K320 Rescue and Recovery Stuck, need help!!!

Hi everybody!!!
My K320 has stuck when i tried to recovery the system. It show the command line window during the process. But nothing then happen.
Link to picture
Thanks in advance for any suggestion!!!
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Thanks ortegaluis for your reply.
First time i start the rescue and recovery i though it perform some task, then i leave it run and go to sleep (about 7 hours), when i wake up... there is nothing change, still that screen with the command line window.
@ ortegaluis: i did as you said then the computer restart and nothing change. Can you give me another suggestion?
I tried to install new windows by ISO file i downloaded from this link :http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso . The setup was smooth but i could not active windows with the product key printed on the computer label. Can someone show me how to active windows with the product key printed on the body computer?

Similar Messages

Error 25014 when trying to install Lenovo Thinkvantage Rescue and Recovery! Please help!

Hi there! I recently restored my laptop with a general copy of Windows 7 pro 64 bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but had never used it. I tried to reinstall it today and it kicks back every time with the same error message (error 25014 code=6)! I had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used ( i have no clue how to combine them). Any advice as to how to get it working will be appreciated! Thanks for your help in advance!
Solved!
Go to Solution.

Error 25014 rc=6 is error installing the RNR boot manager.
Provide some information:
(1)Did your machine ship from Lenovo, with Lenovo factory system? If so what operating system was installed? vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).
(2)you state: I recently restored my laptop with a general copy of Windows 7 pro 64 bit
Does this mean you DID not do a Lenovo factory restore, but actually installed a retail version of win7 pro?
I will assume win7 pro retail for now.
(3)you state: I had installed Rescue and Recovery before but had never used it.
Was this in the past, lets say, on a factory shipped Lenovo system?
(4)you state: had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used
===
It appears to me, your HDD had a system on it. I see Ubuntu mentioned in your other posts. Your HDD had multiple parttions on it, including the 21GB partition. Then you decided to install a retail version of windows 7 pro.
During a install of retail windows, you have to pay close attention as to where it will install.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
Note steps 7 and 8.
It appears you did the windows install ON TOP of existing HDD, with preexisting partitions.
===
Rc=6
The simple answer is RNR is already installed. Did you uninstall RNR before the install?
The complex answer:
When RNR install went to add its entries to boot manager,BCD (boot control data), it did NOT like the contents of the BCD, ie other entries parked in the BCD,ie, Linux. It expects to have 2 BCD slots used, windows and windows RE.
===
Give this some thought. See if it matches your situation.
==
I would erase the HDD via a standalone utility, then install win 7 pro retail, and all issues should clear up.
This Erase/delete can be done during windows install. see steps 7 and 8 above.

Can not restore factory operating system by Rescue and Recovery lenovo 3000 N200 - please HELP!!!

Hello,
I am in very big problem hope you can help my with it!
i have lenovo 3000 N200 Notebook , my operating system since yesterday i have been formated the partition C after Rescue and Recovery didn't help and install a diffrent OS, i didn't delete the lenovo Partition!!
now i can't access the Rescue and Recovery
my qustion is - can i some how restore the factory OS by Rescue and Recovery??
TNX
Tal,

The only other option, before calling service and ordering recovery disks, is to try the Rescue and Recovery - Recovery repair diskette. And yes, a floppy drive will be required.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Rescue and Recovery and Client Security solution question

I got a thinkpad edge e220s for home use and I am trying to figure out whether these two thinkvantage tools will be of any use to me since I am not on a company network or anything (all the marketing material mentions IT admins etc).
Is rescue and recovery just a backup solution with disk imaging (like ghost)? I use a drobo for all my data storage so I am not too concerned about backups as the drobo offers redundancy in case of drive failure. The laptop has an SSD which doesn't have a lot of capacity so I do not want unnecessary tools that will take up a lot of space. However if rescue and recovery offers really helpful features then i might consider installing it (and just not using the backup feature). I could not make out what the marketing material meant by one button solution for viruses and crashes.
Secondly, does client security solution offer features other than password vault/manager on my model? I am already using the beta for the new version (4) of password manager which is standalone and does not require client security solution. Again the marketing material does not help a home user like myself understand it very much.
Any help will be appreciated!
Solved!
Go to Solution.

Based on your description I don't think Rescue & Recovery or Client Security Solution have any value for you.

