K7T Pro2 and MSI TI4200: Please HELP!!!
Hi
I have an MSI K7T Pro2 motherboard. I got few weeks ago a new video card: MSI TI4200.
After the installation in the case and power on of the PC I can't see any image. The monitor remain black without signal. I can hear one long beep and 2 shot ones.
I tried the following workaround:
- Reset CMOS
- Set AGP to 2x
- Disconnet all peripherals (audio card, nic card, cpu fan, usb peripherals)
Looking on the forum someone suggested could be the PSU so I have replaced it with a new one with the following specifications:
DC Output: 350W
+3.3V: 20A
+5V: 35A
+12V: 16A
3.3V & 5V: 175W
But still does not work! ;(
Bios on the motherboard is updated at the latest release.
Please help me. Do you have any idea?
The funny stuff is that I decided to get an MSI video card to avoid incompatibility with my MSI motherboard so please MSI don't betray me!
Thanks
Mario
Diabllo
I forgot to write that I tested the video card on my brother's pc and it works fine. The nice stuff is that my brother has a 350w PSU with 165w combined 3.3v+12v.
The difference is that he has a newer motherboard not MSI.
Thanks
Similar Messages
-
MSI 5870 Crossfire Option not available on MSI GD65 - PLEASE HELP
Hi All,
I just installed two MSI 5870 on MSI GD65, install the latest driver from ATI, however, I can't find the crossfire option under the CCC Graphics drop down list....
All setting is set to standard, no overclock for the CPU.
I have tried several ati driver up to current and beta ones....but still no luck.
According to Graphics Hardware under CCC, the 2nd graphics adapter is disabled......
However, under the control panel the 2nd graphics card is installed and enabled.
Please help.
many thanks.Here is my specs:
■CPU i7 860 2.8 Ghz
■Motherboard MSI GD65 BIOS version 1.4
■Memory Team Xtreem 9 9 9 24 ddr3 LV 2000 8 GB
■Video card MSI 5870 1GB CROSSFIRE
■Hard drive SEAGATE
■Any other peripheral cards and devices : Creative XFi Ultimate
■Operating system and version: windows 7 32 bit
■Power Supply Unit CORSAIR HX 850 W
I am using catalyst control converter:
Driver Packaging Version 8.661-090923a1-083742C-ATI
Catalyst™ Version 09.10
Provider ATI Technologies Inc.
2D Driver Version 8.01.01.961
2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001
Direct3D Version 8.14.10.0700
OpenGL Version 6.14.10.9026
Catalyst™ Control Center Version 2009.0925.1707.28889
I don't even can see the CrossFire option there...below the ATI Overdrive..................
Any more ideas or solution? -
My appstore wont let me download anything. It says i have to agree to the terms and i agree and again it pop up the same thing over and over! Please help me
I thought i was the only one!! but its happening on my ipad! and i dont even want to try on my iphone uhhh its annoying!
-
"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!
Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.
-
I have an itunes account on my home PC. I want to use my same account but on my laptop. How do i do this with out wiping out my phone and backing up all my Pictures and Apps? Please Help.
Copy everything from the old computer or your backup copy of your old computer to your new one.
Type "move itunes library from pc to mac" or similar into the google search bar. -
I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!
Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi
Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
My iPod shuffle will not turn on, nor is it recognized by the computer to pull up iTunes. I have order new USB cords and nothing. Please help! Not sure of the generation of iPod shuffle, I think 3rd.
first: why did you download the iOS Beta 8? If you are a developer, go to the Apple Developers website and check what they can do for your case.
second: setup an appointment to a Genius Bar for service. -
I need to pass a query in form of string to DBMS_XMLQUERY.GETXML package...the parameters to the query are date and varchar ..please help me build the string .Below is the query and the out put. ( the string is building fine except the parameters are with out quotes)
here is the procedure
create or replace
procedure temp(
P_MTR_ID VARCHAR2,
P_FROM_DATE IN DATE ,
P_THROUGH_DATE IN DATE ) AS
L_XML CLOB;
l_query VARCHAR2(2000);
BEGIN
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
',''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = '
||P_MTR_ID||
' AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE('
||P_FROM_DATE||
',''DD-MON-YY'') AND (TO_DATE('
||P_THROUGH_DATE||
','' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
SELECT DBMS_XMLQUERY.GETXML('L_QUERY') INTO L_XML FROM DUAL;
INSERT INTO NK VALUES (L_XML);
DBMS_OUTPUT.PUT_LINE('L_QUERY IS :'||L_QUERY);
END;
OUTPUT parameters are in bold (the issue is they are coming without single quotes otherwise th equery is fine
L_QUERY IS :SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),'9999999.000') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),'$9,999,999.00') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),'9999999.000') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,'mm/dd/yyyy') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,'hh24:mi'), '00:00','24:00', TO_CHAR(s_datetime+.000011574,'hh24:mi')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '1'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,'DD-MON-YY') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = N3165 AND s_mtrch = '2'
AND s_datetime BETWEEN TO_DATE(01-JAN-13,'DD-MON-YY') AND (TO_DATE(31-JAN-13,' DD-MON-YY') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)The correct way to handle this is to use bind variables.
