K7N2GM-L 6777 BIOS doesnt correctly detect CPU temp and FAN speed

Hello,
I use a K7N2GM-L 6777 mobo with a amd 1800+ and a arctic copper silent 2tc.
the mobo isnt able to detect the right cpu temperature and cpu fan speed in bios.
did anyone experienced that problem??
i already updated to the latest bios V1.6 but no change !!
the cpu temp is shown about 6°C/42°F and the fan speed is 0 rpm !!!
but the system temp is shown correctly (21°C/69°F (when i just started the system))
any idea
greetz,
fba

Hello!
It has been heard of before, yes, but your board is rather new so I don't think it has had an issue yet.
There is normally a sensor on the processor. If it does on your processor I can't say. If there isn't a sensor on the processor, or if it is covered with thermal grease, or otherwise damaged, BIOS and all programs that read BIOS data will be wrong.
Bit off: I'm speculating in that HSF, and I wonder how good and quiet it is. Been recommended by a store nearby.

Similar Messages

Is there a free app that allows me to show cpu temp and fan speed in menu bar?

i want a free app that monitors cpu temp and fan speed and can display them in the menu bar of my MBA

http://www.apple.com/downloads/dashboard/status/istatpro.html

Weired voltage cpu temp and fan speed readings

Built this system last week when i install core center I get no 3.3 v readings. cpu temp plays between 18c to 60c and the fan speed from 800 t0 6000rpm. Check in the bios all voltage readings are fine but cpu temp and fan readins can be way off. Also installed lastest versions of mbm and get the same results. Flashed bios to latest version also. Cool and quiet is not activated. Weired thing everything runs fine. motherboard k8t neo2 cpu amd 64 3500 memory corsair 3200LL 1024 video card BFG 6800gt sound Audigy 2 hard drive WD 120 sata liteon dvd rom and cd-r power supply Antec 480watt neo power Everything is at stock speeds with all latest drivers and xp sp2. Don't know what can be the problem. Please help not the first systeme I have built but first time I encounter this problem. Tried 3 different psu for testing and get the same result.

Well sorry to say I solved the problem for good. Contacted MSI support. Only answer I got was Maybe the board was bad. Got it exchanged from the store and got an Asus av8 deluxe rev.2 instead. Everything runs fine. It was my first MSI board and sad to say it gave me a lot of headaches and configeration problems. The new setup ran great on the first try. Don't think I will buy MSI again in the near future.

USB/FireWire usage increases CPU temp and fan speed

Hi,
I'm curious, does the usage of USB and FireWire ports increase CPU temperature and fan speed...?
I have an M-Audio Fast Track USB interface plugged in and whenever I play any songs from iTunes using that interface as an output, my CPU temp increased and fan speed jumped from 2000 to 3300 rpm. And on separate occasion, an 8GB of file transfer from an external FireWire-based HDD had both fans speed up to 4,400 rpm.
Is this normal...? All these were done with an external display plugged onto the MBP with "clamshell" mode.

USB operations involves quite a bit of CPU action, Elphidieus.
Firewire places less demand on the CPU but, in a situation like the one you describe can involve both increases in power usage and in HD temperatures.
The fan speeds on Macs are not simply responsive to CPU usage. Both HD temps and power usage can also play a part in the equation that ultimately produces the fan speed. As HDs have much lower heat tolerance than CPUs you will find that it is quite common to see the fans ramp up when doing a large file transfer over FW (or USB, for that matter) , especially if the internal HD temp gets to over about 50-55º Celsius.
Cheers
Rod

CPU Temp and Fan Speed

Hi
According to SMC Fan Control and iStat my CPU is running at 74C currently and often 90C under light load with associated fan speed of 6200 rpm. I have checked activity monitor and very little load on CPU jsut safari and Activity Monitor have any significant usage ( 10% ish). Is this a 'normal' CPU temp and if not are there any ways to check cooling or in crease cooling, ultimately to keep the fan low and noise down,battery life up??
many thanks

thanks for the response.
'All processes' is selected - showing 50-70% CPU idle. MacBook has good ventilation, sitting on a hard table. I upgraded the HD a while ago, to a 7200 rpm 320GB unit, would this make a difference?

