K7T Pro 133 (MS-6330)

When I try to boot my machine I Get a constant beeping sound and the system will not boot whatsoever any clues as to what is happening ?
Mike ;(

I have done all of the above replaced PSU, memory and processor and fan also but nothing seems to work ? any other ideas ?
I have also just found out that I can't return my motherboard to the company I purchased it from because they have gone bust, is there any other way I can return the motherboard to the manufacturer ?
Mike

Similar Messages

K7T Pro2-A (MS 6330) Boots for 4 secs then turns off Please Help !!

X-((Hey guys,
Thought I would give this a shot before i take this mobo back to the store ....
Some insight to my reason for buying this mobo....My mothers ABIT kt7a-Raid quit powering any agp and PCI devices so I went out and bought her the K7T Pro-2 (MS 6330). I am using a AMD 1100 Tbird i beleive (its been awile and several puters since i built it for her) A1100AMS3B to be exact ....... I hope this is from memory w/o taking the h/s back off. I am using the same Alpha Heatsink/fan
Now the P/S does suck as the case was a cheapy deal but i have already set my true AT 430 on it and i get the same results.
With nothing pluged in no Vid, no PCI devices, not even the Memory or IDE for HD it boots for about 4 seconds with the LED going red-red-red-red at first to blank-green-red-red then the led b4 shutdown green-red on first 2 with last 2 red-red then blank-red-red-red then it shuts down automaticlly.
these results i got with all or just some devices plugged in troubleshooting diff things
so I am basiclly not used to having to spend 2 evenings id rather be playing games working on this thing and am to the point of taken her back to the store. Now i dont wanna trash the MSI board its just my second experiance with one and neither was impressive.....And yes I know this isnt a top of the line board but seemed to be the only thing i could find from my reliable local retailer.
any help would be great and thanks in advance!

Any chance your heatsink isn't fitted tightly on the CPU or that you have an extra snand-off shorting the board to the case where there isn't a hole in the board ?
Did you try clearing the CMOS ? Clear CMOS Guide

K7T Pro won't start up

I have a K7T pro (MS-6300) the last time I turned it off of the screen turned black but everything else kept running. No matter what I did it wouldn't turn off. I unplugged it plugged it back in and it would power itself back on and still have the same symptoms. The diagnostic led's currently all are lit red. I have pulled the batt and jumped it to discharge it and after that the only change is that when you plug it in it doesn't automatically power up but when pushing the power button it is still locked up I Unplugged everything, ie. drives, video card and modem nothing helps. It is acting like the bios won't initialize. I also put another cpu in the motherboard and still have the same problem. Can anyone help?

Interesting - sounds exactly like my problem below:
"K7T Pro 1.0 (6330) not waking up (?)"
It's like the computer comes instantly on (no startup sequence), but then there's no video and no response to kbd.
Il'll repeat my story here:
---------- 8To my delight, I discovered this morning that my K7T Pro 1.0 Linux server does not respond in any way even if it seems to be on.
I have this strange gut feeling that it's in suspend or standby mode, and refuses to wake up. Other theories are:
* partly broken PSU or
* some weird static electricity build-up and damage (2 months uptime, pwr outlet not grounded).
I 'm stuck: Any help or hints are welcome!
Story this far:
I went to check the situation: even if the computer is on (power light lit, fans spinning), there's no video, and Ctr-Alt-Del does not work.
I turned it off (pressed pwr button 4-5 secs), disconnected the KMV switch box, connected VGA and kbd cables directly to the PC and turned it on again.
Looks promising: power light turns on, fans (cpu + psu) start to spin.
Disappointment: no video, HD does not spin up, no POST beeps to be heard.
After the power is turned on the 4 diagnostic leds light up red and stay that way - no blinking. I recall this is the normal situation when the computer has booted and is running (The manual states that they all should be green after the boot, however. Should the leds be all red or all green?).
Last try: I cleared the CMOS (jumpered JBAT1 to 2-3). No effect whatsoever.

