has been set to 7909
    [ 0.791048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.791075] io scheduler noop registered
    [ 0.791076] io scheduler deadline registered
    [ 0.791112] io scheduler cfq registered (default)
    [ 0.791228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.791319] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.791449] GHES: HEST is not enabled!
    [ 0.791503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.812101] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.832955] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.833141] Linux agpgart interface v0.103
    [ 0.833180] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.833181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.833304] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.833378] mousedev: PS/2 mouse device common for all mice
    [ 0.833425] rtc_cmos 00:05: RTC can wake from S4
    [ 0.833539] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.833571] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.833577] cpuidle: using governor ladder
    [ 0.833578] cpuidle: using governor menu
    [ 0.833689] drop_monitor: Initializing network drop monitor service
    [ 0.833749] TCP: cubic registered
    [ 0.833835] NET: Registered protocol family 10
    [ 0.833965] NET: Registered protocol family 17
    [ 0.833973] Key type dns_resolver registered
    [ 0.834070] PM: Hibernation image not present or could not be loaded.
    [ 0.834076] registered taskstats version 1
    [ 0.834539] rtc_cmos 00:05: setting system clock to 2012-09-28 19:45:35 UTC (1348861535)
    [ 0.835479] Freeing unused kernel memory: 760k freed
    [ 0.835631] Write protecting the kernel read-only data: 8192k
    [ 0.839453] Freeing unused kernel memory: 1488k freed
    [ 0.841313] Freeing unused kernel memory: 612k freed
    [ 0.848497] systemd-udevd[70]: starting version 189
    [ 0.851135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.861403] Floppy drive(s): fd0 is 1.44M
    [ 0.868797] ACPI: bus type usb registered
    [ 0.868817] usbcore: registered new interface driver usbfs
    [ 0.868825] usbcore: registered new interface driver hub
    [ 0.868995] usbcore: registered new device driver usb
    [ 0.869288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.869717] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.869754] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.869763] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.869785] QUIRK: Enable AMD PLL fix
    [ 0.869787] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.869799] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.869827] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
    [ 0.871224] SCSI subsystem initialized
    [ 0.872843] libata version 3.00 loaded.
    [ 0.874245] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.877166] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.877278] hub 1-0:1.0: USB hub found
    [ 0.877281] hub 1-0:1.0: 6 ports detected
    [ 0.878035] FDC 0 is a post-1991 82077
    [ 0.878198] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.878204] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.878211] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.878223] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
    [ 0.878238] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.878264] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
    [ 0.887161] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.887266] hub 2-0:1.0: USB hub found
    [ 0.887269] hub 2-0:1.0: 6 ports detected
    [ 0.887719] ahci 0000:00:11.0: version 3.0
    [ 0.887841] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.887844] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
    [ 0.888332] scsi0 : ahci
    [ 0.888396] scsi1 : ahci
    [ 0.888447] scsi2 : ahci
    [ 0.888494] scsi3 : ahci
    [ 0.888576] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 0.888578] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 0.888580] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 0.888583] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 0.888675] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.888681] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.888719] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
    [ 0.944618] hub 3-0:1.0: USB hub found
    [ 0.944624] hub 3-0:1.0: 3 ports detected
    [ 0.944916] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.944922] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.944936] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
