K7D Master Problem
Hello all, I just purchased a K7D Master and 2 MP1800s. I cannot get the system to boot. The speaker emits a never ending click click click click and the D-LED shows all red, which the manual states, "The D-LED will hang here if the processor is damaged or not installed properly." I have tried both cpus by themselves in the primary cpu socket, and an XP 2100+ I had sitting here. All three processors work in other systems. I've cleared the CMOS multiple times, tried two different power supplies (Antec 350w, and a Thermaltake 480w), and in and out of a case. Any other things I should try?
Thanks,
Oldbenwa
Hi,
Probably a stupid suggestion but:
Quote
The speaker emits a never ending click click click click
Sounds like a stuck keyboard key! Dodgy keyboard perhaps! Well I'll give myself 10/10 for effort and 0/10 for helpfulness!
Sorry that's all I could think of!
Hi, I don't know much of your server board, but does it have a FSB jumper (SAFE/USER)? If it does, set to SAFE before clearing CMOS! Make sure you also completely Isolated (unplug it) from the mains supply while clearing!
Axel
Similar Messages
-
Problems to get run a 7800GS on my K7D Master -L - HELP -
hi,
i having problems to run my new 7800GS on my K7D Master -L
during driver installation(in the middle of) on windows XP pro the system turns into black screen.
My System:
2 Athlon MP 2800+
2x 512 MB Samsung
Powersupply: +3.3V (38A), +5V (44A), +12V (20A) (enermax EG465P-VE)
only one harddisk
i removed all cards - no solution
i try to run with only one CPU - no solution
i´m really on fire with this problem
has anybody any idea how to fix this ?
i also loaded optimized bios config... clear cmos... i do anything but this card would not run
and the card supports AGP 4x
before i try the msi 7800GS same problem
now i have the club 3D 7800GS ... same problem
i dont think thats the pwoersupply... what did u think ? but it has enough power... or ?
please help ! thanks
and... bios is 1.91 (latest stable of course)
...and try 4 different forceware drivers
thanksCool but the temps here and probably where you live (I checked your IP, we live 80km's apart ) are way lower then the last couple of day's.
So at lower temps, the PSU can deliver more power.
I hope it will still work when the hot temps are comming back. -
MOVED: K7D Master Sound Problems
This topic has been moved to Server/workstation.
K7D Master Sound Problems...AC 97 is common hardware so it should be easy to find a driver...maybe here?..
...I'm not familiar with that OS, but have you done all the updates?.. -
MOVED: I have problems with my K7D MAster board
This topic has been moved to Server/workstation.
I have problems with my K7D MAster boardJuansebastianco,
you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on? -
I have problems with my K7D MAster board
I just have gotten hands on a new K7D master mobo (yeah i know it is not the newest board on the market but i had the cpus so why not). I have just installed Windows 2000 server on the machine. And everything was working fine until I was going to transfer some very large files over to my other computer (DVD isos 4,5 GB) and then the machine just locks up. And I have to reset it to get it up and running again.
I have changed the network adapter and reinstalled the whole system, but it doesnt help.
When i look under the device manager there is an unknown device called "unknown pci bridge" it seems its the AMD 768 chipset.
But here comes the real problem, I cant instal any AMD drivers?? When i try to instal the EIDE driver, the 768 chipset driver or any of the AMD drivers its just saying that there is no AMD components found.... And the driver wont instal.
Anyone heard of this before?
MSI K7D Master
2 X MP1900 CPUs
Adaptec 29160 scsi board
2 X Seagate U160 18GB SCSI disks
1 X Seagate 200GB IDE disk
1 X Samsung 250GB IDE disk
1,5 GB ram Crucial and Apacer
Edit: Problem solved, seems that I must have an PS2 mouse plugged in
When I tried copying with the PS2 mouse it all works
I found this topic in www.2cpu.com
http://forums.2cpu.com/showthread.php?s=e88a5eb9c52b6bf96d532faf85d626cf&threadid=42709&highlight=K7D+master+lock
Speaking of strange problem... lolJuansebastianco,
you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on? -
K7D Master-L graphics problem: multiple display adapters/no winxp star
Hiya,
I just recently bought a new K7D Master-L and I've had a few problems with it. Other than these issues the board has been great, but this is getting pretty annoying and I can't seem to fix it, so I'm posting here for advice/help/solutions.
