K7n2 Delta Ilrs "Windows Setup cant find hard drives" plzz help

hia guys i know this has been in many posts but my question isnt answerd im affraid ok here we go
im trying to get win XP sp2 installed on my new hard drive (ill get to why i have this new hard drive soon lol
1) boot the system and press Ctrl + F and setup an array (stripe) all says functional etc save and exit
2) put in the xp disk and boot
3) press f6 and install my sata drivers (i got off the main web site)
4) press enter to install windows
5) "windows setup cannot find any hard drives" ???????????
basicly i had ubuntu on my pc using an 80gb sata ii set to sata i all was good and fine i got bored and wanted windows back to play games again so i put in my xp disk and tryed to install it but it said cant find hard drives i thort i had killed the disk with the grub bootloader messing up the mbr so i got a new disk and re set the bios and cmos etc went to instal xp and the same problem remains 
all my m8s dono wht to do nore do i were all stumped with this one as the new drive wont be recognized by windows
strange thing is when i put the 80gb back in ubuntu loads up fine (i only have 1 hard drive in at a time)
please help meeeeee
K7n2 Delta Ilsr
barton xp 2800 +
X700 ATI AGP
1.7 gb ddr 400 ram
80gb sata maxtor dimond max (ubuntu)
160gb sata maxtor dimond max (new) 
bios "W6570MS V7.6 110703

Quote from: Qtip on 16-September-07, 10:17:09
Also, what are new MBs doing so that one doesnt have to deal with this annoying F-6 step?  For some reason I think I heard new MBs dont require this F-6 step.
for his mobo, the drivers are absolutely necessary to be loaded when SATA HDD are used. that is due onboard sata controller.

Similar Messages

  • Installed New Toshiba 320gb hard drive...windows 7 professionaL 64 bit cant find hard drive

    I recently got a replacement hard drive from HP...a Toshiba 320gb(MK3261GSYN)...I installed the hard drive into my hp probook4530s(XU074UT#ABA)...when I go to install windows 7 professional 64 bit edition, windows isnt able to find any hard disk to install the operating system on. But before even putting in the windows 7 disc, the computer asks me to install a operating system onto my hard drive. Also when I do a hard disk check test...the hp bios software automatically says the hard disk has failed.

    Hi,
    Before going any further, I would like to verify these situations:
    1 Did this issue appear before?
    2 What have you done with PC before the issue appear?
    According to your description, that seems the issue related with driver or programs conflict with Windows 7.  I suggest to perform these tests to troubleshoot
    the issue:
    1 Unplug all unnecessary hardware and login with Safe Mode or
    Clean Boot
    2 If it works well in Safe Mode, please remove all third party tools or programs, reinstall or update the hardware drivers to the latest version.
    3 If the issue persists,  you can perform an in-place upgrade to fix the system issue:
    http://support.microsoft.com/kb/2255099
    Hope that helps.
    Regards,
    Leo   Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Cant find hard drive

    so i just put in a 2 hard drive into my g5 and i cant find in when it boots up and in finder i cant see it. and im trying to put a newer vertion of osx on the 2 hard drive so.. if anyone made seens out of that.. help?

    After installing a new drive run Disk Utility. The drive should show at the left. Select the drive and use the "Erase" function to format it as "Mac Extended Journaled". If the drive doesn't show in "Disk Utility" it may be not connected properly, or it may have SSC (Spread Spectrum Clocking) enabled. The built-in disk controller on the G5 will not work with SSC. Some drives can disable SSC via a jumper change, others have to have it changed via a PC.

  • Bios cant find hard drive

    Hello
    I have a problem with my tinkpad. I would like to reinstall windows, but my bios can't recodnise my hard drive anymore. But if I boot from an linux cd (like knoppix) I found the harddrive and can read and writ on it. (So it is no hardware problem).
    Is there a tool with wish I can fix my bios.
    The erroer occured when I tryed to boot Window, but swished the power off during that.
    I have Windos XP profesional on my machine.
    Thanks for you help.
    (I can not get my original CDs as I am working Oversee at the moment. If there is a tool around to fix that problem, it would be nice if somebody could give me the download link. )
    Ruth
    Solved!
    Go to Solution.

