K7n420 pro - wont restart

 ;(
Hi all, i have a weird problem with my new board. any help would be appreciated.
system specs
amd xp 2200
512 ddr
40 gig barracuda
geforce 3 ti 200 64mb card
win xp home
since building new system, if i try to restart pc, from desktop, it will hang after closing down, the monitor goes into standby and the system just halts.
if i shut down and turn on manually it works fine ??
i have found that when it hangs i can solve it by switching off at rear of case and then powering on.
this is really annoying when installing new drivers etc.
has anyone else had this problem?? any solutions?
please note i am new to this so any replies must be idiot proof.
thanks, yoshi

Quote
Originally posted by wonkanoby
try a different psu
thanks ill give it a try

Similar Messages

  • Mac Pro wont restart after Snow Leopard upgrade

    Hello,
    I have Mc Pro 3,1 8 cores with OS X 10.5.8. I upgraded to Snow Leopard 10.6.3 then download another upgrade to 10.6.3. The download was successful but I need to restart my Mac Pro but it won't restart. I'm seeing Apple Purple/Pink in desktop. I waited for an hour to seee if it will change but nothing Happen. Can anybody help.
    Thank you
    Arnold

    My own method, is to keep the old system as is, your safety net, and to do a clean install and let Setup Assistant help afterward.
    If or when you upgrade past Snow Leopard be sure to do so, leave everything behind, Lion and above do not include support for the PowerPC coded apps and would cause trouble.
    I think we have reached point where only 10.9.5 and Yosemite get full security support, Lion and earlier are gone as far as support and Lion did introduce a security bug just squashed finally but only in those later versions.
    If  you are not already, check out Carbon Copy Cloner then: http://www.bombich.com

  • Macbook pro wont restart

    I recently restarted my macbook pro and as a result it will not restart. It is displaying a white screen and it shows my user login and guest user login but whenever i enter my password it loads to about half way then stops, displays an error message then shuts off the computer making me do the process all over again. what is this problem???

    I would try to restore OS X from your recovery disk.
    Barry

  • My Macbook Pro wont restart after a system update

    I bought a macbook pro in November 2012.  I did a the most recent mountion lion system update.  It will only shutdown by holding the button.  When booted, after entering my password for the user, the mac will run but the screen is black.  The commands or trackpad do not respond.
    What do I do?

    First you should try to back up anything in your hard drive that is really essential, like files you can't afford to lose. Then I'd try to boot into recovery mode, which you do by restarting and holding down command R (I think. I've gone to bed so I'm doing this from my phone. But you can google recovery mode. ) once you have booted up in recovery mode, use disc utility (it will be very apparent where that is) and repair your hard drive and permissions, and then try to start up normally. The fact that the computer did start up in safe mode is pretty good evidence that there is a problem with some third-party software that you have previously installed, so this may require a trial and error process to find out what that software is that is causing the problem.

  • I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    Go to: Apple > Force Quit
    and select Mail > Force Ouit.

  • Macbook pro wont shut down without holding the power button nor cycle for updates to restart.

    macbook pro wont shut down without holding the power button nor cycle for updates to restart

    Sorry I said sorta wrong. I can shut down and I can update to the point of restart but it just sat for 45 minutes after an update. It goes through the update and to restart then the bars chase each other in a circle and it never restarts. So I hit the power button and go through normal reboot but loosing the update in the process. It does not matter how long I wait for a natural reboot after an update or click to restart it will chase the little bar in circles all day literally and never reboot.

  • Macbook pro wont shutdown

    macbook pro wont shutdown

    Holding the power button for 10+ seconds should shut it down.  But that stops all processes, including active read/write activity, mid-step.  Yuor system may not restart because the OS (not the disk drive itself) could be corrupted.
    Try option-command-esc to bring up a list of application to force-quit, that way only certain applications are forcibly stopped instead og the entire OS.

