K7N2 Delta2 : mbprobe question and tweakui question

two questions:
1) I installed temp monitor drivers for mbprobe using the winbond drivers that go with the software. the only temp i am able to read or put out is the mobo temp, my question is if there was something i overlooked on the mobo drivers cd that came with it, or do i need a diff driver than the one i installed?
2) TweakUI question, i dunno if this is releated to the mobo or not, but i just came from a rev 1.03 asus a7n8x-dlx mobo and this never worked correctly with it either, i've reinstalled windows on several occations and never had this work correctly, the problem that i'm having is that under the auto-logon check-box, it unchecks itself after every windows boot, is there a setting i need to change so that it stays checked? i dunno what i'm doing wrong, all the other settings in tweakui remain even after reboots, so i couldn't figure out i was doing wrong
thanks in advance for any help you can give me

Never used mbprobe.  Google speedfan.  Discussion here.
Auto logon is not a mobo issue.  Try this instead of the auto logon in tweakui.

Similar Messages

  • Oca questions and dumps questions

    Hi
    OCA questions and dumps questions
    Thanks

    It is against the policies of Oracle Certification to provide brain dumps to Oracle exams.
    If on the other hand, you want test prep advice, you can find the details on Oracle Education main site under certifications.

  • ILife 08 to 09 iWeb question (and a question about DW while I'm here)

    I was thinking of upgrading to iLife 09 for just a couple of reasons:
    (1) The iPhoto face recognition feature looks cool and I want to try it. I have tens of thousands of photos of friends from nearly 30 years in my iPhoto and it might be fun.
    (2) I basically like iWeb 08, but hate the way it deals with multiple sites. I always have to publish everything, but in iWeb 09 it looks like I can single out just a single site for publishing, even via FTP. is that right?
    Recently I also acquired Dreamweaver because of some work I'm doing for a company. But I find I can't even do basic simple things, like drag around text or insert a web widget (some HTML in a box) to move around and position - like I can do in iWeb.
    Are things like that possible in Dreamweaver?
    I can't even figure out how to add new text somewhere on a blank page in Dreamweaver. And everything I create looks boxy, plain and clunky. I am obviously not a web designer - I am a web application programmer.
    With Dreamweaver I feel like I stepped into some 20th century web authoring tool. With iWeb everything I create looks nice even though I have no artistic talent myself.
    doug

    I don't mind publishing to a folder and uploading using my FTP client, but it seems I have to publish ALL the sites each time to the folder and then just upload the one site's folder I was editing. So it takes a long time each time I publish to the folder. There is no way around that, is there?
    About my DW question, it was "in comparison to iWeb". If I asked in a Dreamweaver forum if DW could do this thing that iWeb could do, somebody would probably say, "Why don;t you ask your question on an iWeb forum?"
    Thanks,
    doug@hoping this discussion doesn't digress into whether I should post my question here or not

  • 1 more newb question and 1 question just to ask it

    Hello again everyone, i just have a couple more questions, i know Safari is a web browser but am i correct in assuming it is a high-speed/broadband-like web-browser? I am currently using AOL high-speed broadband on my PC but i dont plan on using aol when i switch to mac, so will safari just take my current high-speed connection and use it just as fast as Aol was?
    also, in debating between the $2,000 macbook pro and the $2,500, the only unupgradeable difference i can see it the video card being a Radeon X1600 128 or a Radeon X1600 256, now i plan on playing games on it, but it there that big of a difference between the 128 and the 256?
    THANKS IN ADVANCE ALL
    Sony   Windows XP  

    Hi, TheMacNewb.
    You wrote: "also, in debating between the $2,000 macbook pro and the $2,500, the only unupgradeable difference i can see it the video card being a Radeon X1600 128 or a Radeon X1600 256, now i plan on playing games on it, but it there that big of a difference between the 128 and the 256"If you are a "gamer" — especially if you play 3D games —   then you want the MacBook Pro. See this May 2006 review of the MacBook in Macworld.
    If you purchase a MacBook Pro, I'd opt for the fastest/largest VRAM graphics card available, i.e. the "ATI Mobility Radeon X1600 with 256MB GDDR3 memory."
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Multiclip multi questions (audio question and syncing question)

