K7N2L CPU detection is wrong!!!

lo all.
I changed my fsb to 200mhz and my agp apeture size to 128MB. The pc would not boot up after doing that so I set the jumpers to force 100mhz FSB. I went back in the bios, changed the settings back to 166mhz FSB and AGP 64MB. After restarting my mobo detects the cpu as a 1100mhz instead of a 2500+. No matter what I change or reload, the thing still detects wrong.
I haven't updated the bios to a new version yet, will give it a go and hope it works. If that doesn't work, do you all know of any way to fix this?
thx
CD.

lol, suppose it would help if I said it :D . I did put the jumpers back though. I'll check my mobo's manual again, maybe I put them in wrong (sure I haven't though).
I mentioned this problem to someone who's got a similar board and the same thing happend to him. He said he swapped his cpu with a 1800+, booted the pc, then put his 2200+ back in and it detected fine. Now I don't wanna go through that mission cuz 1stly I need another cpu to try it with and 2ndly I ABSOLUTELY HATE removing heatsinks from mobos.
If there's a way (easy one :] ) to fix this, then thats the way I wanna go.

Similar Messages

Odd cPU detection and a bios issue

hey guys got somemore info about my super odd cpu
updated mobo biod to latest 5.5
cpu detected as athlon xp 3000 as it "should" do
cpu-z detected as athlon xp 300 = multi 13 x 166
now all of a sudden its not detecting it properly
i'm back to using the multi-locked at 14, can't lower multiplier, and FSB changes arent too stable, havent done thorough stress tests yet.
clock atm = 2337MHz o.O
and a wierd prob i've been gettin recently, bios has been resetting itself at random intervals....my computer will just restart itself and reset the cmos to defaults and ask me to correct them
wondering if any of u guys n gals could help
cheers in advance
-mike-

i have already cleared cmos multiple times when overclocks have failed.....might try reflashing the bios n seeing what happens
just think its odd that this cpu won't run any lower multipliers and crashes on anything other that "auto" setting
u think the wire trick would me here, i wanna lower multi and raise fsb to 200
but this chip aint lettin me do anything :/
cheers for ur reply dude :D
mike

Error" Unsupported CPU Detected

Hello, I have a HP Pavilion P6142P desktop with the M2N78-LA (Violet) mobo. I recently installed a new AMD Phenom X4 9850 CPU; which accordingly to the HP website is compatible with this unit. Once installed I get the message: "Error: Unsupported CPU detected, System will shut down in a few seconds". Now I can get past this by hitting "F2" several times and Windows 7 (64-bit, Ult) will load. In both BIOS (v5.22) and device manager the CPU shows up accurately. Any thoughts on a cause and possible fix?

Previously, the specs for the Violet motherboard have stated a TDP of 95 watts. It appears that the AMD Phenom X4 9850 CPU came in two version, both of which are listed at 125 watts TDP. As far as I know, the Violet motherboard is only rated for 95 watts TDP and the only fix is to install a 95 watt TDP CPU.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

When i load creative cloud my computer detect the wrong email ...i can't go to the next page to load my app

when i load creative cloud my computer detect the wrong email ...i can't go to the next page to load my app

it does not help at all...
this is what i get when i instal i can't go therder...
i need to put my corect email this one is no longeur avaliable
i realy need to instal please....[image: Images intégrées 1]
2014-06-28 20:27 GMT+02:00 John T Smith <[email protected]>:
when i load creative cloud my computer detect the wrong email ...i
can't go to the next page to load my app created by John T Smith
<https://forums.adobe.com/people/JohnTSmith> in Adobe Creative Cloud
- View the full discussion
<https://forums.adobe.com/message/6505915#6505915>

K9n2 bios reading my cpu temps all wrong

K9n2 bios reading my cpu temps all wrong well actuly it not reading them at all my cpu AMD x2 5200 is said to be ideling at 26c but when i run a stress testor it stay at 26c so no change what so ever between load anf idle temps.
my cou core temps are wrong any way and all wasy have been core 0 idle at -2c and core 1 -22c but they have goe up to core 1 26c and core 2 8c load so its obviously geting hotter but the motherboard isant repoting that it is :/ i have used manny difforent programs and all came back with 26-27c for the cpu no mater what i do i have bios 3.3.
this never haped on my old ABIT kn9 sli it allways stated the corect cpu heat
ohh and also speed fan carnt recogise the cpu it just says temp 1,2,3 for the motherboard where as befor it was cpu,core,chip and so on (that was with old board)
any sugestions
sorry for spelling im dyslexic

