K7N2 Delta-ILSR + FX5700-256td = PC Shudown and Lock

i play a Doom 3 demo or Morrowind and in the short while to be playing the computer it is extinguished
MSI K7N2 Delta-ILSR (v7.8 Bios)
MSI FX5700-256td (last bios)
AMD Sempron 2600+
512 DDR
300W power
WinXP SP2, Suse Linux 9.1
all patch´s and last drivers for all OS
I look the 8X AGP dont work...
4X Agp works... Im proving now

AMD Athlon Sempron 2600+
MSI K7N2 Delta - MS-6570
MSI FX5700-TD256
System BIOS : 08/02/2004-nVidia-nForce-6A61BM4CC-00
Memory: 512MB 16x(32Mx8) DDR-SDRAM PC3200U-2533-600 (CL2.5 up to 200MHz)
HD: 80G SATA
Voltage Sensor(s)
CPU Voltage : 1.55V
Aux Voltage : 1.63V
+3.3V Voltage : 3.25V
+5V Voltage : 5.03V
+12V Voltage : 11.98V
-12V Voltage : -12.03V
-5V Voltage : -5.15V
Standby Voltage : 4.97V
AGP Bus(es) on Hub 1
Version : 3.00
Speed : 4x Fast-Writes Enabled : No
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 128MB

Similar Messages

K7N2 DELTA-ILSR AND DDR-RAM

I got K7N2 Delta-ILSR, the last bios version, and
2x256 twinmos pc3200 ram. The 50% of the times the computer startes without problems, but the other 50% it gets hang up when I start the computer and the "d-Leds" indicate:" the memory module is damaged or not installed properly".
I know that the ram-modules works, but not with this Motherboard.
I need to get new ram-modules.
Somebody have the K7N2 DELTA-ILSR, with ddr-ram that works ??? (not K7N2G- IL and ILSR)
[size=15]You can list this here, it will help a lot of people! [/SIZE]

If you'll look at the start of the forum you'll see an article "good memory choices" start there.If you don't want to spend the bucks buying new mem read this http://www.msi.com.tw/program/e_service/forum/index.php?threadid=20221&boardid=14

PNY and MSI K7N2 Delta - ILSR

Looking into buying the K7N2 Delta-ILSR...I have heard that it is a awesome overclocker, and a very fast board. Has anyone had experience with using...
PNY Optima PC2700 DDR memory on it? It is double sided memory, with Hynix chips. Hynix chips are listed on MSI's Memory Compatibility PDF...but i wanted to know if anyone has used it before? Thanks

Its not tehre, but it does use Hynix chips, which IS supported. I also have read in this forum that people have got my exact memory to work flawlessly on the board i want. Thanks anyway!

MSI K7N2 Delta ILSR and Serial ATA Drive

I've got a very strange problem....
Yesterday i have installed my new motherboard (MSI K7N2 Delta ILSR) but i have a problem with the SATA feature.
I've got two drives : one 40GB ATA (Western Digital) and one 160GB SATA also from Western Digital.
My SATA drive is recognized by the FastTrak BIOS (v2) but i'm unable to reinstall Windows XP Professional (with SP2 Slipstreamed) because Windows Setup didn't recognize the SATA disk. I have loaded the Promise Serial ATA Drivers at the begin of the installation (F6)...
I have also tried 2 different versions of the Promise SATA Drivers; the one that cames with my motherboard CD, and the most recent from the MSI website. But with both drivers the same result. How can i get my Serial ATA Harddisk get work with this motherboard?
Any help will be appreciated.
Thanks,
Computerfreakje.
PS : My specifications are the following:
MSI K7N2 Delta ILSR (Rev. 7.4)
AMD Athlon XP 2500+
2x 256MB Kingston PC3200 Dual Channel
ATI Radeon 9800 Pro 128mb (R360)
Western Digital 40GB ATA
Western Digital 160GB SATA

Thanks for your reply Richard,
My motherboard didn't came with a floppy (I have bought an bulk version..) I have created a SATA floppy by myself. (I have got the drivers from the motherboard cd..) These drivers are also good, right?
Which type of RAID Array should i create? Because i have only one SATA drive.....
I think the "auto" feature is the easiest way?
Thanks.
Computerfreakje.

MSI K7N2 Delta-ILSR and Mushkin

Does anyone know if the MSI K7N2 Delta-ILSR has any issues with Mushkin ram. Specifically, with Mushkin PC3200 2-2-2? I previously had Mushkin PC2100 2-2-2 in it with no issues, but that was on a 266 FSB. On a 400 FSB, there may be issues. I dont know.

