K7NG-ILSR 13 multiplier doesn't apear to work
Well, do fully in part to this forums advise I searched the internet for a company that was selling B core Thoroughbred. I found one that people where saying they where getting good luck with so I gave it a shot. Sure enough I got one. Very happy.
Anyhow, while experimenting with over-clocking it I realized the 13 multiplier doesn't work. It is actually x5. It My proc was showing as a 750 MHz or some crazy thing like that. I didn?t know what to think so I let it boot into windows and ran CPU Z and sure enough it said the multipliers was x5. I rebooted, when into the BIOS and changed it to x11.5 and it worked fine. Posted as a 1920 or something.
Is this a known bug or am I doing something wrong?
I have it stable at 10x187 = 1870 MHz.
I get 10,129 in 3D Mark with my Radeon 8500 . That's up from 7,230 with my old Duron.
I'm getting 2800+ in Sandra Mem Bench so I know the procs "unlocked" and clocking right.
Any ideas?
teekay wrote:https://bbs.archlinux.org/viewtopic.php … 7#p1288987
So this means I need to recompile the current kernel + these two patches? If so, is there a reason why they aren't integrated into the repository kernel?
Similar Messages
-
Dead MSI 4600 Ti - Killed by K7NG ILSR BIOS ?
Bios update via Live Update killed my MSI GF 4 4600
Hya folks
I wrote about my problem in BIOS forum too, but I got no solution. So I ask you guys here if you could help me out.
This is what I did with my new K7NG ILSR mainboard:
1. Launched MSI Live Update
2. Made it search for a new bios for my mobo K7N2G ILSR (6570)
3. It found new ver. 1.2 bios
4. I downloaded it via Update & flashed using it in Windows XP Prof
5. Flash ended in error pop up saying 'error in flashing vga bios' & that should do this manually (windows & pc as whole worked ok at this point)
6. I reflashed using Live update & this time floppy & everything went ok!
7. Rebooted into Win XP Prof as adviced
8. But no go! My pc's D-Bracket indicates that there are problems occurring when 'initializing video interface'
9. As a result of flashing my MSI GF 4600 TI VDT works no more!
10. I took out the GF 4 4600 TI and switched to integrated graphics & it works fine (using it now)
My worried question is 'What happened to my gf4 4600 ti coz it works no more in my pc? I tested the GF 4 in another pc and it didn't work on thet either - so it really is dead!
I did everything by the book so to speak. My pc case was closed through all the process, short circuits are out of the question. I doubt this is a power supply or memory module related issue becays the pc worked on beefore the flashi process. I really think that Live Update somehow messed the bios of my MSI GF 4 4600 TI VDT.
My rig is as follows:
AMD 2600+
2*512 333mhz Apacer ddr-ram
MSI K7N2G ILSR mobo (now bios 1.2)
Enermax 350 W Power
Windows XP Prof
Help me out if you can!
1. Can I flash my MSI GF 4 4600 TI VDT with original bios for that card?
2. Where I could get the bios & flash utility needed?
3. How could I flash my GF 4 4600 TI (do I need a pci displayadater to do it?)
I really would appreciate help!
Best wishes, TatuI've been busting my head to find out what happened. I've cheched, double quadruple checked everything I did.
I can see no reason why a such thing should happen!
So I think it just was one of those weird coincidences: two separate thing happening at the same time & one looks like the reason of another but is not.
I RMA my card! ;(
BTW - The mainboard (K7NG LISR) is great!
Best wishes, Tatu Heiskanen -
So i just updated my iPhone 5 to ios 7 and i can't turn on the location services...a press on the button wich turns on the location services but nothing happens and it doesn't apear green like all others softwere buttons.
General> Reset< Reset All Settings will work! Be careful not to erase! and you will have to redo all of your settings. Everything, ringers, even wifi will be lost! Big pain!!! I still dont have everything like I used to after the reset, but location services can be enabled again.
-
Wacom Tablet doesn't seem to work all of the time?
I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?Downloaded a driver from website, tablet works now.
-
Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
ThanksYou can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964 -
I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
Pdfmark code in MS Word 2008 doc doesn't seem to work properly to create Named Destination
Hi all,
I've been having trouble with creating Preview-compatible Named Destinations in Acrobat 9.x (see http://forums.adobe.com/thread/770470?tstart=0). Distiller, on the other hand, appears to create compatible Destinations, so as a last-ditch effort, I tried to go back to my original source file (Microsoft Word 2008 document) to use Distiller's pdfmark functionality, to see if maybe I could finally get a PDF with Preview-compatible Destinations.
Following instructions found elsewhere on this forum, I went into Word and inserted the following field into a test location in my document:
PRINT "[ /Dest /testdest /View [ /XYZ null null null ] /DEST pdfmark"
This field code is supposed to then cause a pdfmark to be inserted into the resulting PostScript and/or PDF files. Distiller is supposed to understand this and turn it into a Named Destination called "testdest." However, it doesn't seem to work - I don't see the pdfmark code in the PS file, and the PDF file doesn't have any Named Destinations in it.
I'm using Acrobat 9.x on Mac OS X 10.6.5, so I tried this two different ways:
1) Using the "Print to Adobe PDF" workflow (which replaced the "Adobe PDF Printer" from previous OS/Acrobat versions) - this automatically generates a PDF via (presumably) an API call to Distiller... and
2) Using the "Print to Postscript" workflow to generate a PS file, which I then ran through Adobe Distiller.
