K3b's verify optin doesn't work
It writes fine. When the writing process completes it opens the tray but it doesn't close it again for the verification process to take place. The program doesn't freeze. If I push the cancel button it responds fine. I closed the tray by the open/close button but the process didn't start. The system could read the disk without any problem. Have anyone else this problem?
k3b 1.0.4-1
azleifel wrote:Just thought that I'd share this: As there didn't seem to be any activity with Bug 151816 at the time, I fiddled around a little and found that verification will work here if k3b is set it to not eject the medium after the write process is complete (Settings -> Advanced, Miscellaneous, Do not eject medium after write process).
Confirmed! It works for me too.
Similar Messages
-
Rented last week. Now cant
Go here, click on "Manage My Apple ID", see if you can verify here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ -
Can't verify disk, and consequently can't repair......system freezes up and I have to do a hard shut down.
Suggestions?Hi, and welcome to Apple Discussions.
Starting up in Safe Mode is another way to repair the hard drive. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk, just as repairing it from the install disc does.
You will see your normal desktop. Once completely started up in Safe Mode, restart normally, and go to Applications > Utilities > Disk Utility. I always take this opportunity to click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. (It should say "Verified.")
Select the named boot volume in the left sidebar ("Macintosh HD" unless you've renamed it). Repair permissions on it. -
I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?
You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’. -
Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
Link to verify apple id that I get in my IN box from Apple doesn't work, what next?
Go here, click on "Manage My Apple ID", see if you can verify here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ -
've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences. The message says I will get an email to verify but I never get an email. I've checked old email, blocked email, and have low filters on emails. Any ideas?
Hey CarolinQc,
Thanks for the question. The symptoms you are experiencing can result from an Apple ID address that has been changed prior to signing out of all of the services. Before you change the email address associated with your Apple ID, you’ll want to sign out of all services to avoid this. As a fix, you can temporarily change your Apple ID back to the old address:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
- Scroll down and tap Delete Account, then tap Delete to confirm.
- Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
- Enter the password for your previous Apple ID.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Return to Settings > iCloud and sign in with your new Apple ID.
Additional Information:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M. -
When I want to DL an app and after I enter my ID and password , DL starts . But then a message shows up and want me to verify my payment info. And redirects me to that page . Every thing I do on that page it doesn't work and then I can't DL.
Do this on your iTunes program on the computer instead. Your Credit Card used on the profile is probably maxed.
-
My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.
Have you tried accessing the email from another computer, device, email client or web browser?
-
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again. -
I tried to buy something on ITunes like I've done many times before but, for some reason this time it says it's my first time using this computer (which is not) and i must verify my own identity on my own account and answer the security questions i don't recall doing. I never had a favourite teacher or a childhood nickname. So i try to fix that problem and i have to do the forgot my answers thing but the email for it doesn't work. So I can't answer the questions I haven't answered before and to reset it with a email that doesn't work.
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
If you're desperate, create a new Apple ID. Doing this will leave you stuck with managing two permanently.
(93405) -
EMET 5.0 Pinning Rule doesn´t work
I have installed EMET 5.0 on my Windows 7 pro system. I have configured a pinning rule for my internetbank exactly the same way as i did with EMET 4.1. But when I apply a different certificate
from my bank's to test the rule nothing happens - no warnings when I log in to the internetbank. Except once!. With EMET 4.1 the warnings never failed to show.
The new EMET 5.0 blocking function doesn't work at all (which is very disappointing, as this was the main reason why I upgraded to EMET 5.0).
Anyone who knows how to do to make this work?
I tried to enclose screenshots of my current configuration, but got the error message:
"Body text cannot contain images or links until we are able to verify your account."
But i don't understand how to verify my account...sorry...This morning I:
1. Logged in as administrator on Windows 8 (Swedish version).
2. Installed and configured EMET 5.0 with recommended settings and added pinning/blocking rule for my internetbank. Imported certificate different from that used by my internetbank.
3. Logged out.
4. Logged in as standard user.
5. Launched Internet Explorer in desktop mode (didn't run as administrator).
6. Tried to log in to my internetbank – pinning rule blocked login, nice!.
As you stated before, pinning rule does not work as one would like on Windows 7 (I have windows 7 professional English version).
Have not yet tried to use EMET logged in as administrator on Windows 7 but why bother? I agree with you, not a good idea to log in as administrator and then use internet…
I will use Windows 8 for my internet banking until this is resolved.
Thank you! -
Itunes doesn't work on windows 8.1
after the upgrade to windows 8.1 (I have a HP Henvy H9 x64), itunes doesn't work. I unistalled all the apple software; I restarted the PC and then I installed again itunes (the last version 11.1.5 x64). When the installation finish and I start itunes give me this error "impossible to find the file c:\program files (x86)\itunes\itunes.exe". Verify that the filename is correct and try again.".
Somebody could help me? ThanksHello Lorenzo 1972,
It sounds like you are unable to open iTunes even after a fresh install with the error that it cannot find the iTunes.exe file. That path, c:\program files (x86)\itunes\itunes.exe leads to the 32 bit program folder for iTunes. If you are using a shortcut you had on the desktop pre install, try going to C:\program files\itunes\ and finding the iTunes.exe file there.
If not it sounds like iTunes may be installing a damaged copy of the 32 bit version of the application, so I would recommend the following article to help you get any old installation files out so you can install the 64 bit version fresh:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
My address bar where I type in the URL has disappeared. I've searched through Help options, and found only one piece of moderately useful information (following) in Menu Reference. It is: "Open Location- Focuses on the Firefox URL bar so you can type
-
Multiple Fiscal Calendars Displayed in Subject Area Time Dimension
Hi all, Thanks for taking the time to review my post. Environment Oracle BI Applications 7.9.6 Financial Analytics Oracle E-Business Suite 11.5.10 Query The Time dimension on my Subject Areas (Financial Analytics) are showing more period data than I
-
How to tell what data is being transferred
We have an Iomega StoreCenter ix2-200 and it is constantly busy doing something but we can't figure out what its doing. Is there some way where we can tell what files are open on the device? The blue light is on all the time. We have this unit share
-
seeing beach ball almost all the time when clicking and anything. Seems to take 1-2 seconds to handle each and every command. saw an article that Linc Davis posted last year and cut and pasted the command syslog -k Sender kernel -k Message CReq 'Chan
-
Skype does NOT start up with Windows
When I boot up Windows, Skype refuses to load with it even though it is enabled to do so in the Skype settings. Windows 7 Skype 6.21.0.104 Solutions tried: removing and reinstalling Skype and checking/unchecking the Start Skype with Windows checkbox.