    I have two questions concerning multiclip editing:
    1. How do you select the audio from one angle to remain the audio throughout as opposed to the audio track changing every time you select a different video source?
    2. If one camera in a three camera set-up stops recording for a technical issue and then goes back up, is there a way to sync both of those files to one angle of a multiclip? If not, is there a way to make them separate angles and sync via input on three angles and on output for the fourth angle?
    Thanks in advance.

    1. In the Viewer's Playhead Sync Menu (upper center), select "Video"
    instead of "Video + Audio".
    2. Sorry, neither of your ideas will work. Multiclips work with actual media
    clips, so two clips will be two angles; and the sync method (in, out, timecode)
    is the same for all clips.
    I suggest you assemble the two files from the camera in a sequence (using
    identical settings as the clips), sync them up exactly (with a little space
    between them), and export them using the same settings to make a new clip,
    which you can then import and use for your multiclip.
    Have fun!
    Les

  • Answers to a question and another question

    Have just started using chat beta app for imessaging from my mac to iphones.
    a lot of people have had issues syncing properly between devices, which i had as well.
    by syncing i mean:
    at the moment on my iphone all messages from 'dave' are in a single conversation. if dave was to imessage me from his mac, his message would show in a different conversation because its come from his email address instead of his phone number. even if i add his email address to his contact it will still show in different conversation. which is very annoying because i want all my conversations with dave to be unified regardless of where they were sent from.
    some people have suggested that the answer is to change the caller ID for imessage from your phone no to your email address.
    my problem with this is that all your imessages from your iphone to other iphones will show up as your email address instead of your phone number on the recipients phone, which i don't want and im sure a lot of people wouldn't want.
    anyway in case people are looking for a solution (as i was for ages) i came across a possible one which seems to work:
    delete all existing conversations from that person on both your phone and reciepients phone. from then onwards all messages sent between those 2 people will show in same conversation rather then 2 different ones regardless of where they are sent from.
    i have tried this with wifes phone and after deleting existing conversation on both our phones, all messages i sent her regardless of wether from my iphone or mac all shows in same conversation.
    anyway thats my answer to a possible problem, i also have a question:
    what is the future of messages beta? its a excellent idea, however makes no sense at all if it doesn't sync PROPERLY across all your devices which at the moment it doesn't. surely apple can identify you purely from your apple id, so i can't see why they can't get imessages to sync fully, so all imesseges sent to me and those i send as well all show up on both my phone and on mac.

    Hi,
    Currently Mesages Beta is storing your Messages from any source in two places.
    By default it is saving iChat style transcripts in Your Home Folder/Documents/iChats (this is the default place for the ichats folder)
    It is also storing, at least iMessages, in Your Home Folder/Library/Messages in the form of a data base.
    It seems to be this data base that show you the "History" of the contact you is chatting with you.
    (This can only be accessed by using the Finder's Go Menu and holding the ALT key to be able to select the Library)
    It also seems unclear as to whether it is the Address Book details or something at the Apple Server end that links Phone Numbers with IDs that allows the linking and syncing of the two forms of ID.
    The fact that you have found that clearing all the History of all IDs conversations allows better syncing is interesting.
    As I see it several things need to be considered
    Not only iMessages from Phone Numbers and Apple IDs need to be resolved for syncing but also whether people want the iChat type Buddy list chats to also be collated in that process.
    If iMessages are kept separate from the older iChat style chats in terms of syncing chats on the Mac end there is still the issue of whether Jabber and AIM Chats should be "synced" or collated for the "History" view.
    As I have several Buddies with History at least on AIM chats going back to 2004 and later jabber Chats with some of those it would make for a very long scroll back.
    There would appear to be a syncing issue with iMessages regarding the Name or Phone number that needs to just work and not need all chats to be closed and cleared to then sync  (or if closed/deleted a way of getting one you want to keep back or stored for review)
    A way of deciding what and how much "History" is called back for a Buddy or contact.
    The fact that all Saved Chat for a Buddy will show up does mean you have a useful search tool for certain things.
    However I rarely use Saved Chats for much more than that after about 6 months.
    Spotlight would tend to find it anyway (in the current Storage place)
    If History/Archives of chat are going to be kept in the Library then Spotlight will not be able to Search them.
    Messages will be in Mountain Lion.
    And for that we will have to wait.
    9:23 PM      Thursday; May 17, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Flapping circuit question and loopback question...

