K7N2G-L Video and temps

Gidday all
Is there any way to use the onboard video AND an AGP card at the same time? I replaced my Soltek motherboard with the MSI K7N2G. I use 2 monitors and can't get the 2 to work together on the MSI board. I have tried an nVidia 64MB AGP and a CM32 (32MB) AGP card without luck and using an 8MB PCI card in the meantime.
Maybe a dumb question - but the Soltek worked with the onboard AGP and the nVidia AGP card.
The PC alert panel shows my CPU @21 degrees and system@30 degrees.
However Sandra shows CPU@32 degrees and system@28. Is the PC Alert panel usually out by this amount?

No, when you plug a board into the AGP slot it cuts off the on board video.
Try this Speedfan

Similar Messages

New Media Encoder Error: video and/or audio filters are missing...

My colleague reported this error popup window while using Adobe Media Encoder CC (up-to-date):
"video and/or audio filters are missing and the rendered output may not match the original"
I've been seeing similar errors the past few days. I can't remember if the wording was the same in the errors I saw, but the circumstances were the same.
I've never seen this popup error before the most recent CC update.
Some background info:
I queued up multiple Premiere Pro pproj files as usual from within Premiere
without rebooting or deleting any cache or temp files or anything, I start the queue
I have no special plugins installed in Premiere. Vanilla CC install.
Windows 7, 64-bit
This error doesn't tell me what audio/video filter(s) are missing. The output files, once I dismiss this warning, are perfect.
The major problem: It stops the queue dead in it's tracks. Sure, it might seem handy to stop and give you a warning, but when it's a false report and there's nothing wrong, it's killing us, because we queue up multiple files for encoding overnight, and we're not here to get the popups.
What is likely causing this? Is it a bug that this is appearing so frequently? Has anyone else experienced this besides my colleague and I?
Thanks!

Update for anyone experiencing this issue:
We are still investigating the cause of the issue and would really like your help tracking it down. If you run in to it I would be happy to jump on the phone with you and preferably do a screenshare as well. If you want to run some tests for me, this is what may help us track it down:
0. Please make sure you are updated to the latest version of Premiere Pro and AME, which at this time are Premiere Pro 7.2.1 and AME 7.2.
1. Simplify the project. Create a copy of the project and eliminate anything in the project that isn't related to the sequence(s) you are exporting. Then run the encode again. If it still occurs, move to the next step. If it doesn't occur any more, repeat step one and only remove half of the unused items (sorry, this is giong to be a manual process). Rinse, repeat.
2. Open your sequence in Premiere and press Cmd/Ctrl + A to select all clips in your sequence. Right click and select Remove All Effects. Export again. No repro? Go to step 4. If it still repros, go to step 4.
3. Make all the media offline. Export again. No repro? Go to step 4. Repro? Go to step 5.
4. Send me a message with as much detail as possible. Even better would be if you could provide me a copy of your project file.
Your help in tracking this issue down is greatly appreciated. Thank you.

Video and display having artefacts

Hi
For the past week or two (maybe its because I am in Greece and the temperature is 36°C and the CPU temp is at 80°C most of the time).
But when I have been capturing video and doing anything that uses a lot of the CPU it seems to have artefacts or stutter on video playback, or the video freezes and the sound continues, etc.
Even on YouTube, etc.
Anything I can do to help this? Zap the VRAM/PRAM??
Thanks in advance

Have you tried the basics?

Videos and pics on Ovi

Hello, all. Just started using Ovi with my N79. I have two problems, and i hope the most experienced users help me out with this:
1)When I use the Sync function, I set it to sync multimedia (pics and vids). The problem is that I dont know where are the files going, despite I set Desktop, I cannot find them anywhere in my computer. I know they are transferred to my pc because of the sync history.
2)When I open the gallery tab, the software begins to search for all the images, videos and music.The problem is that it searches not only for the files I created, but searches also for the temporary files. I have tried to erase the folder from My PC, and still they are shown on Ovi soft. I have tried to erase them one by one, but they are over 20.000 files, so I think it wouldn't be practical. I have attached a pic showing some of the files. I see it this way: Despite I erase the temp folder, the files are still shown, and it's like the gallery needs to be refreshed.
The very first file you'll see, in the red circle, means that it couldn't be open, because I erased the temp folder, but as I say, it is still there. So my question is, is there anyway to "refresh" or make these files do not show up next time I open Ovi Software??? thanks and sorry for being so confusing...
Message Edited by manudrum on 10-Mar-2009 10:43 AM
Message Edited by manudrum on 10-Mar-2009 10:45 AM
Manuel Barragan
Nokia N86 8MP
Attachments:
Untitled.jpg ‏44 KB

Does anybody know, how to store the converted videos onto PC itself...?
OVI Suite converts the videos to mp4 format and transfers it to Phone only. I cannot find the option to store the converted videos to PC.
Since this gives me limitation to always connect my Phone to PC, while converting the Videos through OVI.
What i need to do everytime is start converting video -> it automatically gets uploaded in Phone -> then copy back from Phone to PC.
Instead of this , i want to convert all the movies first directly on to PC..isnt that better option to save the time...?
-Ussher

My Macbook Pro was frozen when I was watching video and reading document. I just purchased this laptop last month. why does it happen?

My Macbook Pro was frozen when I was watching video and reading document. I just purchased this laptop last month. why does it happen?