I did a little troubleshooting on my own and learned some things. I borrowed my neighbors computer (athlon xp 2600+ (266) on an asus A7N8X-E Deluxe with 2 512 meg sticks of Mushkin PC2100 2-2-2 ram). This computer has a generic 300 watt power supply, so you have to take this into account after seeing the results. First I ran prime95 on his machine and it ran rock solid. I substituted my PC3200 memory in his machine, and first ran it at 266 with no errors. Then I bumped the memory up to 333 and I got an error after 1 hour 17 minutes. Then I bumped the memory up to 400 and couldnt get past 10 minutes without an error.
I then put my proc and his memory in his computer, and my proc ran stable, and I didnt get any of the rebooting that I was getting in my machine. When I put my memory in his machine with my proc, I get about the same results as with his proc.
When I put my proc in my machine with his PC2100 memory, I still got some rebooting. When I substituted my PC3200 memory in, I still got the rebooting.
I then underclocked my processor down from 200 mhz bus to 191, and kept the ratio at 1:1 for memory, and still got some rebooting.
I then changed the ratio to 6:5, so the bus is now 159. The timings are at 5-2-2-2. The computer is running very stable and goes through prime95 with no errors.
I can put my proc and ram in my neighbors computer and get no rebooting, whereas in mine it wont stop rebooting when I have it set to spec. It looks like I have to change my mobo and/or my PSU. My PSU is an Enermax 431 watt and I have never heard of an Enermax going bad. That makes me suspect the mobo a little more, but I dont really know.
I will continue to experiment with bus speeds, ratios, and timings to see if I can get any more out of this system. But at least it is running OK now.

K7N2 Delta ILSR and XP2500+ - strange overclocking problem

Relevant configuration data:
- K7N2 Delta ILSR (with 7.6 BIOS version)
- Barton 2500+ (AQXEA)
- Arctic Silver 3 thermal compound
- GlobalWin CAK 38 (7000 rpm DELTA, all copper)
- 2x512 MB Corsair XMS cmx512 3200c2 (it should run 6-3-3-2 at 200MHz on AMD systems according to older documents, and on 6-3-3-2.5 at 200MHz on AMD systems according to newer documents)
- PSU Enermax EG465P-VE (430W)
- Gigabyte ATI Radeon 9800Pro 128MB
- Battlefield 1942 game
I have 2 seperate problems:
1. When I try to set my proc on 13x166 (Barton XP3000+) BIOS won't recognise that settings and it gives me real-clock rate of 833MHz (and no name, just "Athlon XP"). Just a note, when I set proc to be XP2600 or XP2800, everything is great in BIOS and in real conditions (Windows, Battlefield). I had 7.4 version of BIOS and I tried with new 7.6 version and nothing has changed (as I suspected). Can someone help me about this ?
2. Second problem is a bit more serious.
I'm having problems setting my proc to work with 100% stability on 200MHz FSB speed.
This is what's going on:
- Behaviour in Windows is pretty much good (no random restarts).
- Sometimes (on rare occasions) blues screen appears when I'm in windows or some program. Last time when it appeared it said something about "memory managment". I tried to lower memory settings but nothing seemed to be better.
- If I try to freshly install windows on 200 MHz FSB in 98% of the cases installation will be abrupted (blue screen or resets) or it won't even start to install.
- What's bothering me the most is this: Battlefield 1942 is crashing on regular basis. Sometimes it can hold for 5 minutes, sometimes 20 minutes, sometimes half an hour. But on certain moment, puff, and I'm out in Windows. Not a computer restart, just it throws me on desktop.
I've been checking the temperature on regular basis when I'm playing. It is always low.
I've tried to raise core voltage all the way to 1.8v, but same thing happens.
I've tried to lower memory settings, but I get same BF crashing.
I don't know what else to do or what other component to acuse for instability.
Can somebody please help me ?
Thank you in advance !

Quote
Originally posted by ellswt
On the newer 2500+'s the multiplier is locked, this could be your problem
Nope, because I am changing multiplyers without probs. The only multiplyer that doesn't work is 13x.
Quote
...loosen up your memory timings to add stability, and give it a try again at the 200 mhz fsb without changing the multiplier.
I drove the memory according to the Corsair's specs, and I drove it on lower settings also. No change.
Quote
also you may wish to go up to 2.7 volts for your ram, and 1.7 volts on your processor to add stability, remember sometimes you have to go up gradually a step or two at a time and keep it there for a day or two before you reach your top OC.
I might try upping ram voltage but that doesn't sound good, because it IS DDR 400 memory (an excellent one too !).
It's not like I'm trying to drive it over 200MHz. 200MHz is this memory's normal frequency.
Quote
Newest video driver from ATI may help with the stability on your gaming.
Already have newest drivers.
Anyway, thanks for the tips !

