K7N2 Delta-L long pauses during boot

I bought all the parts and assembled the system, making sure I was always grounded.  When the system boots, it hangs during booting for long periods of time, but it resumes like normal afterwards.  I'm completely at a loss here. I've tried all kinds of things...  Please help... Thanks
The first pause begins with "Primary IDE channel no 80 conductor cable installed". then it pauses again just after "Verifying DMI Pool..." then it pauses sporadically after that. I've not installed any software yet.

my GOD wonk someone actually said thanks for the words....

Similar Messages

  • K7N2 Delta ILSR Takes forever to boot.

    Specs:
    K7N2 Delta ILSR Mobo
    Athlon xp 2500
    Kingston Hyper X 2700 DDR 512mb (its on the list)
    Geforce 2MX 32mb AGP videocard (I dont play games)
    3 Com 56k Win Modem
    IBM GXP120 60 gig ata133 Hard drive
    Pine 12X DVD drive
    LG 24x10x48 CD Burner
    Antec 300W power supply
    The problem is that it takes forever to install and boot windows with faster processors for some reason. I origianlly built this system with my old Athlon 1.33 and it had these problems.  I then tried a 900mhz athlon and it worked great, so I figured I damaged my 1.33 somehow.  I ordered a 2500+ and a zalmann cpu cooler and now am back to where I was, when the system starts it  seems very unstable and the screen goes blank for 10 minutes while its booting.  It shows about 3 seconds of the starting windows screen then the screen will go blank for a while anf there will be no hard drive activity then it will come back about 10 minutes later and then boot.  Sometimes the system will work fine then sometimes I cant even open my computer i just get the searching flashlight icon where my drives should be.  I have updated to the lastet BIOS.  Also while installing windows I get ocasional long pauses where it is doing nothing at all then it will just magically conitnue and do it in a fashion I would expect a machine of this speed to do.  

    Hmm not sure about the cable position on the CD drives, ill have to check that when I get home.  All the jumpers are set correcly, and the hard drive is all by itself and its on the right connector.  Thanks for the ideas, this problem is really killing me, I havent had these kind of hardware problems in years.  The thing I dont get is why it works good with the 900mhz and not with the 1.33 or 2500+

  • K7N2 Delta-L Long beeps after setting Bios!!

    Problem 1. After I save and exit Bios or even just exit the bios,the pc will not do anything other than have a black screen and long beeps.
    If I turn off the power and then restart the pc,it boots ok.
    Problem 2. The clock keeps gaing 25 minutes each day but only when connected to the internet.
    Anyone have any thoughts?
    If I stop the time server service it still gains. :O

    Hi there,
    Quote
    Originally posted by musicman53
    Problem 1. After I save and exit Bios or even just exit the bios,the pc will not do anything other than have a black screen and long beeps.
    If I turn off the power and then restart the pc,it boots ok.
    Problem 2. The clock keeps gaing 25 minutes each day but only when connected to the internet.
    Anyone have any thoughts?
    If I stop the time server service it still gains. :O
    I have the same problem on my K7N2 Delta-L system! The behaviour you describe doesn't happen every reboot, sometimes it also reboots normally. Sometimes I also get the problem described in the thread: "K7N2 Delta will not boot (blank, no beep)" - no boot, no beep, no video output. All this without overclocking.
    The leds on the D-bracket report it as being a RAM problem: "Memory Detection Test" (damaged or improperly installed memory module)
    My RAM is TwinMOS DDR400/PC3200 (with Winbond IC's), those are supported by the nForce2 SPP as listed on the nVidia site. I have purchased 2 seperate (but identical) 256MB DIMMs to operate in Dual Channel mode, which work, sometimes; sometimes the PC will boot in Single Channel mode (leaving me with 256MB available), other times in Dual Channel Mode.
    As they are not "matched" DIMMs, I ran a couple of cycles of memtest86 to check if they would operate in Dual Channel mode (when it would boot in DC mode), and of course, no errors.
    Some useful info:
    - I upgraded my BIOS to 5.2 and reset the BIOS settings to default + set FSB to 166Mhz +  switched off internal modem and audio.
    - XP 2600+ (166/333FSB)
    (the following shouldn't have any influence, but I'll include them for completeness sake)
    - GF4Ti4200 (VIVO)
    - SBLive value
    - 2 HD's on the primary IDE channel, CDR & DVDROM on secondary IDE channel
    Regards,
    darklite
    Ah, how I wish HW manufacturers would thoroughly test and debug their products (that includes the BIOS) prior to releasing it to the public - it can only harm their reputation.

