K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences.  I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en​...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.  
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

Similar Messages

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp 1050 will not print more than one copy at a time

    hp 1050 will not print more than one copy at a time

    Hi,
    The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
    Please open the link below which illustrates the same.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en​...
    If the issue persists then, please perform the steps as shown below and check the copying function again.
    Steps to perform a reset.
    Press the Power button ( ) to turn off the product.
    NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.  
    Disconnect the power cord from the rear of the product.
    Disconnect the power cord from the electrical outlet.
    Wait 30 seconds.
    Reconnect the power cord to the electrical outlet.
    Reconnect the power cord to the rear of the product.
    Press the Power button ( ) to turn on the product.
    Connect the unit directly to a wall outlet.
    Check the copying function now.
    I hope this resolves the issue, if the error persists then please get back to us.

  • [SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

    I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
    No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
    Any ideas on what could be the problem here?
    Thanks,
    Kurz
    Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
    Print condition was set to All. Changing it to First solved the problem.

    Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

  • LaserJet 5000 will not print more than one copy at a time.

    We have recently moved our office.  A LaserJet 5000 which is used as an office printer is shared through one of the computers on the network in the exact same way it was more we moved.  But since the move it will not print multiple copies of the same document no matter how many copies the software tells the printer to print it will only print one copy then it stops.  Before the moved it worked fine.  If the software program such as Word told it to print 100 copies it printed 100 copies now one is the limit.   So if you want to printmore than one you have to hit print that many times.  It has 172 MB RAM.  Does anyone have any ideas of what might have happened????

    I have the same issue with a photosmart 2410xi. Did you ever get yours figured out?

  • My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    So now that you have repeated the same thing three times that doesn't make things any clearer at all.
    You are copying files from where to where?
    How are you attempting to copy files, software or click and drag?
    Any other detail would be helpful.
    Allan

  • HP Officejet Pro 8600 fax from computer will not fax more than one page without canceling job

    HP Officejet Pro 8600 MFP running on Windows 7 64 bit. I purchased this printer almost a month ago. The install was simple and straight forward with no apparent problems but when trying to fax from computer the program seems to be only able to fax one page faxes. Any multiple page faxes will show a message "spooling" for 10 to 15 seconds then it will cancel the entire fax. I have tried this in both wired and wireless modes with the same results. I have sent 30 page plus faxes from the printer without any problems, it is only the fax from computer that seems to have memory issues. Any solutions out there?

    Have you tried updating the firmware on the printer? 
    If not, here is a link to the most recent firmware:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101905-4&cc=us&dlc=en&lc=en...
    Try that and let me know if it helps to resolve your issue.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP Photosmart 5520 printer not printing more than 4 pages at a time.

    Hi,
    I have just purchased this printer - stoked about the duplex printing to save of paper etc. . . .
    However it prints maximum of 4 pages (word, pdf etc) at a time.  Kind of pointless having a wireless printer where you have to sit by the printer anyway & have to reprint a document about a million time.  And then sometimes it will print up to page 3 only,  so wasting paper.  Sometimes the printing stops mid page.
    I wont even begin to talk about how I have tried to print a photo,  3/4 of a 6*4 is the maximum that will print.
    Am kind of thinking its a waste of a $160.....NOT HAPPY.
    I have tried installing and reinstalling to no avail. . . what else can I try?

    Thanks for the advice,
    I read through the document and NOT COMFORTABLE not having virus scanning software installed on my computer.
    My two other printers work perfectly,  however,  lacking the wireless capability & duplexing and "printing from anywhere" I really want to move beyond them.
    The only step I hadn't preformed was a system restore,  which I will attempt now.  However how do I ensure I have up to date firmware?  I only have recently installed the printer using the website as recommended by the printer. . .
    I struggle to think of how the printer has capability to print from "anywhere"  it doesn't even tell you when connected that it fails at page x of x. . . . it just makes you think the whole thing is printed until you find on the printer it hasn't.
    Sigh!

  • How to print more than one page at a time

    I have not seen any place on the scanner where you can set the number of pages you want to print. I am using a hp diskjet 3050.
    thank you

    on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
    thanks for the reply

  • Print more than one page at a time

    I need help configuring my printer to permanently print 2 pages every time.

    on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
    thanks for the reply

  • Preview will not scan more than two pages at a time....

    My Preview seems to have changed recently.  I primarily use it to view pdf's and jpg's, but also to scan documents and drawings via my home and office networks. Since I have my own company, I have set up identical printer/scanners at home and at the office (Brother MFC 6890CDW). Since using this method of scanning a couple of years ago it has been a great tool for me. Recently the Preview has been binding up ("not responding") after only two sheets are scanned.  At first I thought it was a problem for the particular printer/scanner, but the same thing happened whether I was home or in the office. So now if I have multiple scans I need to do them individually and then combine the pdf's later in Acrobat.
    Do I need to re-install Preview?   If so, do I have to purchase Preview again?  How do I do that?  Is there an online update or software fix instead? Is this another problem? like a computer memory or scratch disk problem?

    The only way I could make Reader show 4 pages was to
    set View to 2 pages scrolling
    zoom out to display four pages:
    But for me that it to small to read anything...

  • Finder will not copy more than one file at a time to another folder

    The Finder can’t complete the operation because some data in “EMAP_14_map.pdf” can’t be read or written.
    (Error code -36)

    The startup drive is failing, or there is some other internal hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • P1006 - networked with XP and VIsta-64 not printing more than 2 pages

    Hello - I have a dilemma with my HP P1006.  I have the printer directly plugged in (USB) with my XP (32bit) PC.  I have a Vista-64 PC networked with it.  Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless).  My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC?  I CAN print more than two pages with items opened in the XP-32.
    Things I've done:
    1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
    2 - marked the printer as "sharing" on the XP-32.
    3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
    Things I perplexed about:
    1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
    2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
    3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC?  Why?
    Any thoughts on this situation?  Any suggestions are greatly appreciate.
    Thank you - Jane.

    Hi!
    I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
    Thanks

  • Problem with printing more than one page (ghostscript broken?)

    Hello,
    since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted.  As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
    root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
    -rw-r--r-- 1 root root  9906288 21. Mär 2010  /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    -rw-r--r-- 1 root root 11402624  8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
    [root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
    Löse Abhängigkeiten auf...
    Suche nach Zwischen-Konflikten...
    Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
    :: libspectre: benötigt ghostscript>=9.00
    [root@arch32 dieter]#
    Anyone else having printing problems or a solution for my problem?
    Thanks, Dieter

    This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
    So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

  • Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

    Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
    I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
    Please help me!

    We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

Maybe you are looking for