K430 Bios "original bios recovery request"

Hi,
I have buyed k430 from mediaworld in Italy.
Last day i have do bios update with wrong bios update from lenovo site, now i only request the BIOS Original Application for restore "Only the bios" to the original K430 bios"!
Is not difficult, ps: in italy the Mediaworld cannot give me this driver, and i think the fast solution is to write to lenovo direcly because the solution is fast """"put BIOS Original application in download support"""" ...
My problem is: the new bios can only see 8 gb of ram .... and i have 16.. but after the wrong update have not chance to restore bios software "ps: i have used the recovery cd, but only recovery partition and os , not the bios"..
Please help me ! Thank you!
 ps: many people have speech about remove battery for 2/3 hour from motherboard and the bios restart to initial status, but don't work!"

many time for only have one file!
i think must do this to be fast and only put the link to the original bios file in support area for this product..
Where is the problem for do this?

Similar Messages

  • 870A-G54 - Bios recovery requested

    Hello, I have bought the mainboard 870A-G54 "second hand" from msi-shop.de and wanted to use it with a AMD Athlon II X4 640 CPU.
    On first start up of the new system it told me: "Bios recovery requested. Starting bios recovery" I downloaded 7599vh4.zip from the msi website as I thought it was the correct archive according to the cpu-list to a usb-stick, however the system was asking then explicitely for the file a7599ams.hg0. I downloaded that archive onto the usb stick.
    When starting the pc and doing the bios recovery the system is finding the file it wants but directly after then restarting with no effect or it turns me to a blank black screen.
    What shall I do now?

    Quote from: Stu on 29-July-12, 19:32:50
    What else is in your PC? >> Posting Guide <<
    1x 4gb Samsung DDR3-1333 PC3-10600 CL9 240 Pin 1333 MHz M378B5273DH0-CH9 Stick installed in the slot next the cpu
    Asus GeForce 8800 GT
    1x seagate Barracuda 120gb sata
    1x noname dvd/rw writer ide
    be quiet straight power e7 400w psu
    Quote from: Stu on 29-July-12, 19:32:50
    Try clearing the CMOS and then start again.
    Doesn't change anything.

  • 890FXA-GD70 BIOS Recovery Requested.

    Hello Forum
    I just put together a brand new system using the 890FXA-GD70 Motherboard and I have serious problems.
    Occasionally the system will freeze and crash.
    I will tell my story in order of how this began and all steps I have performed
    While in the bios I attempted to change my boot order.  As soon as I changed the device the bios froze.   I started the computer back up
    No screen input.
    Reset button does nothing.  System does nothing.
    After about 10 reboots with bios resetting and such  I eventually got a message
    “BIOS Recovery Requested”  insert USB…
    I tried to reboot a few times
    Sometimes I would get the bios recovery requested message
    Most times I would get nothing
    Eventually I inserted a CF card with a bios image on it
    Exact bios image on the MSI site  without changing the file name
    The system would scroll the BIOS recovery message over and over until it rebooted
    Said it disabled recovery just before it shut down
    The machine now boots fine up till I need to start windows and it does not
    So I restart and go through the whole problem over again and this time I restore the bios using the built in flash utility in the BIOS  I believe its MFLASH
    After the flash and a bios settings reset, windows boots but the whole problem starts over again after trying to do something intensive.
    So I re do everything as this is becoming normal procedure dealing with the system freezing in windows or in the bios (randomly in the bios  nothing specifically triggers it)
    (everything as in reboot the system till I get the recovery message  put the flash card in and wait till it disables recovery   go into bios and re-flash it)
    My last step was I flashed a fresh bios with MFLASH
    and then did a memory test with microsofts ram test software outside of windows.  That froze about 7% in and caused the system to beep non stop.
    And I’m back to start.  System does not boot, get the bios recovery message if I’m lucky.
    No over-clocking is setup  and I use optimal (Auto) settings.
    All problems occurs with either ram stick   either paired or alone
    Here is my equipment
    Motherboard : MSI 890FXA-GD70
    CPU : AMD|PH II X6 1100T 3.3G AM3 With OEM Heatsink and fan
    PSU : CORSAIR|CMPSU-650TX 650W
    RAM : 2Gx2|GSKILL F3-12800CL9D-4GB
    HD : WD Black SATA 2 1TB 7200RPM 32MB cache
    Video Card : GeForce 7950 512 mb with PCI-E power conencted
    OS : Windows 7 Pro 64  (legit fresh install)
    Other Details
    USB keyboard Merc Stealth , Microsoft USB Intili Mouse , Internal 5 Port USB cardreader,
    Liteon USB cdrom drive
    Monitor is a 52 inch LCD TV using DVI input on a 25 foot cord on max video card resolution when permited 1080
    Im guessing this is not a ram or cpu problem but the bios chip may be defective  and when the system loses the bios it freezes
    otherwise why would i get bios checksum errors and recovery prompts after each freeze.
    Please advise  this is brand new and i should not have something defective this soon.