  • Long Delay During Boot

    I think this fits in the Kernel & Hardware Issues section...
    Loaded my brand new HP DV7 laptop with Linux over the weekend (during the downtime!) and mostly works very well. A few bugs to irons out...
    One of the most annoying ones at the moment is that during boot, it takes a long time to load the 'boot' screen after grub - the screen where the Arch Logo's appear and then all the kernel bootup messages. And when I say long, I mean like 10 - 12 seconds! It just sits on a blank screen like it's trying to download those Arch logos over a 14.4 modem or something
    I have my framebuffer set to 792. It behaved like this both on the Install image (from USB key) and the finished installation.
    What's it actually doing there? Is there any way to speed it up?
    Thanks all

    As certain brands of laptops are known to have badly written acpi-tables for linux (though your version may be well- supported even), you may try passing acpi=off to your kernel cmd-line. Lets' see what it does, it may narrow down our problem...
    PS. In 2.6.27, they 've also removed that message that says "Booting..." or such just after lilo or grub. So we don't know as to when does it get to the actual execution of the kernel [i.e It spends a lot of time loading it]. I know I sound strange
    PS2. I guess the "Booting..." message is from the bootloader, not the kernel (as dmesg doesn't show it).
    Last edited by Onwards (2008-11-03 04:51:13)

  • FCS 3 (or call it Upgrade!) Well-known Long Pauses during Installation

    Does anyone know if the issue with the 'long pauses' of the progress bar hitting 100% during the installation of components and discs still exists during the Installation of FCS3? Just want to know what to expect!
    This was well-known for FCS2 I seem to remember.
    thanks.

    Hi,
    What exactly are you experiencing with FxFactory? Please do contact [email protected] if you are having any problems at all with FxFactory after the Final Cut Studio Upgrade.
    Thanks so much,
    Niclas

  • Long pauses during printing

    I have an HP C5550 all in one.  It workd fine for quite awhile, but now there are long pauses after it prints each line.  Tried unplugging the USB cable and doing a sef-test and got the same result

    Hello there! Welcome to the forums @rachp ,
    I read your post about how your printing is pausing after each line. As the printer is also pausing when you do the self test prints from the printer, this would point towards a hardware problem. I would suggest a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars.
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
    Best wishes
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How can I play online videos without many long pauses during play?

    I have current flash and 7.  Lately, all online videos have many long pauses throughout play.  They used to play continuously through.  Flash is enabled.
    How can I solve this?

    To help troubleshoot we'll need the following system information:
    Operating   system  
    Browser  
    Flash   Player version
    When reporting issues with video or audio, it's also helpful to get your system hardware and driver details.  Instructions for finding this information can be found here:
    Windows  
    Mac
    Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player.  I recommend trying both of the links below to see how they perform.  If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing.  You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
    HTML5   video  
    Non-HTML5 video

  • Long pauses during ParNew garbage collection Please Help !

