K7N2G-ILSR MS-6570 Restart Problems!

K7N2G-ILSR MS-6570 Restart Problems!
Has anybody else had a problem like this . . .
Ive got this problem with two machines now!!!!
Say for example you boot your machine and go into the bios to change whatever. Then save and exit. It should reboot and carry on to go into windows (or whatever). BUT . . . both of my machines restart and then just sit there and give a long beep which then repeats.
If I turn the machine off completely then back on it starts up ok with any changes to the bios kept from last time.
Can anybody help?!?!??! ;(
I have updated to the latest bios (which is 7.2)

I now have the MSI K7N2 Delta-ILSR (601-6570-030).;
On the box:- NVIDIA nForce 2 Ultra 400 Chipset Based.
K7,nFORCE2 Ultra400/SPP,MCP2-T,FSB400,D-Bracket2,Round cable,2*SATA&power cables,1394 cable,S-Bracket,WinDVD4.
I have 2x256 PC3200 Corsair DDR and a XP2800 Barton, tried and tested at 240fsb(237fsb Totally stable), And I get the same thing happening to me..Also this board and the last one will NOT do the claimed 400fsb..
And dont say it's the ram because it's not, the ram and CPU are fine.... It's the Motherboard that is incompatable with the Ram & CPU
why because my Ram is Corsair(the name speaks for itself) and works in every system to date!.. The CPU is AMD also works in every system to date!
Soon as i get around 193+(fsb) it starts to do the same thing wont reboot, and does the beep thing! at 200x7 200x7.5 200x8 200x8.5 200x9 200x9.5 200x10 200x10.5 200x11 200x11.5= NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING NOTHING but BEEP ......BEEP.......BEEP.
I also bought a brand new Antec TRUEPower550Watt with front voltage control (£100+) and that still does,nt do it
this is my second board, and im totaly fed up with there crap board. I spent good money for this TOP Class Ram and dont expect to be told the Rams wrong when it works in every other system i have had my hands on!!!!!!!
MY advice is send it back and get an other and if thats no use send it back again and get a refund and buy an ABIT NF7-S.. with exactly the same components i get a fsb of anything(100) upto 240fsb abit..
SIG is old board

Similar Messages

K7N2G-ILSR MS-6570 fsb cpu can't change specs

How do I change fsb and get cpu better performance.
The jumpers J10 set 133mhz
J11 " Short
My cpu running at 1.25mhz not 1.667mhz
Bios shows FSB@100
If I change CPU to 1.667 and fsb to 133 system hangs on windows desktop
K7N2G-ILSR MS-6570
AMD 2000+ AthlonXP
Seagate 60gig hdd
750mb RAM
Samsung Combo CDR
XP pro

then you got the cooler install wrong,have a weak psu,or very poor ram

MSI K7N2G-ILSR onboard video initialization problems

Hi, today I replaced my wife's trusty Abit KT7 motherboard with a MSI K7N2G-ILSR. I used the onboard video since she doesn't play games. Everything seemed to be working fine until I went to boot it up. The computer started up as usual, but the monitor did not intialize like it should. The message on the monitor said that " the monitor was working correctly and to check the cord or the computer." I rechecked all of the connections and everything seemed to be installed correctly. I thought that maybe there was something wrong with the onboard video, so I decided to install the Radeon 9000 that was in the old system. To my suprise I received the same message when I started the computer up the second time. I have built several systems and have never encountered a problem like this before. I read the thread about problems with the Radeon cards, but no one mentions anything about problems with the onboard video. I am using a Duron 750, Antec 330 watt PSU and 512 megs of Kingston Value Ram. I know that several posters have recommended that nforce 2 users need a more pwerful PSU and better ram, but I have a hard time beleiving that those things would cause the video not to intilaize. I would appreciate any feedback and/or suggestions because I need to make a desision about hwat to do with this board. Thx.

Well I appreciate the replys. I formated the harddrive before I installed the motherboard because I was worried that the via drivers would cause problems when I booted it up and installed Win XP. Bonz, you are right, I am just guessing that everything is OK since I can hear the system start up, but I can't see anything since the video never intializes. I rechecked all of the connections and even took the motherboard out and reinstalled the cpu, memory and motherboard and the same thing happened. I started thinking something was wrong with the monitor so I unplugged the monitor from my system, which I know works, and it did the same thing. I just wish I could get the video to intialize so I could see to get into the bios to look around. I will check the jumpers on the board and continue to mess around with it. I would appreciate any feedback I can get. Thx again.