well my cpu is back in my old motherboard with no problems at all no hard crashes and with the same ram timings the proper ram volts 2.1(msi board couldent handle 2.1v for ram) and the board only reports 26c no other temp used all temp programs and non of them changed when fully stresed only core temp showed any temp change but cart go buy that because my cores are so far off now on my old bard the temps go up and down like they should.
i did clear the CMOS whith all unpluged
all were at stock but ram voltage went to 1.8v so upped it to 2.1v (manual recomended) (wouldent start)
at stock if i restarted pc for somthing like an update it wouldent post unless it was un pluged at pluged back in (at stock)
and i have had no such problems with my old ASROCK board or my board im on now a ABIT kn9 570a sli
ohh and the board came warped but the rear ports
any way decided to go over to intel so got a EVGA board now and using a old p4 extream
sorry to sound pissed of but 2 boards that were useless (each was from difforent Etailor)
and windows was a fresh instal

Wrong CPU detection

My AthlonXP 2100+ is now detected as 1500+, what can I do to change it back???? someone please help....... ?(

Thanks AGAIN :P , anyway, I pushed the FSB to 134mhz, 1mhz just to 'try', I didnt do the voltage thingi, man, it was terrible , the comp wont start the bios and this that, I got it running again anyhow....I have 2REALLY noisy Volcano9 on my CPU and as an extraction fan its running 52C on idle, hot tropical wheather here......I have however easily overclocked my Radeon to quite high VPU and Video-RAM speeds, it is GREAT! :D
Hey,I am running a KT3 Ultra with some PC 2100 ram, I am planning to upgrade my mo/bo to the K7N2 Delta , will I see improvements (10-30%) using these kinda ram? 'they' benchkmark with the PC 2700 ram,right? The K7N2 with the IGP is currently available, my comp guy said that the IGP will 'eat' some of the system resources even if I disable it, will it?

OEM Maximun CPU line is wrong

Hi all!
I have a very curious problem, the MAXIMUN_CPU line in Oracle Enterprise Manager is wrong.
In Performace tab, the MAXIMUN_CPU red line is "locked" in 1, but the database is set CPU_COUNT=8 and MAXIMUN_THREAD_PER_CPU=2.
We have performance problems and this issue is quite significative.
Thanks all!

Hi,
You mean somthing shown in this Graph: Monitoring Real-Time Database Performance
Here cpu usage is 100%.

CPU detection

I have an AMD Athlon XP 1800+ processor. However, my MSI KT4 Ultra-FISR motherboard detects my processor as running at 1150MHz, and as having a max clock speed of 1150 MHz also. My previous motherboard that I used with this processor, the Abit KG7, detected this processor just fine, and it ran at 1530 MHz. What should I do?

ok, you need to get into the BIOS.
Restart the PC and press the "del" key at boot up.
This will open the BIOS screen. You will see a list of menus, got to Frequency/Voltage control
In there you will see CPU FSB Clock - it should say 100 MHz, this is what you need to change to 133 MHz. You will need to type it in.
Once it is set to 133 MHz press "Esc" untill you get back to the first screen. Then select the save settings and exit. Your machine will boot and you should see the CPU being recognised correctly.
As 133 (FSB) x 11.5 (the multiplier of your CPU) = 1529.5 Mhz which is the "Speed" of an XP1800+.

CPU detection problem ?

I have a 2200+ XP AMD CPU and a KTA4AV mobo.
Problem is that windows xp says its a AMD 1500 running at 1.35Mhz ??
Bios is on Auto setting.
Any idea how I can sort this out ?
Thx

Thanks alot, that worked

Xorg Automatically Detects The Wrong 'Primary' Monitor

Running KDE on an HP dv9910us with the nVidia binary drivers.
lspci for the video card is:
00:12.0 VGA compatible controller: NVIDIA Corporation C67 [GeForce 7150M / nForce 630M] (rev a2)
I have an external monitor that it will detect and configure as the primary monitor on every boot. The fix is simple, I launch the nVidia X Server Settings and check 'Make this the primary display for the X screen' and things switch over just fine, however this needs done at every boot.
I'm sure I could export the X configuration file and that would take care of it, but I would prefer to leave the system to auto-configure each time (it feels right to have it this way). Is there a way to ensure that it will detect the built into the laptop screen as the default?
Instinct is telling me that it is choosing the larger display as the default:
Internal screen: 1440x900
External screen: 1920x1080
Any thoughts would be appreciated.