    Hi,
    We are running a server application on an large machine (~120 CPU, ~380 GB Memory).
    After running 1 or 2 hours we suddenly get exorbitant application pause times during garbage collection and a massive cpu usage from the java vm
    We are running on Java 6 (64Bit) with 6GB Heap.
    Concurrent garbage collection is turned on using the parameters:
    -XX:+UseConcMarkSweepGC
    -XX:+CMSParallelRemarkEnabled
    -XX:CMSInitiatingOccupancyFraction=80
    -XX:+DisableExplicitGC
    We turned on verbose garbage collection and are getting the following output:
    1. Normal operation:
    Application time: 217.4656792 seconds
    3180.905: [GC 3180.906: [ParNew
    Desired survivor size 20119552 bytes, new threshold 4 (max 4)
    - age   1:    2843824 bytes,    2843824 total
    - age   2:    2577128 bytes,    5420952 total
    - age   3:    5742024 bytes,   11162976 total
    - age   4:     625672 bytes,   11788648 total
    : 329531K->15764K(353920K), 0.1484379 secs] 2435799K->2122105K(3392144K), 0.1492386 secs]
    Total time for which application threads were stopped: 0.1886810 seconds
    2. The Problem:
    Application time: 2.8858445 seconds
    5008.433: [GC 5008.434: [ParNew
    Desired survivor size 20119552 bytes, new threshold 2 (max 4)
    - age   1:   15837712 bytes,   15837712 total
    - age   2:   12284416 bytes,   28122128 total
    : 348338K->39296K(353920K), 138.5317715 secs] 2487779K->2192551K(3392144K), 138.5327383 secs]
    Total time for which application threads were stopped: 138.5778558 seconds
    Application time: 2.9764564 seconds
    5149.957: [GC 5149.957: [ParNew
    Desired survivor size 20119552 bytes, new threshold 2 (max 4)
    - age   1:    9483176 bytes,    9483176 total
    - age   2:   14499344 bytes,   23982520 total
    : 353920K->39296K(353920K), 231.5110574 secs] 2507175K->2204546K(3392144K), 231.5121011 secs]
    Total time for which application threads were stopped: 231.5257754 seconds
    Application time: 2.7932907 seconds
    5384.277: [GC 5384.278: [ParNew
    Desired survivor size 20119552 bytes, new threshold 4 (max 4)
    - age   1:   10756376 bytes,   10756376 total
    - age   2:    9135888 bytes,   19892264 total
    : 353920K->28449K(353920K), 256.2065591 secs] 2519170K->2207651K(3392144K), 256.2076388 secs]
    Total time for which application threads were stopped: 256.2221463 seconds
    I can't find any significant differences in the log between fast and long running garbage collections.
    I urgently need help in solving this problem !
    What can I do ?

    After the exciting reply I did get on my question, we did some more investigations on the problem and it seems that we finally found the solution to our problem.
    The number of garbage collection threads used by the virtual machine defaults to the number of cpus of the machine.
    This is ok for small machines or machines where the main load is produced by the java application itself.
    In our environment the main load is not produced by the java application but oracle database processes.
    When java tries to do it's garbage collection using 120 threads (# CPU) on the machine which is already overloaded by non java processes, the thread synchronization seems to produce an exorbitant overhead.
    My theory is that spin locking is used on memory access, causing threads to spin while waiting for other blocking threads not getting cpu because of the heavy load on the system.
    The solution is now to limit the number of garbage collection threads.
    We did that on the first try by setting -XX:ParallelGCThreads=8
    For over one day with heavy load no long GC pauses were experienced any more.