System Specs: I have two AthlonMP 1900+ and 786MB Corsair RAM (registered PC2100, 512MB in slot 1, 256MB in slot 2). I have a WD400JB (40GB ATA100 drive with 8MB buffer) and a generic IDE CD/DVD-ROM. I have an ATI Radeon 9700 Pro AGP card running at 4x.
When I first installed the motherboard I tried to load Windoze XP on it (actually I first used Linux but had ...driver problems). Anyway XP seemed to install fine, but upon reboot, the system would get to the "progress bar"/"OS loading" screen (the small blue bar that goes back and forth) and the bar would get stuck exactly 2 "bars" from where it started--every time. I could boot into safe mode, but nothing seemed screwy. Doign the command-line boot (I think) where it shows the drivers it is loading, it got to the "agpgart" file then stopped, maybe this was the problem. I gave up after a dozen reboots or so, trying various things, and installed Windows 2000+SP3.
Win2K installed fine, and after installing the drivers on MSI's site for northbridge, southbridge, audio, and lan, and installing ATI's latest Catalyst 3.4 drivers (I also tried 3.2), device manager had no more problems, save one.
The problem is that there are two display adapters listed: "RADEON 9700" and "RADEON 9700 (Secondary)". There were two adapters listed before I installed the drivers, called something like "Display Adapter" and "Display Adapter (VGA compatible)". In Properties it says "PCI Slot 4 (PCI bus 1, device 5, function 0)", is this normal for AGP cards? Here is a screenshot (I disabled one to see if that helped my settings-loss problem, but it doesn't):
[ALIGN=center][/ALIGN]
Whats worse is that the display settings don't seem to stick around across reboots--it always reverts to the default settings of 640x480x16--which is extremely annoying. These problems exist regardless of whether I have a Service Pack installed (currently I'm running on a fresh Win2K install with no updates and having the same issues). I've tried multiple drivers for the card and no change, I've tried with/without the updated chipset drivers, and I've had this same setup work on my previous motherboard (Tyan Tiger MP) without seeing multiple display adapters.
Any ideas? Or is there something that might fix my WinXP startup freeze? If so I could reinstall WinXP and see if that has the same multiple adapter problem...
Thanks for any advice.
JoshWell my system just booted into 640x480x16, so it appears those registry changes didn't fix the issue. The registry settings were simply changed back to 640x480x16 for some reason. I haven't reinstalled the motherboard drivers, but I gathered them all up and I'll try this later today. Here are the latest drivers I found, all from MSI's site:
Onboard AC97 Codec Driver
Support model: K7D Master (MS-6501)
Description: AMD AC97 Codec Driver version 10B
Date: 2002-8-20
http://download.msi.com.tw/support/dvr_exe/AC97_Codec.exe>
Intel 10/100 LAN device driver for Win2000
Support model: MS-6508...MS-6501...MS-9202
Description: A formal release from Intel.
For integrated Intel 10/100 Lan.
Date: 2003-2-25
http://download.msi.com.tw/support/dvr_exe/intel_Win2000_for_100.exe>
AMD 762 Driver
Support model: K7D Master (MS-6501)
Description: - WHQL Certified Driver
- Added support for Windows XP
- Changed settings to only use auto-compensation for the AMD-762 (MP) Northbridge(2000/XP).
Date: 2002-8-20
http://download.msi.com.tw/support/dvr_exe/MINIPORT_533.EXE>
AMD 768 Driver
Support model: K7D Master (MS-6501)
Description: - WHQL Certified Driver
Date: 2002-8-20
http://download.msi.com.tw/support/dvr_exe/POWMGMT_122S.EXE>
AMD EIDE Driver
Support model: K7D Master (MS-6501)
Description: - WHQL-Certified for Windows 2000/XP ONLY. Version 1.43s
Date: 2002-8-20
http://download.msi.com.tw/support/dvr_exe/EIDE_143S.EXE>
Microsoft Windows® 2000 Patch for AGP Applications on AMD platforms
Support model: K7D Master (MS-6501)
Description: This is a registry file for Windows 2000
Date: 2002-8-20
http://download.msi.com.tw/support/dvr_exe/largePageMinimum.reg>
Award® BIOS I have 1.6 (?)
