K7N2G-ILSR-HELP!!!!!!! Please, please, try to reply to it by the end o

:O i recently bought a computer with a MSI K7N2G-ILSR after reading all the reveiws on it. i am 15 years old, and my dad will k*** me ( ;( ), because i have already fried some chips with messing around. Now i have another problem. Everytime i turn on the computer, nothing appears on the screen, but the monitor is working as i've tested it on another pc. the D-LED'S hang on:
1:green
2:red
3:green
4:green
in the manual, it says:
'initializing Floppy Drive Computer'
any help????
also is there anyhting i could do to get some files off the pc, because the only fix will probably be a reformat of the hard drive and i've got to hand in some coursework by next week and its NOT backed up!!! ;( ;( ;(
i have cleared the CMOS, and jumpered it so it would run at 100 mhz but it would still not boot up.
my system specs are:
80 gig Maxtor hard drive
2x128meg ram
cd-rw drive
dvd drive
windows xp professional
microsoft office 2000 premium
p.s also i have noticed some pinging nosies

Im using a K7N2G-ILSR. this is the one with the onboard graphics so adding another graphics card is out of the question. The cd-rom and dvd drive lights flash, the hd light is continuously on. Nope i havnt flashed the bios recently, i havent even changed anything in the bios. the machine is 'booting' upto the 'initializing floppy drive controller'. after that it crashes. nothing is shown on the screen before and after that, not even the companys logo.
b4 this started to happen, i was copying some files from the dvd drive and windows crashed. So i restarted it. An then the problems. All i have got plugged into the motherboard is:
2 sticks of 128mg(unbranded i think) pc2700 ddr sdram (dual ddr)
80gb seagate hard drive @ 5400 rpm i think
A Mentor Modem card using the Intel chip.
DVD-DRIVE
CD-RW drive
i think the psu is 350 watts but im not sure
i noticed the pinging noises when i was writing the first message (After pc f***** up!), and it wasnt from the pc's speaker and it has stopped, i think i was imagining them.
It cant be the psu because it has worked fine until now, and ive been copying cd's from one drive to the other, which would take up alot of power and it was fine.
thnx 4 ur help

Similar Messages

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

Hi,
As the Other threads suggests I would check the Date and Time settings on the Mac and compare that with the settings in the router.
Messages (and iChat before that) send Time stamped info to Login and to send IMs.
Obviously most people set their Macs to their Time Zone and nearest city/town.
What people sometimes forget is that their Router/Modem device(s) have to be set correctly as well.
EDIT
Also Add a Public DNS server to your System Preferences> Network > Advanced Button > DNS tab
A Google one such as 8.8.4.4 or 8.8.8.8 seem to work well for most people
10:15 PM Saturday; March 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

TS4212 can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected. I have been looking for over a week now   and even chatted with the USA but cannot get it to work

can anyone help please.. since iCloud came on the scene My all in one printer keeps saying it is not USB connected.   what do I do
I have been looking for over a week now   and even chatted with the USA but cannot get it to work.
I am really struggling

Thanks
someone named Eloisa   she gave me   a phone no.   or visit hp.com/uk
cannot make head nor tale of it all. I am old. and find everything hard to undertstand

Firefox 3.6.3 wont play embedded youtube videos. It comes up with "an error occured please try again later. this happens all the time

Firefox 3.6.3 wont play embedded youtube videos. It comes up with "an error occurred please try again later. this happens all the time. If you click to go to youtube the clip plays.
== This happened ==
Every time Firefox opened

I was having the same issue up until I found a solution myself a few minutes ago. If you have "Accept Third Party Cookies" un-checked it will not allow the embedded "Third party" youtube videos to load. You can either Check the box to allow third party cookies or add an exception to allow youtube.com WITHOUT the www. You just want it to be Youtube.Com.
To do so just go to Tools: Options: Privacy: Exceptions: Type in Youtube.com and click Allow. Then click Close and OK. It should start working immediately.

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

Have you seen my User Tipp here
"Movie Magic" with Stills and Dissolve
When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves - tadahh! - logos appear on white.

I bought a new time capsule. When I try to set it up, at the end, it says an expected error occurred. It now won't recognize my time capsule. What do I do?

I bought a new time capsule. When I try to set it up, at the end, it says an expected error occurred. It now won't recognize my time capsule. What do I do?

Do not setup a TC over wireless.. it is like sitting on the branch you are sawing off.
Plug it into the computer by ethernet.. press and hold the reset until the front LED flashes rapidly and start over.