  • Applying Software Installation Policy Is Taking Long Time During Boot Process

    1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
    time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
    I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
    GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
    GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
    GPSVC(34c.408) 04:03:30:109 GetMachineToken:  Looping for authentication again.
    GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
    GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
    GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
    GPSVC(34c.408) 04:03:30:109 Sync Lock Called
    GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
    GPSVC(34c.408) 04:03:30:109 Lock taken successfully
    GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
    GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
    GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
    GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
    GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:30:125 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
    GPSVC(34c.408) 04:03:30:125CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
    GPSVC(34c.408) 04:03:30:125 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
    GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:30:125 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
    GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
    GPSVC(34c.408) 04:03:30:156 Sync Lock Called
    GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
    GPSVC(34c.408) 04:03:30:156 Lock taken successfully
    GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
    GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
    GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
    GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
    GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
    GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
    GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
    GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
    GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
    GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
    GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
    GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
    GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
    GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
    GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
    GPSVC(34c.408) 04:03:36:531 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
    GPSVC(34c.408) 04:03:36:531 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
    GPSVC(34c.408) 04:03:36:531 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
    GPSVC(34c.408) 04:03:36:531CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
    GPSVC(34c.408) 04:03:36:546 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
    GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:36:546 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
    GPSVC(34c.408) 04:03:36:546 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
    GPSVC(34c.408) 04:03:36:562 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
    GPSVC(34c.408) 04:03:36:578 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
    GPSVC(34c.408) 04:03:36:578 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
    GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:36:578 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
    GPSVC(34c.408) 04:03:36:578 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
    GPSVC(34c.408) 04:03:36:593 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
    GPSVC(34c.408) 04:03:36:593 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
    GPSVC(34c.408) 04:03:36:593 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
    GPSVC(34c.408) 04:03:36:593 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
    GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:36:593 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
    GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
    GPSVC(34c.408) 04:03:36:625 Sync Lock Called
    GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
    GPSVC(34c.408) 04:03:36:625 Locktaken successfully
    GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
    GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
    GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
    GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
    GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
    GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
    GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
    GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
    GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
    GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
    GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
    GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
    GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
    GPSVC(34c.408) 04:03:36:843 UnLocked successfully
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
    GPSVC(34c.408) 04:03:36:875 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
    GPSVC(34c.408) 04:03:36:875 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
    GPSVC(34c.408) 04:03:36:875 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
    GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
    GPSVC(34c.408) 04:03:36:890 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
    GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
    GPSVC(34c.408) 04:03:36:890 Sync Lock Called
    GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
    GPSVC(34c.408) 04:03:36:890 Lock taken successfully
    GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
    GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
    GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
    GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
    GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
    GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
    GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
    GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
    GPSVC(34c.408) 04:03:37:312 UnLocked successfully
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
    GPSVC(34c.408) 04:03:37:328 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
    GPSVC(34c.408) 04:03:37:328 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
    GPSVC(34c.408) 04:03:37:328 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
    GPSVC(34c.408) 04:03:37:343 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
    GPSVC(34c.408) 04:03:37:343 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
    GPSVC(34c.408) 04:03:37:343 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
    GPSVC(34c.408) 04:03:37:343 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
    GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
    GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
    GPSVC(34c.408) 04:03:37:359 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
    GPSVC(34c.408) 04:03:37:359 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
    GPSVC(34c.408) 04:03:37:359 CompareGPOLists:  The lists are the same.
    GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
    GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
    GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
    GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
    GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
    GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
    GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
    GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
    GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.3a0) 04:03:40:546 Target = Machine
    GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
    GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
    GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.748) 04:03:59:296 Target = Machine
    GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(34c.748) 04:03:59:343 Target = Machine
    GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
    GPSVC(34c.3ac) 04:03:59:515 Target = Machine
    GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
    GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
    GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
    GPSVC(34c.3ac) 04:03:59:546 Async Lock called
    GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
    GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
    GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
    GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
    GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
    GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
    GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
    GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.3ac) 04:04:00:000 Target =Machine
    GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
    GPSVC(34c.748) 04:04:01:140 Target = Machine
    GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
    GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
    GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.3ac) 04:05:25:509 Target = Machine
    GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
    GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
    GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.3ac) 04:05:25:759 Target = Machine
    GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
    GPSVC(34c.3ac) 04:05:59:217 Target = Machine
    GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
    GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
    GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
    GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
    GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
    GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
    GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
    GPSVC(34c.360) 04:06:00:827 Target = Machine
    GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
    GPSVC(34c.360) 04:06:01:155 Target = Machine
    GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
    GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
    GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.360) 04:06:02:155 Target = Machine
    GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
    GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
    GPSVC(34c.da4) 05:06:16:856 Target = Machine
    GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
    GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
    GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
    GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
    GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
    GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
    GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
    GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
    GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
    GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
    GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
    GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
    GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
    GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
    GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
    GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
    GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
    GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
    GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
    GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
    GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
    GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
    GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
    GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
    GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
    GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
    GPSVC(34c.de8) 05:06:32:356 bMachine = 0
    GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
    GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
    GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
    GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
    GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
    GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
    GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
    GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
    GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
    GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Andy Qi
    TechNet Community Support

