K410 with gtx 760

Hello
I have had a lenovo k410 for 5 months now and am considering upgrading the stock GEforce gt 620 to a gtx 760 along with a necessary power supply upgrade(from the stock supply). Ive seen on the manual that the 760 is not compatible with the k410 but read that there is some way to bypass this issue. Has anyone done this and what type of power supply would you recommend for a gtx 760 that would work on the k410. Any help would be greatly appreciated

Using a free download of Windows 8.1 RTM, I installed on an empty disk, it created a GPT Boot partition with two boot loaders. After this 8.1 was installed, if I added the Zotac GTX 760, the machine was not able to boot to BIOS, but would eventually boot to window 8.1.
The machine was sold to me with WIndows 7.
I don't know whether I can configure the boot loader on the Win 8.1 disk to launch the Windows 7 on the original disk. or whether Windows 7 will recognise the graphics card.
Good Luck to anyone else !

Similar Messages

Help with Gtx 760 Hawk

I just purchased a GTX 760 Hawk today. I switched the BIOS to line 2, downloaded the latest Nvidia drivers, and downloaded the latest MSI afterburner beta version. I know that you can set the power limit to 185% but for me, it is stuck on 111%. I tried all of the settings, searched google, uninstalled and reinstalled the drivers and afterburner. Basically have been trying to figure this out for 4 hours and this is my last resort. Does anyone know what I am doing wrong as to why it won't let me set the power limit to 185%? I set to unlock voltage control and that works fine, but the power limit is stuck on 111%. Thanks in advance!

Yes I tried both line 1 and line 2. It wont let me change the power level. Also when I try to overclock the card past +20 core clock it will crash within about 2 minutes when running furmark or heaven. I tried uninstalling re-installing msi afterburner twice, tried uninstalling and reinstalling with a clean install of the nvidia drivers twice. I switched LN1/LN2 multiple times and restarted each time. I still cannot change the power level, and if I try to overclock it past +20 core clock it will crash. The card runs fine at stock settings and never gets over 50 degrees, I am also using a 750 gold standard PSU so It's not a power or overheating issue. I played a game at stock settings the card ran perfect, but when I try and OC it, even a little, it will crash while playing the same game. I would really like a solution to this to try to get this fixed so I don't have to return it.
S/N = 602-V300-01SB1308051501
Thanks.

Driver update problems with GTX 760

Hi all,
I have PC with Intel DH87MC MB, i7-4770 CPU and MSI N760 TF 2GD5/OC video card installed. Samsung P2350 monitor is connected via DVI.
When I first installed it, I got newest drivers for video card (320.49) at this time and everything was working ok. Later I got notifications about new drivers and there my troubles started. Every time I try update driver to newer one (334.89 for example), my display goes off during installation process and never comes back on. I have to turn off my PC, start it in safe mode, uninstall driver, boot to windows and install that 320.49 driver again. I've updated MB BIOS and drivers, but situation is same every time.
What to try next?
Thanks,
Zebediejus

Hi, sorry for late answer. This doesn't work too. I tried uninstall from safe mode, even deleted folders from program files. After installing new drivers (335.23) and reboot, got same problem - monitor goes off while windows are booting.
After this tried other way - again uninstalled everything from safe mode, booted in normal mode, installed old drivers (320.49) from DVD, rebooted - everything is working fine. Then I tried to "update" existing drivers with downloaded ones. Immediately after "Installing graphics driver..." message is shown, screen goes off, but installation continues (I see it by blinking HDD activity led). After reboot monitor is staying off until I remove drivers from safe mode. So, now I am back on 320.49 from my DVD. Any other suggestions where problem can be?
Thanks,
Zebediejus

HELP ME!!! msi ms 7740 with gtx 760 shuts down while in the game

Hi all, I have before yesterday bought a new gfx card gtx760 and each time if I'm gaming example AC4 after a certain time my PC completely shuts down and he starts up again.
Does anyone know why this is?
My psu is a N620 from ms-tech 620 w
My cpu intel i5-3330 a 3GHz
And my motherboard is an MSI MS-7740 (H61MA-E35 (B3))
could you guys please help me?????
Thanks, millenniumgamermsi

could be one of 2 things here!
1: temprature cut off (Please monitor the temps of your CPU and GPU when your gaming and tell us what they are?)
2: Power supply! that unit seems marginal at best as its a split rail unit and may be choking under load (if you have a higher wattage unit try that)

GeForce GTX 760 in D30

Hi guys
I am trying to use a GeForce GTX 760 in a D30 but it doesn't fit, the black plastic is a bit too high in order to close the case
Any solutions for this ?
Thanks
Solved!
Go to Solution.