Unable to purchase, please try again later when I access the Apple store

Has anyone come across the strange issue, I got the iphone 5s, jus 3 days back, when I click on any app in the APP STORE, it says "Unable to purchase, please try again later". Please help me in this regard.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I use OSX version 10.8.5 and iphoto on a MAC. I upgraded to elements 12 and in IPHOTO it keeps going to Elements 9??? Help please - how do I make it reference the new version???

I have a MAC and use IPHOTO and had used Adobe Elements 9 as the external Editor and IPHOTO as default. NOW I upgraded to Adobe elements 12 and IPHOTO only recognoizes Adobe Elements 9??? HOW do I make it go to the new external editor?? I appreciate any help you can provide?

You need to reset the external image editor in iPhoto's Advanced preference pane to the right version. I assume there's an Adobe Photoshop Elements 12 folder in your Applications folder. This screenshot is for PSE 10 but would be the same for 12:
Happy Holidays

I really need help asap please..i have deadlines.."the end of file reached"

im currently running logic pro 7 academic on my g5--"the end of file reached" pop up occured (i think it was error code 43) and it said something about preferences i accidently hit the save button and i guess it saved the preferences(since then it has not popped up again)--i cannot hear anything from any of my files--all i am able to is basically look at the arrange window with 4 audio tracks and tracks from my keyboard---when i try to create audio instruments a pop up says "no more tracks available"--ive reloaded both of the logic discs and still am unable to get anything to work

OK, that's quite a lot in one go...and you have deadlines..let's see if we can clear things up?
You say you cannot hear anything...Have you ever had output coming out of Logic or is this your first try? If you can't hear anything, how on earth are you recording?
(I take it the "end of file" message shows up while recording?)
Are you using an audio interface or running straight out of the G5's internal audio card?
I've never had that "end of file" message but I suspect it can have something to do with the maximum recording time.
You set it under the Audio menue/Set Audio Record Path (Apple/A)
Now, to the Tracks:
Have you ever run the Set-Up Assistant (Logic Pro menue/Preferences/Logic Set-Up Assistant)? If not, I recommend you do. Here you can set the framework for your Audio Environment, How many tracks, busses etc.
Sorry if this is too basic for you, i'ts hard to tell how deep in to the application you are.
Good Luck,
Erik

Etude Ringtone HELP - Please see and Reply

I was a proud owner of a Nokia 6230 and now I upgraded to a 6230i.
Guess what the Etude ringtone that was extremely helpful as an ALARM Tone is no longer there. Any help from where i can get it?
I am not hearing the new alarm resulting in going late to work and risking my job
Don't let this happen !!!! Please Please
HELP !!

I am having the same problem too would like to find out how to fix it ?
Cheers.

MSI K7N2 Delta-ILSR Help Please.

Hi all
I have a MSI K7N2 Delta-ILSR motherboard that im putting together and I have a question.
In the middle of the socket where the CPU sits is a small CPU thermal protection sensor, my question is that the sensor is higher than the socket and will be touching the CPU when it is inserted is this normal or should sensor be bent downward so not to be in direct contact with the CPU?
I would not be asking this question if not for someone telling me not to put any external case sensor on the CPU direct only on the heat sink but in this case its built into the motherboard itself. Best to be safe than sorry I thought.
Many thanks

Hi Andy
I too have just bought an MSI K7N2-ILSR. On mine the sensor is bent down so as not to contact the cpu. Was like this when I bought it so I would suggest that it is not supposed to touch processor

Wireless help please!! I have tried ALL the sugges...

Hi There
Please help me!
We have had infinity for a few months now, over the last few weeks we have had countless problems connecting.
The wireless connections are constantly dropping in and out, all day long, on the laptops and phones.
I have tried changing the wireless channels, the encryption settings, wireless connection speed, each time I have changed something I have applied changes and tried each device to see if anything has improved.........
My iphone now point blank refuses to connect and the android is also swapping between BtFon and our hub every 30-60 seconds!!
Please help, this is driving me insane!
Thanks
Sara

hi have a look at this link and see if it helps http://www.btinternet.com/~cbeddoe/wireless/hub3_wireless.html
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

When trying to save page in Yahoo! Bookmarks, I receive blue screen with message:A problem occured while trying to save bookmark. Please try again later. I get the same message every time.

When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??

At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :)

K7N2G-ILSR-HELP!!!!!!! Please, please, try to reply to it by the end o

Similar Messages

Maybe you are looking for