  • Pause during boot

    My pismo temporarily "hangs" at the end of the startup process. As soon as I see my desktop picture and date/time in menu bar it hangs for sometimes as long as an entire minute. This started recently and has been persistant for 2 weeks. I have not installed anything on here since there has been nothing new for OS 9.2.2 for some time. What is causing this?

    Aaron,
    Sorry I have nothing more specific to offer. If you wish, select the MacOS 9.2.2 ALL extension set, restart and test; if the issue disappears, then you don't have a problem with the MacOS software. Go again to the Extensions Manager > reselect your working set > menu bar > View and select "...As Packages". You can then see what extensions are associated with each third-party application and turn off each bundle, restart and test. The troublemaker should turn up with one these.
    If you still get the stall with just MacOS extensions (Base or All), try a startup while pressing the shift key (extensions off) and see what happens.
    Here is Apple's tech article on extension conflict testing:
    http://docs.info.apple.com/article.html?artnum=30929
    Or, head over to the MacOS 9.x Discussions and post your question. Be sure to include all your troubleshooting to-date.

  • SBOD and long pauses during safari browsing

    When surfing the internet I periodically get the spinning beach ball of death and it lasts for around 20 to 30 seconds. It seems like this shouldn't be happening considering I'm not running any other applications at the same time and not using much ram. Can anyone tell me what's going on? If something's broken I'd like to get it fixed!

    Welcome to the forums!
    Try this:
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Do you have enough RAM? Less than 1GB can cause slowness. Is your hard drive too full? Less than 15%, or 15GB, of free space can also cause slowness.
    Adding DNS codes to your Network Settings, should gives good results in terms of speed-up as well as added security:
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    (An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari

  • K7N2 Delta just built, won't boot!!!!!!

    Me and my brother just built our first computer. I doublechecked to make sure that all of the connections were right and when I turned it on the fans lit up and turned about half a turn, then everything went dead. Nothing on the monitor and nothing seemed to work except the fans. I am thinking that I either have a defective power supply or the jumpers are screwed up on the mobo. BTW, the other components are:
    -AMD Athlon XP 2500 Barton w/333 fsb @1.83 GHz
    -512 MB pc2700 ddr sdram
    -400 watt switching power supply
    -128 mb agp8x nVidia graphics card
    -52x/32x/52x lite-on cd-rw
    -3.5" floppy
    -40gb ultra ata hd @7200rpm
    -five case fans
    Any help would be appreciated.
    Also, I was thinking it was because the back of the motherboard is touching the metal chassis. Any thoughts? Thanks.

    This is a common thing when building a computer wheather its the first or on hundred.
    I usally means that the heatsink is on backwards or not setting on the proccessor right tilted to one side or other.
    Impossible to see when the board is in the computer and very hard when its out.
    Take everything except the cooling fan and processor off the board and remove it from computer.
    Now set it on a flat surface with the static bag that the motherboard came under it.
    Now remove the heatsink turn it over and look at it there is a step on one side that goes over the step on the processor mount they should both be facing each other.
    If its facing right than look at the inprint in the heat tape it should look just like the little heat contact point in middle of processor.
    If you must apply new heat sink greese make sure its nonconduitive if the greese you used before is the older kind be sure not to wipe it all over the processor as there is little tiny holes in the top that the greese can get into and short out the processor.

