K7N2G - question about controlling the surround sound.
Hi!
I bought a K7N2G a few weeks ago and yesterday i bought a Creative Inspire 6700 6.1 Surround-system. The only problem is that i don't get surround sound.
I installed the nForce APU where i could choose 5.1-sound but it didn't help, then i took a closer look in the manual only to discover that i'm using the wrong tool, the control panel-application in the manual looks a lot different.
I have been reinstalling drivers for hours, trying to get to that applications but i can't find it anywhere.
Could someone please tell me, if possible, where to find that application. It seems like i have to do some settings to get my surround sound. I know that the card supports 5.1-sound and i managed to get sound in all channels except the rear center - i played a multichannel MP3 that said "left - center - right" and so on.
since i don't know the name of the applications the only clue i can give is what the Applications border says:
"NVIDIA nForce (TM) Control Panel".
Quote
Originally posted by backwoodz
"NVIDIA nForce (TM) Control Panel".
that app is for the nforce one boards and the nforce2 boards that use the mcp2-t that have the apu soundstorm chips.....
If you installed an addon sound card you need to disable the onboard AC97 codec. And install the drivers and software that came with your card.......Or just download the Advanced AC97 codec and software from Realtek for the onboard sound card and use that instead.....
I think you misunderstood, i'm using the onboard sound on my K7N2G - wich is a nForce2-board. And i do get sound, i am just unable to control it and since no game or application will provide me with surround sound even if i enable it within the application - the K7N2G have built in 6-channel sound. I'm using analog output so i have checked "Rear speakers connected to line in" and so on.
Similar Messages
-
Some question about communicating the usb RAW device
I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data Info Time Cmd.Phase.Ofs
15 CTL 80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc 56.1.0
14 CTL 80 06 03 00 - 00 00 04 00 GET DESCRIPTR 11us 57.1.0
14 USTS 00 00 01 c0 canceled 2.0sc 57.2.0
15 USTS 00 00 01 c0 canceled 5us 56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time Cmd.Phase.Ofs ---
----- ------------------ 15
CTL 80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0 14
CTL 80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 11us
57.1.0 14
USTS 00 00 01
c0
canceled
2.0sc
57.2.0 15
USTS 00 00 01
c0
canceled
5us 56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Questions about using the Voice Memos app
I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
-Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
-When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
-In your opinion, how is the recording quality of the voice memos app?You cannot import your Android voice memos to your iPhone's voice memo app. You might be able to play the Android memos and have the iPhone pick up the audio and record it.
Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
App quality is excellent. -
i want to play my ipad on through my tv and receiver to get surround sound (not using the tv speakers) I connect the htmi cable to my tv and ipad do i need more cable to get my surround sound to play the audio? i thought hdmi did it all.
if you have a 6th or 7th gen classic, you'll have a have the video out cable from apple. only the 5th gen will play with a generic 3 connector video out cable.
-
Where's the surround sound test program gone?
With HD surround sound problems still ongoing for me, i need to run the test program again to try something, but I just can't find it anymore.
I've looked in all the obvious places - has it been erased?Hi Spec_d,
To change the audio settings on the vision box please try the following:
Press BT Vision on the remote
Scroll right to Settings
Press Select
Select general settings
Highlight and select 'Digital audio output' from the options
Current Audio output is shown by the tick displayed next to the appropriate option
To change the audio output type, navigate to 'Stereo'. A tick will move to the desired audio output method selected. To confirm the changes made, highlight 'Save' and press select.
Let me know if this has helped you at all.
Cheers
Paddy,
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
How to turn the surround-sound-like effect off with headphones?
When I plug in the headphones into my ipad I notice the sound in the headphones becomes kinda surround-like. For instance I clearly hear keyboard clicks "at a distance" in front of me when using headphones. This "effect" is nice for keyboard clicks but totally ruins any music listening experience because any song gets distorted and is perceived at some distance when played. This becomes extremely annoying when listening to mono content. The special sound processing applied to get this surrround-like sound effect adds artefacts into the sound, please let me know how to turn this off Apple, I couldn't find any option in the settings.
Overall, I couldn't even imagine I'd get such an annoying and unprofessional effect applied by default without a possibility to turn it off. If I knew that in advance I'd never buy my ipad since currently it's not possible to listen to music with it
Message was edited by: vvtrusvvtrus, did you ever consider that turning off the clicks or other sounds might have an effect? So, before telling people who want to help you that an answer makes no sense to you, you might first try it.
