K7N2G-ILSR BIOS 1.3 Problem

8o
have a K7N2G-ILSR and flashed lastest bios but no work for me...?
CPU: AMD Athlon 2700+
Video: ATI Radeon 9700 Pro
Memory: Corsair 512-XMS3200C2

mrbig,
Try removing the power cord from the power supply and the battery from the motherboard and leave them out a good 15 to 20 minutes before putting them back in.
Good Luck,
Richard

Similar Messages

K7N2G-ILSR MS-6570 Restart Problems!

K7N2G-ILSR MS-6570 Restart Problems!
Has anybody else had a problem like this . . .
Ive got this problem with two machines now!!!!
Say for example you boot your machine and go into the bios to change whatever. Then save and exit. It should reboot and carry on to go into windows (or whatever). BUT . . . both of my machines restart and then just sit there and give a long beep which then repeats.
If I turn the machine off completely then back on it starts up ok with any changes to the bios kept from last time.
Can anybody help?!?!??! ;(
I have updated to the latest bios (which is 7.2)

I now have the MSI K7N2 Delta-ILSR (601-6570-030).;
On the box:- NVIDIA nForce 2 Ultra 400 Chipset Based.
K7,nFORCE2 Ultra400/SPP,MCP2-T,FSB400,D-Bracket2,Round cable,2*SATA&power cables,1394 cable,S-Bracket,WinDVD4.
I have 2x256 PC3200 Corsair DDR and a XP2800 Barton, tried and tested at 240fsb(237fsb Totally stable), And I get the same thing happening to me..Also this board and the last one will NOT do the claimed 400fsb..
And dont say it's the ram because it's not, the ram and CPU are fine.... It's the Motherboard that is incompatable with the Ram & CPU
why because my Ram is Corsair(the name speaks for itself) and works in every system to date!.. The CPU is AMD also works in every system to date!
Soon as i get around 193+(fsb) it starts to do the same thing wont reboot, and does the beep thing! at 200x7 200x7.5 200x8 200x8.5 200x9 200x9.5 200x10 200x10.5 200x11 200x11.5= NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING but BEEP ......BEEP.......BEEP.
I also bought a brand new Antec TRUEPower550Watt with front voltage control (£100+) and that still does,nt do it
this is my second board, and im totaly fed up with there crap board. I spent good money for this TOP Class Ram and dont expect to be told the Rams wrong when it works in every other system i have had my hands on!!!!!!!
MY advice is send it back and get an other and if thats no use send it back again and get a refund and buy an ABIT NF7-S.. with exactly the same components i get a fsb of anything(100) upto 240fsb abit..
SIG is old board

MSI K7N2G-ILSR onboard video initialization problems

Hi, today I replaced my wife's trusty Abit KT7 motherboard with a MSI K7N2G-ILSR. I used the onboard video since she doesn't play games. Everything seemed to be working fine until I went to boot it up. The computer started up as usual, but the monitor did not intialize like it should. The message on the monitor said that " the monitor was working correctly and to check the cord or the computer." I rechecked all of the connections and everything seemed to be installed correctly. I thought that maybe there was something wrong with the onboard video, so I decided to install the Radeon 9000 that was in the old system. To my suprise I received the same message when I started the computer up the second time. I have built several systems and have never encountered a problem like this before. I read the thread about problems with the Radeon cards, but no one mentions anything about problems with the onboard video. I am using a Duron 750, Antec 330 watt PSU and 512 megs of Kingston Value Ram. I know that several posters have recommended that nforce 2 users need a more pwerful PSU and better ram, but I have a hard time beleiving that those things would cause the video not to intilaize. I would appreciate any feedback and/or suggestions because I need to make a desision about hwat to do with this board. Thx.