Hyper-X and K7N2 Delta-ILSR Ultra 400?

hey i was gonna ask if anyone is running an K7N2 Delta-ILSR Ultra 400 with some kingston pc-3700 ram? i want to get some pc 3700 ...my 1st choice was corsir but price of the corsair pc-3700 is a bit higher then the hyper-x

Kingston PC3200 will work very well with this board as I have tested it and I shall got on Monday my new 2x256 PC3200 kingston CL2.5 and I will be very happy . So You can use it but I am not sure about Hyper-X performance GreetZ

Upgrade to K7N2 DELTA-ILSR help

Thinking of purchaseing the K7N2 DELTA-ILSR board and would like some help verifying the hardware i have not having any problem with this mobo.
AMD|2800/333 ATHLON XP BARTON
MEM - DDR Corsair dual 512MB X2 KIT|VS1GBKIT333
Soundblaster 5.1 Platinum
Liteon 52x32x52 r\rw
80GB|SEAGATE ST380011A 7200
60GB|SEAGATE ST360015A 7200
PSU- Super-Flower Silent TT aluminum 450W ATX power supplyTTGI TT-450SS (450W). AC Input: 100~120Vac/200~240Vac, 10/6A, 60/50Hz. DC Output: +3.3V~28.0A, +5V~42.0A, +12V~18.0A. +5Vsb~3.0A, -5V~0.5A, -12V~0.8a). MAX OUTPUT POWER: 450W. Cooling: Air convention by +12V DC fan. 10 IDE connectors, 2 floppy connectors, +12V power connector, Aux power connector
CPU FAN - OCZ GLADIATOR 3 Socket A/462 up to Athlon XP 3200+. Single-piece pure copper construction. Dimensions: 60x60x30mm. FAN: 60x60x25. Medium-speed. Or: 60x60x25 Quiet. High-speed. Voltage: 12 Volt. Ball bearing fan
Video Card - Chaintech VGA GF FX5700 SA5700 256M
It looks like a great board and i see some great reviews but also see alot of small issue with compadability. It looks like the 1st thing is to upgrade the bios, and hope i don't have any issue with my cable modem box (guess i could put my old network card back in and disable the mobo's built in net work if there is problems).
I don't do O\C so nothing to worry about there. My old board is an Epox and is max'd out with no future upgrade room, so that's why i'd like to upgrade.
Thanks for any help guys.
rider

rider45,
If you do not need the Break Out Box from the Platinum, I would go with the onboard nVidia SoundStorm. It sounds better than the old Live! and uses less CPU Cycles.
Take Care,
Richard

Someone plz help me with my k7n2 delta-ilsr

Hey everyone,
I just put my sytem togother and ran into a problem. I got the system to boot up just fine. It was not until I tried installing windows xp proffesional that I ran into problems. The installation process runs pretty smoothly, until the computer reboots to run windows for the first time. After it reboots the windows logo appears and the after 2 seconds or so, a blue screen appears saying that windows was shut down to prevent any damage to my computer. I have never encountered this problem before when I built other systems. The screen suggests that I should check my HDD's for viruses or check to see if they are configured correctly. The HDD's are SATA and I have them set up in RAID 0 mode and yeah I installed the RAID drivers during the installation process. Thinking that I had made mistake setting up the SATA drives, tried installing windows using a regular IDE hard drive and it gave the same message. I am stumped anybody have any ideas of what I might be doing wrong? Any help would be appreciated . My system specs are below.
MSI k7n2 delta-ilsr mobo
AMD 3000+ Athlon XP cpu (333 fsb)
ATI Raedon 9000 ( I know it's crappy , I'm still saving up for the ATI all in wonder 9800 )
x1 kingston 512mb pc3200 DIMM
x2 maxtor 80gb maxtor hdd's
x1 regular cd-rom drive
x1 floppy drive
420w raidmax psu
(+3.3v = 26A, +5v = 32A, +12v=13A)

Memory that comes with timing of 5 2 2 2 or 6 2 2 2 or usally winbond BH-5 memory chips. Ones with 5 3 2 2 or CH-5 winbond chips. The BH-5 chips overclock a little better than the CH-5. (Muskin uses BH-5 winbond in there black ram)
Winbond is no longer making BH-5 chips but is going to make a limited run of them as demend is high for them.
The first number shown here is the Traz and it controls the flush timing bench testing is showing that a higher number of 9, 10 or 11 or getting better bench results than the 6 or 5. Thats with Dual Channel memory.
The timing you show probly should be something like 8 3 3 3 or 8 3 3 2.5 unless it is there faster Dual channel ram.
The timing numbers can also appear like this 2 2 2 5 the high number is the Traz either way.
Look on your memory manufactor web site for the timing that if should run at also look at the voltage as this can make a big differance.