K7N2G-ILSR BIOS 1.3 Problem

8o
have a K7N2G-ILSR and flashed lastest bios but no work for me...?
CPU: AMD Athlon 2700+
Video: ATI Radeon 9700 Pro
Memory: Corsair 512-XMS3200C2

mrbig,
Try removing the power cord from the power supply and the battery from the motherboard and leave them out a good 15 to 20 minutes before putting them back in.
Good Luck,
Richard

K7N2G-ILSR MS-6570 barton 3000 support?

I'm just about to buy a new system with the K7N2G-ILSR, and i'd like to know if it supports the barton 3000.
The specs of the new computer are as follows:
2x samsung 512DDR 2700 Ram
Sapphire Radeon 9800pro
Barton xp3000
Noise Control Copper heaven HS
2x Maxtor 80GB 7200/8096KB Plus 9 - 8MB Cache
NC Enermax 430W Low Noise
NC BigTower Black/Silver w/magic fleece
Plextor PX-W4824TA, 48/24/48 IDE,4mb
Asus DVDx16 / CDx48, E616, IDE100
WinXP home
Any suggestions to changes to the above are appreciatet.
Thanks

According to MSI's CPU support page the K7N2G-ILSR does officially support the XP3000+ Barton with 333Mhz FSB but not 400Mhz FSB. If 400Mhz FSB support is important to you you may want to consider as an alternative the K7N2 Delta-ILSR which should be available shortly (end of the month?). Details here of CPU support:-
K7N2G-ILSR
K7N2 Delta-ILSR

MSI K7N2 Delta-ILSR (MS-6570) BSOD problems grrr

I recently purchased this board and although it is an awesome product, I'm having a problem with BSOD's when I play a game for a certain period of time
Specs:
MSI K7N2 Delta-ILSR (7.6 BIOS)
AMD Athlon XP 2800+ Barton
512MB (2x256MB) Samsung PC-2700 DDR memory (2.5-3-3-6 1T)
MSI 128MB GeForce4 Ti 4200 (4X AGP)
NVIDIA nForce on-board sound
Western Digital 80GB drive w/ 8MB cache
MSI X48 CD/CD-RW/DVD combo drive
Windows XP Professional SP1
PSU:
Turbolink 420watt (came with case)
+3.3V is 28A
+5V is 40A
+12V is 18A
So what happens is I get a STOP error during the game that shows the kmixer.sys driver as the culprit. Sometimes it's accompanied by PAGE_FAULT_IN_NON_PAGED_AREA too. I read somewhere that kmixer.sys has to do with windows audio and that it's a 3rd party driver issue or a memory issue. I'm using the latest NVIDIA 3.13 nForce platform drivers. I ran Memtest lastnight for 12 hours straight and 0 errors. I'm thinking the memory may not be compatible with the board nor dual channel, is this possible? I have also tried several different drivers for both video and chipset including MSI's own and I still get the kmixer.sys BSOD when playing games. My previous motherboard was an MSI KT3 Ultra2-R (MS-6380E) which I had no issues with. Any help would be greatly appreciated. Thank you in advance.
--Update--
I just tried to play a game with audio disabled and it crashed this time with DRIVER_IRQL_NOT_LESS_OR_EQUAL with nv4_mini.sys as the problem. My IRQ table shows some sharing, but device manager shows no conflicts.

Ok I tried running the DTM-CB3 module which is nForce2 approved at 3-4-4-11 2T timings and experienced the same result even at 2.6 and 2.7v. I tried both in dual-channel and same thing happened. However, I downloaded a program called Prime95 and ran the CPU torture test and the system returned a fatal error within the first few minutes. CPU Temp was at 57 C and the warning beep (set to 60C though) sounded intermittentley which is strange. I let it cool down then ran the torture test again and about 5min. later the system either seized completely or the program crashed. IE has also crashed randomly on me. I did this several times, before trying a different FSB/DRAM ratio. So I left the system at 200 FSB and used a 6:5 ratio so my memory was running at DDR333 and processor was a 3200+. I ran Prime95 again and the system locked up just as it did the other times. So after I did this a few times with consistent results. I went back and set the FSB to 166 and tried a 5:6 ratio so the memory was DDR400 and processor was the normal 2800+. I ran it again and to my suprise it passed all the tests and after an hour of this, I tried a game and that was perfectly fine as well. I checked the temps and CPU was only 45 C this time. So I'm thinking the processor can't handle anything above 50C or it's just plain overheating. I ordered a Thermaltake Silent Boost HSF today which is tested up to 3400+ so this should fix my problem. If not, then I'm going to replace the memory with a 512MB Geil PC3200 golden dragon dual-channel kit.

