K7n2g ILSR and SPDIF output not working

just got a new k7n2g ILSR mobo and cant get the coaxial spdif output to work.
Have attached the s bracket connector and a coaxial cable from that to my videologic digitheatre. My speakers don't seem to be receiving any signal however. Checked the audio settings on the nforce control panel and all seems sweet. any suggestions?
Thanks for any replies

I have the very same problem. I thought that the S-Bracket was defected so I borrowed one from a friend of mine. We have the very same board and we bought it the very same day. And it did not work either. :(
Then I made a little test. The user's manual displays the pin layout of the S-Bracket connector on the mobo so I connected two little wires to the appropriate connectors and connected the wires to a standard RCA connector. Then I connected this to my receiver's coax port and it worked!
So it seems to me that the S-Bbracket was (and IS) defected. Then I thought that my friend and I had the same faulty series of S-Bracket but now I don't know what to think...

Similar Messages

Both left speaker and headphone output not working

I noticed a week ago that the left headphone audio output wasn't working, and shortly after I realized that my left speaker wasn't working either. I thought maybe it was a matter of updating some software, but everything is up to date. Anyone encouter this problem before?

Solved my own problem,
System preferences - sound- output- balance.
Strange thing is I don't recall adjusting those settings. Hope this is helpful to anyone else who has this issue!

Optical SPDIF output stopped working- why?

I recently installed a larger HD and more RAM in my 1.63MHz Mini. After getting buttoned back up I noticed the optical SPDIF output stopped working (as in NO laser visible). Is there any possibility that this could be related to the OS (10.5.8)? Seems unlikely since it was fine before installation.
I really need this as it is my only option for interfacing with my playback system.
Rich

Hi Rich,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

T410 with integrated graphics - DVI output not working on Mini Dock 3 (4337)

I tried connecting my external monitor to the DVI output of the Mini Dock and it did not work. I have since connected it with no issus to the VGA output.
However, I want to use the digital (DVI) connection for my monitor........how can i fix this issue?
NOTE: I have a T410 with the integrated graphics so my laptop screen does not display while docked (I keep the lid closed).

Hi MarkinIt,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with no Display when connected to docking station on your ThinkPad T410.
Have you checked updating the Intel graphic driver from Lenovo support site?
Please provide the current Graphic driver version showing in device manager.
Is the system having Windows 7 or Windows 8 OS?
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Windows error: iTunes crashes (uninstall and reinstall does not work)

Hello all.
I (and another user) have had a problem with iTunes crashing when trying to open it. Windows just generates the typical vague error message that explains nothing as to what the problem is. Uninstalling and reinstalling did not work, and using the "Repair" option did not work either.
This was the solution. Hope it works for you. Cheers.
C ;o)
Here are the steps, some might be redundant, but still follow them to try and get iTunes to work.
1. *Extremely important* Close the QuickTime launcher in the tray on the right side of your Windows TaskBar (right-click on the blue QuickTime "Q" logo next to where you have the time and date and select "exit".) The QuickTime logo should disappear from the tray.
2. Go to where your iTunes library folder is, copy it and put it elsewhere on yoour hard-drive. This is where you asked your iTunes to point to and keeps the full repository of the files sync'ed to your iPod. If you don't do this, you will have to re-create the full library of all the music and files you have put into iTunes.
3. Unistall iTunes and reboot your PC.
4. Go to c:\Program Files\Quicktime and delete this whole folder.
5. Go to c:\Windows\System 32 and: delete the Quicktime FOLDER there; then (ii) scroll down and delete all other QuickTime related files (there should be 5-10 of them, I didn't count, some will have a name like QuickTMvr whatever).
6. Empty Recycle Bin.
7. Reboot your PC.
8. Go back to Apple Website and download: iTunes, and (ii) QuickTime installation only (without iTunes).
9. Install QuickTime FIRST (use newly downloaded version)! Check it works OK by opening it.
10. Close QuickTime lanucher from tray, as explained above in step 1.
11. Install iTunes (use the newly downloaded version).
12. Open iTunes. If it opens fine (clap your hands and say "hurray", and actually I said out loud to my PC, "Please work" and it did - I don't know if this step helped at all. ;o) ), then close iTunes FIRST BEFORE DOING THE NEXT STEP. Go to where the new iTunes (and library) folder is, rename the new iTunes folder (as you might notice when/if you open iTunes, that it is all blank), and copy the old iTunes folder (from step 2) to the same location. Re-open iTunes. It should be the way it opened the last time.

Btw.
Don't forget that, from my experience, most iTunes errors comes from malfunctioning instances of QuickTime.

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

I have installed adobe flash player on my computer and this is not working please help

I have installed adobe flash player on my computer and this is not working please help

What is your operating system & version?
What is your web browser?
What means "not working"; what do you see instead of the expected Flash content?

K7n2g ILSR and SPDIF output not working

Similar Messages

Maybe you are looking for