    After spending 12-14 hours on the problem i can now safely give a detailed report of the problem
    Disregard what i said before as they were just symptoms of another problem
    It boots 100% stable if DIMM slots 1 2 and 3 are empty
    it does not matter the make or model of the ram in slot 4 but the system boots and works flawlessly.
    I ran extensive tests with prime 95 and memory tests.  It works flawlessly in this configuration.
    As soon as a stick of ram goes into any other slot  either singular or dual channel the board does a rapid boot cycle
    this constant power on and off if left too long corrupts the bios settings
    bios setting problem is rectified by putting one stick of ram into dimm 4 and letting it reset itself in a stable enviorment
    also while the system is stable i used the MSI software to check all the voltages and everything appeared normal
    However
    if i make the system boot with standard memory configuration  such as one in DIMM 1  or 1+2  i get odd voltage readings
    (extremely unstable if im lucky enough to get it to boot)
    the NB voltage quickly fluctuates between 1.15  and 1.7+ every min or so  like if there are micro spikes in voltage
    While this happens the 2 lights next to the slots indicating i believe the dram power phase blink
    But
    When i only put a ram stick into DIMM 4 only one light for the powerphase is lit and it is stable
    So this so far is not a corrupt BIOS chip to me but rather a symptom of another problem
    I have another CPU coming in the mail tommorow  I will test it out along with a few other boards
    a 1090T
    2 890fxa-gd70's and some others
    If i have a hardware problem it will surely be singled out
    I will find out what the problem is with this board and post my result.
    If anyone has any suggestions to make this board work please comment

  • Lenovo M58 (7360-AEG) - need original BIOS bin file

    Hello everybody!
    I think I have a BIOS problem with Thinkcentre M58.
    I try bios recovery procedure with .iso file, jumper, etc, but nothing happens.
    So I will try to programming bios chip with bios programmer. I found some bios files, but not the correct one.
    If somebody can help me with original bios .rom or .bin file, I will be very grateful.
    I save the present file and I see it's 4096KB, but files that I found are 2MB or less.
    Thans in advance.
    Happy weekend to all.

    No worries, Liken, as I already wrote, I was trying to flash 65cn13ww, and it failed for some reason.
    Being curious, I started the laptop again with F2 to check the current BIOS version, and what did I read: 65cn13ww!
    Yep, the same BIOS that I was trying to flash.
    I think Lenovo has a lot of explaining to do.
    But then again, when I follow some threads, I don't think Lenovo gives a sh...., seeing that most forum visitors don't get ANY answer or are still waiting for one.
    Shame on them and I'm very disappointed, particularly about Lenovo's attitude towards the loyal customers!

  • Need original BIOS for G530A

    Hello,
    I tried to connect my laptop to a tv for the first time but unfortunately there is a problem with the laptop's HDMI output.
    I purchased Lenovo G530A about 2 years ago. I updated its BIOS via a setup I downloaded through Lenovo web site. But recently I found out that my laptop is G530A instead of G530 which is the only model on driver list on Lenovo web site. And the big difference between two is that G530 doesn't have an HDMI output while G530A does and through reading a few forum posts it looks like the BIOS is the problem.
    I searched everywhere but I cannot find the original BIOS for model G530A. What can I do?

    you're saying you flashed g530's bios instead of g530a?
    if you succeed to flash it, i can say they are same models.
    you can check g530 download page.

  • Need Original BIOS for 5900Ultra

    I have an MSI NBOX nVidia GeForce FX5900 Ultra. I messed up the BIOS, and need a copy of the Original cuz i accidentally deleted the backup I made. The ony 5900U BIOS files I have found online or some Starforce version. I know that's not what I had before. Anybody know where I can get a copy of the original BIOS for my VGA card? Thanks in advance for any help you can give. Later!