K7N2G-ILSR Live update 3 PROBLEMS

Trying to download the following 2 updates using Live Update 3 and can't get it done. It will download about half of the files then just stop, seems to me that the MSI's servers are timing out. Sometimes I can download more of the update package than other times but never the complete deal. The download seems to stop at around 3.5MB of 6.53MB for the nForce System Drivers Update ver 3.75. I looked to download the following 2 updates manually on MSI's website but can't find these 2 updates. Where can I get these updates? Does MSI have an FTP site where I can grab these files?? I have 1.5Mbps cable connection and don't have problems downloading from any other places. Thanks for the help!
NVIDIA nForce System Drivers
Item Name NVIDIA nForce System Drivers Update
Current Ver. 2.78 Online Ver. 3.75 Size 6.53MB
NVIDIA nForce2 VGA Driver
Item Name NVIDIA nForce2 VGA Driver Update
Current Ver. Unknown Online Ver. 6.14.10.4524 Size 19.14MB

just get nvidias drivers as they are newer any way nVidia Drivers

K7N2G-L restart problem

Hi
If I do a cold start my system will boot up ok,but if I have to do a "restart" after installing something it boots up and the gets to the part where it says "Searching for IDE devices" and it will hang.If I power off and then on again it will boot up normaly.Apart from that it runs well...any ideas ?(
Athlon xp 1800+

Running The K7N2G-ILSR
Antec Case, with 360 Watt power Supply.
Dual SATA Raptor 37.5 Gig WD Drives Raided
Dual WD 80 Gig 7200 RPM Drives
Single Maxtor 120 Gig 7200 RPM Drive
52x24x52x CDRW
16X DVD Rom Drive
Athlon XP2500+ Barton Core CPU w/Full Copper Heat Sink
dual 512meg DDR 333 in slots 1 and 3
Radeon 9700 Pro 8x AGO 128 Meg Video Card
4 80mm Cooling Fans Throughout the case.
CPU Temp runs on average between 50c - 60c
Case Temp runs on average about 89f - 100f
When I set this thing up I had a 300 Watt supply and it did not fully run things and did have some problems with the HD lights staying on, my guess was due to not enough power. So beefing it up to 360 Watts fixed that.
Also had restart problems quite often, at least 3 or 4 times a day it would just reboot on its own, I run and operate a computer store , so I had the ability to try different things to fix this. Turns out the memory on the nForce chipset boards is VERY important. Brand new sticks from a variety of sources had different affects, including not counting all the memory properly, restarting randomly and not booting at all. Believe it or not, one of the cheapest memory makers on the market seems to have been the best for use in the machine and that would be the Kingston Value Ram. So, if at all possible try getting some of them and see what happens. The worst??? All Components Memory.
You guys should also look at the 4 lights that are or should be in the back of your machine provided by MSI for your troubleshooting aids.. They do work and are quite helpful.
Sorry for the lengthy message post, but thought maybe I could be of some help to somebody.

Great problems with K7N2G-ILSR onboard raid controller

I have really great problems with my s-ata raid controller. First of all i had a 40GB HDD attached to IDE3. Worked really fine.
Later on my system crashed and my raid controller seemed to be dead. (no "no array is defined" no "press crtl-f to enter setup,...).
Then I attached a s-ata drive to the first s-ata interface. Suddenly the raid controller said: "no array is defined, press ctrl-f to enter setup". I entered setup an built an array an restarted my computer. Again: "No array is defined, press crtl-f to enter setup."
Now my raid controller seems to be dead again cause it doesnt say a word again.
Please help me if you can. (Besides i tried to solve the problem with updating my bios. I tried all versions from v1.0 to v1.3 but there was no result.)

I have already tried two different types of Ram. 512 MB DDR 333 (I don't know the timing exactly but it's a CL2.5 Ram) and another one from a different manufacturer. Also DDR 333 CL 2.5. Then I combined both. But the raid controller didn't show any reaction and I can't imagine that the problem is the power supply because everything else works fine. Anyway... I will try to get a new K7NG2-ILSR on guarantee, sell my whole computer and buy the new K7N2-Delta because I have only problems with the K7N2G-ILSR.