Well I appreciate the replys. I formated the harddrive before I installed the motherboard because I was worried that the via drivers would cause problems when I booted it up and installed Win XP. Bonz, you are right, I am just guessing that everything is OK since I can hear the system start up, but I can't see anything since the video never intializes. I rechecked all of the connections and even took the motherboard out and reinstalled the cpu, memory and motherboard and the same thing happened. I started thinking something was wrong with the monitor so I unplugged the monitor from my system, which I know works, and it did the same thing. I just wish I could get the video to intialize so I could see to get into the bios to look around. I will check the jumpers on the board and continue to mess around with it. I would appreciate any feedback I can get. Thx again.

K7N2G-ILSR: BIOS Flashing

I am using Win XP PRO with NTFS file system. I plan on flashing my Bios on K7N2G-ILSR from 1.1 to 1.2.
Should I follow the regular procedure of make a DOS boot disk from winXP and flashing it from C drive
OR
use the method described for "Flashing the Bios using Non Fat File Sytem" (Using RAM Drive)?
I would really like to use the regular procedure, since it seems to be easy and I fully understand it.
Your input will be greatly appreciated.

just use live update ,it does it ntfs way for you
c way will not work

K7N2G-ILSR Live update 3 PROBLEMS

Trying to download the following 2 updates using Live Update 3 and can't get it done. It will download about half of the files then just stop, seems to me that the MSI's servers are timing out. Sometimes I can download more of the update package than other times but never the complete deal. The download seems to stop at around 3.5MB of 6.53MB for the nForce System Drivers Update ver 3.75. I looked to download the following 2 updates manually on MSI's website but can't find these 2 updates. Where can I get these updates? Does MSI have an FTP site where I can grab these files?? I have 1.5Mbps cable connection and don't have problems downloading from any other places. Thanks for the help!
NVIDIA nForce System Drivers
Item Name NVIDIA nForce System Drivers Update
Current Ver. 2.78 Online Ver. 3.75 Size 6.53MB
NVIDIA nForce2 VGA Driver
Item Name NVIDIA nForce2 VGA Driver Update
Current Ver. Unknown Online Ver. 6.14.10.4524 Size 19.14MB

just get nvidias drivers as they are newer any way nVidia Drivers

K7n2g-ilsr Promise bios doesn´t show

--------------------------------------------------------------------------------
k7n2g-ilsr Bios 1.2
AMD XP2400+ 2Ghz
2*256MB DDR400 Dual
Geforce 2 MMX 200 64MB (AGP)
1 HDD 80GB Seagate SATA
I turn on my computer and fasttrack menu doesn`t show
with another HD (on IDE1) and windows XP sp2
I've downlodaded the oficial Drivers: Promise PDC20376 Serial-ATA RAID Utility (37653.EXE)
add new hard->SCSI->WinXP Promise Raid Console SCSI Processor Device
Works right.
add new hard->SCSI->WinXP Promise FastTrak 376/378 (tm) Controller
Yellow (!) and : device can´t start (code 10)
(I chose WinXP directory installing drivers)
What am I doing wrong? Thx.
I've downlodaded other oficial Drivers too: Promise Serial-ATA RAID Drivers (sata48N.exe) and the same problem...
Hard drives are working right, they have been tested.

Quote
I turn on my computer and fasttrack menu doesn`t show
do you mean you don't see the Ctrl + F prompt when you first power up?
try reconnecting the SATA cable, or connect it to the other port. try another SATA cable. try another power connector. try that drive in another system

K7N2G - ILSR problems ...