HELP me with my K7N2 delta ilsr

Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
When I start the pc from an off state, it runs up the fans and drives, but does not post.
The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
If I then press the reset button, the pc posts, and boots up just fine.
It does this EVERY time I start up.
I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
I have asked a few questions on other forums, but I cant solve it.
These are the suggestions so far.
1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
3. The cpu could be faulty? but would this not stop it running fuull stop?
4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
Im fairly new to the upgrade side of things, and I need some help with this one.
Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
HELP

+3.3v 14A
+5v 28A
+12v 16A
+5vsb 2A
-5v 0.5A
-12v 0.8A
Hope this helps, as my pc seems to be living with its case off a lot these days..haha

Internet Connection Problem on MSI K7N2-Delta-ILSR

Hi, recently I buy an MSI K7N2-Delta-ILSR.I have a problem when I was trying to connect to the Internet through my modem on WinXP Pro SP1. It bring me up an error message 678 ( The computer that was tried to connect did not respond...). I have also a second hard disk with Mel windows. On disk the disk with the Mel I don’t have any problem with the internet connection. All my settings are same on WInXP pro and Mel.I have checked I thousand times. My computer configuration is:
Athlon XP 2400+ Overclocked to 2205MHz
2 memory modules of 256MB 400 manufactured by Samsung
TharmalTake Volcano 11
Triplex Xabre 400 PRO with 128MB
Hercules Gamesurrround Fortissimo III 7.1
Microcom InPorte Home modem 56k
Leadtek winfast 2000 (TV/FM radio)
Acard SCSI controller (Acard AEC-6710D) for my scanner
WesternDigital WD800 GB
WesternDigital 15.3gb
Bios ver.7.4
Can anyone help me?

Quote
Originally posted by Roger Wilco
Hmmmmm, I\'m also having a problem with the onboard lan of the K7N2 Delta.
I have an ADSL connection, and have an Alcatel SpeedTouch Home modem.
I pretty much get the same error as SiliconMan (The computer that was tried to connect did not respond...)
I ended up giving up on it for the time being, just using my SMC NIC. Would be quite interested in finding out what the problem is though.
Anyone else in the same boat?
Hi,
Your problem is not the same, SiliconMan is trying to connect with a dial-up modem not LAN. Your problem sounds like it may be configuration, do a search on this post, I'm sure you will find people with onboard LAN troubles. It's hard to troubleshoot though since you didn't provide any info about your computer. Good Luck
Rob

Strange phantom restarts on MSI K7N2 Delta ILSR

Just wanted to see if I could get opinions on this. My MSI K7N2 Delta ILSR mobo runs real nice now, but still, on occasion, very rare and intermittently, it will just restart. Not likely a heat issue, as the temps are nice and low. Also, not just happenning when I'm playing a game or anything strenuous. Did it once while checking email, once during install of an MS Office program, and once during a game. Could it be my old Gforce 2 MX 200 video card, as the picture sometimes gets wavy (like fine waves on an ocean), and the old computer it was in did similar things, or is it common with this mobo.
MSI K7N2 Delta ILSR
Athlon XP 2500+ Barton
1026 MB Kingston DDR RAM (2x512 Dual)
Gforce 2 MX 200 AGP 4x
WD 60 GB 7200 RPM

I had errors on test 4 not 5 with Winbond 2-512 Dual Channel called Hardcore Cooling and they said that getting errors with memtest86 may not mean that the ram is defective, it may not be compatible with the memory comtrol and they had me RMA it back. I also was not able to run the ram stable at there advertized rate of 6 2 2 2 it was only stable at 8 3 3 2.5
I replaced it with OCZ after talking to there Tech support people about compatiblety problems with the Nvidia chipset. Sense I installed the OCZ I only had one ram reboot and when I checked I was running the voltage at 2.5 and OCZ said that I should be running at 2.6. They also said that I could run it up to 2.8 with no worry.
Look on manufactor web site to see what ram timing yours should be running at and what voltage, Auto setting in Bios is not always the best setting.
If it still not stable at manufactor spec than I'd talk to who ever you bought it from about replacing it or refund and buy something thats on the Nvidia compatible list.
Most ram manufactors have a list of motherboards that there ram will work on but sometimes the newer boards like K7N2 or not listed yet as still working that out.