    [ 1.001279] hub 4-0:1.0: USB hub found
    [ 1.001285] hub 4-0:1.0: 3 ports detected
    [ 1.001404] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.001409] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.001435] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
    [ 1.057932] hub 5-0:1.0: USB hub found
    [ 1.057938] hub 5-0:1.0: 3 ports detected
    [ 1.058071] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.058076] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.058089] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
    [ 1.114589] hub 6-0:1.0: USB hub found
    [ 1.114595] hub 6-0:1.0: 3 ports detected
    [ 1.114705] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.114710] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.114723] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
    [ 1.171271] hub 7-0:1.0: USB hub found
    [ 1.171277] hub 7-0:1.0: 2 ports detected
    [ 1.207184] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.207225] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.300449] usb 2-4: new high-speed USB device number 3 using ehci_hcd
    [ 1.373774] ata2: softreset failed (device not ready)
    [ 1.373843] ata2: applying PMP SRST workaround and retrying
    [ 1.373866] ata1: softreset failed (device not ready)
    [ 1.373934] ata1: applying PMP SRST workaround and retrying
    [ 1.425928] hub 2-4:1.0: USB hub found
    [ 1.426276] hub 2-4:1.0: 4 ports detected
    [ 1.540428] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.540459] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.541221] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
    [ 1.541224] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.542034] ata1.00: configured for UDMA/133
    [ 1.542185] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
    [ 1.552905] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100
    [ 1.565919] ata2.00: configured for UDMA/100
    [ 1.567862] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5
    [ 1.570090] scsi4 : pata_atiixp
    [ 1.570937] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.570968] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.570970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.570992] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.571032] scsi5 : pata_atiixp
    [ 1.571566] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
    [ 1.571568] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
    [ 1.574704] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.574707] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.574836] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.583928] sda: sda1 sda2 sda3 sda4
    [ 1.584257] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.677054] usb 5-3: new full-speed USB device number 2 using ohci_hcd
    [ 1.780379] Refined TSC clocksource calibration: 2812.808 MHz.
    [ 1.780391] Switching to clocksource tsc
    [ 1.850813] usbcore: registered new interface driver usbhid
    [ 1.850814] usbhid: USB HID core driver
    [ 1.851297] input: HID 1d57:0005 as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input1
    [ 1.851380] hid-generic 0003:1D57:0005.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1d57:0005] on usb-0000:00:13.0-3/input0
    [ 1.914434] usb 2-4.4: new high-speed USB device number 4 using ehci_hcd
    [ 1.925431] device-mapper: uevent: version 1.0.3
    [ 1.925535] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 2.294145] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
    [ 2.294160] REISERFS (device dm-3): using ordered data mode
    [ 2.294161] reiserfs: using flush barriers
    [ 2.294331] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 2.294793] REISERFS (device dm-3): checking transaction log (dm-3)
    [ 2.328438] REISERFS (device dm-3): Using r5 hash to sort names
    [ 3.521243] systemd-udevd[196]: starting version 192
    [ 3.731543] vboxdrv: Found 3 processor cores.
    [ 3.731692] vboxdrv: fAsync=0 offMin=0x421 offMax=0x19b7
    [ 3.731735] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 3.731736] vboxdrv: Successfully loaded version 4.2.0_OSE (interface 0x001a0004).
    [ 4.078334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.078340] ACPI: Power Button [PWRB]
    [ 4.078389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.078391] ACPI: Power Button [PWRF]
    [ 4.118249] wmi: Mapper loaded
    [ 4.264495] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.264551] sp5100_tco: mmio address 0xfec000f0 already in use