    Two questions)
    1) If someone reset a pc or cable modem will that cause the circuit to flap (as shown below)?
    054396: Oct 21 19:51:24.288 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to down
    054397: Oct 21 19:51:25.289 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to down
    054398: Oct 22 04:11:50.740 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to up
    054399: Oct 22 04:11:51.776 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to up
    054400: Oct 22 04:12:29.280 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/25, changed state to down
    054401: Oct 22 04:12:30.308 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/25, changed state to down
    2) Does this mean someone plugged a loopback adaptor into a switch port?
    020561: Oct 20 02:21:12.212 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to up
    020562: Oct 20 02:21:14.004 PDT: %ETHCNTR-3-LOOP_BACK_DETECTED: Keepalive packet loop-back detected on FastEthernet0/12.
    020563: Oct 20 02:21:14.004 PDT: %PM-4-ERR_DISABLE: loopback error detected on Fa0/12, putting Fa0/12 in err-disable state
    020564: Oct 20 02:21:16.048 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to down
    020565: Oct 20 02:21:43.196 PDT: %PM-4-ERR_RECOVER: Attempting to recover from loopback err-disable state on Fa0/12
    Thank you,

    Thanks for your reply....why would a fe connection go up/down just suddenly then never again (as of yet)....could it be a slightly loose cable that got bumped or due to vibrations?
    098422: Oct 24 00:50:15.227 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098424: Oct 24 00:50:25.225 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098425: Oct 24 00:50:30.303 PDT: %RTD-1-LINK_FLAP: FastEthernet0/1 link down/up 5 times per min
    098426: Oct 24 00:52:37.483 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    098427: Oct 24 00:52:37.821 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
    098428: Oct 24 00:52:41.693 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    098429: Oct 24 00:52:42.535 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
    098430: Oct 24 00:52:44.640 PDT: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up

  • 16:9 question and 24p question

    I shot some footage on a Canon xl2 in 16:9 and in 24p.
    Regarding the 16:9. I was wondering how to show 16:9 footage on a 4:3 TV with out it getting streched. Can this be fixed in post?
    Also regarding the 24p. the Canon XL2 records in 24p then it uses 2:3 pulldown to record to tape (in 60i)
    What is the best way to caputre this in Final Cut Pro HD?

    DVDSP implementation of 16:9 is clunky in that you have to set the 16:9 settings all over the place (menus, tracks, project, etc.) So be careful. The manual has a lot of information on this subject, to be sure. I'd set everything in DVDSP to letterbox, by the way, not panscan (which is just a crop unless you somehow have encoded pan-scan vector info into your build) unless you've specifcally protected for 4:3 in your widescreen shoot.
    Make sure you set your DVDSP simulator to 16:9 so that you can double check everything with some confidence before you burn.
    Don't worry about setting up the DVD player - almost all commercial movie DVDs are anamorphic so most people's DVD players are set up correctly - you just choose the type of TV in the DVD player setup menu and the letterbox is automatically applied if it's set up for a 4:3 TV (do you still use those 4:3 sets over there in the US?)

