K7N2 ILSR sata drivers.

Anyone have the floppy disk with the drivers for this thing?
My driver section on xp just SERIOUSLY crashed. I can't even get into Device manager.
Not even when trying to get in during Safe Mode.....
This sucks bigtime.
Had nothing but problems since i installed the SP2, i really dont know why, installed
all the drivers for everything on my pc immediately after i got it. just like i should.
I cant even uninstall sp2 now..... yippie :-P
I just need the floppy disk with the SATA drivers so that i can format the damn thing and reinstall everything. :-/

hello welcome to the forum.
here its driver which you are searching for
http://www.comebackandplay.com:8080/~jay/downloadfiles/FastTrak_S150_TX_Series_Windows_Driver_1.00.0.37.zip
in MSI site drivers is x.xx.x.21 version(older)
i have your mobo its great dont have any problems with SP2 or other problems
suggest reinstall windows with included SP2 on it. manual SP2 install decrease system perfomance.
Instalation: download and extract files copy these files to diskette:
fasttx2k
README.TXT(not really need )
txtsetup.oem
and WinXP directory(included all files in this directory) if you are using XP
and etc for other OS.

Similar Messages

K7N2 Delta Sata problem

I know this has been posted plenty of times before but the fixes for those do not seem to be working.
Im running a K7N2 Delta ILSR and have bought myself a Hitachi T7K250 250GB sata2 drive but am having real problems installing it.
I want to run my trusty Win2K
I have done the CTRL - F in bios thing and set my drive as a striped raid, after which i reset and the post states i have a functional drive.
So i boot from my Win2K CD and hit F6 when prompted to do so and insert my driver floppy, i install both the Raid and Storage drivers but when i get to the actual Windows set up it states it cant find a hard disk.
I have tried the SATA drivers from the MSI website, and NVIDIA and am wondering if the promise drivers would be more sucessful.
Does anyone else have any suggestion of what to do next?

I have created and also replied to several posts on a very similar issue. The Delta2 version will NOT work with some SATA II drives. I have found NO fix for this and I have spent a lot of hours on it.
As Stu points out, the two boards have different controller chipsets, but I would guess them to have the same problem. Also, my experience is with Maxtor brand drives. Different products, but likely the same issue.
Try a SATA I drive to test. My experience with jumpering a SATAII drive into SATAI mode resulted in total failure.

How to tell if video card works at 8x speed on MS-6570 K7N2-ILSR?

my mobo is MS-6570 K7N2-ILSR with the latest bios update and my video card is ATI READON 9600 236mb 8x agp and windows xp pro sp2.
when installing ATI Catalist v5.9 (the latest), it configures the card at agp speed: OFF.
in the bios, all i have for agp speed is: AGP 8x - enable/disable.
my friend have gigabyte mobo with the same video card and ati catalist configured his video in windows xp pro sp2 at 8x speed.
why ?
is there any configuration i should check in the bios and/or in windows ?

Quote from: Wonkanoby on 07-October-05, 18:22:19
you have to install the gart driver in the nforce drivers packagenVidia Drivers
and best its done before the ati drivers
gart driver ?

[nForce] K7N2-ILSR Problem with FSB

i am having trouble with the above
if i set the FSb at anything over 167 in the bios the system will boot as far as windows then hang at the welcome screen,
if the FSb is set at anything below 167 everything seems fine
specs of the pc are
AMD 3200+ athlon xp
MSI K7n2-ILSR
Tt Volcano7
2x512 MB PC3200 Geil Duel channel
Nvidia GeForce2 mx400
1x160GB maxtor sata Primary Master
Sony DVD RW DW-U10A Secondary Master
TDK CDRW480 Secondary Slave
Realtek AC97 Onboard Audio
650w poewe supply with triple fans
Windows XP SP2
ps memory runs fine at 2*200 no problem

Does problem exist when running fsb:dram at 1:1?
same problem whichever ratio is set
List max amps for psu for 3 different rails; supply make/model also; 650W sounds impressive but it might be a Q-tec
it is a q-tec supply ? i gather there is a known problem with these ?
maxtor sata on IDE master? typo?
OOps Typo maxtor sata on sata port
Is this new system? Or added new component
system previously had an amd 1800 chip and 333memory and ran stable
Is cpu/heatsink correctly greased/fitted?
cpu is seated corectly and thermaltake silver heat paste used
What are temps in bios for cpu/system?
CPU running at 44 degrees chassis running at 34 degrees

