K7 master reporting 1.33Ghz as 1Ghz

My 6341 is reporting my cpu as 1Ghz when it should be a 1.33Ghz. I manually force a 133 bus and a 10 multiplier but the system ran like crap. Applications freeze and wont open etc. Used to work fine now it dosen't. Any Ideas?
-ToK

Nope, I dont have any safe mode jumpers. This happened when I changed processors from this Athlon to a Duron to check whether I had a bad Athlon or not. It was fine but will not default to a 1.33 anymore. I change the settings to 100Mhz and 13 Multiplier. Seems to be working, I'll let yas know.
-ToK

Similar Messages

Dynamically select detail report for a master report link item or button?

I'm still new to APEX, so apologies if this sounds like a stupid question, but so far I can't find anything online about how to do the following.
I have a simple report, and I want to be able to drill down from here to a detail report via a link item (or a button) in each row. The problem is that the specific detail report to use depends on a combination of values in the parent record.
So if I have a parent record in the master report with values for columns 1/2/3 of A/B/C, I would drill down to a detail report against table X. If my parent record has values of D/E/F, I might drill down to a different detail report against table Y.
I can build the individual reports easily enough, and I can set up a link item in the master report to drill down to a hard-coded detail report page. I can even generate the name (alias) of the relevant target report as an extra non-DB item in each row of the parent report. But I can't figure out how to allow each row in the parent report to actually link to a different detail report dynamically, depending on the contents of the parent row.
Can anybody suggest an easy way to do this, or point me towards an online resource that would explain how to do this (preferably in basic terms that this APEX-newbie can understand)?
Thanks for your help!

Hi,
When you say "Detail report" do you just mean a normal report of the child records for the selected master record or a tabular form style "Details report"?
Using different reports on a page would, typically, depend on the value in a hidden page item - for example, P1_REPORT_TYPE. Your link could pass an appropriate value into this item and the second page would then use this as a Condition for each of the report regions - each region being conditionally displayed when the hidden item is a specific value.
Andy

Passing the values from subreport to master report in JasperReports

Hi All,
I want to pass the values from subreport to master report, but my subreport is without any query.
Please help me in this regard. its urgent.
Thanks & Regards
Kris

Hi,
Below link may help you
http://jasperreports.sourceforge.net/tips.tricks.html#returnvalues
regards
MJ

How to call a detail report from a master report in 11g?

How to call a detail report from a amster report in 11g?
We have a requirement to call a detail report based on the invoice id that will parsed from the master report in OBIEE 11g. Any ideas sugegstions will be greatly appreciated.
Thanks,
Edited by: user8957415 on Jul 31, 2012 9:04 AM

Check these links
http://gerardnico.com/wiki/dat/obiee/master_detail
http://prasadmadhasi.com/2011/11/13/master-detail-event-in-obiee-11g-and-pass-multiple-events-to-one-detail-report/
Hope these helps

Vendor Master report with address, telephone number & email ID

Dear All,
Kindly provide to me T Code for Vendor master report along with vendor address,Telephone number & email ID.
Krajesh

Hi Rajesh .... in case customer require specific information, you can also try using sap queries (trust me it is not as difficult as it sounds but the results are just great ;-):
queries
Table SZA1_D0100 have the following fields
SMTP_ADDR (E-mail Address) ; TEL_NUMBER ; MOB_NUMBER ; FAX_NUMBER
For address check table ADDR1_DATA
Common join should be Vendor among these 2 tables
Hope this helps !!!
Edited by: m_n_novice on Aug 7, 2009 11:08 AM

Customer Master Report needed for jurisdiction, tax code, and district

I am trying to pull a customer master report and need to include the following fields:
Name (NAME1)
Account (KUNNR)
Jurisdiction ( TAXJURCODE)
Tax Code (TAXKD)
District, which is County for US addresses (CITY2)
I haven't seen a report with CITY2 and have tried S_ALR_87012180 or opening KNA1, KNVI, etc.
Any ideas?
Thanks,
Michelle

No there is not such report or transaction.
You may look at tables KNA1 + ADRC.
In table KNA1 there are fields ORT01, ORT02, COUNC and CITYC that could help
Otherwise you must link KNA1 and ADRC with field KNA1-ADRNR = ADRC-ADDRNUMBER
Sorry
BR
Alain

Customer master report and printing

hi
pls advice any customer master report and how to print the record. thanks

Hi,
Have you tried with Report: MCTA?
You may add more key figures by F6.
Also, you may check report: FBL5N
You may change Layout by Ctrl+F8.
Hope this may help you.
Best Regards,
Amit

How can we pass the master report value in to detail report

Hi All,
My question is how can I pass the master report value in to detail (Child) report filter?
I mean I have one master report if I click on employee name then I have to pass the employee id in to details report filter. Then detail report will display data for that particular employee.
How can I achieve this one in OBIEE?
Please help me to resolve this issue. Thanks in advance for your time and support.

In that case, you should look at using Go Url. In your column formula for the employee name, create a hyperlink to the detail report and pass the employee id.
Take a look at this post: Re: Dyanmic display of the Image Link URL
Thanks!