Since hearing and listening to music is a very subjective matter which also depends on the quality of the headphones you use, it might be the case that you hear on your iPod something that you couldn't hear on your laptop and portable music player (both of non-apple design). Then you should blame those other devices to deliver you such poor sound. On the other hand, you might have a better hearing than other people which might give you the impression of surround-sound-like effects -- in which case we can't help you either.
Anyway, there are no settings to turn on or off "surround sound effects". -
Question about rendering the page
hi
i have button on page 73 which this button brings me to page 74
in page 74 i have a sqlquery report region,
and another simple html region which have a button
called "send_mail" there is a process which executed when i press this
button and of course i did branch to this button which brings me to the same page 74
my question is do the sqlquery report region run again when the page in
rendering? or the apex save it as cache? and if not is there a way that it won't run again but stay in cache like"save state" ? cause i saw only conditional display and not conditional process of sqlquery report?
the reason that i ask this cause the query is very heavy
thanks in advancedHello Naama,
>> i wanted to ask if there any more things that i can missed because of this "old" version
APEX is using the PL/SQL Web Toolkit extensively. I don’t really know the differences between every version, and I don’t think it’s matter. In some cases, a new version can fix some bugs (like in the rendering process), in others, can add new features (like caching) and in general, making the code better (optimizing etc.). So, I can’t really give you a list of things you are missing, but I can assure you that not using the latest version can damage/degrade the quality of your system.
There is another problem with not meeting the pre-required installation terms, because usually people will assume you are. It can make debugging really hard. In your case, you were lucky that Scott asked you right away about the OWA version. Unfortunately, Scott is unique that way. Other (like you and me) can spent a lot of time trying to figure out why something is not working as expected, without knowing (remembering) that the only reason is a faulty infrastructure.
Is there a problem to install the latest version of the PL/SQL Web Toolkit? As far as APEX concern, it will not harm your 1.6 instance, and should not damage any other database functionality, so why not upgrade?
Regards,
Arie. -
Question about how the Robocopy /B switch works...
I've been experimenting with robocopy recently, and most switches seem self explanatory for the most part; although I have a question about the /B switch.
The help says the following:
/B :: copy files in Backup mode.
I've checked multiple forums and websites to try and elaborate on this a little more, and from my understanding this switch enables backup mode that essentially gives the ability to change the acls of a file/folder when the account running robocopy does
not have sufficient privileges, to perform a successful copy.
My question is, when the acls are changed when using this "backup mode" switch, with the /copyall switch, will the file still retain the same user access that it originally had - or does it change all of the security settings?
I'm hoping it will somehow change the security settings, create a copy, and retain the same acls as the original - so users can still access necessary files.
Can someone please explain how this "backup mode" works?
Thanks in advance.This is a very useful thread with a lot of hostility in it.
I have to agree with Jonathan and hazymat: there are few other forums that will discuss the exact function of /b switch, the TechNet article just says "copies in Backup Mode" (I have the article bookmarked), and when doing a google search, THIS page comes
up as the top result! Kinda difficult to tell people they should go search, when you are the exact destination of that search, isn't it? ;)
No offense to anybody working hard to help out here, but this is why sites like Stack Exchange will overshadow every traditional tech forum very soon. More concise question/answer format, more civil, and they actually encourage old questions developing new
answers! All q&a is cataloged for future reference. Their focus is on being a 'resource'.
The negativity here is unfortunate, you guys have great potential to be a very helpful resource for people. Who are you trying to be, the guys with all the answers, or the guys who say "get out of here, your answer isn't in here. Go search for it."?
Regardless, many thanks to jrv! for helping me with my robocopy batch SCRIPT which I just used to create an automated backup! Take care boys. And yes, I just bumped your old-old thread.
Unfortunately I think you miss the point. RoboCopy is an application. It is not a script. This is a scripting forum. Many people come here nd never read the forum guidelines and do not ask script related questions.
The /b switch is documented in RoboCopy help. Of course it assumes the reader is a trained Windows tech and knows what backup mode is. It is used by nearly all backup software when backing up a live system..
¯\_(ツ)_/¯ -
Need to ask a question about getting the iPhone 5 without an upgrade available.
Alright so I have currently an iPhone 4S and do NOT have an upgrade available. My question is how do i go about buying the 5 then? From what I know, Apple sells "unlocked" phones at around $750 (I want the 32gig version) but wont come out on launch day. Is there a Verizon specific phone that I can get instead of an "unlocked" phone that would cost cheaper and I can get it on launch day? Or do I have to preorder it through verizon's website?