Rescue and Recovery and ThinkVantage

WindowsXP was initialy installed. Now, i want to restore system to factory defaut settings.Acourding to Operation Manual. Chapter 4. Recovery optionsIntroducing Rescue and RecoveryIf Windows is not running properly, use the Rescue and Recovery workspace
to help solve or identify your problem. Do the following:1. Turn off your PC, then turn it on again.2. Watch the screen carefully while your PC starts. When “To interruptnormal startup, press the blue ThinkVantage button” message is displayed
at the lower left of the screen, press the blue ThinkVantage button. The
Rescue and Recovery workspace opens.3. After the Rescue and Recovery workspace opens, you can do thefollowing:v Rescue and Restore your files, folders, or backups.v Configure your system settings and passwords.v Communicate using the Internet and link to the support site.v Troubleshoot and diagnose problems using diagnostics.
The hidden partitition named "SERVICEV001" exist.
I shutdown laptop for 5 seconds and enable it, and after push the blue button, i can't see any restore options (see the picture)
What im doing wrong?
http://i2.photobucket.com/albums/y34/ban-shee/IMG_0057.jpg
Model: Lenovo T61 - 7661Z1K
Message Edited by banshee on 06-29-2008 06:34 AM

frontleft wrote:
Haven't tried this but it sounds promising:
RRUtil.exe > "RRUtil.exe is an administrator tool which can be used to customize parts of the Rescue and Recovery PreDesktop Area"
URL: http://www-307.ibm.com/pc/support/site.wss/TVAN-ADMIN.html
Alternatively*, you can delete the hidden system folder C:\RRBackups in Safe mode, but do rebuild another backup after this...
Boot into Safe Mode,
then in the Windows explorer,
go to Tools>Folder Options>View.
Select "Show hidden files and folders.
Deselect "Hide protected operating system files"
Apply. Delete contents of C:\RRBackups
* I had 70% of my 160GB hard drive utilised by the R&R backups, so I deleted all my backups instead.
*I have to do a backup now...
Be extremely careful if you do this. The backups are tracked in other places than just the folder location on the hard drive and simply deleting them from the folder (which is not expected behavior) can cause problems. If you opt to do this, I recommend "deleting" them again via the RnR UI to clean up references in the registry, etc.
Also, if you find your backups are taking up an unusual amount of space, be sure you're running RnR 4.2. This version cleans up some issues with Single Instance Storage (there's a patch for it on TVSU as well) that would cause the use of excessive storage.
Full disclosure: Lenovo issues my paychecks.

T61 Boots to "Rescue and Recovery

I'm a desktop support tech working on an issue with a T61 that has started booting to Rescue and Recovery every time it is booted on a docking station. It seems fine when off the doc. I booted several times off the doc and it boots normally. I booted several times on the doc and it goes to Rescue and Recovery.
Any help with a fix would be appreciated.
Thanks!
Kevin

Excellent. Now how about clicking that "Accept as solution" button
Do you have a friend with cable/DSL who can download and burn SP3 for you?
From List of fixes that are included in Windows XP Service Pack 3:
This article lists the problems that are fixed in Windows XP Service Pack 3 (SP3). Service packs are cumulative. This means that the problems that are fixed in a service pack are also fixed in later service packs. For example, Windows XP SP3 contains all the fixes that are included in Windows XP Service Pack 2 (SP2).
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HT201210 i can't restore my iphone4 from 5.1 to 6 and it stuck in recovery mode need help

i can't restore my iphone4 from IOS 5.12 to IOS 6 and it stuck in recovery mode need help please

Read here > http://support.apple.com/kb/HT1808
Hope that helps.