K7n2G-ILSR, Mouse problems

I have been having a lot of issues with my mouse since I got my K7N2G-ILSR MOBO. If I use the PS/2 connection; if I have to reboot after installing a program or something the mouse no longer works and I have to reboot again and it works fine. That is the task everytime I have to reboot.
I thought maybe there was a grounding problem with my mose connector or my PS/2 connection on my MOBO, so I went out and purchased a IBM optical mouse. Problems still persist although they are different ones now. The IBM mouse is USB, if I connect it to any of the USB connections its almost like it doesn't have enough power to run my mouse. The mouse's scroll button lights up blue and when I plug it into any of the USB ports I can see it flash a couple of times, but the light is very dim and then it just goes out and my mouse doesn't work at all. Tried doing the restart process and nothing happens at all. I tried all 4 USB inputs on the MOBO itself and even installed the USB 2 S-Bracket that came with it and the same problem happens in each one.
I just wonder if I should try another mouse like an intellimouse or are my connections on my MOBO just bad or something.
Any help would be very appreciated.
Thank you all,
Demonoids777
Setup:
MOBO- MSI K7N2g-ILSR
HDD- Maxtor 80GB 7200RPM 8MB Cache
2x 256MB PC2100 Kingston Memory
300 Watt PSU
Lite-on CDRW
Lite-on DVD
AthlonXP 2000@ default 1.667MHZ
Antec Aero-Flow Heatsink and Fan

Quote
Originally posted by Demonoids777
The Output is
+3.3V= 28A
+5V= 30A
+12V= 15A
The only problem with this theory is that it did the same thing in my friends case that has an Antec True Power 550 Watt Psu.
Any more help would be appreciated, Thank you.
Demonoids777
The problem is with the board, I've had 2 of these boards, and both of them had a problem with the mouse.
If you get a keyboard and mouse make sure they are both USB, or BOTH PS/2. If you choose the PS/2 option then make sure the keyboard, and mouse don't have any extra features.
It's odd, some keyboards and mice work fine, while others mess the whole computer up.
MSI NEEDS TO FIX THIS!!!
BioHaz

USB 2.0 problem (K7N2G-ILSR and HP PSC 2210)

I'm using a K7N2G-ILSR mainboard in combination with a HP PSC 2210 all-in-one printer. The printer sometimes stops printing and produces an error. The print can not be deleted and I have to reset the computer.
I'm using the latest HP drivers for the printer, Windows XP Pro with all Windows Update fixes and the latest upgrades for teh mainboard (Live-Update).
Is this a known error and is there a fix/workaround (can I set the USB in the BIOS to 1.1 only (instead of 1.1 and 2.0)??
According to HP it is related to the chipset and the USB driver. Until now I have not find a document explaining the problem for this mainboard and a proper solution.
Does anyone have an idea?
Thanks for your help!
Cees

Cables are cables still at this point in the game so it could be that you have a faulty cable but there are no special 2.0 cables to buy...
Never been a big fan of the All-in-one printer/scanner/copiers, I've had nothing but problems most of the time when my clients buy them...but they still buy them...if you think about it they really only came out just over a year and a half ago so that technology isn't quite mature yet...
I doubt that it has anything to do with your setup directly, it sounds like a driver issue and one that's clashing with another driver that's used for something else in your machine...no I don't know what cause I don't know what you are using in your system heheheh
I had a client that bought one of the newer photo printers, why I don't know cause he doesn't even own a digital camera, but he just had to have one, but anyway, it would error out everytime he tried to print to it...I reloaded his system and systematically added in one component at a time...writing down everything I did...when I put in his ATI All-In-Wonder card and loaded the software for the TV part lo and behold when I printed I got the error again...couldn't fix it for my life either with all the newest drivers from ATI and HP...went backwards in time for older drivers to no avail...the guy stiffed me on the bill for over $1000.00 and I've not heard from him again so I can't tell you if he fixed it or not at this point...
Cheers!! 8)

Problems installing Windows XP on at K7N2G-ILSR

Hi,
I am having problems installing Windows XP on at K7N2G-ILSR.
Config.
K7N2G-ILSR
With 2 120 GB Western Digital WD1200JB drives
Liteon CDRW and Toshiba DVD
Memory ME-512MB-PC2700 DIM/DDR333/512MB/PC2700
Bios settings are all set to default. And at 4/2003 version
The WD drives are plugged into IDE1 with one as Master and the other Slave. The CD & DVD on the IDE2 with the CDRW as master and the DVD as Slave.
Boot to Dos the Drives are seen with no problem
Try doing a clean install and the System always hangs after initial driver load and Hangs when Blue Screen states "Setup is installing Windows"
Any Ideas?
Thanks

Have you tried changing the APIC function in BIOS. Either disable it or set it to MPS 1.1 see if that helps.
Also make sure your FSB is 100MHz and make sure your jumpers on the mobo are correctly set up. There are a lot of installation issues relating to FSB and win XP.
And finally make sure your memory is fully compatible with nForce boards. The default answer to everyone's nForce platform problems.
Psymon