    [ 4.266129] EDAC MC: Ver: 2.1.0
    [ 4.308369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
    [ 4.326814] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 4.326881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 4.326938] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 4.326984] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 4.327034] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 4.327093] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 4.327137] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 4.327181] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 4.331081] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
    [ 4.331239] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
    [ 4.331244] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 4.370081] firewire_ohci 0000:03:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.370182] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.370266] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.370532] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000656000, 00:24:1d:14:eb:1c, XID 1c4000c0 IRQ 42
    [ 4.370534] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.460371] MCE: In-kernel MCE decoding enabled.
    [ 4.461269] AMD64 EDAC driver v3.4.0
    [ 4.461326] EDAC amd64: DRAM ECC disabled.
    [ 4.461332] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 4.681980] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.870047] firewire_core 0000:03:0e.0: created device fw0: GUID 0019f1ec0000241d, S400
    [ 4.906613] ath5k 0000:03:07.0: registered as 'phy0'
    [ 5.157960] kvm: Nested Virtualization enabled
    [ 5.157964] kvm: Nested Paging enabled
    [ 5.212068] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor (3 cpu cores) (version 2.20.00)
    [ 5.212100] powernow-k8: 0 : pstate 0 (2800 MHz)
    [ 5.212101] powernow-k8: 1 : pstate 1 (2100 MHz)
    [ 5.212102] powernow-k8: 2 : pstate 2 (1600 MHz)
    [ 5.212103] powernow-k8: 3 : pstate 3 (800 MHz)
    [ 5.445767] microcode: CPU0: patch_level=0x01000086
    [ 5.513053] ath: EEPROM regdomain: 0x809c
    [ 5.513060] ath: EEPROM indicates we should expect a country code
    [ 5.513064] ath: doing EEPROM country->regdmn map search
    [ 5.513067] ath: country maps to regdmn code: 0x52
    [ 5.513070] ath: Country alpha2 being used: CN
    [ 5.513073] ath: Regpair used: 0x52
    [ 5.720324] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.720419] microcode: CPU1: patch_level=0x01000086
    [ 5.721269] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.721373] microcode: CPU2: patch_level=0x01000086
    [ 5.722356] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 5.722563] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 5.801835] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 5.802304] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
    [ 6.296710] nvidia: module license 'NVIDIA' taints kernel.
    [ 6.296714] Disabling lock debugging due to kernel taint
    [ 6.309419] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 6.309823] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.51 Tue Sep 18 17:16:56 PDT 2012
    [ 6.321474] Linux media interface: v0.10
    [ 6.384863] Linux video capture interface: v2.00
    [ 6.452628] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
    [ 6.469190] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4.4/2-4.4:1.0/input/input13
    [ 6.469404] usbcore: registered new interface driver uvcvideo
    [ 6.469407] USB Video Class driver (1.1.1)
    [ 7.020908] usbcore: registered new interface driver snd-usb-audio
    [ 7.051400] set resolution quirk: cval->res = 384
    [ 8.232297] reiserfs: enabling write barrier flush mode
    [ 8.511269] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 8.515067] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 8.556782] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.739934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 11.452652] wlan0: authenticate with 00:1f:c6:3d:84:ba
    [ 11.461052] wlan0: send auth to 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.462516] wlan0: authenticated
    [ 11.469067] wlan0: associate with 00:1f:c6:3d:84:ba (try 1/3)
    [ 11.470817] wlan0: RX AssocResp from 00:1f:c6:3d:84:ba (capab=0x401 status=0 aid=3)
    [ 11.471130] wlan0: associated
    [ 11.471521] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 24.567793] NVRM: GPU at 0000:01:00: GPU-ac314c58-0b61-fb24-fa28-bac76d8e581b
    [ 27.419761] fuse init (API version 7.19)