I finally found what appears to be the solution:
https://bbs.archlinux.org/viewtopic.php?id=120173
Not sure how I was unable to find that before hand.
Also, there were many files in xorg.conf.d:
-rw-r--r-- 1 root root 1761 Sep 9 13:12 10-monitor.conf
-rw-r--r-- 1 root root 193 May 5 23:56 10-monitor.conf~
-rw-r--r-- 1 root root 192 May 5 23:56 10-monitor.conf.broken
-rw-r--r-- 1 root root 1772 May 5 23:42 10-monitor.conf.bak-2012050502
-rw-r--r-- 1 root root 1959 May 5 23:39 10-monitor.conf.bak-20120505
-rw-r--r-- 1 root root 1696 Apr 20 13:36 10-monitor.conf.backup
-rw-r--r-- 1 root root 1696 Feb 11 2012 10-monitor.conf.PERFECT.bak
-rw-r--r-- 1 root root 1727 Feb 6 2012 10-monitor.conf.working-twinview
How does this directory work? Will all of these files be used for configuration, or just the ones ending in .conf?

X38 Platinum: Problem with CPU detection

Hi everybody,
I've got a little problem with my newly acquired x38/platinum...
I'm currently assembling a new PC on my own... So far all the component have been plugged-in EXCEPT the memory modules (I haven't purchased them yet).
Despite this complete lack of memory, I try to test the correct boot-up of the system.
And then the following problem occurs: the "lcd post" display hang on "CPU" (before rebooting indefinitely)... Not "DRAM" as expected...
The CPU is a Core 2 Quad, and is correctly powered with a 8-pin/12v connector. The CPU-Fan is powered from the correct on-board pins (cpufan). The speakers are plugged, but no specific "beep" are emitted.
One possible mistake I've made: the CPU-Fan is not fully plugged with the 4 "screws": i only (and hardly) manage to clip 2 of them, I'm afraid of breaking the board if y try too hard with the two others.
Could this problem be caused by the absence of DRAM? Or more likely by the the fact that the Fan is not fully clipped? By the way, is that normal that the CPU Fan is so Hard to plug correctly?
Any comments or idea would be greatly appreciated
Thanks (and sorry for the approximate english)
MH.

Quote from: Jack the Newbie on 23-January-08, 22:03:59
mhz42, please provide full system specs. Otherwise it is very hard to help you with your problem. What brand and type of memory are you using? What other components are part of your system configuration?
The mb is a x38 platinum 1333. The proc is a quad core qx8650, 1333fsb. The hd (western digital caviar) and optical drive (lg h66n) are both on sata and plugged. The memory used is 2go Kingston ddr3 1375mhz... (plugged in DIMM 1/2).
Anyway, I frankly doubt that the problem could come from anywhere else than the cpu (considering the post message)...
Quote from: Jack the Newbie on 23-January-08, 22:03:59
What PSU are you using?
A seasonic M12-500w... brand new...
Quote from: Jack the Newbie on 23-January-08, 22:03:59
Did you properly plug in ALL power connectors?
The powering should be ok... (the MB, the proc, the cpufan and the graphic card are plugged) The processor seems to be correctly powered, if it was not the case, the post process wouldn't even start (tested)...
Quote from: Aaron Yuri
You could just buy a cheap Pentium 4 and flash it with that.
That's an idea. Or i could directly ship the mb back to msi and thell them to do it themself... After all the spec says cleary "quad core compatible"...
So?
Just to be sure: the "since 1.1" from the compatibility table from MSI, refeers to the bios version right? Not a sort of MB revision or something?

