K7N2 Delta. Turns on for a second, then shuts down

It just stays on for a second and then shuts off

i wish i could read minds on distance.
post amps on the 3.3v 5v and 12v rails on the psu.
is written on a label on the psu.
then post ALL your hardware.
cpu memory harddrive cd and so on and also what you have tried so far

Similar Messages

When I open my newsstand, it only stay open for a second then shuts down. It started after I updated my software to 6.0. Any suggestions for how to fix this?

When I open newsstand it only stays open for 1 second then shuts down. This started happening after I upgraded to 6.0. Any suggestions for how to fix this?

Try quitting Newsstand completely - double tap home button, delete it from the multitasking shelf - then launch it again.

B757e powers up for 2 seconds, then shuts down.

I don't know if I am in the right section, but l have a B575e .
I left it on sleep for about 4 days, when I opened it today, it was Off.
I tried to power it up, but it only comes on for a second, then shuts off.
I tried charging the battery, and tried to power it up with the charger connected.
Also tried removing the Battery and using just the charger.
Still same thing. I brought it used, so I don't think it is still under warranty.
The PO said it was only a year old or so, and had only used it a few times.
It was working fine up till this point.
Any Ideas?
Thanks,
Tony
Solved!
Go to Solution.

OMG it worked, what is that some kind of re set?
What happened? Should I not leave it on sleep for 4 days or so?
Booted up, seemed to take a little longer, IDN if it's related?
Seemed to hang on the sign in screen after entering password.
It wants me to up grade Free to windows *.1 should I do it. It already has windows 8 in it. 8.0 I guess, l am not sure.
Thank you for the help, I take treatments mon and tues, and I like to have the lap top there.

My computer will turn on for a second then shut off.

I had just shut down the computer 30 min before so when i go back to turn it on i press the on button sounds like its starting up then shuts off it has a full charge took out the battery and tried it again. still doesn't work i kept try to turn it on and on but itll just act like its starting up then shut off. sometimes if i let go of the on button too early the light will just come on then immediately shut off. what do i do everything i own thats apple has been breaking this week.

- If it is only one app try deleting the app and then redownload/install the app.
- Reset your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore your iPod. First from backup and if problem persists restore to factory defaults/new iPod.

MBP 15" starting up for a second then shutting down. Fan whirring.

Hi there,
My MacBook Pro is refusing start up. The laptop is out of power. When I plug it into the mains adaptor i can hear, for about a second, the fan begin to whir. This is accompanied by the light on the front of the laptop turning on. Then suddenly there is a quiet click and it quickly powers down and the light flicks off. Then the fan begins to start again and the whole process repeats itself. This just continues to happen whenever the power adaptor is plugged in over and over again. It makes no difference if I close the laptop or leave it open, or if I press the power button whilst this happens. The screen stays black the entire time.
Until an hour or so ago the laptop was working absolutely fine. I was just browsing the internet with it when it ran out of power and as soon as I plugged it in it began to do this. The laptop has run out of power many times before so I don't understand why this is an issue. I would call AppleCare, but for some ridiculous reason apple support isn't open on Sundays.
I bought the laptop in February this year, it is on snow leopard. I've had no serious problems up until now, and not noticed anything awry today.
Any help would be greatly appreciated on this, has anyone had a similar problem?
Thanks a lot,
Alex

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Why does my macbook pro turn on for two seconds then off?

my mcabook pro only turns on for couple seconds then off. How do I get it to work ? i have important files on there.

Boot to Recovery and try repairing the startup disk via disk utility
OS X: About OS X Recovery
an you start in Safe Mode?
OS X: What is Safe Boot, Safe Mode? - Apple Support
Try reinstalling the OS. This will not delete anything. The following works for Yosemite too
OS X Mavericks: Reinstall OS X
Also,
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

Check to see if there are Updates available... If already up to date...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

"Reader" will only display a PDF for one second, then suts down the PDF.

I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF. This happens to all PDFs no matter what the scource. I am running Windows 7. What do I need to do to correct the situation. (Yes -- I deleted "Reader" from my computer, the re-installed it. Didn't help.)

Go to C/Programs/Adobe/Reader 11/Reader.
Look for a file named eula.exe (or just eula).
Double click it.
Accept the license agreement.
Reader should work fine from there.

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium

I click Mail, it opens for 2 seconds, then closes down to main menu?!?!?

I have searched and can't find this answer.
I suspect it has something to do with my home computer and iphone together.
I click on MAIL it goes to MAIL for 2 seconds, then it shoots back to the MENU page of my iphone - can anyone tell me how to stop this?? This is my last resort!

