K7n2 delta ilsr - cluster size

How exactly would I change my cluster size? Also, if I just wanted to do it for the raid array - not the os volume, could I do that w/o a clean windows install?

Quote
Originally posted by loopyloops
Quote
Originally posted by Bonz
Yea I have to agree with Raven on this...don't mess with your cluster sizes because it usually leads to a reload of your system...windows wants that decided early on in the load if you are wanting to change it for real...I have never seen a benefit myself when I experimented with it...if I dropped it lower than the default 4069 then it drags...you can waste a lot of space cranking it up tho, pictures are brutal but your speed does improve...most of these things are trial and error type things tho but do as you see fit for your setup...
Bonz
This has to do with my upcoming raid 0 array.
I think I'll just do it 16stripe/4cluster.

Similar Messages

MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

Hi, i have major trubble.
Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
I've got the latest bios ver. 7.8 but no difference
AMD XP2800+
Kingston 2x512mb
ATI Saphire Radeon 9600pro 256mb
Soundblaster Live Value
XP pro sp2
MSI K7N2 Delta ILSR (MS 6570)

I went to JME-Data and purchased an
True430
ATX 430 Watt Power Supply with PFC
For AMD™ and Intel® systems including
Pentium® 4
Dedicated output circuitry
Voltage feedback
Antec Low NoiseTechnology
AQ3 - Antec 3 year parts & labor warranty
True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
The prise 1099:-
And everything works great, Thank you very much for the tip. :-)
No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

K7N2 DELTA-ILSR AND DDR-RAM

I got K7N2 Delta-ILSR, the last bios version, and
2x256 twinmos pc3200 ram. The 50% of the times the computer startes without problems, but the other 50% it gets hang up when I start the computer and the "d-Leds" indicate:" the memory module is damaged or not installed properly".
I know that the ram-modules works, but not with this Motherboard.
I need to get new ram-modules.
Somebody have the K7N2 DELTA-ILSR, with ddr-ram that works ??? (not K7N2G- IL and ILSR)
[size=15]You can list this here, it will help a lot of people! [/SIZE]

If you'll look at the start of the forum you'll see an article "good memory choices" start there.If you don't want to spend the bucks buying new mem read this http://www.msi.com.tw/program/e_service/forum/index.php?threadid=20221&boardid=14

K7N2 Delta-ILSR + FX5700-256td = PC Shudown and Lock

i play a Doom 3 demo or Morrowind and in the short while to be playing the computer it is extinguished
MSI K7N2 Delta-ILSR (v7.8 Bios)
MSI FX5700-256td (last bios)
AMD Sempron 2600+
512 DDR
300W power
WinXP SP2, Suse Linux 9.1
all patch´s and last drivers for all OS
I look the 8X AGP dont work...
4X Agp works... Im proving now

AMD Athlon Sempron 2600+
MSI K7N2 Delta - MS-6570
MSI FX5700-TD256
System BIOS : 08/02/2004-nVidia-nForce-6A61BM4CC-00
Memory: 512MB 16x(32Mx8) DDR-SDRAM PC3200U-2533-600 (CL2.5 up to 200MHz)
HD: 80G SATA
Voltage Sensor(s)
CPU Voltage : 1.55V
Aux Voltage : 1.63V
+3.3V Voltage : 3.25V
+5V Voltage : 5.03V
+12V Voltage : 11.98V
-12V Voltage : -12.03V
-5V Voltage : -5.15V
Standby Voltage : 4.97V
AGP Bus(es) on Hub 1
Version : 3.00
Speed : 4x Fast-Writes Enabled : No
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 128MB

AGP Setup For k7n2 delta ilsr

I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

Hi,
No, leave it at 64 or 128.
Go here for an explanation:
http://www.rojakpot.com/default.aspx?location=7&var1=18
Then - Click on: "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
Axel

Case Recommendation for K7N2 Delta-ILSR

Greetings,
I'm looking for a mid size ATX case that that has the front usb etc. ports prewired as to work easily with a K7N2 Delta-ILSR mb. By that I mean I don't have to plug each wire individually (with names that don't match) just a plug that goes on the mb. My eyesight isn't as sharp so hooking up those one wire at a time is tediuous. Not to mention the lack of starndards Does anyone know if this is address on the next rev of mb's (with pcix etc).
Thanks