  • Secure boot question and user question

    would it be safe and possible to say install just the boot partition to a 32mb sd card keeping everything else on the main hard drive? maybe having the /root on a USB drive to avoid anyone using su to get to it and making it accessible for emergency purposes. i would also encrypt my home folder.
    does the above sound like a viable idea? and i am assuming so long as i install the card reader drivers during the initial setup i can just dd /boot/ over to the sd card.
    also on my arch installs i installed sudo and added my username to wheel which i gave all permissions with password. this should be safe and i should never need to actually su to root correct? or are there some advantages to su to root?

    I'm guessing you might have seen something like this?  I wanted to try that myself, but it apparently only works if your card can be picked up by the mobo as an internal drive.  Supposedly there's a way to hack or flash certain brands and models to achieve this, but I haven't looked into it in a while.  My card reader uses a USB internal connection, so it can't be used as-is: on boot, my BIOS searches only the selected source for the necessary files, so I can't have /boot on /dev/sdb grab the initramfs from /dev/sda1.  It could be entirely dependent on you board and BIOS, or may require extra work, but it's possible.  You'll just need to do some work to get the info for your machine.

  • WRT54G Firmware Question and Another Question If You Can Help...

    What do i do with the Firmware? I downloaded it to my computer and i dont know what to do next Can someone help?
    Also, When I try using the wireless router, the green bars are full but i cannot connect to the interet.
    Oh, and one more thing. When i plug everything into the Router the Power button and the WLAN lights stay on, but the Ehternet and Internet lights flash. Is this suppose to happen?
    If you have any ideas or suggestiosn, i am open minded THANKS!
    Message Edited by Celibonk89 on 06-21-2007 11:09 AM

    well you need to logon router's setup page, open I.E. and inthe address bar type 192.168.1.1, it would ask for username and password, put "admin"(default password) of router... go to administration tab >> firmware upgrade >> browse for firmware file and upgrade it, reset the router and reconfigure it according to ISP settings...
    ethernet and wireless lights are blinking staht indicates router is communicating withe wired connection as well wireless connection.

  • On my iPhone i am trying to download a song on iTunes and it is asking to answer sercuity question and so I answer them and it saying my answer are wrong what do I do?

    I am trying to download music onto my phone and it is saying I need to answer sercurity questions and the questions they are asking I have never answered before therefore I don't know the answers and so when I put the answers I think it is they are wrong I don't know how to fix this I answered the questions twice and so I need help to answer them as I don't want to lock my phone please help me

    Not Possible...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    Good Luck.

  • Where can I get a script  to submit questions and answer them?

    Is there a script out there that works like this?
    Visitor asks question on website, goes to Admin section. Admin answers question and now question and answer are posted together on the front page. Front page is constantly updated with these answered questions, newest on top. Search on top should search all of answered questions.

    It wouldn't be a script. You're asking about a whole category of functionality, including training the person who answers the emails.
    This could be implemented in a variety of ways, with a variety of capabilities, and with a variety of requirements and levels of efficiency. The choice you use will depend a lot on the hardware you're running on, the server and tools you use for your existing site, the amount of activity you expect, etc.
    If you're using an existing, well-supported application server and web development environment, then I expect that what you're asking for could be built within it pretty easily. It might even be available pre-built. But it's not like there's some generic "q/a tool script" in fifty lines of Java code that you can just dump on any web server and have it work magically in all cases.

  • [SOLVED] K7N2 Delta2-LSR Everything works but OpenGL Apps.

