K210 will not connect to secured network

My Lenovo K210 system running Vista will not connect to a secured wireless network. I added a Tenda, and Netgear USB wifi stick as well as a Rosewell PCI card (removing each before proceeding to the next element.). It will see the secured network, and will allow for input of the PSK key, but it will not connect saying "Windows cannot connec tto <SSID>" with "Diagnose the problem" or "connect to another network". Diagnose the problem results the same. I end up connecting to an unsecured router I have set up on an old broadband connection. The PCI adapter will handle WEP, WPA and WPA2.
Is there something that could be changed to allow for connection to a secured network?
Thank you,
WIlliam

It sees the network, there is no error message just showing the circular emblem and not the check next to the network. I do not know about other networks since I am at home and just started this morning. I can connect to my MacBook Pro with Bluetooth.

Similar Messages

My iPod touch 5th generation will not connect to secure WiFi networks.

My 5th gen iPod touch will not connect to Secure wifi networks. It always says incorrect passcode. I have checked the passcode over and over again and I am sure it's correct. it's not just happening with my home network, also at work it never works. It is fine connecting to unsecure networks though. please help me.

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPhone WiFi will not connect to home network.

iPhone will not connect to home network. WiFi is on and correct password is entered. iPhone error msg says incorrect password. Reloaded network software and did not activate password but iPhone still shows network as locked.

Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
These steps are just a guideline and its not 100% that it will fix your issue.
Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414
You will need to access your Admin control panel for your router.
If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
Enter your credentials and you will have access to the settings from there.
For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
If you are using anything other than an Airport BaseStation:
Open a web browser:
In the address bar, type:
192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
How to figure out what the IP address is to type in?
Windows:
Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
Mac:
1.From the Apple menu, select System Preferences.
2.In System Preferences, from the View menu, select Network.
3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
The number next to "Router:" is your default gateway.
Once you get into your admin panel do these setting changes.
1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
6.Go to Settings > general > reset > reset network settings
7.Power the phone off and on. Connect again
For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398

I have a RCA media streamer that will not connect to my network with a new airport extreme.

I have a RCA media streamer (Model # DSB872WR) that will not connect to my network with a new airport extreme.I had to create a new network and my computers are connected but media streamer will not. Can anyone help? Thank you

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

My wireless internet is working with all of my other devices but my imac will not connect to the network?

Can anyone help? My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

First run Software Update to make sure your iMac is up-to-date.
Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences

TS1702 my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet????

my ipad2 was restored twice as it will not connect to my network, so what steps must I take to get iCloud and my ipad2 to work together and how do I connect so I am on internet???? I connect tp my mac mini. It is on my own network. Mail and Safari open on it just can not get my ipad back online!!! HELP! LOST HERE!!!!

Uwdawgfan-
Your new router may not correctly handle Bonjour data required by AirPrint. Contact Frontier to correct the router's setup. A firmware update may be required.
Fred

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. Still no connection.The "wheel" turns for 2 sec. then stops w/o connecting?

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting. Anyine have a solution to this issue?

I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5). Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.

IPhone will not connect to secure WiFi

i have an iPhone 3G. i have had this phone for over a year. recently, this phone will not connect to my home or any other secure wifi network. ive tried 3 other iPhones on my network, and they all connect. i have turned off the security and it connects right up to the network.
i have taken several steps to reset my iPhone. i have restored it from an older backup, as well as restored it as a new device. does anyone have any other troubleshooting steps known.
any advice will be greatly appriciated.
thank you.

Are you using MAC address filtering on your router/modem?
http://en.wikipedia.org/wiki/MAC_address

Macbook Pro 10.6+ will not connect to wifi network

Having a strange issue with one particular Macbook Pro not being able to connect to the internal wifi. There are 5 machines, mix of Windows and OS X, none have this issue. We have a wireless network coming from a SonicWall router with wireless capability. This particular Macbook will not connect to the wifi. Just an "!" symbol around the wifi. It has no issues connecting to any other wifi in the area, even to a second on within the same floor.
What are steps to troubleshoot? I am an advanced Windows user and would check ipconfigs, flushdns, among plethora of other things. I am not so sure about what to do in OS X (10.6 or 10.7, not sure).
Any guidance would be appreciated.