Hi,
Try forcing the Mail app to close and then launching it again. This article: http://support.apple.com/kb/TS1445 will walk you through forcing an app to quit.
If the issue persists, try restarting the iPhone by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again.
If its still happening, you can try removing the email account from the iPhone and then adding it again or restoring the iPhone.
This article: http://support.apple.com/kb/HT1414 will walk you through restoring the iPhone.
-Jason

K7n2 Delta power on for 1 second problem

I have owned a MSI k7n2 Delta motherboard for just over a year, and it has worked fine.
Just recently i decided to clean my computer after coming back from university, where it had gotten a little dusty.After cleaning it i plugged it all back in and powered it on. The power came on for about 1 second and then went off agen.The PSU fans came on, the CPU fan came on, but then it all just stopped after about a second.
I have tried a different PSU also, and still the problem is the same.
I also attempted removing everything then re-building, hoping this might fix something, but still the same problem.
I have taken the CPU out and booted the system, the system beeps and stays on, the D-LED at the back signifying that the CPU is damaged or not installed, which is correct, but on replacing the CPU, the system again powers on and then off.I've tested the RAM, both modules, one module and switched DIMMs, but still the same problem.
This is a very odd problem after a year of my computer working fine, i can only assume that i have damaged a component during cleaning, but im not sure whether the CPU,Motherboard or RAM is damaged.
I dont suspect its the RAM, otherwise the computer would hang on power.
Any suggestions would be thankful ?
Specs:
AMD-Athlon XP2600
MSI K7N2 Delta
2x256 Crucial 2700 DDR
Radeon 9600 GFX
80Gb Seagate
120Gb Seagate
2x CD/DVD/RW Drives

Someone else had that problem here a few days ago, he found mobo knackered, did you ground your self when cleaning? When cleaning you must be grounded the easiest way is to leave power cord plugged in with the mains switched off!! Press power button on case to discharge psu, then hold or touch the side of the case regularly while cleaning. I WOULD DO REBUILD FIRST YOU MAY HAVE MISSED SOMETHING.

My I pad only turns on for a second then runs out of battery again

So my ipad ran out of battery so I connected it to a wall charger. It re-boot but the lock screen flashes for about a second then runs out of battery again. I have tried well over 20 times to fix it but nothing worked. Any suggestions?

Not charging
1. Reset iPad; hold the Sleep/Wake and Home button down until you see the Apple Logo
2. Try another wall socket
3. Try another cable (make sure it's an original Apple cable)
4. Try another charger (make sure it's an original Apple charger)
5. Clean Lightning port with compress air or new paint brush

Hi, I have a problem with my Macbook, whenever I close the lid, it sleeps normally, but then, when I open it, it turns on for about a 1/2 second then shuts down. Then, when turning it on, I have to hold the power button, or it stays off. Please help!

My Macbook shuts down when I put it to sleep.

I would try each of these in order seeing if the problem is solved after each:
1. Resetting your Mac's PRAM and NVRAM and Intel-based Macs: Resetting the System Management Controller (SMC).
2. Boot into Safe Mode, then reboot normally.
3. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
4. Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Z77A-G45 i5 3570K- Boots for a second then shuts

Basically all of the fans come on for 1/2 a second then shutoff and same thing over and over I made sure EVERYTHING is plugged in so thats not it....My understanding is that I have to update the bios? but how do I do that if I cannot get the computer running?

I actually had the same problem... I did a complete test of all my parts... but came to nothing... i dropped my rig a a friend's place and it booted without any problem...
When i got home it started doing the same thing again...
Turned out the problem was with my power outlet... though i cant understand why cos i've always been using that sam one..

Iphone 3g shows Apple screen for a few seconds then shuts down

Hey everyone, I've searched all over for a fix for this, but can't seem to find anyone who has had this problem answered. I was away for a while and didn't use my phone, when I got home today it froze up two or three times, so I put it into recovery mode and went through the normal steps of restoring from my last backup no problem. The phone seemed to backup fine and got was syncing my music/photos/etc. and I decided to go for a run. I came back 45 minutes later and it was shut down and not doing anything. When I went to restart it the black and white Apple logo screen popped up like normal for about 15-20 seconds then it shut down. It continues to do this no matter what I try. The only issue I can think of is that the battery was really low when I plugged it in for the restore, but it made it to the sync portion without a problem, so I'd assume it should have been charging.
I've gone through all the recovery/restore steps I can find on the net. I've tried removing itunes from my computer and reloading it, both just with the application only and then all the correlating files. I've tried restarting about 15 times, plugging into different USB ports and even using my brother's powerbook to restore it. When I plug it in it recognizes that it's plugged in and the boot screen comes up, but it shuts down before it's recognized by itunes.
Has anyone had this problem and overcome it? Does anyone have any input other then referring me to this page: http://support.apple.com/kb/HT1808 or trying to put it into DFU? It's out of warranty and if at all possible I'd rather not buy a new one. Thanks in advance for your help.

I guess, putting it in recovery mode and restoring it "as new phone" is your only chance if you can make it. Restoring from a backup may copy corrupt files back to your phone, causing this problem.

K7N2 Delta. Turns on for a second, then shuts down

Similar Messages

Maybe you are looking for