  • Macbook Pro wont wake from sleep

    My '08 MacBk Pro wont wake from sleep. This has happened several times since I installed Lion. In the past I have simply clicked several times on the trackpad until it woke, but on several occasions it actually shut down after entering sleep mode, (It went to black screen, the little pulsing sleep light was dark and I got no responce to clicks on trackpad or keyboard). When this happens I can usually re-start the Mac with a hard re-boot to resolve the issue. This time however, I can't get the computer to turn on. I've tried pressing the power button once, and all that happens is that the sleep light blinks once along with a the normal whiring sound you hear when the computer is ramping up, but this lasts only a second and then it goes back to black screen/dead Mac. I also tried holding down the power button as I would for a hard reset at which point I get several blinks from the pulsing sleep light and then nothing. I also tried unplugging the cable, removing the battery and pressing the power button for 5 seconds, then reconnecting battery and cable and pressing the power button, (I got these steps from an article posted here on the furums). BTW, I have disconnected all external drives, etc. before trying any of these steps. Please let me know if there's something else I might try to revive my Mac.

    Follow up: I took the MacBook Pro for repair and the tech found that the logic board was damaged - probably due to so many hard resets I had to perform to get the machine to load when starting it up after shutdown or restart. I replaced the logic board, (Very expensive) and its been running fine for 3 days. However, the freezing problem has just started again and I'm worried that having to perform a hard reset to get the macbook to load will cause more damage.
    The problem that's occuring is as follows: When I start the computer up after shutdown, or sometimes after restart, the desktop fails to load and the spinning color wheel appears. I can see the dock and the main upper toolbar but my desktop is blank and my external hard drives do not load. I can't make any selections with the cursor because of the eternally spinning color wheel, so my only option is to perform a hard reset by depressing the power button until the unit shuts down. When I start it up again the system loads correctly. I have tried ejecting my external drives before shutting down, but this doesn't make a difference. This problem started when I installed Lion OS and got continually worse until the computer finally shut down for good and I had to replace the logic board. Now it's starting to happen again.
    Has anyone else experienced this problem running Lion on a MacBook Pro early '08? If so, please help me find a solution for the freezes. 

  • K7N420 Pro Shutdown problem

    Recently my board is unable to shutdown properly. Its running XP which seem to shutdown OK but the CPU and case fan are left still running. Even pressing the off switch does not switch them off and I have to resort to the main power plug every time. When the board is in this state the D-Bracket LED indicator shows one LED "Boot Attempt".
    I've upgraded the BIOS to 2.8 and replaced the boards battery with no luck.
    Any ideas...
    Thanks in advance...
    System:
    K7N420 Pro with built in graphics
    BIOS V2.8
    Athlon 1.2 Ghz
    2 IDE HDD (40Gb, 100Gb)
    Windows XP

    You've probly installed some type of software that is causing your problem...the system isn't shutting down anymore, it's trying to restart instead...
    This is a rare occurance and a definite pain to track down...use msconfig to shut off any programs that are loading one at a time and see what happens when you reboot...you may have to reboot twice to see the results...
    Bonz  

  • Macbook Pro Keeps Restarting Itself and then totally crashed

    Dear all.
    I am using Macbook Pro 13-inch (i7 2.9 Ghz, 8 GB DDR3, 750 GB) with OS X Maverick (10.9.4).
    For the last few months, my Macbook Pro kept restarting itself and I usually ignored this issue until yesterday, my MBP fail to boot up, only display the grey apple logo and rolling icon below for almost 30 mins.
    I tried the safe mode and reset NVRAM method and it still fail to boot up and sometimes a black text appears (aka kernel panic).
    Then i took my macbook pro to the nearest Apple service provider and the technician said that it was probably due to the 750 GB Hard Disk since the HD itself is a faulty product, therefore we can't find any 750 GB HD nowadays. So he recommended me to replace my current HD with a new HD. I took his advice and I replaced it with 1 TB Toshiba HD. And then the technician reformat my MBP and installed the OS X Maverick. My Macbook pro able to boot up now.
    However the next day I still find my MBP keeps restarting itself (until now) and take note that I didn't install any new softwares, I only updated the available  updates in Apps Store for the OS, iBooks, and iTunes.
    Can anyone recommend me what to do? Is this a Hardware problem or software problem?
    I'm thinking to switch back to OS Lion to see whether this is mainly due to OS Maverick.
    Thank you.

    Unfortunately yes.   Since the computer is unable to boot up, that part of the software starts BEFORE the OS would.  Last time I had this problem, it turned out to be a faulty GPU (soldered to the logic board) and i needed to replace the logic board.    If you wanted to, you could indeed back up your personal data (you should ANYWAY, no matter what you do)  and you could try to do a fresh install,  but I'm fairly confident you are experiencing either faulty ram, or a faulty logic board.