In neither case did I end up with a named destination in the PDF file, as I was supposed to. In case #2, even the Postscript file didn't have a pdfmark embedded in it. Thus, I'm assuming that perhaps this is particular issue may be a problem with MS Word 2008 rather than with Acrobat... but I'm hoping someone might have a clue as to how to fix it.
I welcome ideas on how to get Word 2008 to properly output pdfmark code, so that Distiller will pick it up and properly embed a Named Destination into the PDF...
Thanks in advance.
(If anyone has ideas about the Preview-compatible problem, linked above, that would also be great!)You're suggesting that it was never fixed from Word 2004 to 2008? Possibly. I wonder if it's fixed in Word 2011? Anyone know? But is it really a Word problem, rather than a Distiller issue?
I appreciate your offer, though I do have access to Word on Windows (2003, I think), so I could try Distilling there... I only worry about formatting, since there are minor differences (e.g. font kerning, etc.) between Mac and Windows that are subtle, but sufficient to create formatting issues for very long documents (e.g. pushing figures onto the wrong pages, etc.). That would be a rather big problem.
The question remains whether this is an issue with Word or Distiller, though... and whether it's fixed in Distiller X and/or Word 2011.
Adobe, care to comment?
I'd really love to find a proper Mac solution, if one exists... it would be rather a slap to Mac users if a solution doesn't exist. -
Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386 -
I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!Have you got Siri turned on in settings/general/restrictions?
-
My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!
Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?
-
Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.
OK, it's very bad computing to use a backup disk for anything but a backup. The reason being is if/when the HD crashes you will have lost not only all your backup but the data files. While I commend you for wanting redundant backup, you really need separate EHDs for doing so. Format each EHD using Disk Utility to Mac OS Extended (Journaled) using the GUID parttition. When you connect, OS X will ask if you want to use that drive as a Time Machine backup drive, select yes and then let it backup. On the second EHD format the same way however do not use TM as a backup, this time I'd suggest an app such as SuperDuper or Carbon Copy Cloner to make a clone of the internal HD. Leave both EHDs connected and TM will backup new or changed files automatically on a hourly basis. The clone you will need to set to backup on the schedule you want. For example I have my SuperDuper EHD set to backup only changed or updated files at 2AM every day.
The advantage of a clone is that if the computers internal HD crashes you can boot from a clone and continue working, TM will not do that but it's great for keeping an archive of all files. So if you want a version of a file from many months ago, TM will help you locate and restore it. -
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al -
My goal is to acheive 3 of the following things.:
Have all my apple devices sync pictures to the icloud *without* syncing the pictures on all the devices...so just one direction from device to cloud and not have all the devices insync from the cloud...... I don't want all the devices in sync, I just want the pictures protected in the cloud. To do this, I've tried to just turn on "icloud bacn-up" and not turn on "photo stream" to acheive this, but doesn't seem to work.
If #1 is possible, then I would like to sync the icloud with a folder on my PC using the icloud app for the PC. Not sure if I can have only the icloud PC sync and not have all the devices in sync?
If #1 and #2 could work, then I would sync the PC folder with my local storge.
end result would be all my photos save in the cloud and a safe copy my home in my local storage. I would have thought that most people would want to do this, but doens't seem so obvious to me as to how I can get it to work?
Any help would be appreicated.
thanksYou can't use iCloud as a safe place to store your photos when they are deleted from your devices. iCloud designed to stream photos to your devices, and to back up photos currently on your your devices as part of your iCloud backups. However, photo stream photos only remain in iCloud for 30 days, giving your devices enough time to download them. And if you delete a photo stream photo from any of your devices, it is also deleted from iCloud and from all of your devices. Furthermore, while camera roll photos are included in your backup, if you then delete the photos from your device and continue backing up, the backup containing the deleted photos will be overwritten by one that doesn't, and they will be lost.
If you want to save your photos, import them from the camera roll to your computer as explained here: http://support.apple.com/kb/HT4083. Then you can delete them from your device.
If you would rather have a cloud-based place to store your photos, look into a service such as Dropbox.
Maybe you are looking for
-
Applet loads/plays in preview, but not on live web host server
When I use FireFox 3 to browse to the flexdc08.htm document (yes, javascript is turned on) I get this message in the browser status bar Applet llp3 started. But, only a blank page is ever displayed, nothing ever gets loaded, the application nev
-
Why can't I work with ColdFusion documents?
Um... just updated and went to open some ColdFusion files I normally work with but can't open them at all. They are grayed out. And there is no longer a ColdFusion option in the "New" panel. And in preferences you cannot select ColdFusion as the defa
-
Data Guard Transport and Real Time Apply Configuration
Hello, I'm configuring a Data Guard configuration using Oracle 12.1.0.2 and I have observed that in a máximum perfomance configuration, that is the default. The system upgrade to a SYNC configuration. DGMGRL> show configuration Configuration - DRSolu
-
FIM Synchronization Service Event ID 6050 , 6126
FIM Synchronization Service Event ID 6050 , 6126 Version : SharePoint 2010 Sp1+ CU12 14.0.6129.5000 i have saw daily in my logs regarding User profile Service and FIM Errror . Daily 1 AM scheduled time for User Profile Incremental Running. And also.
-
[SOLVED] Hide sudo entries from journalctl
Is it possible? I mean to remove sudo logging completely, because on every sudo command I run there are 3 lines of text added to the journal, and it's getting harder to find something more important than sudo in there... Last edited by mooop12 (2013-