Sometimes cannot start PC: problem with Hitachi SATA Hard drive and K7N2G-ILSR

I have major problem with my 160Gb SATA Hitachi hard drive and my MSI K7N2G-ILSR motherboard. Sometimes the PC can be started, sometimes it cannot.
After I installed a clean build of Windows XP Pro SP1 onto my new hard drive (as the only hard drive in my PC) and install all the necessary drivers, the system runs smoothly. However, after about 2 to 3 weeks, sometimes when I start the PC, it cannot detect the hard drive and hence it claimes that it cannot find any VMI Pool Data (i.e. no OS detected). What makes it really horrible is that, it is like the lottery everytime when I start the PC. Sometimes it works, sometimes it doesn't. The highest record was 8 consecutive failures (by resetting or by turning the power off and on again) before I can start the machine properly. Also, the system sometimes just crashes in the middle of operating.
I have already sent the hard drive back to Hitachi. Got the same model of hard drive back as replacement, but the replacement has the same problem, except with the replacement drive the PC can be started eventually after many tries, while with the previous drive it is possible that the PC cannot be started until after a few days later.
Also, it seems that my drive can detect either SATA hard drive or PATA hard drive, but not both. (If I leave my old PATA drive connect in the primary IDE channel, Windows cannot detect the new SATA drive.)
Is my motherboard faulty? Can it only use PATA drive?
My PC's spec is as follows:
AMD Athlon XP 2500+
512Mb PC3200 SDRAM (set to run at 166MHz)
Hitachi 160Gb SATA Hard drive on 1st SATA channel (Model #HDS722516VLSA80)
Sony DVD+-RW drive and Panasonic DVD-ROM drive on secondary IDE channel
Use onboard video (GeForce MX)
US Robotech V92 internal PCI modem
SoundBlaster Audigy 2 Player soundcard
Onboard audio disabled
300W PSU
OS is Windows XP Pro SP1 (with all latest security patches up to date)

Quote
Originally posted by Raven_
Quote
Originally posted by boucher91
Along the same lines the sata drives use more power than the pata drives...
sata usually faster spin rate, pata is slower spin rate...
that is not entirly correct.
many harddrives just come with different ways to connect them.
the only sata drives i now that spins faster is western digital raptors 10k rpm.
all other is running at 7200rpm.
older drives run at 5400rpm
Yes to get the full benefit of RAID, the Raptors are the way to go.Anything else, no significant difference.

Help needed - K7N2G-ILSR problem

I just got a K7N2G-ILSR mobo and after I installed it, I get an error "NO DRIVE ATTACHED TO FASTTRACK CONTROLLER. NO BIOS INSTALLED"
I downloaded the latest bios and flashed it but I still get the same error.
When I am in the setup, it recognizes my harddrive (which is a Maxtor IDE).
I'm not using serial ATA.
Please help me figure this out.

the problem is that after i get that error message, it takes me to the windows safe mode menu. after i pick a windows mode to start up with, it re-boots only to bring me back to the original error message.
i can't boot into windows.
here are my specs if this helps any...
K7N2G-ILSR
Athlon XP 2600
Corsair XMS pc2700 512mb ram
Maxtor hard drive (8gb)

MSI K7N2G-ILSR Problem! Need help!

Hi,i bought a K7N2G-ILSR last year when i was in Germany. This mainboard never worked as well... I wanted to work with Athlon XP 2500+ and Dual Channel 256MB+256MB=512MB 400 Mhz DDR-Ram. It hasn't worked when i first wanted to use and i changed the jumper to the securit mode than it worked but it has never opened with one button pushing.I was always trying to get screen vision with 3-5 closing and opening.One day i tried to get the jumper back and i tried to open but it never worked. I got the jumper securit again but again never worked. I tried everything but it never worked after that event. Normally i had to inform it at first and give it back or give it to the repairing but i couldn't have time. Now i have to do it this time. Now i want to change this or something else but in Turkey. I am living in Turkey and does MSI Support Centre change it or repair it? What can i do to get rid of this problem. Need help!
Thanks for your helps from now!

MSI K7N2G-ILSR Mainboard 11X166
AMD Athlon XP 2500+
2X256 MB PC 3200 Twinmos
OnBoard Graphic Card
Samsung 40 GB 5400rpm HDD
300 Watt Power Supply
I dont have more infos but i can find out if you want...

K7N2G-ILSR MS-6570 Restart Problems!

Similar Messages

Maybe you are looking for