K7n2g on board graphic card

Hi,
I ve K7n2g and I couldnt use my on board graphic card
I couldnt set it up to 1152x864 and I coudlnt see healty
destop it was full or broken lines white lines I used
last vga driver for it but I didnt take any succesful result.
bios 3,3
amd xp 2200+
live!
creative v90 modem
512mb Twinmoss DDR

Hi,
Does it work OK using 1024x768?
Does your monitor support 1152x864?
Axel :D

Similar Messages

Disable on board graphics card

How can I disable the on board graphics card on my P&-1227c? I am trying to install an new video card and it keeps coming up blank but when I take it out everything works agian. It came with Windows 7 installed so I do not have the secure boot configuration in my BIOS. My BIOS is the 7.7 version for the Jasmine motherboard. Is there a new version I can download?

Thank you for the additional information.
I have reviewed the specs of the video card. It appears to require a minimum of 400W. Your new PSU should take care of the problem. Corsair sells very good products.
The only BIOS updates that will work with HP motherboards are those provided by them. None of the retail versions will work properly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

K7N2G.LISR internal graphics card not working

After building a new pc with msi k7n2g-lisr I can't play 3d games because after 10 seconds or less windows close the game and appears windows desktop.
I've installed an external video card and everithing works fine.
Does anybody know how can I use the internal video card?

Hi Wonkanoby,
Thx for the link! I am aware that also other people have had the same problem as I have not only with the Crucial but also with other RAM modules.
I did plan originally to get hold of 1 Gig's worth of Corsair as it looks most likely to work but it crossed my mind that I think it will not be a 100% stable system still :(
Following this I contactd Crucial directly because I wanted to send the RAM back to them so I could be credited. The employee had a word with the enginneer and he explained that Crucial could replace the module and give it another try as they were aware of a problem with the K7N2G-LISR board?? Looking on the paperwork that comes with the module it does say "Upgrade for a MSI (Micro Star) MS-6570 (K7N2G) system)". I only mentioned that I had a K7N2G motherboard and there are all the other details there so it seems that even Crucial know about the problems with this m/b. I took their word for it and would decide to give it a try in the hope I could finally sort this problem out but unfortunately it is the same problem :(
The only thing we can wait for now is a strong BIOS update (see my post in the BIOS section) which will fix these problems with the NforceII chipset. How long we will have to wait is another matter. I for one cannot wait to long because I bought my board from E-buyer and their policy of RMA is 28 days or even shorter I think (cant quite remember). I hope MSI can supply because the board is impressive if it did work.

UPGRADED MOTHER BOARD, GRAPHICS CARD, CPU. AUDIGY NOW NOT WORKING PROP

Any advice you could give would be great.
just installed gigabyte 95p main board. PCI express Inno3D Geforce 6600GT graphics card. P4 3.4Ghz CPU and Gig ram.
I have an audigy platininum with dri've bay.
It keeps crashing the system. the mixer dont work nor the remote.
when re-installing drivers, the system crashes. I've downloaded latest drivers.. the system crashes when I try to install them. each crash gives me the blue-screen-of-death then restarts the system. I cant see any conflicts, I'm not a novice but I dont know much about the the registry or irq's etc.
Yours Hopefully Chris

Hi
Error Message: "BAD_POOL_CALLER Stop 0xC2."
Translation: You're trying to print or use Windows Explorer to open a document that
contains a bad or corrupted font.
Solution: Microsoft determined that this is a problem with Win2000 Professional,
Win2000 Server, and Win2000 Advanced Server. A hot fix is available by contacting
Microsoft Help And Support via phone (visit the Help And Support site at
www.support.microsoft.com to obtain an appropriate phone number). However, keep in mind
that Microsoft recommends installing the fix only if you're experiencing a problem and
that you will be charged a fee for calling the Microsoft support number unless the
support staff determines that the update will resolve your problem.
.jtp
P.S.
Did you had Dr.Watson running when crash occurred. Utility writes (append) all the
information into a file called 'drwtsn32.log' (path C:\Documents and Settings\All
Users\Documents\DrWatson). Recent information is the last one.
.jtpMessage Edited by jutapa on 03-20-2005 09:55 PM