Brazos,
I have yet to see a case that has all the USB wires together, they are all 1 pin at a time. You will find the Antec line of cases very good. (You can always use a magnifying glass to see the pins.) The pin names on the Antec cases are standardized and easy to figure out.
If you want a good case at a cheap price, then go with the SLK3700AMB:
If you want a good high end case, then go with the Sonata:
If weight is an issue, then go with the Super Lanboy:
Take Care,
Richard

K7n2 delt ilsr instabilty problem update

have a k7n2 delta ilsr have an issue where it is unstalble ie get bsod at welcom etc at 400 fsb ie 200 setting in bios will run at 166 in safe mode the 3200 cpu is reconised as at 2.39 ghz it should be 2.2 ghz if i run cpucz it says the multiplier is *12 is this a motherbord fault have updated bios too 7.8 latesed have tried diff make of memory power supply but i think the problem is looking me in the face in the fact that the cpu is reconised as 2.39 ghz and the muilt is *12 i think it should be * 11 can any body help regards bazer

yes has latesd bios    AMD Athlon(tm) XP 2700+ here is some info pc wizard 2005
Codename :   Barton
Revision :   A2
Technology :   0.13µ
CPU ID :   6.A.0
CPU IDEx :   7.A.0
Features :
VME - Virtual Mode Ext. :   Yes
DE - Debugging Extension :   Yes
PSE - Page Size Extension :   Yes
TSC - Time Stamp Counter :   Yes
MSR - Model Specific Registers :   Yes
PAE - Physical Address Extension :   Yes
MCE - Machine Check Exception :   Yes
APIC - Local APIC Built-in :   Yes
SEP - Fast System Call :   Yes
MTRR - Memory Type Range Reg. :   Yes
PGE - Page Global Enable :   Yes
MCA - Machine Check Architecture :   Yes
PAT - Page Attribute Table :   Yes
PSE36 - 36-bit Page Size Extension :   Yes
PSN - Unique Serial Number :   No
DS - Debug Trace & EMON Store :   No
ACPI - Software Clock Control :   No
SS - Self Snoop :   No
TM - Thermal Monitor :   No
HTT - Hyper-Threading :   No
SBF - Signal Break on FERR :   No
MON - Monitor/Mwait :   No
DSCPL - CPL qualified Debug Store :   No
TM2 - Thermal Monitor 2 :   No
CID - Context ID :   No
EST - Enhanced SpeedStep Tec...   No
NX Bit - No-execute Page Protec...   No
VMX - Vanderpool Technology :   No
Miscellaneous :
FPU - Co-processor Built-in :   Yes
CX8 - CMPXCHG8B :   Yes
CX16 - CMPXCHG16B :   No
CMOV - Conditionnal Move Inst. :   Yes
CLF - Cache Line Flush :   No
FXSR - Fast Float Save & Restore :   Yes
DAZ - Denormals Are Zero :   No
MMX Technology :   Yes
SSE Technology :   Yes
SSE2 Technology :   No
SSE3 Technology :   No
X86-64 Technology :   No
AMD MMX Technology :   Yes
3DNow! Technology :   Yes
Extended 3DNow! Technology :   Yes
3DNow! Pro Technology :   Yes
SMP - MP Capability :   No
Power Status :
Voltage Control :   No
Frequency Control :   No
Thermal Sensor Built-in :   Yes
Addressing Information :
Physical Addressing max. :   34-bit
Linear Addressing max. :   32-bit
Mainboard Upgradebility :
Socket/Slot :   Socket A
Upgrade interface :   ZIF Socket
Supported Speed :   2200 MHz (or more)
Supported Voltage :   1.6V
al Information :
Performance Rating :   PR-3300 (estimated)
Real Frequency :   2164.89 MHz
Multiplier :   12x
Front Side Bus Information :
FSB Frequency :   180.4 MHz
Bus Speed :   360.8 MHz (DDR)
Initial Frequencies :
Frequency :   2000 MHz
FSB Frequency :   166 MHz
Control Clock Frequency :
Type :   None
Thermal Information :
Core Power :   63.42 W (estimated)
Resistance :   0.46 °C/W (estimated)
Processor Performance Information :
Throttle Mode AC :   None
Throttle Mode DC :   Adaptive