If your temps are back to normal then the only thing that I would do is to completely uninstall the Avast software. See Thomas Reed's excellent Mac Malware Guide and pay particular attention to the "Do I need a/v software" section. 99% of the time, you don't and Mr. Reed only suggests the use of two av apps.
Clinton

Does DVI to Video adapter send both s-video and composite simoutanesly?

Hi,
I´m wondering if you connect the DVI to Video adapter on the new MacMini (DVI to s-video+composite), does the Mini send BOTH s-video and composite at the same time?
If connected to TV and projector, I want to see both simotanesly, not neede to change something in the setup...
The both having same resolution I guess is a must!
Regards,
Pat

Yes, many think, but i´ve havnt heard anyone whoose sure?! Can´t be such a odd thing, connect a Mini to two displays at same same time...

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Purchased videos and music not playing on ipod

i purchased some music and videos, while using my wifes powerbook g4, loaded them onto my ipod (which i had setup using my pc) now i see the music and videos and when i try playing them the music shows up then goes to the next song. the videos just go to a black screen.
now i have loaded my cd's onto my wifes powerbook and have been able to play them on my ipod no problem. just the purchased music/videos from itunes, is not playing
what did i do wrong.

Did you update the firmware on the iPod? Supposibly if fixes a few bugs.
http://www.apple.com/ipod/download/
If you didn't then try that. Believe me your problem is not with not using that CD as I never even popped the disk in my CD drive untill after I had updated my iPod as the software was outdated before it arrived at my house.

Exit out of video and return to stage frame 1

Ive manged to create a flash player that incorporates a video
using a online
tutorial with the code below.
All is working well but at the end of the video I want to
exit out of the
video and return to the stage at frame 1. The reason being
is; before a user
hits play an interface image (containing info) is displayed.
When they hit
the play button the video appears and plays over the
interface image.
problem is at the end of the video the layer containing the
image is still
covered by the video. when the video finishes I need a line
of code to exit
and return the player to the original state without the
presecence of the
video layer.
any ideas? thanks in advance
Brett
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
rewindButton.onRelease = function() {
ns.seek(0);
ns.play();
playButton.onRelease = function() {
ns.play("modular.flv");
pauseButton.onRelease = function() {
ns.pause();
var videoInterval = setInterval(videoStatus,100);
var amountLoaded:Number;
var duration:Number;
ns["onMetaData"] = function (obj) {
duration = obj.duration;
function videoStatus() {
amountLoaded = ns.bytesLoaded / ns.bytesTotal;
loader.loadbar._width = amountLoaded * 200;
loader.scrub._x = ns.time / duration * 200;
var scrubInterval;
loader.scrub.onPress = function(){
clearInterval(videoInterval);
scrubInterval = setInterval(scrubit, 10);
this.startDrag(false,1,this._y,198,this._y);
loader.scrub.onRelease = loader.scrub.onReleaseOutside =
function () {
clearInterval(scrubInterval);
videoInterval = setInterval(videoStatus,100);
this.stopDrag();
function scrubit() {
ns.seek(Math.floor((loader.scrub._x/200)*duration));

Inside the videoStatus() function Check the Current Time and
Total time for video completion. Some time the Video doesn't have
exact Time when comparing to the Total duration so use Math.floor
to compare. if you still facing problem also check the Buffer
status and Video status too.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

I have an iphone 5s and when I make a playlist on itunes for music videos and sync my iphone the playlist does not show up. What can I do to fix the problem?

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

HT4623 I tried doing my update and it told me I don't have enough storage, so I deleted all of my apps, photos, videos, and music. And it's saying I still don't have enough storage. Any suggestions?

I tried doing my update and it told me I don't have enough storage, so I deleted all of my apps, photos, videos, and music and I still don't have enough storage. Any suggestions?

Do you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I'm trying to download netflix aand it keeps telling me not emough space to delete videos or pictures but i have no videos and have only 60 pictures. any help?

I'm trying to download netflixs to my ipad but it keeps telling me to delete videos or pictures. I have no videos and have 60 pictures. I need some help.

What may be taking up your iPad's memory may be not photos or videos, but rather music and apps. Music itself should not be that much of a problem but if you have a very large library it will obviously take lots of space. Your iPad tells you to delete photos or videos because you can delete them from the iPad directly, but you cannot delete music until you sync to iTunes. You may also want to try deleting some apps such as games; these usually take lots of space (up to 1GB each). These apps will sync back to your iPad when you have access to a computer once you have freed up enough memory on your iPad.
Hope this helps.

New to iMovie, create live video and audio?

Hello, I am trying to create a video of a live musical performance to post on youtube and have figured out how to use the isight to get a video but can I use the biult in mics to record live audio with the video?

Hello, Nateomite
As Karsten says, you will certainly get better results and much more convenience with a camcorder.
However, if you decide to use your MacBook, the built-in mic can record audio with your video:
in iChat: iChat > Video > Record Chat records both video and audio.
in iMovie: http://docs.info.apple.com/article.html?path=iMovie/7.0/en/10172.html
tells you how to record using your MacBook's built-in iSight (and mic.)
Other movie/video recording apps may work differently, but most allow sound with video.
EZ Jim
Message was edited by: EZ Jim for other apps
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

K7N2G-L Video and temps

Similar Messages

Maybe you are looking for