Satellite C855 - Average CPU temperature and fan speed

Hello!
I've had this toshiba Satellite C855 since march this year. it's only recently that the CPU temp and Fan speeds have been worrying me.
When I'm not playing games or doing a livestream my CPU temp stays around 35-40% with the fanspeed at steady 50% or not on at all due to it been cool.
When I do play games however the fanspeed is going up to around 66-68% with the CPU been around 55-60%
I was wondering if this is normal? or do I need to clean it out by taking it apart. if it is the second option then I am worried since I do not want to damage anything inside. plus I am not that great with the inner workings of a computer.
Any help or information would be very appreciated thanks.

In my opinion there is no reason for panic. T is logic that under stress CPU activity is higher and CPU produces more heat. Notebook must be cooled down properly so sensors that control cooling fans register growing temperature and cooling fans will run on higher speed.
There is no reason for cleaning. And one day if that must be done please dont do it alone. You are not authorized for doing this.

First Backup on Time Machine - CPU temperature and fan speed

I attached my external WD drive and started Time Machine. Works just fine however I watched the cpu and temp and fan speed as reported by iStat.
During the hour long "first backup" I reached an incredible 160 degrees cpu temp and 6000 rpm fan speed. Cpu was 70 percent or so. When this temp was reached it looked like some limiter took over to reduce cpu consumption and temp. CPU dropped to 30 percent and the temp came down. Fan rpms reduced as temp did.
I don't know if iStat reports the feeds on a MacBook Air properly or not but if so......interesting.

160F is not very high - 160C would be a different matter.
Under sustained 100% load, my Macbook CPU is at about 190F, with the fan at about 6200 rpm, in a room at about 68F.

I have about 97% directoryservice cpu usage, 55% cpu usage, high temps and fan speeds with very minimal activity on my macbook, how can I resolve this?

Recently my computer has only been showing 42% idle when im doing absolutely nothing on the computer, i'll only be browsing the internet. Even when I shut down programs such as drop box, skype, itunes, etc. When I check activity monitor the only process that is using over 5% is directoryservice, and it is usually sitting between 90-99% usage. I downloaded istat which is showing my cpu temp at 77 degrees and fan at 4000 rpm. If I watch a youtube video it will kick into 6000 rpm. Please tell me how I can resolve this issue!! When I restart the macbook it seems to work for about 10-20 minutes where I can browse with ~90% idle and ~2000 rpm.

I discovered this issue independent of this thread, and can confirm that killing KiesWifiAgent will instantly take care of DirectoryService's high CPU load. You'll also free up a bunch of memory. On my MBP (8 GB RAM), Kies had leaked its way to consuming 1.5 GB of memory.

Latest upgrade - have you noticed a BIG change in CPU temp and fan activity

I have just installed the latest update which included the Mac OS X Update 10.5.7.
Prior to this, the CPU temperature was averaging 100, fan speed approx 2-3k, no matter what I did. Checking the ACtivity Monitor showed no runaway programmes.
Now CPU temp is 56, fan speed 1k.
The battery pack no longer is hot enough to fry an egg.
Has anyone experienced such changes?
I wonder if this relates to the very poor battery life/usage associated with these MBP originals?
royuk

thanks for the response.
'All processes' is selected - showing 50-70% CPU idle. MacBook has good ventilation, sitting on a hard table. I upgraded the HD a while ago, to a 7200 rpm 320GB unit, would this make a difference?

CPU Temp and CPU Fan Speed

I am having a strange problem . One time I will boot the PC and CPU temp is 43 and CPU fan speed is 1308 rpm in Core Center. I do a restart system and the CPU temp is 32 to 36 and CPU fan speed 3308. Not sure if I should trust Core Center . Bios shows CPU temp 48 and fan speed of 3328. I have been reading here that there are a bunch of threads containing some kind of problem with CPU temp or fan speed. My Bios is 1.4. If anbody can give me some ideas that would be great.

Open CoreCenter on deshtop. Click where it says CoreCenter. Click Cool&Quite button. Then Click apply. This drops the fan speed back into the 1400 range and the temp will rise back to the 40s.