File Size: 234KB
Version: 1.82
Update date: 2003-5-12
Update Description: Support AMD MP 2800+ in correspondance with AMD web site recommendation
http://download.msi.com.tw/support/bos_exe/6501v182.exe>
*** NOT USED: OLD DATE AND WRONG CHIPSET NUMBER ***
Onboard NIC Driver
Support model K7D Master (MS-6501)
Description
-Intel GD82559ER LAN chipset driver
Date 2002-8-20
http://download.msi.com.tw/support/dvr_exe/E100CE.exe>
We shall see if this fixes the multiple adapter problem. As far as the display settings problem, I don't know that the deal is. It works fine on other motherboards with the same hardware and drivers, so it must be something with the K7D, Windows, and ATI interaction.
Josh
P.S.: There is a bug with this forum software and apostrohpies. Every time you preview your post it inserts escape characters ("\") before apostrphies, and also inserts escape characters for these escape characters, so quickly you have something like "\\\\\\\'" where you want "'". -
K7D Master-L with LAN problems
I've just completed construction of my new K7D Master-L based machine and am running into LAN problems. The first K7D Master-L I received had a bad IDE controller on it, and now the replacement board has intermittent LAN issues.
WinXP Pro installed fine, and I was able to install the LAN driver from the MSI CD and get things up and running fine. After about 20 minutes or so, the LAN connection drops out and then comes back a few minutes later. This cycle repeats over and over. There are no duplicate IP addresses on the network, there are no errors in the XP system log, and all of the other systems on the network continue to work fine during these down periods.
I checked on the MSI website, and there are no drivers available for the Intel 82551QM lan controller that is on the K7D Master-L board. Does anyone know where I can get an updated driver to try? These types of problems are most frustrating to debug.
Thanks,
NormJust an update to this:
The problem is definately the onboard LAN controller. I've tried a Netgear card as well as a real PCI based Intel Pro 100 card and both are working great. When I take the PCI cards out and try to use the onboard LAN, I still get intermittent outages.
Very strange. If any MSI engineers are listening, I'd love to hear your opinions. According to the OS, there are no IRQ, memory, or other conflicts that might be to blame.
Norm -
Problems with Promise SX6000 and MSI K7D Master
There is a problem with Promise SuperTrack SX6000 controller and motheboard MSI K7D Master.
We use most fresh bios for both products - version 1.5 for motheboard and build 77 for controller.
With previous controller's bios version it can't be initialize and now after initialisation the bios of controller does not show up.
It seems to be like one of problems wich are described in controller's manual, but this problem can't be decided by user's hand, but only new version of bios, we think.
What you can help ?No ways ?
-
MSI K7D Master L - CRC Problem
Hey gang.
I've been having some CRC troubles with my MSI K7D Master L. On most occasions, I cannot perform an install from either of the cd drives--eventually a CRC error will pop up. In addition, data on the hard disks (i.e. registry settings) dissapear or are corrupted. Which sucks. ...and you can imagine how my slightly corrupted windows install is performing :(. ?(
Here's my specs:
-AMD MB 2800+ Barton (Only one CPU installed right now)
-1024 mb of Kensington ram
-ATI 9700 Pro
-Bios Version 1.3 (latest bios for Master L)
-Enermax 431watt power supply
-Creative Audigy Sound card (onboard sound disabled)
Just for reference, I've ran all the diagnostics (memtest86, and that IBM hard disk checker) and no problems show up. Only the motherboard and processor are new... all of the components, cables, drives, etc. were working well before I poped in the new MB. Of course, I started fresh with a clean formatted drive for my windows install.
I've heard that my Enermax 431 is about a 10 on the blows-O-meter. Could this be the problem? I realize that my new AMD 2800MP is prolly pulling out a bit more juice than before.
I love this motherboard, and I know that CRC errors are pretty rare on the K7D (cough, unlike some other MBs), I'd hate to have to RMA it.