Adobe - you are better off with GTX 760. Regarding Maya and 3ds Max - check Link for certified / recommended display adapters. Most likely K2000 will be much better for Maya. For 3ds Max it really depends on version you'll be using. GTX should be ok with 2013/2014, bcs it is much more powerful for GPU (Cuda) computing.
So it really depends on what SW you will use most of the time. Also - if you make money with your D30 (ie it is for business), you are eliminating risk of SW / driver compatibility issues, if you choose Quadro over GTX and you have more than just occasional work in Maya.
Regarding benchmarks:
check Link for example.
Edit: if you have a way to test it, May I suggest new Quadro K2200 instead K2000. It is not certified / officially supported with D30, but it is much more powerful card and will most likely work properly (I am 99% sure). Also GTX 770 may be worth upgrade over GTX 760 if you decide to go with consumer grade card.
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Quadro k4000 vs GTX 760. which one for AE

I have 2 Computers and planning to mix them up together as possible. I built a PC with quadro k4000 last year because I was graduated as 3D animator and i plan to work as Animator, plus I also have another PC with GTX 760. and now I'm currently working as Video Editor. so here are my questions:
- k4000 and gtx 760 which one would do better in AE and Pr ?
- I read some articles said: "quadro and gtx can group up together in one PC". is it really possible ? because some people said yes and some people said no and some people said yes but wont work together blah blah. I really want to know about it, because right now I already have these 2 GPU. and if YES. can you show me how to do it?
there are my both PC specs:
CPU: core i7 3820 3.66hz
RAM: 16GB
SSD 128gb
HDD 3TB
MotherBoard: Asus P9X79 PRO
VGA: asus GTX 760
Another one is:
CPU core i7-3930K 3.20GHz
RAM: 32GB
SSD: 256gb
HDD: 3TB x 2
MotherBoard: ASRock X79 Extreme6
VGA: quadro k4000
Can somebody help me to build these 2 PC in just 1 PC as possible ?

I have something similar that I just posted about - my system has both a GTX780 and a Quadro K4200 installed. Eric is right. They work, but the driver installation can be tricky.
Mine is a new build and I am trying to learn how the two cards work together. I expected better performance. I don't understand why setting CUDA acceleration to only the GeForce, when NVidia allows for both CUDA GPUs. I tried every combination with no difference in results. So, I will be following your thread to see what happens.

Nvidia Quadro K4000 vs Asus GTX 760. Which one better for AE and Pr ?

I have 2 Computers and planning to mix them up together as possible. I built a PC with quadro k4000 last year because I was graduated as 3D animator and i plan to work as Animator, plus I also have another PC with GTX 760. and now I'm currently working as Video Editor. so here are my questions:
- k4000 and gtx 760 which one would do better in AE and Pr ?
- I read some articles said: "quadro and gtx can group up together in one PC". is it really possible ? because some people said yes and some people said no and some people said yes but wont work together blah blah. I really want to know about it, because right now I already have these 2 GPU. and if YES. can you show me how to do it?
there are my both PC specs:
CPU: core i7 3820 3.66hz
RAM: 16GB
SSD 128gb
HDD 3TB
MotherBoard: Asus P9X79 PRO
VGA: asus GTX 760
Another one is:
CPU core i7-3930K 3.20GHz
RAM: 32GB
SSD: 256gb
HDD: 3TB x 2
MotherBoard: ASRock X79 Extreme6
VGA: quadro k4000
Can somebody help me to build these 2 PC in just 1 PC as possible ?