I can assure you it is not the router. I am pretty good with Windows and Networking, particularly these model routers. This is an issue on the laptop. I feel as if it keeps remembering old credentials to this wifi network (when user kept typing the wrong password). Once I changed the WiFi password, it no longer even asks me to update the WiFi password when attempting to connect. I have to manually try to connect to it by inputting SSID and password and still does not accept.

Outlook 2013 will not connect to specific networks outside the office

Outlook 2013. I can connect to any Wi-Fi network I have attempted...but Outlook 2013 will not connect to my home network. I have tried clearing the dns cache as well as re-creating the account. Outlook works fine at the office, fine at
hotels, fine at restaurants, but won't connect at my house using either a wired or Wi-Fi connection.
Any suggestions?

Hi
As per the information and details provided by you, to connect the Outlook 2013 from outside the office, please follow these steps: -
This is usually the result of authentication issues. In order to prevent strangers from using their
SMTP server to send spam, many ISPs require users to authenticate when they try to send email while accessing the server from outside the network. In many cases, users will also need to use a different
port number and may need to use SSL.
To check or change the outgoing server authentication, you need to open the
Account setting dialog. In Outlook 2013, this is on the
File tab.
Click on the email account, then click the
More Settings dialog and select the Outgoing server tab to check the authentication settings.
Enable
My outgoing server (SMTP) requires authentication and select
Use the same settings as my incoming mail server. These settings will often work both at home and when travelling.
You will also want to check the port and
SSL settings on the Advanced tab. Commonly used port number are
587, 465, and 1025 but if these don’t work, you will need to check your mail providers support pages for the correct port number. You may also need to select
SSL or Auto for encrypted connections, again, this information should be on your mail providers support website.
Note: - Once you make these changes, you should be able to send email from home.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Printer will not connect to wireless network

I have followed all the troubleshooting ideas, but still keep getting the following message... "This computer appears to have a working internet connection, but cannot find "Deskjet 2540 series [CA8F2C]._ipp_tcp.local." You many have typed the address incorrectly." Does anyone have any ideas what to do to fix this problem?

Hi , Welcome to the HP Forums! I see that your HP Deskjet 2540 will not connect to your wireless network on Mac OS X 10.7. I am happy to help! Please try the steps within the following guides: 'Printer Offline' or 'Printer Not Responding' Message (OS X).Printer Does Not Maintain Wireless Connection.How to troubleshoot Wi-Fi connectivity in OS X Lion or earlier. Hope these guides are helpful, and have a nice day! “Please click the Thumbs up icon below to thank me for responding.”

HT4199 I am trying to connect a new ipad air to my home wireless network. upon entering the password the ipad will not connect to the network. the network is good.

I am trying to connect a new ipad air to my home wifi network. The ipad sees the network, asks for a password but will not connect. Password and network are good.

Hi there sibisjo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

My itouch will not connect to my network

My itouch will not connect to my wireless network i cannot get itunes to connect either ? cananyone please explain

This is exactly what's happening to me. It says that it is connected but when I try to connect to like safari or iTunes, stuff like that, it doesn't work!!!!!!!

Officejet pro 8600 will not connect to wireless network

I have an new Officejet Pro 8600 that I am trying to set up. I have run the the wireless network setup wizard multiple times. It recognizes the wireless network router asks for the WEP code and then thinks for about 5 minutes before returning a message: "Unable to connect to the network"
The wireless network test results suggestes that MAC address filtering may be the problem. There is no MAC filtering function activated on our wireless router.
The wireless router is a Verizon Actiontec MI424-WR 802.11 b & n
We have computers running both Windows XP and MAC OS X.
One of the reasons that we purchased this printer is for the wireless capabilities. If it will not conect to the web then it may be going back.

Hello,
Based on the provided details, I believe the issue have something to do with the wireless security settings of your router.
Please follow the steps below to access the Advanced Security Settings:
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/ActiontecMI424/125511.htm
Below you will see the Network Authentication settings.
Select either Open System Authentication or Both.
Shared Key Authentication is not supported by the printer, and i believe this might be the cause for the connection failure.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT5622 My ipad will not connect to my network

My ipad 2 has lost connection will not re-connect to my network (AT&T). It shows my router network but does not connect.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

K210 will not connect to secured network

Similar Messages

Maybe you are looking for