  • Macbook pro wont connect to internet using cable, but connects using wifi fine

    My macbook pro wont connect to the internet using a cable, but connects using wifi fine.  I use wifi at home but sometimes need to use my laptop at work and connect using a cable but it says i'm not connected to the internet?

    Can you open a terminal and invoke the following commands:
    ping -c 10 localhost
    and
    ping -c 10 google.com
    You should normally get something like:
    PING google.com (74.125.224.103): 56 data bytes
    64 bytes from 74.125.224.103: icmp_seq=0 ttl=55 time=19.053 ms
    64 bytes from 74.125.224.103: icmp_seq=1 ttl=55 time=37.692 ms
    64 bytes from 74.125.224.103: icmp_seq=2 ttl=55 time=46.988 ms
    64 bytes from 74.125.224.103: icmp_seq=3 ttl=55 time=33.466 ms
    64 bytes from 74.125.224.103: icmp_seq=4 ttl=55 time=28.940 ms
    64 bytes from 74.125.224.103: icmp_seq=5 ttl=55 time=58.070 ms
    64 bytes from 74.125.224.103: icmp_seq=6 ttl=55 time=33.335 ms
    64 bytes from 74.125.224.103: icmp_seq=7 ttl=55 time=33.361 ms
    64 bytes from 74.125.224.103: icmp_seq=8 ttl=55 time=36.099 ms
    64 bytes from 74.125.224.103: icmp_seq=9 ttl=55 time=41.111 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 19.053/36.811/58.070/9.939 ms

  • How come my macbook pro wont play dvds?

    how come my macbook pro wont play dvds?

    Don't know!
    Please describe in detail all you have attempted to do in order to resolve the issue.
    Apple Portables: Troubleshooting the slot load optical disc drive

  • New macbook pro wont accept password

    I moved everything over from my i5 MBP to a new i7 via utilities migration assistant. However the new macbook pro wont accept my password, nor will it recognise the other user account passwords. Works fine on the i5.
    In Disc Utilities, change password asks me to select an image, but does not light up "change" when I select user.
    Any ideas?

    Is you new MBP the 2010 model or is it a newer model running Mountain Lion?
    If it's a newer model running ML, you can simply boot into your Recovery partition (hold down the Command and R keys whilst booting) and when you get to the Recovery window, select Terminal from the Utilities menu. In Terminal, type
    resetpassword
    and hit Return. A small app will open that will allow you to change the password for the user that you select. Then just reboot and use the new password.
    If, indeed, you're running 10.6.4, you'll need the installation disc to use the Reset password utility.
    Good luck,
    Clinton

  • My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it.

    My mac pro wont start. I push the power button and I get a click sound. A few seconds later another click sound and that it. I've tried different power plugs. Going direct into the wall, through a power strip. By iteslf, with other devices plugged in. I removed hard drives, and some RAM, and nothing. Sometimes it would not turn on, and then some minutes later it works. So its was sparatic, but now its been the same situation for three days where it wont turn on.
    I'm guessing power supply, but I wanted to see if anyone had a similar expereince and what the solution was, before I drag this beast to my local Apple store and have them look at it. Its a real pain to get it there and back and I want to be armed with some info for them. I already dragged this to them when it first started to do this, and of course it started up just fine for them. And you know if it works for the Genius then theres nothing wrong with. No matter what you explain to them.
    I figure if anyone had a the same problem and was able to resolve it, I can relate that experience to the Genius even if it start up for them.
    Thanks

    Try a SMC Reset using the extended method:
    Remove the AC power cord.
    Press the power-on button. [This drains the stored charge from the power supply]
    wait a quarter minute.
    Restore the power cord, being certain to JAM it into the socket, as the big block of rubber inhibits proper seating.
    wait a quarter minute
    attempt to power on.
    If no joy, examine the button battery half-hidden behind the graphics card. Remove it to measure the Voltage. A new battery should not cost over US$5, and measures a little over 3 Volts. BR-2032 is used in garage door opener controls and car door locks controls. The geeks at Radio Shack can measure it for you.