    [ 31.119563] EXT4-fs (dm-2): re-mounted. Opts: commit=0
    [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    [ 2088.845667] ata1: SError: { HostInt Handshk }
    [ 2088.845674] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845687] ata1.00: cmd 61/08:10:97:ae:07/00:00:1a:00:00/40 tag 2 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845694] ata1.00: status: { DRDY }
    [ 2088.845699] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845711] ata1.00: cmd 61/08:18:b7:ae:07/00:00:1a:00:00/40 tag 3 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845716] ata1.00: status: { DRDY }
    [ 2088.845721] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845732] ata1.00: cmd 61/20:20:bf:ae:07/00:00:1a:00:00/40 tag 4 ncq 16384 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845737] ata1.00: status: { DRDY }
    [ 2088.845742] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845753] ata1.00: cmd 61/c8:28:df:ae:07/00:00:1a:00:00/40 tag 5 ncq 102400 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845758] ata1.00: status: { DRDY }
    [ 2088.845763] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845774] ata1.00: cmd 61/90:30:a7:af:07/00:00:1a:00:00/40 tag 6 ncq 73728 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845779] ata1.00: status: { DRDY }
    [ 2088.845783] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845795] ata1.00: cmd 61/b8:38:37:b0:07/00:00:1a:00:00/40 tag 7 ncq 94208 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845800] ata1.00: status: { DRDY }
    [ 2088.845804] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845815] ata1.00: cmd 61/a8:40:ef:b0:07/00:00:1a:00:00/40 tag 8 ncq 86016 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845820] ata1.00: status: { DRDY }
    [ 2088.845825] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845836] ata1.00: cmd 61/80:48:97:b1:07/00:00:1a:00:00/40 tag 9 ncq 65536 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845841] ata1.00: status: { DRDY }
    [ 2088.845845] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845857] ata1.00: cmd 61/b0:50:17:b2:07/00:00:1a:00:00/40 tag 10 ncq 90112 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845862] ata1.00: status: { DRDY }
    [ 2088.845867] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845878] ata1.00: cmd 61/d8:58:c7:b2:07/00:00:1a:00:00/40 tag 11 ncq 110592 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845883] ata1.00: status: { DRDY }
    [ 2088.845889] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845900] ata1.00: cmd 61/08:d8:8f:ae:07/00:00:1a:00:00/40 tag 27 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845905] ata1.00: status: { DRDY }
    [ 2088.845910] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845922] ata1.00: cmd 61/08:e0:9f:ae:07/00:00:1a:00:00/40 tag 28 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845927] ata1.00: status: { DRDY }
    [ 2088.845931] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845942] ata1.00: cmd 61/08:e8:a7:ae:07/00:00:1a:00:00/40 tag 29 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845947] ata1.00: status: { DRDY }
    [ 2088.845954] ata1.00: failed command: WRITE FPDMA QUEUED
    [ 2088.845965] ata1.00: cmd 61/08:f0:af:ae:07/00:00:1a:00:00/40 tag 30 ncq 4096 out
    res 40/00:5c:c7:b2:07/00:00:1a:00:00/40 Emask 0x50 (ATA bus error)
    [ 2088.845970] ata1.00: status: { DRDY }
    [ 2088.845978] ata1: hard resetting link
    [ 2089.329937] ata1: softreset failed (device not ready)
    [ 2089.329948] ata1: applying PMP SRST workaround and retrying
    [ 2089.496590] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2089.498245] ata1.00: configured for UDMA/133
    [ 2089.509941] sd 0:0:0:0: [sda]
    [ 2089.509950] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.509956] sd 0:0:0:0: [sda]
    [ 2089.509959] Sense Key : 0xb [current] [descriptor]
    [ 2089.509966] Descriptor sense data with sense descriptors (in hex):
    [ 2089.509969] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.509987] 1a 07 b2 c7
    [ 2089.509996] sd 0:0:0:0: [sda]
    [ 2089.509999] ASC=0x0 ASCQ=0x0
    [ 2089.510004] sd 0:0:0:0: [sda] CDB:
    [ 2089.510006] cdb[0]=0x2a: 2a 00 1a 07 ae 97 00 00 08 00
    [ 2089.510021] end_request: I/O error, dev sda, sector 436711063
    [ 2089.510032] Buffer I/O error on device dm-3, logical block 631
    [ 2089.510035] lost page write due to I/O error on dm-3
    [ 2089.510058] sd 0:0:0:0: [sda]
    [ 2089.510061] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510066] sd 0:0:0:0: [sda]
    [ 2089.510068] Sense Key : 0xb [current] [descriptor]
