K7N2-ILSR Problem with VGA

Hi,I have a problem with my K7N2-ILSR motherboard.
I have problem with my VGA card ?( :
ATi Radeon 7000 64Mb
Problem:
after installation WINXP and consecutive in-boot system come to notification errors due VGA and follow reboot

DanteA,
Load the nForce Drivers from nVidia and the Catalist Drivers from ATI and see what you get. (Install them in that order.)
Take Care,
Richard

Similar Messages

[nForce] K7N2-ILSR Problem with FSB

i am having trouble with the above
if i set the FSb at anything over 167 in the bios the system will boot as far as windows then hang at the welcome screen,
if the FSb is set at anything below 167 everything seems fine
specs of the pc are
AMD 3200+ athlon xp
MSI K7n2-ILSR
Tt Volcano7
2x512 MB PC3200 Geil Duel channel
Nvidia GeForce2 mx400
1x160GB maxtor sata Primary Master
Sony DVD RW DW-U10A Secondary Master
TDK CDRW480 Secondary Slave
Realtek AC97 Onboard Audio
650w poewe supply with triple fans
Windows XP SP2
ps memory runs fine at 2*200 no problem

Does problem exist when running fsb:dram at 1:1?
same problem whichever ratio is set
List max amps for psu for 3 different rails; supply make/model also; 650W sounds impressive but it might be a Q-tec
it is a q-tec supply ? i gather there is a known problem with these ?
maxtor sata on IDE master? typo?
OOps Typo maxtor sata on sata port
Is this new system? Or added new component
system previously had an amd 1800 chip and 333memory and ran stable
Is cpu/heatsink correctly greased/fitted?
cpu is seated corectly and thermaltake silver heat paste used
What are temps in bios for cpu/system?
CPU running at 44 degrees chassis running at 34 degrees

MSI K7N2 Delta-ILSR problem with Promise

Hi, I have a little problem with Promise FastTrack 376 on mainboard K7N2Delta-ILSR. I need change AAM settings and view SMART information (!SATA drive!). How change AAM settings with Promise FastTrack 376 and who apply program for view SMART information(!SATA drive!)?
How connect LED diode on SATA drive? Now not functions, functions with only PATA drive (already blinking).

you can use this program to got SATA Led. can be bring signal to your keyboard Scroll Lock LED. etc. when your SATA drive is working will blink your keyboard Scroll Lock LED. download here:
http://www.oo-software.com/en/download/index.shtml

Problem with VGA Offboard G31M3L

Hi all,
I have a problem with my computer.
I installed a offboard VGA, and sometimes says no signal. i rly tired to turn off and turn on until the video works..
I alrdy, put primary vga on bios PCI-E 2.0, sometimes need reset many times until displays.
The onboard vga works normaly without offboard video card.
Anyone know why? tried to put memory stick in second to see if works and the problem still persists..
I rly suspect my power supply, becuz it have a 20pin.. not 24.. its the problem???
My config:
Pentium Dual Core E5200
MSI G31M3-L V2
2Gb Kingston memory
Nvidia Geforce 9400GT XFX 1gb
Zalman 400B-APF (20 pin) <-- mby the problem?? its not a bad supply.. yeah older but war veteran.

18A @12V should be okay for your system configuration (as long as you are not using an excessive amount of hard drives, optical drives, system fans, LEDs and the like).
Clear CMOS with main A/C power cable removed from PSU, load "Optimized Defaults" in BIOS after that, set the PCI-E Card to Primary VGA Adapter and see if that changes anything. If it doesn't, please test a different PSU and a different video card (preferably PCIe v1.0a). I am not convinced this is a mainboard problem.

HT204382 Problems with VGA cable for MacAir

I have just purchased the new 13" Mac Air with VGA cable to connect to projector. On trying to project the image from the screen onto computer I am having problems. As of yet I have not been successful. What is the problem?

We are having the same problem. MBA running MAC OS 10.7.4 has issues connecting to projectors. We have tried 5 different Projecotrs & they all have similar problems. Lines running across the projection screen. We have tried changing resluotion to 800 x 600 or 1024 x 768/640 its the same problems (lines runnig across projection screen not the MBA.
Apple any help greatly appreciated.

Problems with Vga,Ati...