Another thing is...is there certain fee's that I would have to pay to go along with the phone if I can buy it?Pernoe: I'm no expert, but this is the way I understand unlocked phones. Unlocked phones that use GSM technology can work on either T-Mobile or AT&T networks. Unlocked phones that use CDMA technology can work on either Sprint or Verizon networks. I can't tell you the difference between GSM and CDMA... I just don't really know what it is, just that AT&T and T-Mobile use GSM and Sprint and Verizon use CDMA.
That being said, I purchased (or at least ordered... my credit card has not been charged yet) 2 iPhone 5's from Verizon and opted to pay full price instead of taking the contract discount. You don't need to buy an unlocked phone to pay full price. You just have to select "month-to-month" pricing instead of "2 year contract" pricing when you buy the phone. -
Questions about flashing the bios
Hi everyone. I have a few questions about the process involved in a bios update.
First, I should tell you I have a Lenovo G470 that sometimes has problems booting.
The problem is I turn on the laptop and after 2-3 seconds it shuts down. I see the logo, and nothing else. After that I can spend hours trying to turn it on again, and keeps failing. After some time, I turn it on and use it without problems.
Before these problems, I had experienced similar troubles, but I could fix it (in my way) and I explained it in this post: http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/Lenovo-g470-shutdown-problems-in-intervals-of-...
Ok, In that post a reply says that a possible solution could be a Bios update. So, I've been thinking to flash the bios to solve my actual problem, but I would like to ask you some questions:
1. Updating the bios could be a solution for this case?
2. How long does it take to update a lenovo G470 bios? (I ask this because I read that if a problem occurs in the middle the damage can be serious, and in the past I had these random shutdowns, so I'm a bit afraid)
3. How am I sure if my bios is or not updated? (there's a way to check this from windows?)
4. Finally, if you could give me a link to download the correct bios update I'll thank you.
I think that's all. I apologize for my basic english and hope you could give me some clues on this, because, as you see, I'm a total newbie.
Thanks!hi alemaneitor,
Regarding your questions:
1. Yes, flashing the BIOS may help solve your problem as it will re-write the configurations on the CMOS. Take note though of the changelogs or README (repair changes) as the latest BIOS updates fixes critical issues on the hardware.
I've also seen some units that act the same as yours and doing a gpu reflow most of the time fixes the issue - see this thread in reference.
2. In flashing the BIOS outside of Windows, it takes less than a minute. If you need to run the BIOS flash utility inside Windows, it may take 1-2mins.
3. If there's a new BIOS that fixes critical issues, it's most of the time uploaded on the lenovo website (in some cases, BIOS updates are not available to the public and can only be used by service technicians)
4. The latest BIOS update for the Lenovo G470 is the one below that fixes an issue on units that can not enter BIOS after restart under compatible HDD mode (see README.TXT)
BIOS Update for 32bit Windows
40cn33ww_32.exe
3.28MB
BIOS Update for 64bit Windows
40cn33ww_64.exe
3.67MB
Regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Question about using the Combo Box feature!
I have a form that I am trying to create for our company that will allow our field nurses to select what they need and print it more effieciently. The problem is that some of the selections are too long and I can't get the Combo box feature to allow them to be printed on multiple lines:
I have spoken to my supervisor about redoing the form to look like this:
But in order for us to meet state guidelines it has to be formated like the first because that is the state form given to us. I want to be able to either:
A) have the combo box multi-line auto text sized so it will get all the information into each box
OR
B) create text boxes at the end of the form that auto enteries the selected data from the second picture into boxes that look like the first picture.
Is there any way to do either of these?A) No.
B) Yes. Create a text box with the following code as the custom calculation
script (assuming the name of the combo is "Combo Box1"):
event.value = this.getField("Combo Box1").value;
That way, when the user makes a selection in the combo-box, the value will
also appear in the text box. Just make sure to make the text box read-only
and set the combo-box to apply the selection immediately. -
A question about control panel.
Click the up arrow on the control panel,then,pop up the subpanel.I want to create a password dialog before pop up the subpanel,only you put the right password,the subpanel was popped up.
what shuold I do?thank you.Hello, I'm interested by your question JSL because I meet quite the same problem with my HP HDX 16 1050 EF with Vista Home Premium SP2 64-bit.
With the first audio drivers that came with the computer, I couldn't disable SRS settings because Windows sounds were totally distorded...
And when I left default parameters, many musics were saturate because of the SRS...