Right, this is a long story!
I got my K7N2G a few months ago now, started by using PC2100 (Generic, lol) ... it worked quite well - I can't remember getting crashes!
I then upgraded to 2x256Mb PC3200 TwinMOS, not knowing about this whole picky RAM thing - I'd heard it was good RAM so I got me some ... after replacing one because of a bad stick I had both sticks running well, I then started getting lotsa freezing in games (esp. UT2003) and I thought it was just overheating but after doing some overall quietening (Zalman GPU, new CPU cooler), it was still crashing ... then the fan on my chipset died so I stuck a new 40mm fan ontop and seemed allright but was still getting the odd freeze in-game! Eventually was told that the 40mm fan wasn't actually needed so I removed it and things didn't get any worse ...
Untill now, I get crashing in game very often and I have lost my USB ports)!
Is any of this todo with my RAM, or chipset fan removal?
Also this is an engineering release ... is it safe to update it with the latest K7N2G-ILSR BIOS?
I had less problems with my ECS K7S5A, lol!
Thanks for reading and hope you can help ... Alex

Quote
Originally posted by UnrealRocks
Well, thats put a stop to that system ...
Switched it on this morning and BOOM - one hell of a bang and flash ... PSU dead and rest of the system taken with it!
Grrrrr!
Sorry to hear that your dead in the water. :( Since your going to buy a new PSU "DO NOT BUY A QTEC" Stick with an Antec or Enermax 400W+, you may pay a little extra but this is one of the most important components of you system so it's worth it. It will help eliminate a lot of problems in the future.
Rob

K7n2g-ilsr Problems Still Stay:)))

Dear MSI time!Try to install Motherboard MSI K7N2G-ILSR BIOS 1.8 END
TV TUNER MSI TV@NYWHERE MASTER ,OPERATION SYSTEM WIN XP SP1 CPU BARTON
2600+ MEM DDR333 512MB WITH LAST DRIVERS FROM MSI WEB PAGE:)))
WHEN PC TURNOFF BLUE SCREEN:)SOUND FROM TUNER WORK 5 MIN END GO OFF:)
IN BULGARIA TV SYSTEM IS NOT SEKAM:)))
wHEN DRIVER MSI8606 AUDIO CAPTURE DISABLE BLUE SCREEN NOT.
TRY USE DIGITAL CAMERA FROM MUSTEK GSMART LCD2 PROBLEM COPY PIC FROM CAM
ERA TO PC:)))CAMERA WORK PERFEKT WITH OTHER PC..S ,I TRY WITH 5 OTHER..
I TRY OTHER MTHERBOARD MSI K7N2G-ILSR PROBLEMS STILL STAY:)))
I WORK WITH PC..S 10 YEARS END SUCH unseen, compatible SYSTEM FROM MSI...
Congratulate s. o. on his success!!!!

Quote
Originally posted by BG-User
i have 8 pc...s:)))but this MSI System is "N1":))
I do not need help MSI needs help:)))
Hi BG-USER,
Since your not looking for help I guess you are posting on here to complain to MSI. None of the people in this Forum are MSI employees so they won't get your message. Complaints are made by contacting MSI directly. You can call them or e-mail them.
Cheers

K7n2g-ilsr Promise drivers Windows Xp

k7n2g-ilsr Bios 1.2
AMD XP2400+ 2Ghz
2*256MB DDR400 Dual
Geforce 2 MMX 200 64MB (AGP)
1 HDD 80GB Seagate (S.O) IDE1 (Master)
1 DVD-R IDE2 (Master)
1 HDD 20GB Seagate IDE3 (Master)
Windows Xp Pro Service Pack 1
I wan`t this configuration (pay attention to IDE3) and I have this problems:
SETUP:
I didn´t found anything about RAID, IDE3 or PROMISE.... on Bios
and it doesn´t show fasttrack menu; CTRl + F didn´t work too.
WINDOWS:
I've downlodaded the oficial Drivers: Promise PDC20376 Serial-ATA RAID Utility (37653.EXE)
add new hard->SCSI->WinXP Promise Raid Console SCSI Processor Device
Works right.
add new hard->SCSI->WinXP Promise FastTrak 376/378 (tm) Controller
Yellow (!) and : device can´t start (code 10)
add new hard->SCSI->WinXP Promise FastTrak 376/378 (tm) Controller
Yellow (!) and : device can´t start (code 10)
(I chose WinXP directory installing drivers)
And obviously my second HD doesn't appear anywhere...
What am I doing wrong? Thx.
I've downlodaded other oficial Drivers too: Promise Serial-ATA RAID Drivers (sata48N.exe) and the same problem...
Hard drives are working right, they have been tested.