Need Help Installing Rescue and Recovery 4.3 Windows 7

Hi there,
So I'm having a strange issue installing Rescue and Recovery 4.3 on my TP T61. I keep getting an error message stating: "It is required to install the Microsoft Visual C++ 2005 Redistributable (x64) Service Pack 1 before you install the Rescue and Recovery program."
I have already installed C++ SP1. I've also tried installing/uninstalling it as well. Still no luck!
Here is a link to the installer:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73612
And here is a link to the C++ SP1 file:
http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14-984d-389c36f85647&displa...
Any Ideas?
Thanks,
Peednus
T61
T7100 @ 1.8 GHz Duo
2GB RAM
Windows 7 Home Premium (x64) (Clean Install)
T420s, i5-2520M @2.5, nVidia 4200m, 8GB DDR3, OCZ Vertex 3 Max IOPS 240GB SSD, Hitachi 320GB @7200rpm ulrabay, 8Pro x64
T61, Centrino Duo @1.8, GM965, 4GB PC2-5300 DDR2 @667MHz, OCZ Agility 120GB SSD, 7Pro x64

Hi peednus,
The C++ 2005 SP1 installer you are trying to use is for x86 (32 bit). The error message you quote says it needs the x64 (64 bit) version. Try
Microsoft Visual C++ 2005 SP1 Redistributable Package (x64)
If you're really running a 64 bit Windows install, that should/might get you going.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

X61s Type 7669 - URGENTLY need the Rescue and Recovery CD (1/1)

Can someone please help, I need the Rescue and Recovery CD (1/1) as I have all the other Recovery CDs but I can't find the one I really need.
Is anyone able to create an image (.iso) file that I can download?
PLEEEEAASE HELP!

ukdealguide,
You're asking someone to make an illegal copy of a Microsoft/Lenovo CD. That's also against forum rules.
Call Lenovo for a new Rescue and Recovery CD set.
Thread locked.
Message Edited by bananaman on 05-18-2009 06:43 AM
I don't work for Lenovo. I'm a crazy volunteer!

Rescue and Recovery has encountered a problem and needs to close

I'm running R&R 3.10.0022 on a ThinkPad T42p 2373-HTU and encountered the Rescue and Recovery has encountered a problem and needs to close error. When I tried to install the advertised patch with rnr31cp5.exe, I get an InstallShield Wizard dialog box that says "Could not find any previously installed compliant products on the machine for installing this product" and the install fails.
I then tried to reinstall the Microsoft patch that seemed to have caused the original problem, KB917422, which told me that a more recently installed service pack made this patch (KB917422) unnecessary.
Bottom line: I can't run R&R. And I couldn't find a Lenovo R&R update for my machine. Any ideas please?
Al Vesper
Solved!
Go to Solution.

Hello mate,
Try to uninstall completely R&R and install the latest version.
You can find it there : http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-76226
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Rescue and Recovery's disk management is pathetic and senseless, please help.

I'm using an X61 (which i've been very happy with, by the way, not that this is relevant) which has Rescue and Recovery installed by default. This is okay, as I see the value of regular backups. However, the default setting is to keep a history of 5 of the last backups. Each backup consumes ~10gb of space for a total of about ~50gb if I let the program run as it came configured, which is totally unacceptable for a machine that has 100gb of storage. That's my first complaint.
Second, I've attempted to neuter the R&R's idiotic disk usage behavior by reducing its maximum number of incremental backups. Oh, trouble. The program will not allow me to have any less than *3* incremental backups, for about ~30gb disk usage. Why does this program insist on dictating how many backups I choose to keep on hand? Ridiculous. I think 2 incremental backups would be reasonable, but R&R will not allow this.
Third, I have also attempted to repair the situation by deleting old and unnecessary backups. Oh, trouble again. Upon attempting to delete some of these backups to *free up space*, it notifies me that it cant, because it *lacks available space* (!!!!).
Whoever designed this program's behavior should start thinking about a career change, imho. Or perhaps I am at fault and it is merely my ignorance that is preventing me from using this application properly. I do hope it's the latter, as I typically have great faith in anything produced by IBM/Lenovo... but this just has me extremely frustrated. Please send any words of advice, I thank you all in advance.

I do not have an answer to this, but if you can tell me where I can go to actually attempt to delete the "backup" that R&R *did* create on my local drive, I would be most appreciative. I had never used it (R&R) before (and I have used TP's going back *a long* time!) so I assumed when I tried it the first time that it would ask me where to put the backup, e.g. on the network, external drive, &c. Instead, it started backing up *everything* to my local drive. While it was running, I had to close the Tablet, which apparently did not make R&R happy.
Bottom line: my 100GB HD is already down to 25GB free (and it is only a month old), the "backup" apparently did not complete successfully so R&R will not recognize it to delete it. So, I have a worthless backup taking up a ton o' space and I cannot find it to delete it. HELP!!! Next time, I will know to have R&R set up *before* running it to back up to the network. (or, based upon the original post to this thread, I may just manually back up my data or save all my important stuff on the network to begin with and let the sysadmin guys worry about backups!)
If anyone even knows what the name of the backup file(s) is/are, that would be a start.