    Hey, thanks for the BIOS file. It flashed fine, but now I realized you have a different card then me. Here is a picture of my card:
    http://www.gamers-depot.com/hardware/video_cards/msi/5900u/shot1.htm
    I don't think thats what you have cuz the BIOS still refers to the card as a Starforce, whatever the hell that is. Either way, thx for your help. Hopefully someone else can do the same if they have my same card. So, if anyone has this video card (MSI NBOX FX5900U 256MB), plz send me a copy of ur BIOS. Thx in advance, later!

  • Need original BIOS for Satellite C850-B237

    I was updating Toshiba Satellite C850-B237 insydeh20 bios, but after restarting laptop its bricked.
    Now I need Original bios (not updates) to boot from USB might work. To whom should I contact for oraiginal bios?

    I can imagine that Toshiba service provider in your country can help you with this. They must have access to Toshiba database and also access to all previous BIOS versions.

  • Equium A200-15i - need original BIOS

    I would be very very grateful if you could send me a link to the original bios for the EQUIUM A200-15i.
    Thanks in advance, Michael

    Hi
    On the Toshiba European driver page you will find always newest BIOS versions.
    Older BIOS versions are not downloadable and I think you will have to contact the ASP in your county to get such older BIOS.
    Regards

  • Dv6-2018ax Original BIOS for Windows Vista 32bit

    I have tried for hours to find the original BIOS for the DV6-2018AX (windows vista 32bit)  with no luck. I know there is no BIOS update... I am not interested in that, just the bios it came out of the factory with. If anyone could help me I would be much appreciated. This is for a USB flash... As I cannot recover the BIOS by normal means. Thanks.
    This question was solved.
    View Solution.

    All BIOS versions for your model are posted here:
    http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-83686-1&cc=us&dlc=en&lc=en&os=40...=
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Original Bios for 660 06SB and 060B

    Hi,
    I've bought 2 660 in the same shop, the same day and i got 1 with samsung ram (602-V287-06SB1301098348) and 1 with hynix ram (602-V287-060B1301094976)
    After blue screen when activation of the SLI, i've done a clean install of W7.
     Now, i've red blinking when playing a game with SLI. Without, all is ok.
    I've flashed both with a 660 tf oc bios; and the problem still occurs.
    Could you please send me the original bios for the 06SB and the 060B ? I've forgotten to save them... I know... I was too much pissed off by the blue screen...
    I'll sell one and I'll try to find a model with the same ram brand...
    Thanks

    attached latest legacy and hybrid vbioses for both cards,
    they are using the same vbioses.
    Quote
    I've bought 2 660 in the same shop, the same day and i got 1 with samsung ram (602-V287-06SB1301098348) and 1 with hynix ram (602-V287-060B1301094976)
    After blue screen when activation of the SLI, i've done a clean install of W7.
     Now, i've red blinking when playing a game with SLI. Without, all is ok.
    I've flashed both with a 660 tf oc bios; and the problem still occurs.
    Could you please send me the original bios for the 06SB and the 060B ? I've forgotten to save them... I know... I was too much pissed off by the blue screen...
    I'll sell one and I'll try to find a model with the same ram brand...
    read >>Posting Guide<<

  • How to backup original bios?

    hello guys, this might sound silly, but, i really have no clue.
    i got msi neo2-s bios (v1.0), and now, after the new beta bios release for msi neo2-s (v1.52), i want to flash it. but, before i do it, i want to backup my original bios, so, how can i backup my original bios?
    thanks for the help guys!!!

    thank u Tom.
    but, is there anybody else that can help me to tell how to backup my old bios, if i want to use the dos to flash my bios?
    i read in the readme that come with the bios, saying,
    "10.Execute the flash utility with the ROM file as a command line argument, with this example:
    awfl814b w6373nms.220
    If you wish to save the current bios you must specify the full path a:\filename. Specifying only a file name will save the bios to the RAMDRIVE which will be wiped after restarting the computer and the file will not be saved.
    a:\bios.old is an example of the correct way to save the bios."
    i think, wat he means is to backup the old bios, but still, i don't really get it. wat should i do if i wish to save the current bios? is it only copy?

  • Original BIOS needed for MSI FX5600 VTD256/VIVO

    I need the original BIOS or maybe an updated BIOS for my FX5600 VTD256/VIVO for i have installed the wrong BIOS and i need to replace it. Anybody who has it or know wheres to get the BIOS please tell me. Thanks for any help.