Hello,
Last day,i downloaded and burned ArchLinux with kernel 2.6.34...(2010) and when i want to install it from CD (Core offline install) it do this...
<moderator edit>Large image removed. Please feel free to repost it in accordance with our image posting guidelines. tomk</edit>
Uploaded with ImageShack.us
...and i tried another linux distro with kernel 2.6.3x and it do the same thing...but with kernel 2.6.2x it not does this....maybe its problem with Ati drivers...so is there any solution to change ati drivers at boot form CD (trough the TAB key)
I have Asus L84F With 128MB Ram,20GB HDD,ATi Mobility Radeon M6 (ID 4c59,8MB)
Why it do this??...please help me i love ArchLinux...and sorry for my bad english :-)
Last edited by Dallitec (2010-06-28 16:59:24)

I think 128MB was the bare mimimum when I did my laptop install but if your graphics card reserves any memory it may go below what it can work with in your case(I only have 192MB in my ancient toshiba laptop, I think I installed when I only had 128MB in it but I used an older Arch boot cd to install with). I can't read your screen because of the glare/washout on the bottom, what is the install boot screen telling you. Does your laptop have a vga out that you can hook up an external monitor to? You might have to tell your bios to switch to the external vga out if the laptop doesn't automatically detect and switch.
I haven't used a recent boot cd but I know that the current Arch kernels activate kms for radeons now on bootup, not sure if that boot cd is compiled with kms activated or not. You can try adding radeon.modeset=0 to the end of the boot command line of the install boot entry on the cd. That will not force kms to start and should leave you with vesa/vga screenmode to start the install with.

Problem with vga coller

i have a broblem with vga fan on my vga msi G4ti4200-td64
the fan withe stop for working how i by another fan for make any think for that
please ;( help me

Morad,
Where do you live? Vantec makes some good Fans for Vid Cards and Zalman makes some great Heatpipes if you like silent cooling.
Take Care,
Richard

Problem with VGA port of IdeaPad G580

Hello all,
I am trying to connect my analogue VGA Samsung display to my new IdeaPad, just as I did with my 5 year old Sony Vaio. The problem is that the standard cable won't fit into the in-built VGA of the IdeaPad. I understand there are other possibilities (i.e. using a DisplayPort to VGA), but I don't see a reason to do it since the VGA to VGA port is the simplest cost-effective solution for me.
Has anyone had this problem? Is it possible that my IdeaPad is badly assembled and will therefore not accept a normal VGA connector?
Thank you for your help.

Hi Gamoreno,
Welcome and Thanks for posting in the Lenovo Community,
I’d like to ask you to explain more about the issue and could you please share with us a picture from your VGA Cable that you are trying to connect.
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problem with vga (probably).

Hello guys! I'm new member of the forum so be patient! I did a quick search and i didn't find any solution to my problem so i posted here (hope in the right section). I had installed Arch on my netbook before some months and i liked it a lot so i wanna install it to my desktop too. When i'm gonna start the installation (/arch/setup) i 'm getting this error:
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 64
Raw EDID:
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for DVI-I-2
[drm] nouveau 0000:01:00.0: No native mode, forcing panel scaling
I read that i can ignore this error but i'm afraid i will have bugs after the installation. I had a problem in Ubuntu with the kernel 3 and my pc was freezing all the time (especially when i was playing a game -Savage2-). Neither ctr+alt+delete nor REISUB was working so the only solution was the reset-button! When i was booting with the previous kernel it was fine. My VGA is GeForce GTS250. I would really appreciate it if you could help me...
Last edited by NickMrg (2011-10-14 22:34:03)

I am seeing this on multiple new attempts at installing arch on machines.
One is a amd-system, with an integrated amd-video driver
and the second is my intel c2d system with both an integrated intel gma and a dedicated nvidia card.
It makes installation very messy, since the EDID probe keeps getting spammed in the terminal,
even when switching to tty2 or 3 a.so, it get's spammed in intervals on the current terminal.
Thus i have to do things like km, quickly select keycode, and the actual arch install ncurse dialog is getting messed up aswell between these intervals.
Is it the recent kernels, or something, that does this when using vga trough a DVI-adapter, or just anything else then DVI?
I belive it should tell me of the problem, but not on the running terminal, and just once in dmesg log.
I hope this can be solved upstream somewhere, where should we make this an issue?