HELP ME WITH HDX18 CPU UPGRADE GONE WRONG

I am not a regular member of this forum and logged on today because I really need help
Here is the story. I wanted to upgrade my old HP HDX18 to the Q9100 processor which is the highest one listed in the service manual. I studied the manual intently and made sure this was an ok upgrade.
I disassembled the notebook exactly as it was done in the manual down to the motherboard. I installed the Q9100 and then reassembled exactly as it was in the manual. I found with the hard drive connected, a Crucial M4 SSD-solid state drive, the computer came on for about 10 seconds getting to the windows logo and then shut down. However, with the drive disconnected I found that I could access the bios and the computer would not shut down.
I decided to reinstall the old processor and the exact same thing happened. I ran diagnostic tests while in the bios screen with the drive connected and it appeared all was ok. When the drive was reconnected I got this error screen.
I did use Phobya HeGrease. The Q9100 processor was a used processor off of ebay. I looked on the Intel website and it is unlikely this is an engineering sample.
I searched the internet and found that some others have had this exact same problem and they corrected by reseating the CPU. I looked at the CPU again and found that this seems fairly simple. It seems like its in their securely. Its just a drop in and screw. When its locked, I cant seem to get it out with my hands.
I read some articles about how too much Thermal paste might cause this to happen and I probably had on a bit too much.
So please help me out with any ideas. Right now my HDX18 is in a pile on the floor.
Thanks for your help!
Here is a video of exactly what is happening and you can see an error code in the diagnostic log which comes up towards the end of the video.
http://youtu.be/0Uup-iTRIaI

Mikeinjersey123 wrote:
I am not a regular member of this forum and logged on today because I really need help
Here is the story. I wanted to upgrade my old HP HDX18 to the Q9100 processor which is the highest one listed in the service manual. I studied the manual intently and made sure this was an ok upgrade.
I disassembled the notebook exactly as it was done in the manual down to the motherboard. I installed the Q9100 and then reassembled exactly as it was in the manual. I found with the hard drive connected, a Crucial M4 SSD-solid state drive, the computer came on for about 10 seconds getting to the windows logo and then shut down. However, with the drive disconnected I found that I could access the bios and the computer would not shut down.
I decided to reinstall the old processor and the exact same thing happened. I ran diagnostic tests while in the bios screen with the drive connected and it appeared all was ok. When the drive was reconnected I got this error screen.
I did use Phobya HeGrease. The Q9100 processor was a used processor off of ebay. I looked on the Intel website and it is unlikely this is an engineering sample.
I searched the internet and found that some others have had this exact same problem and they corrected by reseating the CPU. I looked at the CPU again and found that this seems fairly simple. It seems like its in their securely. Its just a drop in and screw. When its locked, I cant seem to get it out with my hands.
I read some articles about how too much Thermal paste might cause this to happen and I probably had on a bit too much.
So please help me out with any ideas. Right now my HDX18 is in a pile on the floor.
Thanks for your help!
Here is a video of exactly what is happening and you can see an error code in the diagnostic log which comes up towards the end of the video.
http://youtu.be/0Uup-iTRIaI
Hi,
The good thing is that the cpu is probably not the issue. I have noticed that a memory test failed so it could be magnetized during the disassembly/assembly. If you remove the ssd and are able to access the BIOS, it might suggest that the problem is the ssd. Make also sure that the memory is compatible with the cpu as better cpus support faster memory.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Second CPU detected

This does not seem to be a performance issue nor have I really had any problems, but since I just installed SpeedFan and the initialization on startup reminded me about this. XP sees 2 processors on the system. Why would this be and is it a problem??

Most likely you have a hyperthreading processor and it is indeed enabled. Enjoy the performance boost - it is a good thing.
You can check under CPU-Z or the windows resource graphs - you should see that there are 2 processors. HT in effect.
Pretty cool huh.

CPU Frequency is wrong??

I have a new 2.8 P4 on a 845ge max and the system sees it as a 2.33.
Ive tried changing the fsb setting in the bios and the multiplier but is is locked.
Any ideas..

Do you have a C stepping 2.8GHz CPU or do you have a B stepping 2.8GHz CPU?
Did you o/c in anyways?
Please read this Moan Guide.

Newbie: My CPU speed is wrong!

I have a KT3 Ulta-ARU motherboard and an Athlon 1400Mhz CPU with a 266MHz FSB. My diagnostics tools tell me my CPU is running at 1GHz though.
I can't get FuzzyLogic or the other MSI tools to work on my computer any more as they inevitably seem to just stop working and I can't uninstall them either. So how in the BIOS do I fix my CPU speed?
I know this is a dumb question but I just can't figure it out after reading the manual or searching around the site.
Thanks!

No I typically have trouble with the MSI tools. I do a clean install of WinXP Pro, and install the tools from the CD. Then I run LiveUpdate, and invariably one tool conflicts with another, or it tries to update one but can't uninstall it, or both. So I've just given up. My computer is due for an OS reinstall soon anyways.
I just got an MSI GeForce4 TI 4200 video card a week ago too so I would like to have the MSI tools working!

K7N2L CPU detection is wrong!!!

Similar Messages

Maybe you are looking for