  • Macbook Pro keeps restarting when watching videos online

    My Mid 2011 13in, 500GB HD, 16GB Ram Macbook Pro keeps restarting whenever I'm watching videos online be it Youtube, or Xfinity or anyother video site. Browsing online works fine, nothing happens. I also watched a movie I had on my harddrive and that worked fine as well. The problem is with online video. I even tried it on both Chrome and Safari and I still get the same result.  This started about 3 days ago now my Macbook restarts around 8-10 times a day. It has become a constant hassle that I had no issues with before. After it restarts it leaves a Kernel Panic Report reading: Can anyone help me figure out what the problem might be? Please and thank you.
    Anonymous UUID:       670FCAE9-F1F5-AE74-F5F5-8A8512EB1FFF
    Sat Jan 11 19:52:29 2014
    panic(cpu 1 caller 0xffffff800d4dc19e): Kernel trap at 0xffffff800d48f983, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffffa014384240, CR3: 0x00000000440f6031, CR4: 0x00000000000606e0
    RAX: 0xffffffa014384230, RBX: 0xffffff802f6bd840, RCX: 0x00000000092e0000, RDX: 0xffffff800dad0180
    RSP: 0xffffff81de6abca0, RBP: 0xffffff81de6abd40, RSI: 0x0000000000000000, RDI: 0xffffff800dad0180
    R8:  0xffffff802e2b14c0, R9:  0xffffff802e1adfb0, R10: 0xffffff800dad15f0, R11: 0x0000000000000003
    R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0x0000000000000080, R15: 0xffffffa014384230
    RFL: 0x0000000000010283, RIP: 0xffffff800d48f983, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffffa014384240, Error code: 0x0000000000000000, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff81de6ab930 : 0xffffff800d422f69
    0xffffff81de6ab9b0 : 0xffffff800d4dc19e
    0xffffff81de6abb80 : 0xffffff800d4f3606
    0xffffff81de6abba0 : 0xffffff800d48f983
    0xffffff81de6abd40 : 0xffffff800d495493
    0xffffff81de6abd70 : 0xffffff800d48ec5d
    0xffffff81de6abda0 : 0xffffff800d48deac
    0xffffff81de6abde0 : 0xffffff800d47de5c
    0xffffff81de6abef0 : 0xffffff800d481e9f
    0xffffff81de6abf20 : 0xffffff7f8de9e594
    0xffffff81de6abf50 : 0xffffff800d83de23
    0xffffff81de6abfb0 : 0xffffff800d4f3e06
          Kernel Extensions in backtrace:
             com.apple.kec.pthread(1.0)[619F6A5D-FFA2-3B59-9993-958FD7154B83]@0xffffff7f8de9 d000->0xffffff7f8dea7fff
    BSD process name corresponding to current thread: fseventsd
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x000000000d200000
    Kernel text base: 0xffffff800d400000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 83564068609
    last loaded kext at 71031353796: com.apple.driver.AudioAUUC          1.60 (addr 0xffffff7f8ea2c000, size 32768)
    loaded kexts:
    com.symantec.kext.ips          3.2f8
    com.symantec.kext.pf          4.2.1f7
    com.symantec.kext.internetSecurity          1.3.2f5
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDAHardwareConfigDriver          2.5.3fc1
    com.apple.driver.ApplePolicyControl          3.4.12
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleHDA          2.5.3fc1
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleIntelHD3000Graphics          8.1.8
    com.apple.iokit.IOBluetoothUSBDFU          4.2.0f6
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
    com.apple.driver.AppleThunderboltIP          1.0.10
    com.apple.driver.AppleMuxControl          3.4.12
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleMikeyDriver          2.5.3fc1
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBTCKeyEventDriver          240.2
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleSDXC          1.4.0
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBUHCI          650.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.5.3fc1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleThunderboltEDMSink          1.2.1
    com.apple.driver.AppleThunderboltDPOutAdapter          2.5.0
    com.apple.driver.AppleHDAController          2.5.3fc1
    com.apple.iokit.IOHDAFamily          2.5.3fc1
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleGraphicsControl          3.4.12
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
    com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
    com.apple.driver.AppleUSBMultitouch          240.6
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.driver.AppleThunderboltNHI          1.9.2
    com.apple.iokit.IOThunderboltFamily          2.8.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 16 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x0000, 0x4B425F38475F44335F313333335F43390000
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x0000, 0x4B425F38475F44335F313333335F43390000
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: Hub
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1

    Before this, it said the hard drive died. However, replacing the brackets allowed me to continue using the original hard drive.
    If the hard drive died, replacing a bracket (whatever that means) could not possibly have revived it.
    The panic log indicates a hardware fault, probably in the mass-storage subsystem.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Print the first page of the panic report and bring it with you.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present. 
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

Maybe you are looking for