I have something similar that I just posted about - my system has both a GTX780 and a Quadro K4200 installed. Eric is right. They work, but the driver installation can be tricky.
Mine is a new build and I am trying to learn how the two cards work together. I expected better performance. I don't understand why setting CUDA acceleration to only the GeForce, when NVidia allows for both CUDA GPUs. I tried every combination with no difference in results. So, I will be following your thread to see what happens.

K410 with geforce gtx 760 not getting to BIOS

Hi,
I am trying to get a Zotac geforce gtx 760 to work in my Ideacentre K410. I am meeting all the stated requirements (power, cpu frequency, RAM, disk space). The power supply and Graphics card work in another machine, but in the Ideacentre K410, it will not get to BIOS during boot., when this graphics card is attached. I have been in contact with Zotac, have been through the tests they suggest, and in the end they suggest I try the motherboard / BIOS supplier.
Any Ideas ? I have already tried :
reseating RAM, testing RAM, reseating CPU with thermal paste, hoovering out dust (both sides of motherboard), reset CMOS, BIOS (Video Setup : Auto or PEG).
Any ideas of how to get this graphics card to work or am I asking for something that is not possible.
I have looked in the Hardware Maintenance Manual, and seen the list of graphics cards. But I am hoping to find a better one than those listed.
Thanks for any help you can offer.
Solved!
Go to Solution.

Using a free download of Windows 8.1 RTM, I installed on an empty disk, it created a GPT Boot partition with two boot loaders. After this 8.1 was installed, if I added the Zotac GTX 760, the machine was not able to boot to BIOS, but would eventually boot to window 8.1.
The machine was sold to me with WIndows 7.
I don't know whether I can configure the boot loader on the Win 8.1 disk to launch the Windows 7 on the original disk. or whether Windows 7 will recognise the graphics card.
Good Luck to anyone else !

MSI H97 GAMING 3 Intel H97 With 2GB Asus GTX 760 DirectCU

ust built my pc got it working with onboard grapics when i plug the dvi into the graphics card i get no display the HDD has a fresh install of windows 7 i haven't installed any drivers for the mobo or the GPU, im also using a fairly old VGA monitor and im using a VGA TO DVI connector.
specs
8GB (2x4GB) Corsair DDR3 Vengeance
Intel Core i7 4770K Quad Core
2GB Asus GTX 760 DirectCU II OC, 28 1
MSI H97 GAMING 3 Intel H97 (Socket 1150) DDR3 ATX Motherboard
This card has to be compatible with this board right? it can't be that issue?

Quote from: Nichrome on 27-October-14, 23:23:26
Hi,
Yes both are compatible.
What is your power supply?
Also did you try any different cable for video between GPU and TV/monitor? Maybe try different monitor too.
Hello ah, so the card and the MoBo are compatible? thats great!
PSU is Corsair CX750M 750W ATX 80+ Bronze PC Power Supply
also i will try a newer monitor that just has a DVI wire rather than using a converter

VBIOS with GOP/UEFI support for Geforce GTX 760 TWIN FROZR

Hi,
please provide a GOP/UEFI VBios for the GTX 760 TWIN FROZR
S/N: 602-V284-300B1309103551
NVFlash report:
NVIDIA Firmware Update Utility (Version 5.165)
Adapter: GeForce GTX 760 (10DE,1187,1462,2847) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 1112 bytes
IFR CRC32 : 8B7DF729
IFR Image Size : 1536 bytes
IFR Image CRC32 : 114B182D
IFR Subsystem ID : 1462-2847
Image Size : 99328 bytes
Version : 80.04.C4.00.30
~CRC32 : 1A372C64
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040010
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 760
Board ID : E115
PCI ID : 10DE-1187
Subsystem ID : 1462-2847
Hierarchy ID : Normal Board
Chip SKU : 225-0
Project : 2004-0010
CDP : N/A
Build Date : 06/04/13
Modification Date : 07/30/13
UEFI Support : No
UEFI Version : N/A
UEFI Variant Id : N/A
UEFI Signer(s) : Unsigned
Sign-On Message : GK104 P2004 SKU 0010 VGA BIOS (HWDIAG)
MSINV284MS.350
Thanks