Kate needs HELP!!! MSI K7N2 Delta ILSR

Guys...
pls help me...
I am assembling, yes I know I am a techi girl...., msik7n2 with radeon9600 and 2xCorsair Value Select 256Mb DDR 400Mhz PC3200 mem...(hence 512mb)
I installed everything assembled it... booted and loaded fine for about 3 times...
and suddenly....
>power on
>no video
>no beeps
>after checking hard nothing happens...
>only thing I can tell is that the d bracket is indicating "memory section"
....d-bracket from MSI K7N2 Delta ILSR is 1,3,4 red and 2 green. Which is according the the manual "Memory Detection Test"-if the memory module is damaged or not installed properly.
Why woudl a memory suddenly not work?
I know I was adjusting bios for this and that....
I think just before this happened.. I adjusted something on agp setting... but what ahs that got to do with memory?
COuld it be the mobo or memory or the video card???
pls help....
My email is [email protected]...
please please help...
and guys in MSI what is your expert opinion? mobo? or memory?
Heeeeeeeeeeeeeeeellllp...
thanks...
Kate x

hi and welcome to this forum.
nice to se a girl here for a change
clear cmos jumper jbat1.
also try safe mode jumper j10 ans j11.
also try to reseat memory and dont trust the dbracket to 100%.
it can show wrong sometimes.
Quote
COuld it be the mobo or memory or the video card???
when you got it running then run http://www.memtest86.com to check memory,
also what psu do you have ?
post max amps on 3.3v 5v and 12v rails.
minimum is 28 35 16.recommended is higher.

Data corruption on MSI K7N2 Delta ILSR

Hi all,
Just got my new MSI K7N2 Delta ILSR up and running.
Got some issues with the memory running at 200mhz while the Barton core of my Athlon Xp 2600+ was running 166mhz, this had to be 1:1 (thx forum )
While running the default bios settings with cpu/mem at 166/166 fsb everything is stable as hell. I have been running Prime95 for 2 days now and using the system for dvd ripping/encoding, UT2004 gaming etc.
Then the overclocking began I'm using the standard AMD cooler that came with my boxed Xp2600+ so I didn't expect an FSB of 200mhz.
I stopped at an FSB of 190mhz...been crunching Prime95 for 18 hours now and again very stable.
Now comes the problem : Sometimes I get crc errors when installing a game or decrypting a dvd!! But how can this be? Prime95 is stable at this 190fsb overclock.
When using an FSB of 166mhz no data corruption or crc errors.
What can this be? It's not the cables because they're all the same as in my old setup which was running (ahum...walking) stable. PCI/AGP speeds are locked when overclocking...
Only thing I can think of is the power supply. I've read in a warning post from Bas that the Q-Tec 550w psu I have is crap. So my guess is PSU, but maybe it's something else I'm forgetting...Any suggestions??
The stupid thing is when I'm not overclocking I don't have the data corruption problems, but I'm still using the same crappy Q-Tec 550w PSU.
Help!
gr,
Remco

Hmmm, that's curious. On the MSI K7N2 Delta ILSR product page Kingston memory is recommended
Ok, did a Memtest86 v1.11 pass at cpu/dimm 166/166 - no problems whatsoever. I think using Prime95 would have revealed memory problems...but will do another pass with cpu/dimm at 190/190.
Can overclocking affect the Promise Raid Controller?? It should be locked like the PCI/AGP but who knows...
Well, I still have to replace my PSU but I'm not 100% sure that this is the problem. What PSU would you recommend? ...and I'm also thinking about replacing the standard CPU cooler, any advice is welcome
gr,
Remco

FLASH BIOS MSI K7N2 Delta-ILSR ????????

I am trying to flash the BIOS of my K7N2 Delta-ILSR board. I follwed all the instructions from the MSI Web but I can't get it going. I booted from Win ME & Win98 but could not get into C: drive. So I used Command Prompt from Window to get into the C: drive and follwed the Flash Bios Procedures. I keep getting the message: AwdFlash No Support WinNT/2000/XP OS
I got problem with the temp after I updated the BIOS. I wanted to flash it back to the old Bios. Please help me out
Thank you
My system:
WinXP Pro
MSI K7N2 Delta-ILSR
AMD 2500+
1 GB DR3200
Seagate 160 SATA

http://www.msi.com.tw/html/support/bios/note/ntfs.htm

K7N2 Delta-ILSR + FX5700-256td = PC Shudown and Lock

Similar Messages

Maybe you are looking for