    Quote
    Originally posted by This_guy
    Ummm another stupid question. Does this NVflash work for PCI VGA card? Cause when you install the BIOS would it install over the PCI VGA card? Or is this just a stupid Q's and i shouldn't worry so hard? Thanks anyways.
    Nothing dumb about the question. Read this: http://www.google.co.nz/search?q=cache:tP64cLviX0oJ:www.ocfaq.com/forum_new/showthread.php%3Ft%3D72+nvflash+%22bad+BIOS%22&hl=en&lr=lang_en&ie=UTF-8
    (dang, I can't make a link out of the above url)
    Quote
    [EDIT] I forgot to mention that when i boot with the FX 5600 the monitor doesnt retrieve a signal and it goes into power save mode. Is this good or bad? Will i still be able to flash it?
    A bad thing.  But the card is still flashable no matter what the condition of the BIOS within.  For example, have a looksy here

  • Original Bios?

    Hi,
    I need MSI Geforce4MX460VTP
    Anyone know where I can find the original bios for my card?
    I need the original bios because I updated them and since then I can use the Winproducer/Wincoder software,it keeps crashing all the time,and with the original don't.
    The label on the chip reads: N8867MS100
    This Vga Card has Video-In Function
    I would Appreciate any help.
    Thanks
    My E-mail is: [email protected]

    1. Download a *.zip file from here.
    2. Format floppy using "make bootable" option.
    3. Copy the files from *.zip archive to floppy.
    4. Reboot PC with floppy inserted into drive (check in BIOS if the boot order points to floppy as the first boot device).
    5. When you get a command prompt "A:\" type: awfl833c w7030nms.110 , and press enter (example based on 1.1 BIOS).
    6. Follow the on-screen instructions (don't bother with backing-up your current BIOS, as there won't be enough space on floppy to do this).
    Hope this helps  

  • Equium P200D - revert to the original BIOS?

    Toshiba Tempo alerted me to the existence of an updated Bios for my notebook, but on installation the system froze and now it won't restart at all (blank screen) As part of the installation I was asked if I wanted to back up the existing Bios, which I did (under BIOS-BAK), but how can I now get into the system in order to access the back up and revert to the original Bios ?
    All suggestions gratefully received !

    Hi
    I agree with the user above. The old BIOS can only be reinstalled if the update went well.
    Now in your case you need professional help form an authorized service provider. The technicians have to reflash the ROM module.

  • Msi 8808(tnt2m64) original bios?

    I need tnt2 m64 version 1.0 bios.
    Anyone know where i can find the original bios from msi ??
    msi 8808 tnt2 m64 32mb version 1.0 without tv out.

    Because i flashed to the generic bios from nvidia when using the vga with msi 6163 pro motherboard,but now that i've changed to a gigabyte motherboard the video playback is not good.so i want to find out what the problem is,and because i tried everything else this seem to be a good try.
    when using at 2x speed on a 440bx msi6163pro the graphics card was ok .
    when using at 2x or 4x speed on a 815 ga60xt-a some scenes, in any mpeg on divx movie, instantly seem to play in fast forward(the playback seems to speed up)???
    winxp pro
    2x256/133 ram(512)
    msi 8808 using detonators 30.82
    celeron 1.1a
    gigabyte 60xt-a

Maybe you are looking for

  • Calling a function module from within a transformation routine

    I created a routine within a transformation and experience the following weird behavior now: When I call a function module within that routine, the load fails with the following error message: Exceptions in Substep: Rules When I click on the button n

  • Oracle 12c installation on Windows 7 not progressing

    My Oracle 12c Release 1 installation on my Windows 7 Professional 64 bit laptop seems to be stuck or hung or whatever you call it. After downloading file1 and file2 from OTN using wget, I copied the files to c:\oracle12c directory, renamed them so th

  • Can I partition an external drive into MSDO and MACOS extended and use under bootcamp ?

    I am interested in using Windows 8 alongside my OSX MAVERICK with the Bootcamp 5 solution. However, I am trying to save the space on my internal SSD . Can I partition my 4TB WD external drive into 3 parts like this : 1.5 TB dedicated for Time Machine

  • Skype is messing up my web design

    I do not appreciate Skype automatically adding in their icon to phone numbers on the websites I design and changing the color of the phone numbers.  In some cases it causes the phone number to wrap so it is very difficult to read and in other cases t

  • In ODSI 10gR3 fn:string-length() not pushing down to db (SR: 7714015.993)

    Under ALDSP 2.5, the following XQuery... where string-length($medacf) = 0 or $medacf = $acf/column_name ...used to generate this SQL: where ((? = 0) OR (? = t1."COLUMN_NAME")) However, under ODSI 10gR3, the where clause is missing. Here's the query p