K7N2-ILSR: adding S-ATA drive to existing system

Hello everyone,
I have a system based on the K7N2-ILSR, Athlon 2500+, 2x160GB IDE Harddrives.
Now I wanted to connect a S-ATA drive (with data on it) from a friend, but I can't get it to show under Windows XP Pro. I've installed the drivers for the Promise chipset and this is shown in the device manager. I understand that you have to create a "1 disk array" before the drive can be used but I can't afford to loose the data on it. Is there any possibility to connect the drive without having to format it?
Thanks in advance,
Bomfunk

Quote from: Bomfunk on 11-February-07, 18:52:53
What type of array do I have to create in order for it to work?
Any parameters I have to be aware of?
Thanks for your help,
Bomfunk
standart stripe RAID1+0, use defaults parameters.
about aware as i notice before remember to answer with "NO" when asked about this:
Do you want to clear boot sector that will.delete any existing data on your hard disks?.Y - Clear boot sector Y/N

K7n2 ilsr boot sequence problem

Hi All,
I have problem with my new k7n2 ilsr mobo. I have a Seagate 120 GB SATA HDD on the SATA RAID controller, and other HDD-s on the IDE1 and IDE2.
If the SATA drive is alone in the system, it boots up normally, but if I connect the PATA drives, the computer want to boot from the first PATA drive.
How can I set up the boot sequence between the SATA and PATA?
I cant find any option in the BIOS.
I hope, somebody can resolve my problem.
Istvan
K7N2 ILSR v. 1.3
AMD Barton XP 2500+
2x 512 MB Samsung DDR RAM
Seagate Barracuda 120 GB SATA HDD
WD Caviar 40 GB PATA HDD
WD Caviar 850 MB PATA HDD
LG CD-RW
LG DVD-ROM
Matrox G400 VGA
400 W noname PSU

Hi Raven,
Thanks for Your help.
Istvan

K7N2-ILSR sound problem

Hello ,
I'm havinig random weird sound problems :
when i play video after a long time the sound gets laggy/grating/out of sync .if i pause the film and start again it fix the problem . also sometimes after playing for several minutes i get noise/hiss added to the sound.
this happens randomly and after playing for a while. i'm using win xp ,nforce 2.45 drivers and the sstorm control panel.
what causes the noises?
my system :
K7N2- ILSR
AMD XP 2500
twinmos 2X256 PC3200
HITACHI 120GB
GAINWARD GF4 TI4200

I have the exact same problems you mentioned but I am using a old nForce 1 msi board. K7N420-Pro to be precise.
Usually it runs pretty well in games and such, but when ever I try to play winamp it gets very very buggy. sometimes I can't even get through 5 seconds of a song, other times it will get through 2 or 3 and then mess up until I hit next. I upgraded to the 2.45 yesterday from the 2.11 drivers and still got the problems.
I don't think its a heating problem since it has seen far worse heat in this computers past (winter term right next to the wall heater in the dorm) then where it is now in a 72 degree room.
Any help would be appreciated.
Velmeran

K7N2-ILSR IDE/RAID Slot 3

Hi Guys, I have built and repaired a number of PC's over the years but I've never had any experience of RAID. I've just treat myself to a new system based around the K7N2-ILSR board and would like to know if the RAID channel of IDE port 3 Can be used and accessed just the same as any other IDE channel. I was thinking of future expansion should my existing drives approach capacity could I simply use this channel to add another drive.
I would appreciate any advise on this subject.
Thanks

you can connect 1 harddrive to ide3.
and you must create a raid0 array even if its alone.
with a hacked bios its possible to use 2 drives.
sofar only talked to one guy and he used 2 sata and 2 pata in 2 raid0 arrays and it worked good for him

K7N2-ILSR Sudden freezing due to onboard sound

I have had a few problems from the start with the K7N2-ILSR, i have overcome them all except my machine freezes when the onboard sound is enabled. I do not have any other cards in my machine except for my Geforce4.
The problem will only occur when the onboard sound has been eneabled in the bios it will happen when you play sound or not it just locks up or restarts!!!
I have read through alot of the posts and i havn't come across any problems that are the same.
Could you please give me some help as i am getting really annoyed with it.
Cheerz.
3000+ Barton 333
K7n2-ILSR Delta
2X 256mb DDR400 Kingston
80gb IBM ATA100
120gb Diamond maxtor 9+ 8mb
Asus Geforce4 Ti 4400
Pioneer a05
lite-on 16X DVD
Memorex 24X 1040MAXX