T420 (4180-1G8): Problem with VGA output to external monitor

Hello,
I am trying to get the VGA output to an external monitor to work.
I am connected to my monitor directly using a standard VGA cable.
I am trying to enable primary display to the external monitor: I only get a black screen. The monitor says it is not receiving a signal.
When I try to clone or extend the display: same results.
Here is my setup:
Monitor: Iiyama ProLite E2710HDS
Operating System: Windows 7 Professional 64bit w/ Service Pack 1
Laptop: Thinkpad T420 (4180-1G8)
Graphics Adapter Info:
Intel(R) HD Graphics 3000
Report Date:            1/11/2012
Report Time[hr:mm:ss]:        10:27:8
Driver Version:            8.15.10.2538
Operating System:        Windows 7 Service Pack 1(6.1.7601)
Default Language:        English (United States)
DirectX* Version:        10.1
Physical Memory:        3979 MB
Minimum Graphics Memory:    64 MB
Maximum Graphics Memory:    1696 MB
Graphics Memory in Use:        88 MB
Processor:            Intel64 Family 6 Model 42 Stepping 7
Processor Speed:        2491 MHz
Vendor ID:            8086
Device ID:            0126
Device Revision:        09
*   Processor Graphics Information   *
Processor Graphics in Use:        Intel(R) HD Graphics 3000
Video BIOS:            2089.0
Current Graphics Mode:        1600 by 900
*   Devices Connected to the Graphics Accelerator   *
Active Notebook Displays: 1
    *    Built-in Display    *
Monitor Name:            ThinkPad Display 1600x900
Display Type:            Digital
Gamma Value:            2.2
DDC2 Protocol:            Supported
Maximum Image Size:
Horizontal:            12.20 inches
Vertical:            06.69 inches
Monitor Supported Modes:
1600 by 900 (50 Hz)
1600 by 900 (60 Hz)
Display Power Management Support:
Standby Mode:            Supported
Suspend Mode:            Supported
Active Off Mode:        Supported
Raw EDID:
00 FF FF FF FF FF FF 00 30 AE A1 40 00 00 00 00
01 14 01 03 80 1F 11 78 EA CC CE 99 58 50 8E 26
24 4B 53 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 F8 2A 40 9A 61 84 0C 30 40 2A
33 00 35 AE 10 00 00 18 CF 23 40 9A 61 84 0C 30
40 2A 33 00 35 AE 10 00 00 18 00 00 00 0F 00 A9
09 32 A9 09 32 19 09 00 06 AF 56 31 00 00 00 FE
00 42 31 34 30 52 57 30 32 20 56 31 20 0A 00 7B
Regards,
Stephane B.
Note: the external monitor works fine with my desktop computer and with a T400 laptop.
Solved!
Go to Solution.

Follow-up:
I have tried the latest "generic" Intel driver after completely uninstalling the device driver from device manager: without success.
I have tried another monitor from a different manufacturer: no luck.
To eliminate the device driver as a possible cause, I tried booting from an Unbuntu boot CD: no luck.
I have enabled boot display on the VGA port in the BIOS: screen remains black.
I am suspecting that the VGA port on my brand new Lenovo Thinkpad T420 is simply not working at all.
I have opened a call with my hardware support.
Regards,
Stephane B.

Problem with VGA connector, ipad 1 and 4.3

Since my update to 4.3 on my ipad 1 the VGA connector does not work more. Is a bug known ?

Same problem - iPad 1 since update to iOS 4.3 now shows "Not Optimum Mode" on video out to pico projector Samsung SP-H03. Have tried resetting, changing video-out from PAL to NTSC, Widescreen on and off, everything really.
Nothing works, very frustrated. I used to use this all the time.
If Apple are reading, please fix this - it's effectively broken what I used my iPad for.
Anybody any ideas if downgrading back to 4.2 is possible?

Problem with VGA card

Hi,
I just bought an MSI 865 Neo2FISR MOBO and a Asus 9600 XT VGA card.
As someone said to me on this forum, i install first the intel INF files (april 2003 version)from the MSI CD. The screen was OK (only try with XP not with Games).
Next I install the Asus drivers and reboot the system. Since I've done that, my screen is complety black and i only can have XP in a special mode ("sans echec") in french.
2 days ago i instal first the Asus drivers, Direct X 9 and next the Intel INF and the result was the same.
Can someone Help Me ?
Thanks!
Configuration :
P 4 2.8 Gh HT
MSI 865 Pe neo 2FISR
Seagate 7200.7 120 Go
2*256 DDR 3200 Twin X LL Corsaire
Asus 9600 XT
XP Pro
Sony DVD Player
Pionneer DVD R 106 Burner
Screen : Hercule 920 Pro DVI

Try with ATI reference driver instead.

PROBLEM WITH VGA

Is there any problem found between msi k7t266a pro2 ru and ati radeon VE with AMD XP 2100+ ?

argi74,
Since your MSI Product is the Motherboard and not the Video Card, I moved your thread from the Multimedia Forum to the Via Forum.
Take Care,
Richard

K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping .... good luck!
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

K7N2G ILSR - Problems with Geil PC2700 memory

I am having issues with my k7n2g and its ability to init GEIL memory. I can not get the system to init the memory consistently, have the time it will just hang. Since the company Xtreme Gear will only swap for additional geil memory, I would like tomake this work. Any ideas on the exact settings for the memory? I have tried adjusting the voltage to 2.7 as suggested on the geil memory package but that does not help.

try setting memory to High Performance in bios

K7N2-ILSR Problem with VGA

Similar Messages

Maybe you are looking for