    Hi Ruth,
    Ja kannst Du. Falls es nicht funktioniert, gehst Du wieder zurück in compatability und den „Intel Matrix Storage Driver“ für Deinen TP hier holen. (TP selektieren und auf Hard Drive klicken, der richtigen Treiber soll sofort zu sehen sein). Bitte die Anweisungen genau lesen.
    S-ATA ist schneller als P-ATA (Datentransferrate).
    Gruß
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Installer cant find hard drive

    Now when I download update for my G4 power book IE the latest ITunes and other Apple updates the Mac installer dosent show hard drive to install to. HELP!!!!!

    what OS is installed on the machine, how much free space is on the drive, is there any error message when installing and what does it say exactly?

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

    My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

    Lbo51380 wrote:
    cant find an itunes app for my laptop. is there something i can get that will help with this?
    Go here -> http://www.apple.com/itunes/download/

  • Hi,i have the new ipad 16gb it was working fine till i went to download te new i tunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes en usb symbol.

    i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.

    Try these instructions:
    http://support.apple.com/kb/TS3281
    You may also have to go to the link in the bottom paragraph if the first page instructions do not work.

  • Can't instal Windows 7 to new hard drive

    Hello everyone,
    I was looking for solution for a while, but cant find it, so I really hope you'll help me here ! 
    First of all, I 've been using my pc until I received the S.M.A.R.T. warning about possible hard drive failure soon, and one morning PC didnt start - one of the hard drives was dead (in my hp model there are two hard drives). After finding out which one was it ( I tried taking one hard drive out, leaving the other and vice versa) I bought a new 500 GB hard drive. Aparently the damaged hard drive was the one with operating system, because of startup message which told me that operating system not found. Nothing fancy, just instal windows like I always did, or so I thought ..
    Got my USB flash drive with Windows 7 64 bit, plug it in, the usual windows instal guide loads up.  I choose my language , keyboard input etc . At the point where I have to choose "where do I want to instal my windows" I see two hard drives: 1) disk 0 Partition 1 (my old original  232 GB stock drive) and 2) disk 1 Partition 1 (new recently purchased 500GB drive).
    So ofcourse, since I replaced old hard drive with the new one I just bought, put it in the same slot, naturaly I chose my location for windows - new hard disk 1 Partition 1. When I highlighted it, a yellow mark apeared at the botom which said "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu". 
    Ok, so I tried to continue anyway, I pressed next and windows began to instal, took about 10 - 15 mins. Everythings normal until first restart part before completing instalation. PC restarted and .. Windows instalation setup started once more from the begining. So I thought , ok I ll try to instal to the old hard drive disk 0 Partition 1 ( this time there was no yellow warning mark). So instalation began again , restarted , and ... Once more instalation setup starting from begining ! 
    I am really lost here, I tried replacing hard drives places whith each other, or leaving just one of them, every time windows starts instaling from begining ! Allthough, everytime there are less and less disk space, which means it actualy is instaling. 
    So any thoughts where to start ? 
    I would be so greatful for your help,
    And see ya 

    Hi @Seniunas ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    It is my understand that one of your two hard drives failed.  You have replaced the failed drive and are having a difficulty installing Windows 7 from a USB stick.
    I have some questions.
    What is your exact model of n DV9700 notebook?
    How Do I Find My Model Number or Product Number?
    Is this a retail version of Windows 7?
    Were your drives setup in a RAID configuration or  just  two individual drives, one being the boot drive  with Windows.
    You could try this,  I am not sure if it will work.
    Remove the 232 GB drive completely from your system.
    Boot to your Windows 7, USB stick and let Windows format the drive before it installing Windows.
    If this completes successfully, make sure the boot order is set to boot to that drive and test it.
    If you are then able to boot into windows,  shut down the notebook and reinstall the secondary drive.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Problem installing windows on a secondary hard drive

    Hi,
    Here's my issue (sorry for my english, I'm french):
    -I have a macbook pro 15" with OSx Mavericks.
    -I have a SDD harddrive PLUS a 500GO HDD connected to the optical slot.
    I want to install windows on my secondary hard drive.
    What I have done so far:
    -I've cloned my older windows partition.
    -I've created a bootcamp partition on my secondary HDD.
    -I've restaured my clone to the new bootcamp partition on that secondary HDD.
    Up to that point, everything seemed alright.
    BUT when I try to boot on the windows partition, I get this message:
    no bootable device insert boot disk and press any key
    As if my MBP couldn't boot on a secondary hard drive.
    I've looked for answers on this forum but didn"t find anything.
    thanks,
    m

    The only difference between your setup and mine is that I have the SSD in the optical slot and the windows image is on my HD. I boot from the optical slot though, as all my regular Mac stuff is on the SSD. All I can think to do is use Bootcamp to delete the partition and try again. It sure seems like it should work.