  • Losetup and mount during boot

    I want to use losetup to map a disk image file to a loopback device (dev/loop0) during boot.
    I would also want to mount this device as my home partition.
    The disk image is not located on the root partition, but on another separate partition.
    I can do this manually by using following commands:
    losetup --find --show /mnt/data/home-flat.vmdk
    losetup -o 32256 /dev/loop1 /dev/loop0
    mount /dev/loop1 /home
    The reason I need this, is that I have a dualboot setup (windows,archlinux) but also want access to an arch system via a virtual machine from within windows.
    So I basically have two arch-installations, which share a home partition(the disk image above).
    I cannot just map a real partition for the vm, because my disk has a gpt partition map and vmware currently does not support that.
    I've looked at creating a custom hook for this, but I am at a loss, especially because the disk image is itself located on a (ntfs)partition,
    which itself needs to be mounted before executing the losetup commands.
    Any ideas?

    Sorry for the delayed response.  I've been away from the computer all weekend.
    hungerfish wrote:
    Thanks for the help.
    I'm still using the init scripts, but will be migrating soon, so now I know where to look come the time
    Your solution however doesn't quite work, as I had to add
    mount /dev/loop1 /home/
    to /etc/rc.local instead of /etc/fstab , because (I assume) losetup hadn't finished by the time fstab gets parsed.
    This isn't ideal, but it certainly works, so again thank you for your post!
    Hmmm.   The "sysinit_premount" parameter to add_hook should have made this happen before
    /etc/fstab is even parsed.
    Can you show your /etc/fstab entry?
    Ok, I found that hitting scroll-lock pauses during boot/shutdown, so I was able to read:
    loop: Write error at byte offset xxx, length 4096
    Buffer I/O error on device loop0
    Buffer I/O error on device loop1
    JBD2 Error -5 detected when updating journal superblock
    This pattern repeats a few times, always at different 'offsets'.
    Maybe since the file is on an NTFS partition (I assume ntfs-3g?)  Perhaps it killed off the
    fuse module that kept NTFS volume mounted before unmounting /home, or removing the
    loop devices. Just a guess on that one.
    I have used the technique I describe before to pre-setup loop devices for old loop-AES volumes, and it
    worked for me.
    EDIT3:
    So I just had a really bad crash (running as vm), after which I needed to manually fsck and repair the filesystem on the virtual disk. So I guess I'm missing something... sad
    Is it possible you suspended the VM rather than shutdown before mounting on linux?  That might cause this.

  • K7n2 delta l boot screen

    i looked at other companies' similar nforce2 ultra400 mobo and found out that most of them have boot logo but mine doesn't have. even k7n2g has the feature. why doesn't k7n2 delta? i've search the bios (latest) for the corresponding setting but with no avail. tell me how to enable it!  
    amd athlon 2500+ barton
    msi k7n2 delta l
    nvidia tnt2 m64   (my friend's. will get radeon 9600xt later)
    256MB

    Hi,
    Am I the only person round here to consider this a non-issue? This is the second time I've seen a thread about this in the last couple of weeks!  
    As far as I'm concerned the MSI "Splash" screen is nothing but an advert for MSI. Most of us at some time or another, complain when we're forced by advertisers to view their latest ads, whether it's on billboards, TV, magazines or elsewhere! But not it seems, in this case!
    If it was something worth looking at - like a nice young lady or an Ansel Adams landscape then fine   - but the MSI logo - no thanks!
    The minute I saw the MSI splash, I immediately went looking for the option to switch it off, and it's been like that ever since! (the small logo option too). I for one would rather see what is happening on the initial bootscreen!
    Then again, when I do boot I don't usually hang around to watch it - it takes so long I can be doing other (more important) things!  
    Am I missing something here? Because I can't for the life of me figure out why this could possibly important to anyone?!  It just sits there for a few seconds then disappears!
    Quote
    i want to have somthing nice during bootup to show to my friends  
    Eh???  
    I'm sorry friend but your gonna have to give MSI more reason to spring into action than this!  
    Quote
    is msi going to develop a feature like personalizing bootup logo?
    many companies have that now.
    Actually, you've been able to do this with many motherboards for a good few years now, but I don't think it's at the top of MSI's priority list!  
    But.....who cares??  
    Axel  