Question regarding CPU temps and latest bios (1.8)

Hi, just build my first system using an MSI board. The K8N Neo2 Platinum with an A64 3500+ Venice. It came with bios version 1.5 and everything went smooth. Been running stable for a few days now. Cpu temps were anywhere from 38 (idle) to 50-54 under load. Though most of the time they were in the mid 40's. Which are acceptable temps.
Anyway, I just installed the latest bios tonight (1.8) and the reported temps have drooped significantly. Around 27c (idle), which is actually lower than the reported system temp (28c). One of the listed fixes for Bios 1.8 are cpu temps, but can these be correct? They seem very low. Which temps should I believe?
Thanks

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

GPU/CPU Temps and Graphics Performance Questions

I am also experiencing some similar oddities with my 15in UMBP. As background on my setup I am running 10.5.7 (the problem began before the update) and I work in an air-conditioned office with a cooling pad for my frequently "toasty" MBP. I have noticed that my temps are significantly higher while running on the NVIDIA 9600M GT vs. the 9400M, and also I use iStat to monitor my system.
Here's the problems. With only Mail, iChat, Safari 4, and iTunes running (87-93% idle) I frequently see temps hit 150-155 F for the GPU 145-150 F for the CPU. While running on the 9400 with the same applications (87-92% idle) I see temps from 90-95 F for both GPU and CPU. When I had first gotten my MBP I used it mostly with Aperture 2 and I thought it was strange that I couldn't tell the difference in performance between the 9600 and the 9400. Later I tried to use it from time to time in Win XP (bootcamp) for gaming, but it would get so hot that i could hardly touch the keyboard and the graphics performance wasn't nearly what i thought it should be. In fact I was only able to run games slightly better than on my company provided Dell Inspiron D620 (old POS). On the Mac side I tried to test out the performance of my GPU by setting the graphics in X-plane just to the point that with the 9600M GT enabled the program wouldn't tell me that I had too many graphics options turned on. After getting that dialed in I switched over to try it with the 9400 and the performance was nearly identical, and maybe even a little better... I'm not a genius when it comes to computers by any means. I don't know very much about what kind of performance I should be seeing from these two cards, but I would think that the 9600 would greatly out perform the 9400.
Any feedback or advice would be greatly appreciated

I used istat pro to get the temperatures and fan speeds. You can download it free here:
http://www.apple.com/downloads/dashboard/status/istatpro.html
I turned it on a few hours ago and the temperature of one of the cores reached 70 degrees C and the fan speeds all went up to around 3000 rpm. I'm just going to leave it off for now and take it in to get serviced. Only problem is I have to make an appointment and who knows how long it will take to get it in. Hope it works out for you.
Kyle

Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?

My desktop computer m9200T running Win7 Home Premium crashes often. It seems to be temperature related.
I had tried SpeedFan, but my computer crashed everytime I ran it. SpeedFan window scrolled 20 some lines of text than the computer crashed. Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?
This question was solved.
View Solution.

Hi,
Only have one temperature monitoring application running or you could end up with erroneous readings.
Try PC Wizzard. Depending on your hardware, you should see temperatures for CPU, GPU and disk. At the same site you can also try HW Monitor.
I am running a custom motherboard and it comes with its own software for this purpose. HW Monitor seems fairly complete.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

CPU Temp and Bios?

I have my Athlon 2100+ installed with a volcano 6 into my KT3-Ultra ARU board. Is 40-41C a good temp (from bios)? FSB is at 133, case temp was 29C and room temp was 68F.
Does MSI put the new bios on the board during production? It appears my board came with bios version 5.4 already installed and I just want to make sure it's not a glictch.
~Matt

Hi I think as MSI manufactures thier boards ,they update to the latest bios as they put out new ones,because when I bought my TURBO2, it came with the then latest bios 3.2. So if you see 5.4 ,thats what you got. Regards, BIGDADDY51 CT USA

K7N2GM-L 6777 BIOS doesnt correctly detect CPU temp and FAN speed

Similar Messages

Maybe you are looking for