    Hello Folks.
    Interesting problem I have never run into before.  Recently upgraded to the K7N2 Delta2-LSR MB, and everything works great except for any opengl based application, which just crashes out.  But first a list of the system specs, then a detailed explaination of everything I have done.
    MB: K7N2 Delta2-LSR
    BIOS: Award vB.6 (11.6)
    CPU: AMD Athlon 1333Mhz (Don't know which core, sorry) 133MhzFSB x10
    RAM: (2) 256M DDR266 (No brand name, Samsung memory chips)
    (Dont have memory timings handy, but will get if needed. Using By SPD in bios)
    Video: Chaintek GeForce 6600GT (nvidia gefore 6600gt chipset)
    PSU: Logisys Computer PS 550A-BK 550w (+3.3v/30A +5v/38A +12v/25A)
    HDD: IBM 20GB IDE (Can get full on model if needed)
    Audio: Sound Blaster Audigy2 ZS Platiumn (removed during testing)
    OS: Windows 2000 SP4 (Fresh Install, latest MSI MB drivers from support site)
    Okay i think that is all the relavent system specs, if anyone needs more I will be happy to provide.
    Software used to test:
    Direct3D: Rose Online (game), dxdiag 3D tests
    OpenGL: Doom3 (game), Luna (nVidia Demo), Nalu (nVidia Demo), Dusk (nVidia Demo), Windows OpenGL screen savers
    The Issue:  OpenGL application crash during startup, normally in the nvoglnt.dll file.  System completely stable otherwise.  Windows 2D applications work fine.  Direct3D applications work fine.  I am using the latest stable nvidia drivers 84.21.  I have also tested with the following previous driver versions 81.85, 81.95, 81.98 and with the beta drivers 84.25, 84.43, 91.28, 91.31.  During this test I also used a MSI 6600GT card from a known good working system.  Putting the Chaintek in the working system, verified the card was good.  It worked no problem.  Putting the known good MSI card in place of the Chaintek in non-working system, OpenGL applications still crash.  I believe at this point I have ruled out both video card and drivers as a culprit.  I have a clean install of Win2K SP4 on the machine with latest MSI MB drivers.  I have also tested with a clean install of WinXP upgraded to SP2, with latest MSI MB drivers, Same Result.  The ram I have tryed in both Single and Dual channel modes.  I have removed one stick and ran the system with just 256MB ram.  I also swapped that stick with the other one per chance it was one of the ram sticks.  Though they had been running fine previously for years in the system without incident until the MB upgrade.  Also if I had bad ram I would expect to have general system instability across the board, not just opengl apps.  As a last resort I hung the HDD off my known good working system, even though it has an ASUS nForce2 chipset MB.  When it booted up,   All applications ran fine. DIrect3d and OpenGL.  At this point in the game I feel I have ruled out software and video drivers as the culprit.
    I've never really run into a problem like this before and am beginning to suspect that something is wrong with the motherboard itself.  I just wanted to bounce this issue off the brainpower here at the forums, before I contact the place I bought it from for an RMA.
    So I guess this all boils down to is, has anyone else ever had this issue and resolved it?  Or, does anyone have any other troubleshooting ideas I can try?  Thank you for all your time and consideration in this matter. 
    Kershoc

    Quote from: Richard on 09-June-06, 09:35:53
    BOSSKILLER,
    I agree but first we need to get APIC enabled with a Fresh Install of WinXP.
    Richard
    yes APIC must be enabled and OS installed after it. my reply was add-on after yours.
    Quote from: Kershoc on 09-June-06, 09:36:23
    Richard,
    The install is already on its way.  The XP install has an option for a quick format, so it's not as long as if I did a full one (thank goodness).  I've got a copy of memtest86 on one of my diag cd's around here.  I'll go ahead and let that run overnight when I go to bed.
    Bosskiller,
    It is BIOS version B6 aka 11.6.  It came on the board by default.  I dont recall seeing an Nvidia/ATI speedup option, but it may be one of those hidden ones you have to press a series of hotkeys to see, so I will check.     I will let you know more, once this reinstall is completed.
    yes Nvidia/ATI speedup option is hidden("SHIFT+F2","ALT+F3")
    "I'll go ahead and let that run overnight when I go to bed."
    hmm not good idea, couse that will take alot of time which is no need really, make 20 passes on Test Number 5 only in memtest, then leave SP2004 or Prime95 (Large'FFTs in Blends).
    But at all think there is not instability issues or you may have it but that is not couse the your problem. becouse instability is random, you are already running Direct3D base application and problems must exist there also if you have big instability, but that is not happend. if stress tests detected instability issues than will mean that you have more than one problem.