I've updated IDT Audio to v1.0.6225.0 (july 2009) via Windows Update. There are no more SRS but Dolby Natural Bass. Now I can disable it without any sound problem but each time I plug headphones or restart computer the dolby natural bass option light on...
How can I disable it definitely ?
Please help us ! -
I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil -
Question about controlling both handles or one at a time
I am using a trial version of Illustrator CS5 on Windows 7. I know how to select an anchor or its handle(s). But I do not know why I sometimes am controlling both of an anchors handles when I move one of them, or when I am moving only one at a time.
My question is: how to make it so I move both handles at the same time or how to make it so I am only moving one at a time?yes you can use the direct select tool plus alt (option keys) or the convert anchor point tool to adjust only one handle at a time and you use the direct select tool without the alt (option key) to adjust both at the same time but be aware that once you adjust one of the anchor points independent of the other then you have made a corner (angle) anchor point and just using the direct select tool will not bring back the control over the two anchor points.
That means you have t use the convert anchor point to convert it back to a smooth anchor point, which will require you to adjust the path in a radial way that is both segments on both sides of that anchor point will move out of the position and follow a different form than it had before converting to a smooth anchor point.
The way around this is to go to the control Panel and use the button to convert to smooth anchor point which will give you a more desired result nd you can use the convert to corner anchor point button as well as yet another way of converting
So you should experiment so you understand the use of the direct select tool the pen tool the convert anchor point tool and the keyboard controls and the control panel. -
Some question about control file
Hello,
ALTER DATABASE BACKUP CONTROLFILE TO TRACE
- in my case I have three control files. The above command will generate the SQL
command for regeneration of all three control files?
- is there any way to find in which trace file the SQL script will be written. In my user (udump) and database (bddump) dump directory are many trace files and it is hard to find it. Also it is safe to delete all this trace files?
- RMAN is kepping all it's data ( required for recovery) in control file.
By using the above command I didn't find nothing about those data ( in the trace file ) or maybe I skip it.
Windows 2000, Oracle 9i
Thank you!Hi,
To get the file, use this select in the session where you executed the backup to trace:SELECT
'The file you search is: ' ||
DIR.VALUE || DECODE(SUBSTR(DIR.VALUE,1,1),'/','/','\') || '*' || SPID.VALUE || '*' "Info"
FROM
(SELECT VALUE
FROM V$PARAMETER
WHERE NAME='user_dump_dest'
) DIR,
(SELECT SPID VALUE
FROM V$PROCESS
WHERE ADDR=(SELECT PADDR
FROM V$SESSION
WHERE SID=(SELECT DISTINCT SID
FROM V$MYSTAT)
) SPID;You can cat/type this file directly. The file name returned uses wildcards (*) purposely.
I read something about RECOVERY CATALOG and found that it can be created on same database or in a different database:Yes.
If it's created in same database and this is lost, RECOVERY CATALOG will not be lost too ?Yes, it will. That's why we create the RECOVERY CATALOG in a dedicated database (for example the one in which EM Grid Control / OMS has it's repository.
- If it's created in a different database, do I need a RECOVERY CATALOG for this database too? Well, you can do like that. I don't do it though. My RMAN's RECOVERY CATALOG database is backed up online via standard archivelog method (with my dynamic backup script), not using RMAN.
Regards,
Yoann.
Maybe you are looking for
-
I want image instead of black screen when video ends.
Hi guys, I am wondering how you place an image at the end of a VC video. I tried placing several images at the end of a recording but it always ends with a black screen when it is produced. Here is the video I am working on and I want the last text y
-
OT: Calling on Vista & Tablet users for help
Hi there. Vistia Ultimate (SP1 plus updates), Wacom Graphite 2 Tablet (latest software) and PS CS3. Thank you so long for your help. I have formatted my HDD, installed and activated all my software and still having huge problems. I also have Office 2
-
OBPM - Problem exporting to CSV (for use in Excel) with special characters?
Hi All, I am wondering if anyone has found a good solution to a problem I am experiencing with OBPM's OTB export function. Our application is required to be bilingual for English and French, however we've noticed that when the user is in French-displ
-
Can anybody tell me how to transport a standard text to different systems. And if it is possible tell me how to add standard text in a CTS. Thanks, Daniel Son.
-
How to run report from form 10g
Dear All, I have code of forms 6i that i used to run report. but when i run this code through forms 10g this gives message that use RUN_REPORT_OBJECT instead. please convert my code to 10g . ============================================== pl_id:=Get_P