Were is the temp sensor on a k7t pro MS-6330

i have a k7t pro MS-6330 and would like to know were to "system" or "case" temp sensor is as i wana make sure it is not reading falesly (hiden behind a ribon cable etc (may be the msi H/G coul help)
cos i needed to know the anserw
( i've looked for it but dont even know what to look for ? )
please help someone!

An Athlon XP could run in your board but it would only run at about 75% of it's clock speed due to the fact your board doesn't support 266MHz FSB.
Officially you should only use a Duron1300 or old Athlon 1400/200 if you could still find one.
A 250w PSU could limit you depending on the rest of your hardware and the exact model/ratings of this PSU.

K7T PRO (6330) wasted?!

Can anyone help me out?
Today I bought an Athlon Thunderbird 1333MHz 133FSB for my old K7T-pro(bios v3.2) not knowing wether it would work or not.
At first the computer booted, but showed 1000MHz, I changed the CPU Host/PCI clock graduatly until my computer just stopped booting.
And here's the problem: After repeatedly switching the CMOS clear jumper, removed the battery(few minutes), switched to the old CPU(Duron 600), the system still won't boot. Some fans and leds works, but thats it.
Diagnostic LED status: X( X( X( X(
which should indicate CPU malfunction.
(I've reset the bios before succesfully for other reasons)
Have my overoptimistic CPU change wasted the motherboard, or are there other ways to reset it or whatever?

http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=97%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330
one step beyond
try cmos and pull battery as well

CPU help MSI K7T Pro ms 6330

will a AMD MOBILE ATHLON 4 1.2GHZ 200FSB AHM1200AQQ3B work on this board msi k7t pro ms 6330 ver 2.1

i dout it ,but to say no for sure you will have to try
its certainley not one msi ever tested in it

Problem with K7T Pro (MS-6330)

I've been used MSI K7T Pro (MS-6330) for 2 years and it worked just fine. But recently the problem occurred. After I've upgraded CPU from Duron 600 to TB 1.2 GHz, when I run a heavy-loaded application such as 3DMark, 3D games (UT2003) my computer will stop working (IMO: my case just like the classic K7T Pro) but when I touched the SC1155 chip, it just warm (it won't burn my finger). So I'm confused that is my mobo defected or not?
Oh, almost forgot .. my mobo was modified and can adjust multiplier.
FYI:
I've tried underclock CPU to 950 MHz and I've found that 950 work fine (or at least it use very long time to run full-loaded and then die). Once I forgot to plugged electric-cable for my heatsink fan and temp goes 66-68C and still working normally (not running 3D app.)
So, can anyone suggest me what is the problem with my mobo?
Thank you very much and apologize for my language :P
My Spec:
AMD Athlon (TB) 1.2 GHz (but now run @950MHz) VCore 1.55 (tried 1.55-1.85 result is the same)
MSI K7T Pro (MS-6330) modified to adjust multiplier
250W Powersupply
256 MB PC133
Winfast GF2MX 32 MB
SB Live! Value
Lite-on DVD16x
2 Harddisk (40GB and 4 GB)

Hi,
RMA the board, contact your nearest MSI office and ask for the RMA department.
There is not much more you can do.

Req: K7T Pro MS-6330 and CPU

Pls, I have MSI K7T Pro motherboard. In support page there is written that this MB supports Duron up to 1.1 GHz and Thunderbird Athlon up to 1.2 GHz (100 FSB) with a little older BIOS 314 . Is the info true and recent or are there any news on it and it supports at least Duron 1.2 GHz or higher CPU ?