Thanks in advance ,
JonnyLongTorsoReplaced the Enermax 431 supply with an Antec 550 watt unit. Still getting the errors.
Any ideas? -
K7D Master-L (6501) Rev 1.1
2x AMD 2100+
2x512 Infineon ECC Registered CL2 PC266
Enermax 460W PSU
Leadtek GF4 Ti4600
CT Audigy 2
Highpoint Rocket133 IDE Controller
Now, my on-board USB slots don't work, nor do the USB slots in front of my case (they're hooked up of course).
Included with the board was a USB 2.0 card, which actually works, but according to my manual, my on-board ports should work, too..
I already emailed MSI tech support, however that was 2 weeks ago and they haven't since gotten back to me.Quote
Originally posted by xerxes
AMD had some problems with one of there dual cpu chipsets the usb will never work. (not sure what the chipset is called). Thats why they gave you a PCI USB card.
I know, but I got a fixed version which is supposed to have working USB & a USB 2.0 compatible case ! -
K7D Master + 4GB RAM- New problem
Hi this is my setup:
Dual AMD Athlon MP-A, 2133 MHz (8 x 267) 2800+ Barton A2
Motherboard Properties
Motherboard ID 10/09/2003-AMD762-W83627-6A6S7M49C-00
Motherboard Name MSI K7D Master (MS-6501) (bios v. 1.91- newest)
Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s
Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s
Chipset Bus Properties
Bus Type PCI
Bus Width 32-bit
Real Clock 33 MHz
Effective Clock 33 MHz
Bandwidth 133 MB/s
My problem is that the motherbord can see only 3670016k RAM with all 4 dimms plugged
I have checked by changing setup several times that all modules and slots are working.
I addictionally checked SPD, and found that all modulles are visible as 1024.
I use Transcend TS128MDR72V6A
Memory Module Properties form (SPD)
Module Name Transcend TS128MDR72V6A
Serial Number 00011DA2h
Module Size 1024 MB (2 rows, 4 banks)
Module Type Registered
Memory Type DDR SDRAM
Memory Speed PC2100 (133 MHz)
Module Width 72 bit
Module Voltage SSTL 2.5
Error Detection Method ECC
Refresh Rate Reduced (7.8 us), Self-Refresh
Highest CAS Latency 2.5 (7.5 ns @ 133 MHz)
2nd Highest CAS Latency 2.0 (10.0 ns @ 100 MHz)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Supported
On-Card PLL (Clock) Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
I have also foud that info from chipset is wery strange- showing some non existing 5-th memory slot.
This is the info
Chipset Properties
Motherboard Chipset AMD-760MPX
CAS Latency 2.5T
RAS To CAS Delay 3T
RAS Precharge 3T
RAS Active Time 6T
Memory Slots
DRAM Slot #1 1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #2 1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #3 1024 MB (Registered ECC DDR SDRAM)
DRAM Slot #4 512 MB (Registered ECC DDR SDRAM)
DRAM Slot #5 256 MB (Registered ECC DDR SDRAM)
There should be 1024 MB module indicated in slot #4 - but insted there is some s....
What can be wrong? I'm getting mad cause This Transcend modules cost me a fortune - and i bought it cause i really need it... all four!!!This is from the Tyan mainboard web site
http://www.tyan.com/products/html/tigermpx_spec.html
* Note: The AMD-760 MPX requires a portion of memory to be reserved for PCI devices. Allocation for these devices is dependent on the number of PCI devices installed, and option ROM for each device. Common configurations will see 3.5GB to 3.8GB of available memory.
Several brands of mainboard say this unless they support more than 4GB.
MSI does not mention this on their web site or in the manual.
I suspect the only solution is to get a mainboard that supports 6GB or more. -
I have two new systems I put together, with the K7D Master board, and two AMD MP 2000+ on each board. Video card Quadro 750 xgl, and 512m pc2700 ram. I have pulled everything else out and the problem persists.
My problem after a fresh install of Win2k and both systmes runs great. I leave it on and during random intervals the systems will reboot it themselves. Both systems do the exact same thing, usually about once a day. They appear to run fine tempature wise, and both have the 1.6 bios update from MSI site. The doesnt appear to be any set time that it happens. Looking through the event log doesn't bring up anything useful, and I dont have anything loaded other than Win2k service pack 2, and all updated drivers, and security updates.