  • HD or Booting problem on MSI K7N2 Delta 2 Platinum

    Hi all,
    Ive a weird issue which i cant figure out myself. I've 2 HD's..lets call them A and B where A = 60Gb (Master) and B = 80Gb (Slave)
    It's is like this:
    A and B are connected to the primary IDE-slot. A will boot when set as Master and B wont start booting when set as Slave mode (i mean, it wont show/appear in the first hardware (detection) bootscreen of yer BIOS where it says its present or the so called POST-screen), but if I set B as Master only (A turned off) it will boot.
    What also happens is if I disconnect the power of drive B..drive A will boot..and while OS is loaded...I turn on the powercable from drive B and reboot..suddenly out of the blue it detects both HD's and reboots like it should do normally...but when i reboot from than..the same thing happens again..(it wont recognize B anymore)
    Sumtime it regonizes both drives and sumtime it just won't and sumtimes just 1 drive..
    Another thing, when it won't recognize one or sumtime both drives...the POST-screen gets stuck at the name and version of the BIOS...and where it says: 'detecting IDE drives...'  when it is at this stage..and I press  on the DEL-key for example..it's loading damn too slow..I've to wait about 10min before it enters the BIOS-setup..
    I am 100% sure I set the jumper correctly for Master or Slave mode on my HD..I know there's sumthing wrong..but don't know where...Ive changed the jumper with a new one  ..switched IDE-cables...switched HD's (set B as Master and A as Slave and vice versa, knowing there is no active partition on B..but only to check if it recognizes the drive)..in all cases..the BIOS settings are set as default!
    any1 can help me out with this?
    It worked smoothly on my system till i noticed my second MEM bank of my mobo broke (Asus A7N8X-E)..so i had to change it quickly (and went to the store with my warranty to fix this board..it was only 3 months old) ..since I've seen/had enough Asus mobo's in my life I went this time for an MSI which looks better in my opinion...so now i have an MSI K7N2 Delta 2 Platinum..it works fine...except that HD issue mentioned above
    any help would be appreciated..thnx in advance!
    cheers!

    Hi,
    I've done that already several times...it doesnt work..any other suggestions?
    Now I can boot normally when I disconnect the power of the 2nd HD (or just any HD)...when the os is loaded...I turn back on the power of the 2nd drive and reboot...than it will run/boot/restart etc..normally...this is the only workaround I have at the moment...this only works when the system is turned a long time...
    My power supply is 400W..so I don't think Ive any prob with that
    cheers

Maybe you are looking for

  • Can not delete data from table which is queried in my stored procedure

    Hi, Anyone knows how to fix it: I have a table. In a stored procedure, I have a simple query running on this table. When I want to delete one record from that table, I got error message: ORA-04091: table *** is mutating, trigger/function may not see

  • How to Raise alert in XI when a new file reaches application server

    Hey guys i have a requirement in which i need to trigger a piece of  ABAP code whenever a new file reaches a specific directory of Application server. i m using File adapter on receiver side and i want to raise a trigger so that the ABAP code is exec

  • How do you get rid of Blue Highlighting????

    I just purchased Adobe Acrobat 9 Pro. When you use the bookmarks, you then have to click back onto the document page if you want to do anything with it, such as change the zoom. When you click on the page, it turns blue. I HATE that!!! How can I get

  • Margin not the same as in browser

    I have a site created as this : <div id="container"> <div id="header"></div> <div> id="content">my content goes here> <div id="leftcolumn">links and things go here</div> <div id="rightcolumn">links and things go here</div> <div id="footer">my footer

  • Kernal patches not updated

    Hi All, I updated latest kernal patches in my system but it is not showing latest kernal patch no. What is the problem. Regards Siva