    [ 2089.510073] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510075] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510091] 1a 07 b2 c7
    [ 2089.510099] sd 0:0:0:0: [sda]
    [ 2089.510101] ASC=0x0 ASCQ=0x0
    [ 2089.510106] sd 0:0:0:0: [sda] CDB:
    [ 2089.510108] cdb[0]=0x2a: 2a 00 1a 07 ae b7 00 00 08 00
    [ 2089.510121] end_request: I/O error, dev sda, sector 436711095
    [ 2089.510126] Buffer I/O error on device dm-3, logical block 635
    [ 2089.510129] lost page write due to I/O error on dm-3
    [ 2089.510140] sd 0:0:0:0: [sda]
    [ 2089.510142] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510146] sd 0:0:0:0: [sda]
    [ 2089.510149] Sense Key : 0xb [current] [descriptor]
    [ 2089.510153] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510155] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510171] 1a 07 b2 c7
    [ 2089.510178] sd 0:0:0:0: [sda]
    [ 2089.510181] ASC=0x0 ASCQ=0x0
    [ 2089.510185] sd 0:0:0:0: [sda] CDB:
    [ 2089.510187] cdb[0]=0x2a: 2a 00 1a 07 ae bf 00 00 20 00
    [ 2089.510200] end_request: I/O error, dev sda, sector 436711103
    [ 2089.510205] Buffer I/O error on device dm-3, logical block 636
    [ 2089.510208] lost page write due to I/O error on dm-3
    [ 2089.510212] Buffer I/O error on device dm-3, logical block 637
    [ 2089.510215] lost page write due to I/O error on dm-3
    [ 2089.510220] Buffer I/O error on device dm-3, logical block 638
    [ 2089.510222] lost page write due to I/O error on dm-3
    [ 2089.510227] Buffer I/O error on device dm-3, logical block 639
    [ 2089.510230] lost page write due to I/O error on dm-3
    [ 2089.510245] sd 0:0:0:0: [sda]
    [ 2089.510248] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510252] sd 0:0:0:0: [sda]
    [ 2089.510254] Sense Key : 0xb [current] [descriptor]
    [ 2089.510258] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510261] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510276] 1a 07 b2 c7
    [ 2089.510284] sd 0:0:0:0: [sda]
    [ 2089.510286] ASC=0x0 ASCQ=0x0
    [ 2089.510290] sd 0:0:0:0: [sda] CDB:
    [ 2089.510293] cdb[0]=0x2a: 2a 00 1a 07 ae df 00 00 c8 00
    [ 2089.510305] end_request: I/O error, dev sda, sector 436711135
    [ 2089.510310] Buffer I/O error on device dm-3, logical block 640
    [ 2089.510313] lost page write due to I/O error on dm-3
    [ 2089.510317] Buffer I/O error on device dm-3, logical block 641
    [ 2089.510320] lost page write due to I/O error on dm-3
    [ 2089.510325] Buffer I/O error on device dm-3, logical block 642
    [ 2089.510327] lost page write due to I/O error on dm-3
    [ 2089.510332] Buffer I/O error on device dm-3, logical block 643
    [ 2089.510335] lost page write due to I/O error on dm-3
    [ 2089.510400] sd 0:0:0:0: [sda]
    [ 2089.510403] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510407] sd 0:0:0:0: [sda]
    [ 2089.510409] Sense Key : 0xb [current] [descriptor]
    [ 2089.510414] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510416] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510432] 1a 07 b2 c7
    [ 2089.510440] sd 0:0:0:0: [sda]
    [ 2089.510442] ASC=0x0 ASCQ=0x0
    [ 2089.510446] sd 0:0:0:0: [sda] CDB:
    [ 2089.510449] cdb[0]=0x2a: 2a 00 1a 07 af a7 00 00 90 00
    [ 2089.510461] end_request: I/O error, dev sda, sector 436711335
    [ 2089.510502] sd 0:0:0:0: [sda]
    [ 2089.510505] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510509] sd 0:0:0:0: [sda]
    [ 2089.510511] Sense Key : 0xb [current] [descriptor]
    [ 2089.510515] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510518] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510533] 1a 07 b2 c7
    [ 2089.510541] sd 0:0:0:0: [sda]
    [ 2089.510543] ASC=0x0 ASCQ=0x0
    [ 2089.510548] sd 0:0:0:0: [sda] CDB:
    [ 2089.510550] cdb[0]=0x2a: 2a 00 1a 07 b0 37 00 00 b8 00
    [ 2089.510563] end_request: I/O error, dev sda, sector 436711479
    [ 2089.510610] sd 0:0:0:0: [sda]
    [ 2089.510613] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510617] sd 0:0:0:0: [sda]
    [ 2089.510619] Sense Key : 0xb [current] [descriptor]
    [ 2089.510623] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510626] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510641] 1a 07 b2 c7
    [ 2089.510649] sd 0:0:0:0: [sda]
    [ 2089.510651] ASC=0x0 ASCQ=0x0
    [ 2089.510656] sd 0:0:0:0: [sda] CDB:
    [ 2089.510658] cdb[0]=0x2a: 2a 00 1a 07 b0 ef 00 00 a8 00
    [ 2089.510670] end_request: I/O error, dev sda, sector 436711663
    [ 2089.510713] sd 0:0:0:0: [sda]