Master Report problem with PL/SQL

Hi Intelligent ones :)
Can anyone help?
I am trying to generate a Master report by generating a report based on a SQL query. The SQL query generates the detail of the report and the Main part of the report is generated using PL/SQL in "after displaying the header". See my PL/SQL below:
DECLARE
v_cloneid Clone.CloneID%TYPE;
BEGIN
htp.p('1: v_cloneid is:');
htp.p(v_cloneid);
SELECT Clone.CloneID
INTO v_cloneid
FROM ClonesDB.Clone;
htp.p(v_cloneid);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
htp.p('No data Error');
WHEN OTHERS
THEN
htp.p('Error Detected');
htp.p('Exception: v_cloneid is:');
htp.p(v_cloneid);
END;
Every time I try to run my report an exception (When others) is generated. In my attempt to debugg my code I have discovered that the correct value is read into the v_cloneid variable. I can print this out within the exception but not before this!!
Also to generate a report for each cloneID entry I assume I will need to use a loop?
Please help...I'm just learning!!
Kirsteen
null

I think you should post it -
Forms
Regards.
Satyaki De.

Master Report on persons in R12

Hi All,
I am working in R12 implementation project. I need to kno, is there any responsibility , standard report available for following reuiqrement:
# Master Report to print the required details like
1) Person Details
2) Addresses
3)Phones
4)Salary
Kindly reple me for above requirement. Your help will be greatly appreciated.
Regards,
Basaw

Hi All,
I need the report which can give personnel details, address, contacts and salary information for all the employees.
I found the report like Worker Summry Report and Full Person Details Report which give the information for single employee by passing parameters like Effective date and Employee name.
But i need to know the report which gives me the information for all employees in the oraganization or organization hierarchy.
Kindly reply me for the same
Thank You
Basaw

Opening child report through master report using hyperlink

HI Experts,
I have a requirement where, I need to create a child report which will open through a master report using hyperlink.
I have to use BIP desktop (MS word) and need to create a RTF template using XML file.
Can you please guide me, how I can achieve this?
Regards,
Suhasini
Edited by: 942451 on Jun 28, 2012 9:48 PM

Take a look at this blog post: http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
Thanks,
Bipuser

How can i create Standard master Report with Client standards .

HI Gurus,
We are creating somany reports. for each time we have to redesign same work.. My client has some standards every report should looks same. I mean Logo, Client Name, Color of the bar, font size, Style, Format, back ground color etc......
Is there any way we can create one master report with all my client standards. Then developers no need to do same work again and again in each and every report.
Please help me on this issue it will help lot of our developers time.
Thanks in Advance for your help

hi,
even your question is really large and generic,
a very good start is this blog,
http://obiee101.blogspot.com/2008/09/obiee-setting-up-compagny-custom-skin.html
also check from the same blog,all the threads related with skin.
The main idea is to have configured all the views...images,logos,colors...and so on...
As far as presentation of "letters" / "numbers" at reports , in the configuration of each column,you can select to be this style default for the whole scenario..(i,e, always calendar.date column has 11-verdana-bold size...and so...)
Your most valuable tool is firebug,with this you can change the css....(more details in blog...)
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Discoverer Master Reports

Hi,
Using Oracle Discoverer 10.1.2 (Plus and Viewer) is it possible to create "Master reports" where sections of the output can be split up and distributed to different groups within an organisation (ie one section of the report has data for Finance dept. and other section of the report has data for HR dept.)?
Is it possible to automate the splitting and delivery of the master report output using scheduled workbooks and sending the output via email?
Kind Regards,
Leigh.

John Hagel:
How can a cross-tab report be used as master-detail?
If the row items are treated as detail items, where would the master items be? There should be multiple detail records per a single master record? How can this be possible in a cross tab report?
Thanks.

Vendor / Customer Master Report

Dear Experts,
Would you please inform me if there is any standard report in SAP which generates master for all the customer / vendors created, having below mentioned fields:
SAP Code
Vendor / Customer Name
Address
Contact Details
Telephone no
Mobile No
E-Mail id
Company Code
Date of code creation
Nature of vendor / customer
Date of Birth / Incorporation
PAN No.
TAN No.
Service Tax Registration No
Bank Details
Tax code attached to them
Thanks & Regards,
Ripon Paul

dear friend,
please try S_ALR_87012179 (customer list) and S_ALR_87012086 (vendor list)
you would also try to build sap queries based on KNA1 , LFA1 tables
good luck!

Using Summary Fields from Detail to Master Report

Hello guys, I have a Report with Master-Detail Relationship where Detail have a Summary Field named TOTAL_PRODUCT that sum the total of products in a sell. The unique function of detail report is sum the total of products in a sell, in report we have this structure:
ID -
DATE OF SELL -
VENDOR NAME -
CUSTOMER NAME -
TOTAL OF PRODUCTS
This Field in report TOTAL OF PRODUCTS only can be calculated with Detail Table, how can i do it ?

I'll have a exemple with some data :
ID/     DATE OF SELL/     VENDOR NAME/     CUSTOMER NAME/      TOTAL OF PRODUCTS
1/     23/08/2011/             JONH MARK/              MAX FOX/              100
2/     31/08/2011/             JONH MARK/              CRYSTIE LABORY/ 20
This Column named TOTAL OF PRODUCTS only be calculated with the Detail information, i need to sum all of products in detail table, but how can i do it in Crystal ?
Edited by: Ronaldo Lanhellas on Aug 31, 2011 4:22 PM

K7 master reporting 1.33Ghz as 1Ghz

Similar Messages

Maybe you are looking for