Rescue and Recovery - Need to restore data

I had Rescue and Recovery going on a N100-0768 laptop using Vista Business. Recently that laptop was stolen. I've purchased a G550 with W7Pro. Now I cannot install Rescue and Recovery 4.3 for W7 because apparently this G550 isn't in the list of supported Lenovo systems. I need the critical data I've backed up - how do I access that data?
Thanks so much in advance.
I do miss the N100 - it was a great laptop!
- James Head

Have the same problem myself, there is no available download for OneKey Recovery for WIn 7 64bit. I had the 32Bit RC Build 7100 installed previously and used the Vista version and it worked OK before, no such luck with the 64bit version. I'm irritated right now as I also need to back-up critical data, I'm using the Window back-up and Win Rescue disk but it defeats the purpose of having the OneKey Recovery Key.

Rescue and Recovery (XP v. 4.21) options and help

Is there a manual or reference for the Rescue and Recovery tool? I'm trying to set up periodic backups from two Thinkpads to a USB hard drive but am running into this problem: when I select the USB hard drive as a destination I can't seem to designate a folder so it backs up to the root of the drive. I'm afraid that backing up a second Thinkpad to this drive will corrupt the backup sets for both. That's why I would like to tell RandR to backup to G:\Thinkpad1 for one laptop and G:\Thinkpad2 for the other laptop. Is there a way to do this? Thanks in advance!
P.S. I've skimmed the Deployment manual but didn't see what I was looking for. Did see some command line options but either I didn't understand them or what, but I don't think I saw any helpful info there.

Hi,
yes, that is correct, there RnR log files are the most important in this situation, because they contain the informatin, where exactly it's strugling.
In this situation make sure, that:
- there is no background window => press ATL+TAB and see if the appliaction is not waiting for some confirmatino
- there is not the UAC prompt=> the best would be (only for testing purpose) to completely disable the UAC
- there is the Antivir application disabled => this is dus the the fact, that I have seen multiple times, that the Antivir was blocking the RnR application from collecting the files, or backup process, because it was accessing security files
Let me know, if any of the above will make any change.
Cheers

Help with Lenovo Rescue and Recovery 4.31

Hello,
I work for a company that uses Ghost images for deploying laptops. We have recently decided to try the Lenovo Rescue and Recovery software built in with the new T520s when doing our local backup before sending the laptop out to the user.
What we decided to try is building the base image, creating the backup locally on the computer using R&R, dumping the image to our server using Ghost and then imaging other laptops with that image.
Our reasoning for creating the local backup first, is that time is not that big of an issue when creating the initial image, and neither is imaging other laptops because we create spares that we have built and ready to go out. What we would then do is apply any updates since the laptop was imaged, and have R&R create an incremental backup again, which would only take a few minutes and the laptop would be ready to ship.
Upon using this method, we have found that you cannot view the original first backup created in R&R on a laptop that it was not created with. The backup content is there, as the drive space is used and booting into a DOS prompt and browsing the C:\RRbackups\SZ\<UID>\ folder shows the data.
What I'm looking to know is how the R&R software generates that UID, and if anything can be done to allow the other laptops to recognize, whether it's rename the folder with a UID that the new laptop is going to use, or if it's something within the software files that's changable. Or even the registry.
Any ideas or suggestions would be great.
Thanks!

kylejg, welcome to the forum,
R&R is a little system specific. How many systems are you expecting to deploy using the method you describe?
It might be worth taking a look at the "Big Brother" of R&R namely Image Ultra Builder as it should be able to, with ease, realise exactly that which you are aiming for.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Rescue and Recovery 4.3 on Windows 7 Pro