    [ 2089.510716] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510720] sd 0:0:0:0: [sda]
    [ 2089.510722] Sense Key : 0xb [current] [descriptor]
    [ 2089.510727] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510729] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510744] 1a 07 b2 c7
    [ 2089.510752] sd 0:0:0:0: [sda]
    [ 2089.510754] ASC=0x0 ASCQ=0x0
    [ 2089.510759] sd 0:0:0:0: [sda] CDB:
    [ 2089.510761] cdb[0]=0x2a: 2a 00 1a 07 b1 97 00 00 80 00
    [ 2089.510774] end_request: I/O error, dev sda, sector 436711831
    [ 2089.510812] sd 0:0:0:0: [sda]
    [ 2089.510815] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510819] sd 0:0:0:0: [sda]
    [ 2089.510821] Sense Key : 0xb [current] [descriptor]
    [ 2089.510825] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510828] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510843] 1a 07 b2 c7
    [ 2089.510851] sd 0:0:0:0: [sda]
    [ 2089.510854] ASC=0x0 ASCQ=0x0
    [ 2089.510858] sd 0:0:0:0: [sda] CDB:
    [ 2089.510860] cdb[0]=0x2a: 2a 00 1a 07 b2 17 00 00 b0 00
    [ 2089.510873] end_request: I/O error, dev sda, sector 436711959
    [ 2089.510919] sd 0:0:0:0: [sda]
    [ 2089.510922] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.510926] sd 0:0:0:0: [sda]
    [ 2089.510928] Sense Key : 0xb [current] [descriptor]
    [ 2089.510933] Descriptor sense data with sense descriptors (in hex):
    [ 2089.510935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.510951] 1a 07 b2 c7
    [ 2089.510959] sd 0:0:0:0: [sda]
    [ 2089.510961] ASC=0x0 ASCQ=0x0
    [ 2089.510966] sd 0:0:0:0: [sda] CDB:
    [ 2089.510968] cdb[0]=0x2a: 2a 00 1a 07 b2 c7 00 00 d8 00
    [ 2089.510980] end_request: I/O error, dev sda, sector 436712135
    [ 2089.511030] sd 0:0:0:0: [sda]
    [ 2089.511033] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511037] sd 0:0:0:0: [sda]
    [ 2089.511039] Sense Key : 0xb [current] [descriptor]
    [ 2089.511043] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511046] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511061] 1a 07 b2 c7
    [ 2089.511069] sd 0:0:0:0: [sda]
    [ 2089.511071] ASC=0x0 ASCQ=0x0
    [ 2089.511076] sd 0:0:0:0: [sda] CDB:
    [ 2089.511078] cdb[0]=0x2a: 2a 00 1a 07 ae 8f 00 00 08 00
    [ 2089.511090] end_request: I/O error, dev sda, sector 436711055
    [ 2089.511111] sd 0:0:0:0: [sda]
    [ 2089.511114] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511118] sd 0:0:0:0: [sda]
    [ 2089.511120] Sense Key : 0xb [current] [descriptor]
    [ 2089.511125] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511128] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511144] 1a 07 b2 c7
    [ 2089.511151] sd 0:0:0:0: [sda]
    [ 2089.511154] ASC=0x0 ASCQ=0x0
    [ 2089.511158] sd 0:0:0:0: [sda] CDB:
    [ 2089.511160] cdb[0]=0x2a: 2a 00 1a 07 ae 9f 00 00 08 00
    [ 2089.511173] end_request: I/O error, dev sda, sector 436711071
    [ 2089.511188] sd 0:0:0:0: [sda]
    [ 2089.511191] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511195] sd 0:0:0:0: [sda]
    [ 2089.511197] Sense Key : 0xb [current] [descriptor]
    [ 2089.511201] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511204] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511219] 1a 07 b2 c7
    [ 2089.511227] sd 0:0:0:0: [sda]
    [ 2089.511230] ASC=0x0 ASCQ=0x0
    [ 2089.511234] sd 0:0:0:0: [sda] CDB:
    [ 2089.511236] cdb[0]=0x2a: 2a 00 1a 07 ae a7 00 00 08 00
    [ 2089.511249] end_request: I/O error, dev sda, sector 436711079
    [ 2089.511263] sd 0:0:0:0: [sda]
    [ 2089.511266] Result: hostbyte=0x00 driverbyte=0x08
    [ 2089.511270] sd 0:0:0:0: [sda]
    [ 2089.511272] Sense Key : 0xb [current] [descriptor]
    [ 2089.511277] Descriptor sense data with sense descriptors (in hex):
    [ 2089.511279] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 2089.511295] 1a 07 b2 c7
    [ 2089.511302] sd 0:0:0:0: [sda]
    [ 2089.511305] ASC=0x0 ASCQ=0x0
    [ 2089.511309] sd 0:0:0:0: [sda] CDB:
    [ 2089.511311] cdb[0]=0x2a: 2a 00 1a 07 ae af 00 00 08 00
    [ 2089.511324] end_request: I/O error, dev sda, sector 436711087
    [ 2089.511343] ata1: EH complete
    [ 2089.511517] REISERFS abort (device dm-3): Journal write error in flush_commit_list
    error.log (only part related to the current session):
    Sep 28 20:20:21 localhost kernel: [ 2088.845650] ata1.00: exception Emask 0x50 SAct 0x78000ffc SErr 0x400800 action 0x6 frozen
    Sep 28 20:20:21 localhost kernel: [ 2088.845660] ata1.00: irq_stat 0x08000000, interface fatal error
    Sep 28 20:20:21 localh