I´ve updated BIOS to 2.0 version (the last one) and I´ve boot up only with a seagate HD(80 GB) on IDE3... and the same....
I´ve written to:
[email protected] and here it´s their answer:
Would you please make sure you have done as follows?
1. connect the HDD to IDE3, then boot up system. There should be Promise BIOS reminding you to enter setting arrays. Please enter to set Performance mode. (It is the MB's special feature. Though you use one HDD, you should set an array.)For how to set it, please refer to the manual. It should be described in the manaul.
2. then enter OS, go to the following link to download Promise Serial-ATA RAID Drivers and install it.
The problem is still the same... menu for Promise BIOS doesn´t pop up after booting up, that should mean that Promise BIOS doesn´t recognize the unit so I don´t get to second point and windows doesn´t acknowledge the new hardware, and still displays hardware with yellow exclamation mark (code 10). Do you have any idea? Thanks a lot

K7n2g ilsr just wont reboot normaly

well i have a k7n2g ilsr bios 1.4
and a 1.7ghz amd xp+
pc 2700 333 mhz 256 ddr ram brand infineon HYB25D256800BT-6
maxtor sata 80 gig 8 mb buffer
aopen 350 watts power supply
still this is a very simpel machine
and it wont run on 1.7 as it must i know it runs on 1433 or something more but windows says its a 1600 +
it wont reboot right i have too shut of the power completly wait for more than a min than boot it up again
dont think am a newbi
i am building pc's for over 5 years now and never did i see this
i changed 3 times from cpu
no difference
changed from ram still same prob
funny thing is when its running its runs so stabel
and i would realy like this mb too run properly cause it will end up in my tuned car 8) :p

well i aint a newbe and all my settings are too normall specs...
i am using the igp card
still i think its the memmory
those bast@rds from the shop d@mn them
i asked a pc 3200 en they given me a pc 2700 grrr X(
strange think is when it has booted it runnens like a dream its even faster then the laptop of my friend and thats a 2.6 p4
intel sucks whoehahaha
am thinking of getting some other ddr ram
or maybe a new power supley
still i wished msi would write a new bios that correct this failure on this kind of ram if they do
i buy my self 3 other boards of the same type
cause it rules
WHEN IT WORKS!!!!!!!!!!!!!!!!!
grrr
X(

USB 2.0 problem (K7N2G-ILSR and HP PSC 2210)

I'm using a K7N2G-ILSR mainboard in combination with a HP PSC 2210 all-in-one printer. The printer sometimes stops printing and produces an error. The print can not be deleted and I have to reset the computer.
I'm using the latest HP drivers for the printer, Windows XP Pro with all Windows Update fixes and the latest upgrades for teh mainboard (Live-Update).
Is this a known error and is there a fix/workaround (can I set the USB in the BIOS to 1.1 only (instead of 1.1 and 2.0)??
According to HP it is related to the chipset and the USB driver. Until now I have not find a document explaining the problem for this mainboard and a proper solution.
Does anyone have an idea?
Thanks for your help!
Cees

Cables are cables still at this point in the game so it could be that you have a faulty cable but there are no special 2.0 cables to buy...
Never been a big fan of the All-in-one printer/scanner/copiers, I've had nothing but problems most of the time when my clients buy them...but they still buy them...if you think about it they really only came out just over a year and a half ago so that technology isn't quite mature yet...
I doubt that it has anything to do with your setup directly, it sounds like a driver issue and one that's clashing with another driver that's used for something else in your machine...no I don't know what cause I don't know what you are using in your system heheheh
I had a client that bought one of the newer photo printers, why I don't know cause he doesn't even own a digital camera, but he just had to have one, but anyway, it would error out everytime he tried to print to it...I reloaded his system and systematically added in one component at a time...writing down everything I did...when I put in his ATI All-In-Wonder card and loaded the software for the TV part lo and behold when I printed I got the error again...couldn't fix it for my life either with all the newest drivers from ATI and HP...went backwards in time for older drivers to no avail...the guy stiffed me on the bill for over $1000.00 and I've not heard from him again so I can't tell you if he fixed it or not at this point...
Cheers!! 8)