I've just upgraded my ThinkPad R61 to Win 7 Pro, successfully installed all Win 7 ThinkVantage software and here starts my problem:
When I try to create a backup using RnR 4.3 I get "Gathering system settings and data. Please wait" window, r2r.exe is working for a few minutes and that's it. Nothing more after 11 hours. I thought it may be related to ESET Smart Security, but no.
Part of rr.log:
Wed Nov 04 23:47:02 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Wed Nov 04 23:47:02 2009 RescueRecovery: Getting GUI mask is 16
Wed Nov 04 23:47:04 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\rrstrigger.exe -start
Wed Nov 04 23:47:04 2009 RescueRecovery: Getting GUI mask is 16
Wed Nov 04 23:47:07 2009 RescueRecovery: Set LOCAL to UUID and reload backup before create backup!
Wed Nov 04 23:47:07 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:07 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:08 2009 RescueRecovery: C:\Program Files\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
Wed Nov 04 23:47:08 2009 RescueRecovery: g_pTVTSchedulerInterface is NULL!
Wed Nov 04 23:47:08 2009 RescueRecovery: Get back from GetTaskNextRunTime and return value is 0, next run time is 2009-12-1 12:0:54
Wed Nov 04 23:47:08 2009 RescueRecovery: Set LOCAL to UUID and reload backup before delete backup!
Wed Nov 04 23:47:08 2009 RescueRecovery: In GetBackupFolderName, get local UUID!
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:08 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Second, \common\backups.dat
Wed Nov 04 23:47:09 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\USB, \common\backups.dat
Wed Nov 04 23:47:17 2009 RescueRecovery: Loc=1 NoPrimary=0
Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:17 2009 RescueRecovery: In GetBackupFolderName, UUID is 0000000000000000-0000000000000000!
Wed Nov 04 23:47:17 2009 RescueRecovery: loadBackups() - deleteRegistryKey SOFTWARE\Lenovo\Rescue and Recovery\Backups\Local, C:\RRbackups\SZ\0000000000000000-0000000000000000\common\backups.dat
Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
Wed Nov 04 23:47:22 2009 RescueRecovery: Get the shutdown flag from service is 0
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: C:\Program Files\Common Files\Lenovo\msgbox.exe /t=56 /id=65 /wait
Wed Nov 04 23:47:29 2009 RescueRecovery: In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\0000000000000000-0000000000000000
Wed Nov 04 23:47:29 2009 RescueRecovery: CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /inheritance:r
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: C:\RRbackups\*
Wed Nov 04 23:47:29 2009 RescueRecovery: icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /inheritance:d
Wed Nov 04 23:47:29 2009 RescueRecovery: Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-1-0
Wed Nov 04 23:47:30 2009 RescueRecovery: Running: icacls "C:\RRbackups" /remove *S-1-5-32-544
Wed Nov 04 23:47:30 2009 RescueRecovery: getting index is 1
Wed Nov 04 23:47:32 2009 RescueRecovery: BackupThread Started. There are 1 partitions to back up
Wed Nov 04 23:47:32 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\instapps.exe /capture
Wed Nov 04 23:47:33 2009 RescueRecovery: Running: C:\Program Files\Lenovo\Rescue and Recovery\Migration\bin\r2r.exe /c "C:\SWSHARE\capture.sma"
Thanks in advance for any help.

I have:
1. Instslled a new 160GB, 7200 RPM Lenovo HDD
2. Clean installed Win 7 Ultimate (retail) x64
3. Clean installed all Lenovo and Microsoft Win 7 x64 updates
On my:
Lenovo T61p, T7700 2.4 Ghz, 4 GB Ram
I downloaded Rescue and Recovery..tvtvrnr43_en.exe and saved it to my desktop.
When I go to install the RnR I get the following error message:
"Microsoft Visual C++2005 Redistributal (x64) SP1 needs to be installed before you can install RnR".
One of Microsoft's important updates was the above MS Visual C++ which I installed.
I phoned Lenovo support in Atlanta and they said they offer no support on a retail version of Win 7. They
said that I was "missing some kernal" that came with the original OEM software which isn't on a retail clean
install. I'm baffeled since all other Lenovo Win 7 updates were able to be installed and are working properly.
I'm stuck. Any Suggestions please.
Thanks,
Altoid666
T530,Core i7-3820QM,16GB Ram, Intel 530 SSD 240GB, Blutooth 4.0,Ultimate-N 6300, 15.6 FHD, Nvidia NVS 5400M., All software current.,
Windows 7 Ultimate x64 , SP1. Office 2013 Professional

K320 Rescue and Recovery Stuck, need help!!!

Similar Messages

Maybe you are looking for