  • How to install Windows 7 on new hard drive?

    I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
    1. How do I install Windows 7 on new hard drive?
    2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
    by the way this is my laptop spec (for reference) ; -
    * Note *
    I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
    I hope somebody will help me answer my question,
    Thank You
    Solved!
    Go to Solution.

    I got the solution;
    Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
    Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
    or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • How do I a setup an external hard drive on my Macbook Pro?

    How do I a setup an external hard drive on my Macbook Pro to my primary hard drive for my iTunes library?
    I ask this because every time I try to do this it my Mac book pro always wants to use the external hard drive I plug in as a time machine back up rather than my primary hard drive. I figured it would be cheaper and more efficient to use an external hard drive rather than have apple charge me an arm and a leg to replace and upgrade my current hard drive in my Mac book pro.

    I responded to this in your duplicate posting at: http://discussions.apple.com/thread.jspa?threadID=2690347
    I recommend giving a first post a chance before posting a second time, especially since it may result in a lot of duplication in effort from the people volunteering their time here.

  • I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the Mac, they are all locked.  Help, please.  Thanks

    I had all photos on a Windows desktop.  Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive.  When I go to import them into LR on the mac, they are all locked.  Help, please!

    "I plugged the external into the Mac and moved a folder of images onto the desktop.  It looks like it went from read only to not locked.  Is this possible?"
    Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
    I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

  • Run windows 7 on external hard drive?

    I'm purchasing a MAC mini to replace my G4 and PC. I would like to have Windows available for several applications (mainly for the kids) and am wondering if I could install windows on an external hard drive and run it through the Mini. I really don't want to partition the Mini's HD for both OS as I prefer to stay as far away from windows as possible. Thanks.

    It all depends on the PC motherboard and BIOS, I don't even think MS has done anything draconian or such, and it is possible and actually easy, with the right X58 say motherboards (most). My Intel DX58SO I used to install via built in eSATA.
    There is nothing wrong with or reason to fear Windows, but if kids want to play games, a VM isn't going to cut it. Buy a cheap mini just for Windows, or a PC, or run OS X off external drive and use the internal for Windows only.
    Windows 7 + MS Security Essentials is solid and best yet and as easy to use and not all that different than Mac OS (and maybe has had more testing even). Hopefully computers can be seen for what they are, used as tools, objectively.

Maybe you are looking for

  • Oim-config.xml was not found in MDS Repository.

    Hi there, I'm trying to install Oracle Fusion Application (last version .5) but I can't go ahead becuase I got an error during the OIM Server installation. $ uname -a Linux server02 2.6.39-200.24.1.el6uek.x86_64 #1 SMP Sat Jun 23 02:39:07 EDT 2012 x8

  • 7200 RPM drives in the Macbook Pro...

    Does the Macbook Pro with a 7200 RPM HD have any physical differences when compared to the 5400 RPM version of the computer? Specifically, I am looking for any differences related to cooling. For example, a different hard drive mount (with heat sinks

  • Acrobat X Pro: Save As failed to process this document. No file was created.

    Hi All, Hope you all can help me on this as I keep getting error whenever I want to save as word/excel. Have not really try out the others option. I have tried to reinstall the whole Acrobat X Pro, but the issue is not fixed. Hope some kind person ca

  • Why is the DAQmx Read VI so slow?

    Hello everybody. I'm using Labview 8.5.1. and NI DAQmx 8.6 and I'm wondering what the DAQmx Read VI is actually doing. What I want to measure is a 1kHz signal. To do this, I'm using a VI similar to the attached one (a pulsed 1kHz signal serves as tri

  • Why a base class cannot be a Private or Protected ?????

    why a base class cannot be a Private or Protected ?????