Current Configuration :   None
Throttle :   2164 MHz
CPU Throttle Temperature :   60°C
CPU Shutdown Temperature :   100°C
eneral Information :
A0 (RAS 0) :   256 (Single Bank)
A1 (RAS 2) :   256 (Single Bank)
A2 :   Empty
Memory Controller Information :
Memory Controller :   Standard, EDO
Number of connectors :   3
Max. Module Size :   32 MB
Max. Memory Size :   96 MB
Supported Speed :   70ns, 60ns
Supported Voltages :   5v
Error Detection Method :   8-bit Parity
Error Correction Capability :   Unspecified
Current/Supported Interleave :   1-way/1-way
Chipset Information :
Type :   DDR-SDRAM PC2900
Frequency :   180 MHz
FSB/RAM Multiplier :   1/1x
Channels :   Dual
ECC Diagnostic :   No
CAS Latency (tCL) :   3 clocks
RAS to CAS (tRCD) :   3 clocks
RAS Precharge (tRP) :   3 clocks
Cycle Time (tRAS) :   8 clocks
Information SPD EEPROM (A0) :
Manufacturer :   Samsung
Part Number :   M3 68L3223ETM-CCC
Serial Number :   F6016243
Type :   DDR-SDRAM PC3200 (200 MHz)
Size :   256 MB (1 rows, 4 banks)
Module Buffered :   No
Module Registered :   No
Width :   64-bit
Error Correction Capability :   No
Max. Burst Length :   8
Refresh :   Reduced (.5x)7.8 µs, Self Refresh
Voltage :   SSTL 2.5v
Supported Frequencies :   166 MHz, 200 MHz
CAS Latency (tCL) :   2.5 clocks @166 MHz, 3 clocks @200 MHz
RAS to CAS (tRCD) :   3 clocks @166 MHz, 3 clocks @200 MHz
RAS Precharge (tRP) :   3 clocks @166 MHz, 3 clocks @200 MHz
Cycle Time (tRAS) :   7 clocks @166 MHz, 8 clocks @200 MHz
Information SPD EEPROM (A1) :
Manufacturer :   Samsung
Part Number :   M3 68L3223ETM-CCC
Serial Number :   F6056193
Type :   DDR-SDRAM PC3200 (200 MHz)
Size :   256 MB (1 rows, 4 banks)
Module Buffered :   No
Module Registered :   No
Width :   64-bit
Error Correction Capability :   No
Max. Burst Length :   8
Refresh :   Reduced (.5x)7.8 µs, Self Refresh
Voltage :   SSTL 2.5v
Supported Frequencies :   166 MHz, 200 MHz
CAS Latency (tCL) :   2.5 clocks @166 MHz, 3 clocks @200 MHz
RAS to CAS (tRCD) :   3 clocks @166 MHz, 3 clocks @200 MHz
RAS Precharge (tRP) :   3 clocks @166 MHz, 3 clocks @200 MHz
Cycle Time (tRAS) :   7 clocks @166 MHz, 8 clocks @200 MHz

Someone plz help me with my k7n2 delta-ilsr

Hey everyone,
I just put my sytem togother and ran into a problem. I got the system to boot up just fine. It was not until I tried installing windows xp proffesional that I ran into problems. The installation process runs pretty smoothly, until the computer reboots to run windows for the first time. After it reboots the windows logo appears and the after 2 seconds or so, a blue screen appears saying that windows was shut down to prevent any damage to my computer. I have never encountered this problem before when I built other systems. The screen suggests that I should check my HDD's for viruses or check to see if they are configured correctly. The HDD's are SATA and I have them set up in RAID 0 mode and yeah I installed the RAID drivers during the installation process. Thinking that I had made mistake setting up the SATA drives, tried installing windows using a regular IDE hard drive and it gave the same message. I am stumped anybody have any ideas of what I might be doing wrong? Any help would be appreciated . My system specs are below.
MSI k7n2 delta-ilsr mobo
AMD 3000+ Athlon XP cpu (333 fsb)
ATI Raedon 9000 ( I know it's crappy , I'm still saving up for the ATI all in wonder 9800 )
x1 kingston 512mb pc3200 DIMM
x2 maxtor 80gb maxtor hdd's
x1 regular cd-rom drive
x1 floppy drive
420w raidmax psu
(+3.3v = 26A, +5v = 32A, +12v=13A)