And use DBMS_XMLGEN instead of DBMS_XMLQUERY :
create or replace procedure temp (
p_mtr_id in varchar2
, p_from_date in date
, p_through_date in date
is
l_xml CLOB;
l_query VARCHAR2(2000);
l_ctx dbms_xmlgen.ctxHandle;
begin
l_query:= 'SELECT
a.s_datetime DATETIME,
a.downdate Ending_date,
a.downtime Ending_time,
TO_CHAR(ROUND(a.downusage,3),''9999999.000'') kWh_Usage,
TO_CHAR(ROUND(a.downcost,2),''$9,999,999.00'') kWh_cost,
TO_CHAR(ROUND(B.DOWNUSAGE,3),''9999999.000'') KVARH
FROM
(SELECT s_datetime + .000011574 s_datetime,
TO_CHAR(S_DATETIME ,''mm/dd/yyyy'') DOWNDATE,
DECODE(TO_CHAR(s_datetime+.000011574 ,''hh24:'
||'mi''), ''00:'
||'00'',''24:'
||'00'', TO_CHAR(s_datetime+.000011574,''hh24:'
||'mi'')) downtime,
s_usage downusage,
s_cost downcost
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''1''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,''DD-MON-YY'') + 1)
) a,
(SELECT s_datetime + .000011574 s_datetime,
s_usage downusage
FROM summary_qtrhour
WHERE s_mtrid = :P_MTR_ID
AND s_mtrch = ''2''
AND s_datetime BETWEEN TO_DATE(:P_FROM_DATE,''DD-MON-YY'')
AND (TO_DATE(:P_THROUGH_DATE,'' DD-MON-YY'') + 1)
) B
where a.S_DATETIME = B.S_DATETIME(+)';
l_ctx := dbms_xmlgen.newContext(l_query);
dbms_xmlgen.setBindValue(l_ctx, 'P_MTR_ID', p_mtr_id);
dbms_xmlgen.setBindValue(l_ctx, 'P_FROM_DATE', to_char(p_from_date, 'DD-MON-YY'));
dbms_xmlgen.setBindValue(l_ctx, 'P_THROUGH_DATE', to_char(p_through_date, 'DD-MON-YY'));
l_xml := dbms_xmlgen.getXML(l_ctx);
dbms_xmlgen.closeContext(l_ctx);
insert into nk values (l_xml);
end; -
The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.
Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I try to access the itunes store and my bar goes halfway and stop. Please help
I am trying to access the Itunes Store and my bar goes halfway and stop.
Please help.Is it endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?
-
By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan
Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.
-
I received a replacement iPad. On my original iPad I had dozens of books and PDF's. I completely backed up my original iPad. The categories of my iBook files transferred but NOT the actual PDF and Books. Please help.
Are the PDFs and ibooks on your computer's iTunes ? If so then you should be able to re-sync them, if not then you can re-download ibooks for free as long as they are still available in the store and you use the same iTunes account as you originally used to buy them : http://support.apple.com/kb/HT2519 . The backup doesn't contain the contents of the ibooks app, so for them to be restored to the device they needed to be in your iTunes library.
-
One particular song wont play and was playing earlier and now skips please help
one particular song wont play that could play earlier and now skips please help
i would delete and re download it from itunes if you purchased it form them
Maybe you are looking for
-
DVD Pro Is EXREMELY SLOW and slow system
I am running DVD Pro Studio on a PowerMac G5 with 4 meg of RAM It is painfully slow... the inspector freezes when I try to show shapes.. loading assets in stills (granted they are big files) is beyond painful frankly I went to a mac to do just this..
-
ADF 10g: addPartialTarget is not refreshing the complete PanelForm
Hi, I have one table and one panelForm to display the values for the respective table selection. Also there is one delete button in the table to delete record from it.After deleting the record, in my backing bean class I am refreshing the table and t
-
Can you search two artists at once in itunes
I wanted to listen to two different artists and I know I can just make a playlist and that's that, but I was wondering if there was a way to search for both artists at once like perhaps if in the search bar i could type "dante; turtl" and that would
-
Question about Local and Central Services Registry
Hi guru, We are using CE7.2 and have deployed some BPM DC to it. After deployment, we can see the web service (we made to start the process) from the local SR. Now we want to build a central SR on aonther machine (AS Java + SLD + SR) and re-point the
-
Keep grid scroll position across updates?
I have a JBoss app server status monitor that uses the XML status page to update a Flex grid control. I can scroll down in the list, but when the grid auto-updates, it puts the scroll position back at the top of the grid. This is very inconvenient fo