Graphic card help for Pr and Ae use

Hi there great community :)
I'm currently working with only the on-board graphic card, and of course I should upgrade as my GPU is working on 99% on large renders and they are slow...
I've been recommended the GeForce nvidia 2-4GB gtx 760, but neither the 750 or 760 are listed as supported graphic cards in the premiere cc system requirements.
Is there a reason for this or should I ignore that?
Is there a good reason for spending a little extra cash on the 4 GB vs the 2 GB card ?
What exactly will a graphic card do for my performance? (I'm not a computer expert)
My general use is premiere cc and after effects cc
Hope you'll help. Greatly appreciated!
Nice weekend to all :)
- Simon

Premiere accelerates both playback and export with the GPU. AE Ray Tracer acceleration is far more limited and will only be used for a limited functions.
Eric
ADK

Installing new graphics card in hp p7-1155

I have a new EVGA GEFORCE GT730 2GB GDDR5 graphics card and am ready to install it in the above box.
Haggiscat suggested this board thru a previous post on this site. I have printed out the install directions from the hp help so I have the mechanics of how to install this thing. Those directions say to disable the on-board graphics card first, then go into the box and install the new card. My question is: Do I need to do anything else first such as downloading the driver first/delete the old driver first.etc? Also, I have a disc that came with the new card. Do I use that to get the drivers or go to the invidia website? I want this install to go as smoothly as possible so expert help would be appreciated.
I'm not sure how to direct you to the previous post but it's in this section. Take a look for some background.
Thanks
This question was solved.
View Solution.

Hi,
I suggest that your carefully read the instructions published by EVGA. I have multiple EVGA graphics cards and none of the directions ever suggested to uninstall the old video drivers prior to installing the new graphics card. Use the drinver disk that comes with the graphics card after your boot up. The default Windows drivers will work and then you can install the EVGA supplied drivers. EVGA also has a web site that you can obtain later drivers that have been tested by EVGA for your graphics card.
The modern HP motherboards will automatically switch to the discrete graphics card if detected and if it is compatible with the BIOS and motherboard.
The NVIDIA 7xx series graphic cards have been problematic with HP motherboards using a version 7 BIOS. some may work and some may not work.
The reality is that there is no a guarantee that any particular graphics card will work in any particular PC even if the graphics card works in other PCs or even the same or similar model PCs. Know what the return policy is before you buy.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

MSI P45 Neo-F, GeForce GTX 260 graphic card upgrade (Install resolved)

Greetings,
We recently built up starting from an MSI P45-F motherboard and running an Intel Core 2 Duo Processor on XP (we did not choose XP-64 waiting on Windows 7).
We are attempting to upgrade the graphic card to the PCI express with a GeForce GTX 260 and are encountering a driver download error from Nvidia.
Problem/Issue: While driver software is downloading, mid-way the screen goes black/blank and a single underscore cursor appears (remains indefinitely).
We believed it could be a power supply issue as we are running an OCZ tech 600W stealth stream (we are certain there is sufficient amp), but clearly we must disable or uninstall the on-board graphic card (which may be causing a drain?). We are looking under the Device Manager and unable to identify which is the actual on-board graphics in order to disable.
I have attempted to contact MSI directly; however there is a communication problem on my part since I have no idea what I'm doing ($40 bucks to have the card professionally installed is looking like a bargain right now, but think of the fun I will have with the Crysis expansion set on ULTRA).
One side bar question, not important: I'm running 4 GHz RAM, but only 3.205 is appearing? what is the missing RAM being allocated to at idle (is that to the graphics?)?
Any assistance you could offer would be greatly appreciated.
Jay

Greetings,
Well - initially the lock up would occur when we started running the Nvidia driver download software. After booting and performing a system restore (the normal OS load locked up, so we had no choice but to back date). We then downloaded the driver from Nvidia on to a disk from another computer and started up the upgrading computer in safemode and inserted the disk, same error occurred - halfway through the install download the screen goes blank and stays with under score cursor 20+mins.
We called Nvida and they claimed there may be may be driver conflict, so we removed all the drivers (with a driver sweep software-we wiped out allllll of the drivers, no problem) and loaded all drivers fresh and brand new.
Still same error occurred; We attempted to load the nvidia driver from the website -
Carefully confirming that
1.) we have sufficient amps (we calculated 46amps) to cover our build up.
*EDIT: IT WAS ACTUALLY 18amps (ALWAYS DOUBLE CHECK YOUR CALCULATIONS)
2.) we also confirmed the motherboard has the correct slot and we correctly connected the correct (2) power cords.
EDIT: THERE IS NO PRIORITY TO CONNECTION, SO JUST BE AWARE THERE ARE TWO PLUGS AND BOTH FIRMLY INSERTED.
We've called Nvidia and on the 5th time , we were specifically told that it did not appear that the motherboard and graphic driver are compatible.[/flash] How could that be ??? did they give up???
EDIT: THEY WERE INCORRECT, THEY DID NOT DIAGNOSE THE PROBLEM CORRECTLY.
gfffffff* We are just about giving up and preparing to package up the new card and taking the restock charge...
EDIT: NEVER GIVE UP!!!