BIOS failure at startup K7N2G-ILSR

I have just put together a new machine with a K7N2G-ILSR motherboard, an Athlon 2500+ processor, and an IDE disc, not much more than that. At startup, I get the first MSI screen, but when the BIOS screen is then shown, it disappears after about half a second. Instead I get a new screen "Scanning IDE drives", which after about a second gives the message: "No drive attached to Fast Trak controller, The BIOS is not installed".
I cleared the CMOS, and then I actually got the BIOS screen (because it said CMOD CRC error), but the next time I restarted the machine I was back with the same problem as before.
It is possible to enter BIOS setup if I press delete at exactly the right time when the BIOS screen flicker, but I have not find any configuration that would help. Further, after I cleared the CMOS, now my processor is not recognized in detail, it just says AMD Athlon. Before I did that, it actually said Athlon 2500+, how do I make it identify it exectly?
I would really appreciate any advice.
Thanks!

Well, the manual does not say a word about the "fast trak controller" is, and it is not clear what kind of drives that are referred to in that error message. Is this only about Serial ATA drives, or what?
What I have now figured out is that the POST screen (where it is said that DEL will take you to bios) will never appear if the full start MSI screen is enabled, which it is by default. The manual does not say a single word about this, but it refers to the POST screen as the first screen, where one can invoke the bios setup.

Problems installing Windows XP on at K7N2G-ILSR

Hi,
I am having problems installing Windows XP on at K7N2G-ILSR.
Config.
K7N2G-ILSR
With 2 120 GB Western Digital WD1200JB drives
Liteon CDRW and Toshiba DVD
Memory ME-512MB-PC2700 DIM/DDR333/512MB/PC2700
Bios settings are all set to default. And at 4/2003 version
The WD drives are plugged into IDE1 with one as Master and the other Slave. The CD & DVD on the IDE2 with the CDRW as master and the DVD as Slave.
Boot to Dos the Drives are seen with no problem
Try doing a clean install and the System always hangs after initial driver load and Hangs when Blue Screen states "Setup is installing Windows"
Any Ideas?
Thanks

Have you tried changing the APIC function in BIOS. Either disable it or set it to MPS 1.1 see if that helps.
Also make sure your FSB is 100MHz and make sure your jumpers on the mobo are correctly set up. There are a lot of installation issues relating to FSB and win XP.
And finally make sure your memory is fully compatible with nForce boards. The default answer to everyone's nForce platform problems.
Psymon

Help needed - K7N2G-ILSR problem

I just got a K7N2G-ILSR mobo and after I installed it, I get an error "NO DRIVE ATTACHED TO FASTTRACK CONTROLLER. NO BIOS INSTALLED"
I downloaded the latest bios and flashed it but I still get the same error.
When I am in the setup, it recognizes my harddrive (which is a Maxtor IDE).
I'm not using serial ATA.
Please help me figure this out.

the problem is that after i get that error message, it takes me to the windows safe mode menu. after i pick a windows mode to start up with, it re-boots only to bring me back to the original error message.
i can't boot into windows.
here are my specs if this helps any...
K7N2G-ILSR
Athlon XP 2600
Corsair XMS pc2700 512mb ram
Maxtor hard drive (8gb)

Great problems with K7N2G-ILSR onboard raid controller

I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
Now my raid controller seems to be dead again cause it doesnt say a word again.
Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

K7N2G-ILSR BIOS 1.3 Problem

Similar Messages

Maybe you are looking for