I have the MS-6330 v5.0 board Running an XP1900+ CPU (1.56GHz). The more recent BIOS images allow for higher CPU speeds, but it is important to check the version # of you board to verify the version of the BIOS falsh it can handle. With the v5.0 boards you can use BIOS v3.6 which allows 2200+ CPU's

K7T Pro (MS-6330)

I have a k7t pro and I want to get an athlon xp 1500+ in it. I know its not going to use the full potential of the processor but it is cheaper than an amd athlon 1.2 tbird.
I was running an amd x 1800+ on it before because i got it in a pulled system for free. it worked fine but will a 1500+ work stabily?

Dear Assaf !
'Since the K7T Pro only supports 200MHz FSB an AXP 1500+ (1333MHz) will only run at 1000MHz.'
This is true if you don't modify the processor.
On the other hand if you unlock the processor (paint the L1-bridges), paint/cut the L10 bridges and change the multiplier, then you can run the CPU at it's full speed.
I am currently running a XP1800+ (1533MHz) on a K7T Pro2 board with 102MHz FSB and a mult. of 16 (8 in BIOS +8 by CPU) at 1.63 GHz.
Regards,
/ErnyH

Msi k7t pro MS 6330 - best graphic card

hello gentlemen
As announce subject I am k7t pro ver1 owner. Nowadays the MB is provided with riva tnt2 model 64 - yeah it is old one. I would like to change the graphic card, up to the good one. So is there any graphic card you know may be recommend? Some VGA x4, having best technical parameters to the mainboard?
Kongo

thanks for reply
sure, I do not intend play newest games, anyway I wish to play hitmanII, or III and IGI-2 - some ! The MB I have is retired. Max CPU to the MB is 1.2G Athlon - and I fited out with it (1.2 Athlon). Power suply is powerful 350W of good make; also 448 sdr sdram is going to be. I just do not know if Geforce 4 will be suported by the MB. AGP port is 4x only.
Man, did I well anderstand you? You mean that if I plug in 8x graphic card the system wil be stable? Ex. MSI GForce 4 Titanium 4200 128DDR? And will work fine on the MB?
Anyway I wish to plug in as good as possible (or something about) graphic card... so are there any suggestion ?
Kongo

K7t Pro 6330

I want to put on a MSI K7T PRO an AMD thrton 2000+. If Would I update my mb with the last bios version, may my pc work? (i'm sorry for some error but i'm Italian)
P.S: Speak simple so i understand you

It appears the highest CPU that board will accept is a 1.2 Athlon Thunderbird.
K7T Pro CPU Support See here.

Windows 2000 (SP3) crashes on K7T Pro

Hi
I have a this configuration:
K7T Pro (BIOS 3.6)
Athlon 1200
256 Ram pc 133
Geforce 3 ti200 detonator 40.71
hdd 20gb maxtor
Windows 2000 with SP3
directx 8.1
4in1 drivers
the problem is windows hangs and the 4 back leds turn all green on any application and more specially on games like quake 3, i want to know if its caused by some drivers? or do i need to install a patch for windows 2000 that fixes some AMD issues or mobo problems?
help would be apreciated

Sure you can Install a lv application manually. just copy the exe-file,
support files in a folder. For the runtimeengine just copy the file
lvrte.dll in the folder of your application or in the windows system folder.
Hope that helps, Niko
BB Herman wrote:
> Why will a stand alone executalbe with an installer work on windows
> 2000 and crashes on windows xp professional?
>
> When I run the setup.exe file on a Windows 2000 system it installs
> properly, but the same file run on a XP Professional system I get an
> error stating Fatal Error: Installation ended prematurely because of
> an error.
>
> See
> HREF="http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000...
for more information on the specific installer I'm trying to
> use.
>
> In fact I get this error for any stand alone executable I try to
> install on any XP machines. I am using LV 7.1. Is there a way to
> manually install everything?
>
> Thanks