No If i enable onboard sound or install a PCI card i will get a lockup whenever! I don't have to be doing anything it will just suddenly freeze.
I am using my machine now with the onboard sound off and it will not freeze at all but after this session on the internet i get an error and then my machine will not BURN
COPY & PASTE
SAVE Documents
or Shut my Internet down
I installed win2k on the HDD on IDE1 (Master) after setup finished i added the second HDD on IDE3(Raid) set it to a "0" array.
I am going to try a fresh install onto my HDD on IDE3 (Raid) with WINXP chosing the Raid option in setup then install all the latest drivers from nvidia and so on.... The only problem i have is time or lack of!
i have ran the memtest86 V3.0 and i din't get any errors but i ran the test while i had dual ram setup. I will try again seperately.
I have also changed my DDR settings to 333 to match the CPU this has had no effect.
What powersupply would you say is the best? Where to get it from? and how much?

K7N2-ILSR Lan Won't connect!

:bonk:I am at the end of my rope!I bought a K7N2-ILSR in January and was so frustrated when I could not get the LAN to connect no matter what I did.I finally submitted my problom to MSI and received a RMA and my board was replaced.I have the same problom.I can put in a separate PCI card and will work fine but the onboard will not connect.I have been through troubleshooters and driver reload and hardware removal and reinstallation.I have ping tested without failure in the windows troubleshooter.The light blinks and it says it is sending packets but receiving none.Any ideas?

Did you load the system disk that came with your mainboard?
nVidia also has the unified drivers.
For Windows XP here:
http://www.nvidia.com/object/nforce_udp_winxp_4.24
Or are you running Linux? Heck Mandrake 10 final release finally is now supporting LAN

K7N2-ILSR boots in BIOS - 2 LEDs on

Hi.
I have a real Problem with my K7N2-ILSR MB. The last evening, I switched my PC off. Next day, I wanted to start it, but the boot-routine always goes to the BIOS. A RAM Test ran successfully. The D-Bracket shows the following sign, but I don't know the meanig of it.
Lamp 1: RED
Lamp 2: GREEN
Lamp 3: RED
Lamp 4: GREEN
My HDD ist an SATA one and I also have a Radeon 9800 PRO from Sapphire.
Thanks for ur help.
hulla66

Hello,
Do you have another video card to try?
Check the memory, remove it and put it back in.
Were you overclocking anything.
Could it be a weak power supply?
If you have a look on the power supply you will find a sticker with the following infomation arrange in a grid/table.
eg
400W
+12v = 18a
+5v = 32a
+3.3v = 28a

K7N2-ILSR Problem with VGA

Hi,I have a problem with my K7N2-ILSR motherboard.
I have problem with my VGA card ?( :
ATi Radeon 7000 64Mb
Problem:
after installation WINXP and consecutive in-boot system come to notification errors due VGA and follow reboot

DanteA,
Load the nForce Drivers from nVidia and the Catalist Drivers from ATI and see what you get. (Install them in that order.)
Take Care,
Richard

K7N2 ILSR random re-booting

Hi all
Specs..
K7N2 ILSR Delta
AMD Athlon XP2800+
512 mb Kingston Ram
Nvidia Ge force FX 5700
IDE:
Master: Maxtor 160gb
Slave: WD 80 gb
Serial ATA: Maxtor 120gb
Roms:
Master: Lite on DVD Dual layer writer
Slave: Hitachi DVD rom
550w Psu
Windows XP pro
Problem. Started out with a K6 mobo, all went well but after a week PC failed and I had to re-install Windows. Then started getting random shutdowns, initially only when using DVD Shrink but then all of the time until Windows crashed out again!
Went through re-install and some diagnostics and eventually changed mobo for this one, K7N2.
Fresh install of Windows. (Had to phone Microsoft!!) Everything fine for two days and then......random re-boots, mainly on DVD Shrink.
Did following, Changed ram. Hard drive. Power supply up to 550w. Disconnected all drives except master. Disconnected all drives. Re-installed windows to different drive as a test, same issue, possibly seems ok until i do all the updates and get the latest drivers in? Have tried ROM config's only 1 rom connected etc to isolate those. Have changed all cables in case of tiny hidden cracked wire.
In other words, I have tried everthing i can think of, have basically re-built the thing and get same prob under different conditions, installations, even after 2 mobo's, only thing I didnt change yet is the chip. My feeling is probably its a driver issue, have read the comments on the BIOS site and flashed to 7.7 so thats up to date. Am now going to re-format, re-install and run with basic drivers, see how that goes, then introduce drivers and see what makes it crash. Will let you know how I get on if I doont throw the damn thing off of a bridge and take up Knitting instead. In the mean time if any of you can help.......PLEASE!!
PS I Use dvd shrink as a test because it almost always causes a crash, but not always, and during the encryption process which I imagine is very processor hungry, writer doesnt cause crash as its not involved at crash stage.