Radeon 6770M Graphics Card Not Operational on dv7-6199us

Computer: Pavilion dv7-6199us
OS: Windows 7 Home Premium, 64-bit
This laptop came with two on-board graphics cards: Mobile Intel(R) HD Graphics, and Radeon (TM) HD 6770M. I had only ever used the Mobile Intel graphics card, but it frequently refuses to run certain games and runs many others at a terrible framerate. A friend told me that the Radeon 6770M was actually the better of the two and that I should disable the Mobile Intel in preference of Radeon. When I did this, the screen decreased in resolution from 1600 to 1080, which tells me that this "HD" Radeon was never operational in the first place. We cleared the Pavilion of AMD and ATI folders, then spent a whole afternoon and evening downloading and installing drivers for the Radeon, with no result but a wasted day. The drivers on HP Support (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5173... either give an error message saying it fails (for C++ 10 of all things) or that the computer does not meet the minimum requirements. Device Manager gives indications that the driver is not operational or did not install properly. I have never touched the Radeon graphics card in the two years since I bought it. I would like to get Radeon functional. Can somebody please help me?

Hi @Olde
Welcome to the HP Support Forums!
I understand that you are have trouble with your 2nd GPU, the Radeon 6770M. Please look through the following pages related to graphics issues, and how to configure the setup of the graphics adapters depending on your needs.
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Resolving Video and Graphics Issues
OpenGL Applications Cannot Use Discrete GPU with Intel + AMD Switchable Graphics
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Multiple cPCI Graphics cards - System Hangs during Boot

We have 2 Kontron dual output CP332 cPCI graphics cards to install into a NI PXI rack in order to give us 4 graphics outputs.
When one card is installed it acts as the Primary graphics card and it is required to disable to NI on-board graphics card in order for this to boot and function correctley.
If a 2nd Kontron CP322 card is added the system will hang during WinXP boot, as it switches from VGA to SVGA mode.
Disabling the 2nd card via device manager allows the system to boot.
Re-enabling the 2nd card once booted, then configuring with the ATI driver application allows the 4 graphics output to work as expected.
If the system is re-powered it will once again hang during WinXp booting.
Is there anything that can be configured on the NI Embedded PC (BIOS) to prevent this ?
Is there anything in windows that can be set to prevent this ?
Can we control the windows device manager from labview in order to enable/disable the 2nd card after power-on and before shutdown.
many thanks

Hi Scott,
I have some more information for you regarding your issue. We have tested the Kontron CP332 with the PXI-8196.
However when we tested the setup, we had 3 monitors working, the on-board graphics and the dual output from the card.
Until we get the on-board graphics working with a single CP332 I don't think we will get bot CP332's working.
So these are the steps to get on-board graphics working with a single Kontron card the steps come from talking to our PXI Product Support Engineer:
"The first thing you need to make sure is that you are using the
driver for Windows XP, and not the one for Windows 2000. Here's a link
to the driver download page:
http://us.kontron.com/index.php?searchword=cp+332&id=363
Notice that the first two driver downloads look just the same, but if
you hover over them and look at the url, you'll notice that the first
one is for Windows 2000 (w2k), and the second one is for Windows XP
(wxp). So, just make sure you are using the second one. The PSE did
mention that she was initially using the Win 2k driver, and was having
some issues with it hanging and all. Here's the information she sent me
about how she was able to get things working:
"Here is the info. My controller has BIOS version 1.3 but have him try this first before updating the BIOS.
The Kontron Board is the CP 332. I was able to get all three monitors working with the PXI-8196.
Configuration steps:
1) Insert both the controller and the kontron board in the chassis.
Note: When the computer is starting it will give you the Windows boot
up screen on the DVI 1 on the Kontron board and then give you the login
screen on the monitor connected to the 8196 so make sure you still have
a monitor connected to the controller.
2) Cancel the NI installation wizard if it comes up.
3)
Unzip the drivers and run the setup.exe file. Make sure you install
both the ATI display driver and the ATI Control Panel. (Check the zip
name to make sure you have the xp version of the driver)
4) After
restart go to the Display Properties and under the Settings tab you
should have monitors 1 and 2 on Mobility Radeon 9000 (Kontron CP-332)."
If you don't have BIOS version 1.20 or higher, please upgrade to BIOS version 1.30, if you need to upgrade the BIOS please make sure you fully understand the readme file. Then follow the steps above to enable triple output on the graphics cards.
When you have this working please try adding the second Kontron card.
Regards
JamesC
NIUK and Ireland