Use the attached vbios.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Can apple release macbook pro with nvidia Geforce GTX 760

can you please add macbook pro a nvidia GTX 760 graphics card

No, we can't. We are users just like yourself
Seeing as how the nvidia GTX 760 is a graphics card for the PCIe bus structure which the MBP does not have, I think you chances of getting Apple to do that are right up there with the snowball in you know where.
Allan

GTX 760 2gb/oc problem with games

hi,
i cant play most games. They crash after a few seconds to minutes. AC IV, Splintercell,World of tanks...
They freeze, sometimes I get a blue screen of death.
If I run kombustor, then the same thing happens. After a few minutes, sometimes 5 minutes, it freezes, and the pc restarts.
I have next build:
MSI GTX 760 2gb/oc
ASUS P8Z77-V LE DDR3 SOCKET 1155 INTEL® Z77
INTEL CORE I5 3550 22NM 4 CORES 4 THREADS 3.3 ~ 3.7GHZ 6MB LGA 1155 BOXED
LITE-ON DVD±RW SATA ZWART 22X WRITER IHAS122-18
ANTEC SONATA III 500W
CORSAIR 8GB (2X4GB) 1600MHZ ZWART CML8GX3M2A1600C9
WESTERN DIGITAL 1000GB WD GREEN™ 64MB INTELLIPOWER WD10EZRX
I have reinstalled Windows 7, new drivers.
But the problem stays.
The store already switched my card, with an other, but the problem stays with this new card.
The computer runs fine,
just problems with gaming.
Any ideas on what's causing it? or suggestions to fix it?
Not enough power supply?
Thanks,
Kristof

Quote
According to Antec, the power supply has 2 rails with each 22 A, that makes 44? Is that correct?
No it is not. It's not possible to get the max by an addition. A split rail psu offers more than one rail which can be individually loaded up to the max amperage it is specified for. However that doesn't meant all rails can deliver the max simultanously. Earthwatts 500 included in that Sonata case should still have the specs I added. Add a pic of your psu's spec sticker to check it.

Will card nVidia geforce GTx 760 work with premiere pro?

Will card nVidia geforce GTx 760 work with premiere pro?

Yes, the GTX 760 will work nicely with Premiere on the PC. What version? With CS6, you may need to delete the "cuda_supported_cards.txt" file from the Adobe folder.
Thanks
Jeff Pulera
Safe Harbor Computers

GTX 760 compatible with h8 1420t?

My hp is an h8 1420t. It came with a 600w power supply and an Nvidia GTX 660. I want to upgrade to an Asus GTX 760 or 760 ti when it comes out. Will the graphics card fit in the case and work with the motherboard and power supply or will it not?

Hi,
The following links show specs of both cards:
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-660/specifications
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-760/specifications
They are same size (width, lenght & height). You need more power and connectors for the 760 and 600W can do the job nicely.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No video signal with STD bios gtx 760 hawk

Hi
I have some problem with my gtx 760 hawk, i can't boot on std bios the card run but no image " no video signal "...but the LN2 bios work correctly
No oc / no flash the std bios has worked 1 week and since 2 days nothing.
frequency of std bios was Gpu 1111Mhz / Memory 1502
fequency of Ln2 bios is Gpu 980Mhz / Memory 1502, bios version 80.04.C4.00.2D (P2004-0010)
Card :
N760 HAWK
S/N:602-V300-03SB1309034256
system Win 7 64
Driver 335.23 nvlddmkm 9.18.13.35.23
Before ask a rma, i would like to know if u can help me

i had a driver crash after switch bios...need reboot my pc, after a second try it's ok but gpu z 0.7.7 tell me ( Bios reading not supported on this device ) when i try to save the file and the frequency no change
i post the Ln2 bios if that can help you
https://mega.co.nz/#!nlgXWK6Z!xZ-jfV6LX3lMLCNyPUfdqcgZOqc8b3fLrKHpj10MBNc
If the std bios is corrompt can i flash it from ln2 bios and hope solve the problem ?

K410 with gtx 760

Similar Messages

Maybe you are looking for