  • New K7N2 Delta2 Platinum crashes with new memory

    I recently bought a new K7N2 Delta2 Platinum motherboard and 2 x 512MB DDR400 OCZ memory, and now my machine continually crashes.
    I've tested the memory sticks individually using memtest, and there are no problems with the memory. However, when I was in touch with OCZ support, they mentioned that there is apparently a problem with the nForce2 chipset being able to handle new 2 x 512MB memory. I had my motherboard working successfully with old DDR400 memory (BH5-based), which I sold when I bought the new memory. I was pointed to this site by OCZ support:
    http://www.bleedinedge.com/forum/showpost.php?p=30004&postcount=7
    Is this the case?
    If so, I'm surprised to see that MSI (or any manufacturer with nForce2 chipsets) can claim up to 3GB support. Comments?
    Apparently, one thing to try is 2T command rate, but I can't find where to set it in my BIOS. I heard that it's probably set to 1T by default on my board.
    Can anyone suggest any other options?
    I'm somewhat frustrated that I've bought a new board and pretty expensive memory, and now have an unstable system. It's also too late to return to the reseller.
    Any help would be appreciated!
    Thanks.
    Stuart.

    Quote
    I've tested the memory sticks individually using memtest, and there are no problems with the memory
    Did you also test them together?  If not, do so. Then up voltage as suggested.
    Do you have them in dual channel, i.e one green slot and one purple slot?
    Quote
    Apparently, one thing to try is 2T command rate, but I can't find where to set it in my BIOS. I heard that it's probably set to 1T by default on my board.
    That is correct; it is set up for 1T and can not be changed.
    Not true that nforce2 chipset has problems running 2x512MB but it is notoriously picky.  Your board tends to under-volt the memory too so you may be OK after increasing the voltage.
    You don't say what bios you are using but bosskiller's modded bios b.72c has produced good results and addresses memory issues.
    Read < here >

  • K7N2 Delta2 Does not Post Every Other Boot

    I have built a PC with a K7N2 Delta2-LSR mb and it fails to post on every other boot.  When it does post, everything works fine.  It makes no difference whether the boot is warm or cold, and it does not vary in frequency (it is always every other boot).
    Any ideas?

    Hi, I have the same problem.  (sorry for my english)
    When i switch on my pc, nothing hapend.... freeze.... The power led and the hdd led on and the screen stay off.  I need to unplug the power wire and then plug it again to turn on the pc.  
    Thanks for your time.
    K7N2 Delta2 MS-6570E (v1.X) - BIOS Phoenix - AwardBIOS v6.00PG - Version : Nvidia - 42302e31
    AMD XP 2700+ BOX - FSB 333 (with original FAN COOLER)
    512mb DDR333
    BIOSTAR G-FORCE FX 5200
    1 HD S-ATA  - Western Digital WDC WD800JD-00HKA0
    1 HD IDE    - Maxtor 6E020L0
    1 DVD IDE   - Sansung SD-6125
    1 CD-RW IDE - SONY CRX230ED
    PSU: BISWAL ATX 400w - KC-EAA
      +12v  15 A
      +5v   25 A
      +3.3v 20 A
      -5v    1 A
      -12v   1 A
      +5VSB  2 A
    OS: XP Pro SP2
    ----------------------------- EN ESPAÑOL
    Hola, tengo el mismo problema. Cada vez que reinicio o apago la pc, debo desenchufarle la electricidad para que encienda. Si la apago del switch y la vuelvo a encender sigue congelada. Ahora una vez que hago esto funciona perfectamente.
    Gracias por tu tiempo.

Maybe you are looking for