:idea:ok this i what happen to me when i first install windows and like u geting update and my pc went nut more or les :noidea:I didn,t inable the fire wall. In my case win xp so things keep going wrong if it wasn,t this it was that, still I didn,t know? so what I did was to disconmnect the internet and and once again start from scarch format the drive I intsalled windows xp ( advaned)inable the firewall than updates and things r great, :rolleyes_anim:Give it a shot

Hard-Drive not Detected load sata drivers

Hi everyone I have a G6-1189sa notebook, I had a faulty harddrive so replaced it with the exact same drive 750GB WD, Thing is I could not save anything from the original drive ? so no recovery partitions are anything I even lost all my family photos and software.
Ok so I done a straight swap over and went ahead installing my fresh Windows 7 x64 disk, then I got an error message saying no device detected please install driver etc etc.
I know I need to install the sata driver for the harddrive to be detected, so I extracted the HP sata control driver to a USB pen the tried to load the driver, with the load driver option on the install disk.
Error message saying driver is not signed !!!! So after some reading on google I learned I had to disable the naitive sata option in the bios settings for the harddrive to be detected.
Thing is there is not a option for this in my bios ? unless Im missing something like an advanced bios setting.
I even went to the Intel site and tried some of there drivers but I get the same error message driver not signed.
So my question is ? how can I disable the native sata option if Its possible , If not how can I load the HP sata driver if its not signed.
Its very anyoing someone even said I have to slip the drivers in and make a new home made W7 disk myself to get my pc working again what the hell, where would I start.
Maybe I should put the laptop in the post and send it back, Ive never had so much trouble before making simple memory and harddrive exchanges.
Any advice please people Im at my wits end, my laptop is only a few month old and its now a door stopper lol

Hi,
Boot into the bios and be sure that the hard drive is detected.
Sata drivers are included in Windows 7.
Return the bios to its default settings and use the HP Recovery Disks. If you don't have the Recovery Disks then order them from HP. Order HP recovery Disks.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Confused with Raid Sata drivers

Sata,Raid
Should I install these Drivers?
Which one.
Do I need a raid card?
Building Computer for my wife.Ready to install OS.
I got a floppy with MB.Says drivers for VIA sata raid.
Floppy has two folders Pide and Raid.
Checked with manual but still not sure if I must install
these drivers when installing XP.MB has Integrated dual channel native Serial ATA/RAID controller that will supply 150MB/s and support RAID 0, RAID 1.
AMD Sempron 3000+ 1.8GHz Socket 754 64-Bit Processor Retail
MSI K8MM-V MS-7142 Motherboard,VIA K8M800-CE + VT8237R Chipset
Western Digital Caviar SE Sata WD-1600JS 160gb 8m-S2JS
ASUS G-Force N6200 128 mb AGP Video Card
DVD-RW DL LightScribe
512 DDR 400 Ram
Have WinXP 64 bit "no legal serial"
Installing WinXP Pro SP2 32 bit "Legal"

Didn't even clic in what raid was about.Duh. In the bios on this board it had to be set as IDE.Under sata I had two settings Raid or IDE.I thought noway its IDE so I went raid.So thanks it worked right away.Didnt even have to install sata drivers at the OS XP install.I just went with it and it worked.This is what I got in device manager.
IDE ATA/ATAPI controllers:
Primary IDE Channel 5.1.2600.2180
Primary IDE Channel 5.1.2600.2180
Secondary IDE Channel 5.1.2600.2180
Secondary IDE Channel 5.1.2600.2180
Standard Dual Channel PCI IDE Controller 5.1.2600.2180
VIA Bus Master IDE Controller 5.1.2600.2180
A little confusing but it works great.It also recognized my 160gig HDD.The full 160.I was surprised.

K7N2 ILSR sata drivers.

Similar Messages

Maybe you are looking for