Installing graphic card

I'm trying to install a new graphic driver and having some issues.
My windows 8.1 system is "p7-1420t" with "Intel (r) hd graphic" which is on board graphic card.
The graphic card that I try to put it on is "geforce gtx 660"
It requires 450w and I changed the power and system runs clean.
When I put the graphic card in the system and turn the power on the system, the moniter is black and not a sigle letter shows up (even the starting BIOS letters) and there is no monitor signal on both cards, which are the onboard intel and the new card.
When I put the new card out, the onboard card works as it which means it's not the issue with windows setting but BIOS setting issue I presume.
I looked to though the Q&A and talked about windows settings and fallowed all of thing I thought its BIOS issue.
Is the graphic card comparable to my system?

Hi,
Check the PIC-E power connector that goes to the NVIDIA GTX 660 and make sure that it is on tight.
If the NVIDIA GTX 660 is new then then RMA the come back to the manufacturer for a replacement.
If you acquired the NVIDIA GTX 660 used then it's possible that it was flashed with a UEFI compatible video BIOS and therefore will not work in your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Cant get graphics card to work on MS6166 board

Iam tring to install nvidia graphics card(PCI) to my MS6166 mother board but cant get new drivers to work,I have disabled on board graphics via jumper on board but new graphics card still wont work.
HELP!
Anybody had same problem?

Well, have you tried leaving the monitor cable connected to the onboard VGA and tried booting up? Sometimes you need to disable it within BIOS.

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

Graphics card/logic board issues: Macbook Pro Freezing during Apple Hardware Test!

I have a macbook pro that was working fine then the screen started acting funny. It would sometimes "tile" up where you would see the same issue repeated over and over on the screen and then computer would freeze. Sometimes the screen would start to have a strobing look and then freeze. I thought the computer was crashing but once the screen froze but the processor was still running. I knew the computer was still processing because I was streaming a video online and the audio from the video continued to download and play event though the screen was frozen.
I went to the apple store and they said they think it sounds like failure of the hardrive, graphics card, display, logic board. A new hard drive was just put in the computer about 4-6 weeks ago, and if it is the other issues could be $500-$800+ to repair. I tried to use the Apple Hardware test (non-extended test) but it keeps freezes at 2 min 32 secs every time when it starts "testing the main logic board"....
Has anyone seen anything like this and have another way to test what the problem could be? Thanks!

I know you're in denial, but it really does sound like the motherboard or graphics board which is integrated with the motherboard. Yes, fixing these things will cost almost as much as a new MacBook Pro. Get a new one, take the HDD out of your old one, and start over again.

HOW CAN I KNOW GRAPHIC CARD ON BOARD FOR MY LAPTOP

hi,i've installed windows 8 pro and i don't know drivers are compatible for thishow can i know?and which graphic card is compatible for my laptop hp pavilion 14-n265tx already built radeon graphici've installed drivers from driver pack solution and now radeon graphic hd 8600m is also installedand i don't see catalyst control centre on right clickplease help me what should i do?

Hi, The following link shows the specs of your machine: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04197607 It has (a) Intel HD Graphics 4400 (also called on board graphics),(b) AMD Radeon HD 8670M Graphics (2 GB DDR3 dedicated). Regards.

Does the hdmi port on the HP ENVY dv6 connect to the graphics card or on board video?

Does the hdmi port on the HP ENVY dv6 connect to the graphics card or on board video?
Thanks!
This question was solved.
View Solution.

Hi:
It is part of the graphics adapters hdmi audio.
Normally the Intel HD graphics adapter controls the HDMI audio--even on the Intel processor models with AMD switchable graphics.

K7n2g on board graphic card

Similar Messages

Maybe you are looking for