Memory that comes with timing of 5 2 2 2 or 6 2 2 2 or usally winbond BH-5 memory chips. Ones with 5 3 2 2 or CH-5 winbond chips. The BH-5 chips overclock a little better than the CH-5. (Muskin uses BH-5 winbond in there black ram)
Winbond is no longer making BH-5 chips but is going to make a limited run of them as demend is high for them.
The first number shown here is the Traz and it controls the flush timing bench testing is showing that a higher number of 9, 10 or 11 or getting better bench results than the 6 or 5. Thats with Dual Channel memory.
The timing you show probly should be something like 8 3 3 3 or 8 3 3 2.5 unless it is there faster Dual channel ram.
The timing numbers can also appear like this 2 2 2 5 the high number is the Traz either way.
Look on your memory manufactor web site for the timing that if should run at also look at the voltage as this can make a big differance.

HELP me with my K7N2 delta ilsr

Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
When I start the pc from an off state, it runs up the fans and drives, but does not post.
The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
If I then press the reset button, the pc posts, and boots up just fine.
It does this EVERY time I start up.
I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
I have asked a few questions on other forums, but I cant solve it.
These are the suggestions so far.
1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
3. The cpu could be faulty? but would this not stop it running fuull stop?
4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
Im fairly new to the upgrade side of things, and I need some help with this one.
Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
HELP

+3.3v 14A
+5v 28A
+12v 16A
+5vsb 2A
-5v 0.5A
-12v 0.8A
Hope this helps, as my pc seems to be living with its case off a lot these days..haha

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

Strange phantom restarts on MSI K7N2 Delta ILSR

Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
MSI K7N2 Delta ILSR
Athlon XP 2500+ Barton
1026 MB Kingston DDR RAM (2x512 Dual)
Gforce 2 MX 200 AGP 4x
WD 60 GB 7200 RPM

I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

Kate needs HELP!!! MSI K7N2 Delta ILSR

Guys...
pls help me...
I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
I installed everything assembled it... booted and loaded fine for about 3 times...
and suddenly....
>power on
>no video
>no beeps
>after checking hard nothing happens...
>only thing I can tell is that the d bracket is indicating "memory section"
....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
Why woudl a memory suddenly not work?
I know I was adjusting bios for this and that....
I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
COuld it be the mobo or memory or the video card???
pls help....
My email is [email protected]...
please please help...
and guys in MSI what is your expert opinion? mobo? or memory?
Heeeeeeeeeeeeeeeellllp...
thanks...
Kate x

hi and welcome to this forum.
nice to se a girl here for a change
clear cmos jumper jbat1.
also try safe mode jumper j10 ans j11.
also try to reseat memory and dont trust the dbracket to 100%.
it can show wrong sometimes.
Quote
COuld it be the mobo or memory or the video card???
when you got it running then run http://www.memtest86.com to check memory,
also what psu do you have ?
post max amps on 3.3v 5v and 12v rails.
minimum is 28 35 16.recommended is higher.

Data corruption on MSI K7N2 Delta ILSR

Hi all,
Just got my new MSI K7N2 Delta ILSR up and running.
Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum )
While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
Then the overclocking began I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
When using an FSB of 166mhz no data corruption or crc errors.
What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
Help!
gr,
Remco

Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended
Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome
gr,
Remco

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

PNY and MSI K7N2 Delta - ILSR

Looking into buying the K7N2 Delta-ILSR...I have heard that it is a awesome overclocker, and a very fast board. Has anyone had experience with using...
PNY Optima PC2700 DDR memory on it? It is double sided memory, with Hynix chips. Hynix chips are listed on MSI's Memory Compatibility PDF...but i wanted to know if anyone has used it before? Thanks

Its not tehre, but it does use Hynix chips, which IS supported. I also have read in this forum that people have got my exact memory to work flawlessly on the board i want. Thanks anyway!

K7n2 delta ilsr - cluster size

Similar Messages

Maybe you are looking for