    uzsolt wrote:
    I've same problem with an asus laptop, with one hdd. On the device I've some partitions (home, root, backup, var) but this error appears with 'home' only. Sometimes the mount options turns into "read-only", but only on home-partition (ext4, but root, var and a download-directory is ext4 too but they works well).
    I found this: https://bbs.archlinux.org/viewtopic.php … 9#p1052099 - I hope this helps for me - and for you too
    Errors in logs:
    Dec 02 09:44:03 [kernel] [ 666.911555] ata1.00: exception Emask 0x50 SAct 0x4 SErr 0x400800 action 0x6 frozen
    Dec 02 09:44:03 [kernel] [ 666.911561] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:03 [kernel] [ 666.911564] ata1: SError: { HostInt Handshk }
    Dec 02 09:44:03 [kernel] [ 666.911568] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:03 [kernel] [ 666.911574] ata1.00: cmd 61/68:10:53:25:2a/00:00:04:00:00/40 tag 2 ncq 53248 out
    Dec 02 09:44:03 [kernel] [ 666.911574] res 40/00:10:53:25:2a/00:00:04:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:03 [kernel] [ 666.911577] ata1.00: status: { DRDY }
    Dec 02 09:44:03 [kernel] [ 666.911583] ata1: hard resetting link
    Dec 02 09:44:03 [kernel] [ 667.396660] ata1: softreset failed (device not ready)
    Dec 02 09:44:03 [kernel] [ 667.396668] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:03 [kernel] [ 667.563375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:03 [kernel] [ 667.614772] ata1.00: configured for UDMA/133
    Dec 02 09:44:03 [kernel] [ 667.614796] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614798] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:03 [kernel] [ 667.614801] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614802] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:03 [kernel] [ 667.614806] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:03 [kernel] [ 667.614808] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:03 [kernel] [ 667.614816] 04 2a 25 53
    Dec 02 09:44:03 [kernel] [ 667.614821] sd 0:0:0:0: [sda]
    Dec 02 09:44:03 [kernel] [ 667.614822] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:03 [kernel] [ 667.614825] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:03 [kernel] [ 667.614827] cdb[0]=0x2a: 2a 00 04 2a 25 53 00 00 68 00
    Dec 02 09:44:03 [kernel] [ 667.614834] end_request: I/O error, dev sda, sector 69870931
    Dec 02 09:44:03 [kernel] [ 667.614862] ata1: EH complete
    Dec 02 09:44:03 [kernel] [ 667.614949] Aborting journal on device sda3-8.
    Dec 02 09:44:03 [kernel] [ 667.614962] EXT4-fs error (device sda3) in ext4_reserve_inode_write:4550: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.692734] EXT4-fs error (device sda3) in ext4_dirty_inode:4669: Journal has aborted
    Dec 02 09:44:04 [kernel] [ 667.720681] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:04 [kernel] [ 667.720690] EXT4-fs (sda3): Remounting filesystem read-only
    Dec 02 09:44:04 [kernel] [ 667.721798] EXT4-fs error (device sda3): ext4_journal_start_sb:349: Detected aborted journal
    Dec 02 09:44:30 [kernel] [ 694.098612] ata1.00: exception Emask 0x50 SAct 0x40 SErr 0x800 action 0x6 frozen
    Dec 02 09:44:30 [kernel] [ 694.098622] ata1.00: irq_stat 0x08000000, interface fatal error
    Dec 02 09:44:30 [kernel] [ 694.098627] ata1: SError: { HostInt }
    Dec 02 09:44:30 [kernel] [ 694.098635] ata1.00: failed command: WRITE FPDMA QUEUED
    Dec 02 09:44:30 [kernel] [ 694.098647] ata1.00: cmd 61/08:30:53:a6:e5/00:00:05:00:00/40 tag 6 ncq 4096 out
    Dec 02 09:44:30 [kernel] [ 694.098647] res 40/00:30:53:a6:e5/00:00:05:00:00/40 Emask 0x50 (ATA bus error)
    Dec 02 09:44:30 [kernel] [ 694.098653] ata1.00: status: { DRDY }
    Dec 02 09:44:30 [kernel] [ 694.098663] ata1: hard resetting link
    Dec 02 09:44:30 [kernel] [ 694.583317] ata1: softreset failed (device not ready)
    Dec 02 09:44:30 [kernel] [ 694.583328] ata1: applying PMP SRST workaround and retrying
    Dec 02 09:44:31 [kernel] [ 694.749997] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Dec 02 09:44:31 [kernel] [ 694.804387] ata1.00: configured for UDMA/133
    Dec 02 09:44:31 [kernel] [ 694.804425] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804428] Result: hostbyte=0x00 driverbyte=0x08
    Dec 02 09:44:31 [kernel] [ 694.804434] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804437] Sense Key : 0xb [current] [descriptor]
    Dec 02 09:44:31 [kernel] [ 694.804443] Descriptor sense data with sense descriptors (in hex):
    Dec 02 09:44:31 [kernel] [ 694.804447] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Dec 02 09:44:31 [kernel] [ 694.804463] 05 e5 a6 53
    Dec 02 09:44:31 [kernel] [ 694.804472] sd 0:0:0:0: [sda]
    Dec 02 09:44:31 [kernel] [ 694.804475] ASC=0x0 ASCQ=0x0
    Dec 02 09:44:31 [kernel] [ 694.804480] sd 0:0:0:0: [sda] CDB:
    Dec 02 09:44:31 [kernel] [ 694.804482] cdb[0]=0x2a: 2a 00 05 e5 a6 53 00 00 08 00
    Dec 02 09:44:31 [kernel] [ 694.804497] end_request: I/O error, dev sda, sector 98936403
    Dec 02 09:44:31 [kernel] [ 694.804505] Buffer I/O error on device sda3, logical block 9437196
    Dec 02 09:44:31 [kernel] [ 694.804508] lost page write due to I/O error on sda3
    Dec 02 09:44:31 [kernel] [ 694.804537] ata1: EH complete
    The other partition works well on same disk as I wrote above.
    Is /home on /dev/sda3?