Win XP & K7T Pro 2

MSI K7T Pro 2-A
AMD Duron 700
PSU 300W
256 Ram (133)
3d Prophet II Mx
AOC monitor 7Vlr
here's the problem:
My computer freezes very frequently. (when running outlook Express, IE6, or any kind of software...)
2 things can happen then:
- a blue screen appears telling most of the time: DRIVER_IRQL_NOT_LESS_OR_EQUAL (but not every time) and physical memory is emptied. then I can reboot my computer with a reset.
- monitor screen suddenly become black but computer is still running and I can stop it only by switching off the power supply. nothing else works.
I noticed also that many programms crashed with no specific raison. (music player, internet explorer, etc)
What is weird is I have Win XP running with no problem during 6 months and one day all these things happened .
I have downloaded all the latest drivers, flashed the Bios, tried with different material. (tried different ram)
I brought the computer back to my vendor and they told that the PSU was dead so they changed it but I'm still having troubles ...

yes I read many threads on the forum about this problem.
at least cool to see I'm not the only one to have this problem..
However I can't see anything wrong when watching on my mother board.
I checked temperature and it stays between 35°C & 39°C.
Cooler seems to have a normal speed.
But the fact is now my computer is crashing after 10-15 minutes.
BTW what about the latest MSI mobos? any problem detected?
and if I want to keep my AMD Duron processor which mobo should I choose?

K7T Pro-2 U rev 1 turn off after 20secs.

Hi,
Houston, i got a problem!
My computer has always been working fine for at least 13month, period of first use of my motherboard and CPU.
Well, 2 weeks ago, i got this first crap, screen turned off and all devices too, just the motherboard was running, thus i shutdown and re-turn on my computer--> nothing and 4 red LED.
CPU dead? i guess no 'cause, i plug off my PowerSupply cable and re-plug it in, the system's running while 20-30seconds and shutdown but fan's still running, though if i reboot it, i got 4 red disgnostic's LEDs, and i just have to plug in/off PS cable to reboot system which will finally shutdown after 20-30seconds....
I try to change some parts: memory, gfx card, therm' paste, plug off all devices --> no chance
Anyway about Therm' paste, i first used silver grease, but during 10month i haven't gotten any problems, i changed sliver grease for thermal paste now, but problem stills.
My box:
MSI K7T Pro-2 U rev 1
Duron 1,2 Ghz
392 SDRAM PC 133
Geforce 2 MX
cheers
ps: sorry for my english, it's not my first language.

oh no, this is not this kind of traces, it's lighter and really fine, maybe it was just a layer of dust.
Anyway, capacitors don't seem defect.
Well i repeat to be sure :
i can boot my computer, the detection cycle pass but during boot 20-30sec later, screen/devices turns off but fans still running.
if i reboot, i get 4 Red LED thus i have to plug off my cable from wall and re-plug it in to have the possibilty to redo boot detection until it crashs 20 sec later .
Thus the MB can turn on, i see bootsequence and even linuxboot on my screen.
I have disconnected my HD because when i boot on it with "Trend Antivirus" enabled from BIOS, it shouts: "Boot virus detected, type ENTER for ..etc..etc.."
Nevertheless, even with no devices enabled except Dvd for booting with a LinuxLive i go to the wall after 30sec
CPU is well detected
Memory also (3x128) i tried several combos and other memory
About PSU, i haven't opened it yet even if i have doubt about its culpability.
cheers and really thank you!

Compatibility of Duron 1.2Ghz with K7T Pro 2-A

Hi, can anyone tell me if Duron 1.2Ghz can be used on my motherboard which is an MSI K7T Pro 2-A? My manual which comes with the mb gives contrasting information to the one supplied on the website. Will the cpu spoil if it is used on an uncompatible board?

duron no thundebird with 100 fsb yes,not the 133 fsb as it only shows as 900
similar thread bit below
http://www.msi.com.tw/program/service/forum/index.php?threadid=11301&boardid=13&styleid=1
based on this
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php? UID=97%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330

K7T Pro 133 (MS-6330)

Similar Messages

Maybe you are looking for