Any help??Main Memory
- Supports eight memory banks using four184-pin DDR DIMM
- Supports DDR SDRAM DIMM
- Supports a maximum memory size of 4GB (registered DDR
only)
is it registered ram not normal
http://www.memtest86.com if it is to check it
http://www.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=73&MODEL=MS-6501 -
Hi,
I just recently bought a second-hand MSI K7D Master-L to upgrade
my aging ASUS mobo. I used to have ASUS A7V with a 900mhz AMD Athlon
processor on it with Windows XP Pro installed.
Now the problem is that I just threw in the newer K7D Master with
one processor, AMD Duron 1600 mhz. I did not do a fresh winxp install,
although I wonder if it would have helped.
The OS won't boot - it just reaches the startup screen (the one that
comes just before login prompt) and then reboots. Every time it does
that in the exact same point.
I tried also to boot with Knoppix 3.6 Live CD and it hangs. I tried noapic
option and the same problem. Another Live Linux distro (can't remember
the name, included in the Ultimate Boot CD) shows: "apic error in cpu0" endlessly,
and hangs. Tried to run cpu test, but it hangs - the same error.
The bios version is 1.3, but I will have it updated to newest version within
some days (I screwed up the bios update ) by a computer shop.
Suggestions, anyone?
Regards: Juhareinstall windows
but try this first: How to repair your Windows installation
BTW, did you mean K7T Master? i can't find a K7D Master. The CPU Support list for K7T Master indicates that your CPU is not supported anyway -
MOVED: K7D Master Video problem
This topic has been moved to Server/workstation.
K7D Master Video problemQuote from: Liquidman.com on 13-December-05, 09:40:12
Well let's see, The k7D is a dual mobo and will work with only a limited number of cards, after trying a few I finally settled on an nvidia Direct X 9.something (there is no name on the card, and I have 6 video card box's) I put in a a Wildcat 5110 I had laying around, but the driver doesn't support Max 8, or even 7, can't use software/Heidi. You just see the desktop through the viewports. This mobo uses an AGP pro slot, I don't even know if anyone's makeing these anymore.
Are you running linux ? If so i suggest a Nvidia card. -
K7D Master L + Leadtek TI4600 Problem
Hello,
My K7D Master L Mainboard could not boot ( no video ) with Leadtek TI4600 ( AGP 4x ) Graphics Card.
Boots fine with other cards ( ex radeon 8500, radeon 9800, -Gforce 4400- )
Any ideas why ?
MSI k7d master L
2*2600MP
2*512 Kingston ECC REG 266mhz
2*IBM 40GB
SB Audıgy
DVD RW
CD ROM
Thermaltake 420W PSU PurepowerDoes it need a power connection at the back some cards require an Aux power supply
if not maybe a faulty card
Maybe you are looking for
-
Why can't I use adobe flash player to watch Utube vedios?
Every time I try to download a vedio I get a message saying apple will not permit adobe flash player. what alternative do I have to allow me to watch or access Utube vedios?
-
Safari is not working and siri only works with the phone not internet related questions.
I have an Iphone 5 and for about 8 months it worked find, then somewhere along the line I think about the time I upgraded to the latest OS, Safari stopped working. That is when I hit a link from email or open safari I get the browser window but noth
-
Burning to audio cd? I downloaded 22 paragraphs from an audio book, which I purchased and attempted to burn them to an audio cd. The burn process worked; however, the chapters were not in sequence. For example th enew cd began with ch 19, then 3, 4,
-
Restricting illness types in table T572B
We have a requirement as part of an ESS/MSS rollout to restrict the illness reasons to a set list. This list differs from the current list in the above table. Is there a way to restrict which list is shown depending on Personnel Subarea Grouping. The
-
I regeisted an alert using the following syntax in oracle DECLARE msg VARCHAR2 (10) := NULL; status VARCHAR2 (10) := NULL; BEGIN DBMS_ALERT.REGISTER('ALERT1234'); LOOP EXIT WHEN (msg IS NOT NULL); DBMS_ALERT.waitone ('ALERT1234', msg, status, 10); EN