  • Read-only radio button or checkboxes save as null

    Hi,
    I have a form with some fields that are editable by 1 group of users and read-only for another group in certain conditions.
    Before the header there is a fetch process to retrieve values from tables. So most fields (read-only & editable) are populated including checkboxes & radio buttons.
    All users can edit at least 1 field on the form.
    When the save button is pressed a PL/SQL process runs to save the data.
    The save works if the field is editable.
    If the field is read-only and text it also works.
    But if the field is a radio button or checkbox a null is saved in the table.
    Any suggestions on how to get the PL/SQL to pick up the read-only radio buttons and checkbox values?

    Hi,
    I had the same problem in my application and I found another solution instead of using two items. I'm using a computation on page processing that makes a select on my table to get the value for the checkbox. I'm doing this with the same condition as my read-only condition on my checkbox item so I can get the database value when it is lose in the submit process.
    Also, I found a difference in the html code between the read-only state of the item and the standard state.
    Original state : name="p_v07" (7 because it's the seventh item on my page)
    Read-only state : name="checkbox"
    I tried to modify this using firebug in execution of the page but without success, the problem is still there.
    Patrick
    Insum Solutions

Maybe you are looking for

  • Reformatted disk but nothing appears in Mac OS X Installer

    Hello, Please help. I am stuck in a situation where I have erased the disk on my iBook G3 but the Mac OS 10.2 Installer doesn't recognize any destination disk or volume on the iBook so I can't reinstall the Mac OS. Background: I formerly had Mac OS 1

  • What is the MD5 or SHA1 checksum for Mac OSX Mavericks 10.9.2 InstallESD.dmg

    As like in title, What is the MD5 or SHA1 checksum for Mac OSX Mavericks 10.9.2 InstallESD.dmg ? I see a strange dates in installation files, so I ask, for security.

  • Remote

    I can't hear my midi or the keyboard in the logic program

  • Satellite C850-A797 webcam doesnt work

    I have Toshiba Satellite C850-A797 and my webcam doesnt work I think it is because of Windows update and *the new software interrupt every time i download it,* It is problem of the server of toshiba as i think PLEASE HELP!!!!!!!!!

  • Long running programs

    Hi, some of the time we get the situation where program (in background job) takes unusal time for execution and it will keep running... I checked the memory utilization...logs..dumps....but no success.... when i go to SM50..I see only user and Report