K7T ProV1 Don't start(classic)

I already saw the same topic on the old forum. The problem is classic, i run a 3D game and boom the screen goes black and my computer won't start for a day, or more... Not all game do this... The worst one is Warcraft 3, as soon as i press the new game button it crash. W3 being so fast to crash, it let me thinks that it's probably not the heat.
In fact i'm sure it's not an overheating problem because i have a huge fan on my mboard chipset. I'm sure it's not a powersupply problem or a lack of power because of my config:
MSI 6330
Athlon 1Ghz
512SDRAM
ASUS Geforce2GTS deluxe 64DDR
Leadtek 10/100 RTL8139 ethernet adapter
SMC EZ Card PCI 10 adapter SMC1208
WD 20Gig 7200RPM ATA66
ENERMAX 450 (431 Watts) 2 fans
Pioner DVD
Matshita CDR/W
This powersupply is AMD certified and is much more powerful than what i need. It's not my CPU i tested it on my friend's computer.
I doubt it's the infinite loop problem because i already saw this once and the computer doesn't refuse to boot after.
My big problem is also that my seller is out of buisness. If i want to have a new MB will MSI change it? I mean, i have this MB so MSI know i bought this product... But will they replace it?! :( ...

Hi,
Contact MSI at [email protected], they will tell you what to do.....
But your board shouln't be older then 2 years....
As I think it needs to be repaired..

Similar Messages

Problem Starting Classic

Hi, I need help setting up classic. When I try to start it it says i have insufficent priveleges to start classic and to correct the priveleges. How do you correct the priveleges?

NewAgeHippie2200: Try the suggestions in this article; part of the article explains the correct way to repair your permissions in 10.15.
Templeton Peck: NewAgeHippie2200 is using Mac OS X 10.1x, and the version of the Disk Utility included with 10.1 cannot be used to repair permissions; this functionality was added in 10.2. A separate Repair Permissions utility is needed in Mac OS X 10.15, and earlier versions of Mac OS X don't have any mechanism to do this.
(10868)

Error Messages when Starting Classic

When I start Classic on my MDD and G4 AGP computers running 10.4.5, I get a message several times stating "Connection Failed -This server may not exist or it is not operational at this time. Check the server name ..., etc.” that I have to click away before loading finishes. I can’t find a setting anywhere that causes it and I don’t have anything in the Start Objects or Server folders. Any ideas what could be causing it? When I boot directly into the same 9.2.2, I don't get the messages. They is not a big problem but rather annoying and I would like to get rid of them.
Thanks in advance.
Gary

Hi, Gerald. Inside the OS 9 System Folder that you use for Classic operation, you will find a Startup Items folder. (This is different from the StartupItems folder that controls what, if anything, opens immediately after you start the computer up in OS X.) Check that folder for anything that tries to connect to the internet when you double-click it. If you find such an item, you may want to remove it from the Startup Items folder.

After IOS 8 upgrade IPad 2 don't start

Hi,
After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

My ipad2 is having the same problem. I can get it to start up by plugging the charger in. I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

WEB.SHOW_DOCUMENT don´t start Firefox 3.5

Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
Thomas

Hi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas

Oracle 8.1.7 on windows 2000 don't start automatic :(

Why Oracle 8.1.7 don't start automatic on windows 2000 :(
Services
Oracleora3Agent
Oracleora3DataGatherer
Oracleora3TNSListener
OracleServiceORA3
are started autamatic. (ora3 is SID)
if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

I've got the same problem.
However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
i.e NET START OracleServiceXXX
Hope this helps.

Downloaded songs don't start at the beginning of the song, why?

the songs i bought from itunes don't start at the beginning of the song, it's just the preview clip.

Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

Java Apps don't start automaticaly after system restart

Hi,
Since a few days ago when restarting Java application servers of SAP
Portal, the applications deployed don't start for itselfs.
When starting the instance, the memory stops to increase at 500mb. The
only way to start the applications is by the manual way in:
Server -> Services -> Deploy -> Runtime -> Application -> Start
Application.
After starting the applications manually the instance starts fine.
I already increased some values in global configuration:
From:
InitialThreadCount = 40
MaxThreadCount = 150
MinThreadCount = 40
To:
InitialThreadCount = 80
MaxThreadCount = 200
MinThreadCount = 80
After the restart the applications are not starting automaticaly yet.
I have 4 instances. The first two instances are starting fine, but the problem is happening with the other 2 instances.
Is there any reason for this type of behavior?
Thanks for the help
Pedro Nunes

Hello Vyara,
thanks for your reply.
This kind of problem happens since 3 weeks ago and the stack of this system (SP09) remain unchangeble since 07.04.2008.
The strange behavior is that the Server 1 and 2 are starting all the apps fine, but this problem is only happens in server 3 and 4.
Can you help please?
Thanks

9iAS Release 2 (some) components don't start

Component that don't start (Forms, DAS, ...)
In oidmon.log is ...
2002/12/06:12:11:34Failed to fetch Process Table. ORA-12571: TNS:packet writer failure
2002/12/06:12:11:34Error connecting database. 12571
2002/12/06:12:11:34Error : Guardian Process terminated
2002/12/06:12:13:03NLS_LANG set to SLOVENIAN_SLOVENIA.EE8MSWIN1250
2002/12/06:12:13:03Resetting NLS_LANG to SLOVENIAN_SLOVENIA.UTF8
2002/12/06:12:13:03Starting Monitor Process, PID=1260
2002/12/06:12:13:03ORACLE_SID not set, setting to iasdb
2002/12/06:12:13:52[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:13:52[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:13[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:13[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:33[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:33[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:54OIDLDAPD Instance 1 is not running....
2002/12/06:12:14:57OIDLDAPD Instance 1 deleted from registry
2002/12/06:12:14:57Restarting OIDLDAPD Instance 1
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58Updated Retry Count
2002/12/06:12:14:58OIDLDAPD Instance 1 added into registry
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58exit run
Are this errors cause for not starting components, and how can I correct this ?
thanks

I could be wrong but...
1) Is the TNS listener running? (and then a DB instance)
2) Is the default SID (iasdb) correct? You might like to set the sid before you start.
3) I had loads of problems after I accidentally tried starting emctl as root. I changed the ownership of everything back to oracle:dba and then started it as oracle and all was well.
Maybe useful, maybe not?

Tiger finder freaks after starting Classic (OS 9)

eMac running 10.4.4 suddenly is acting strange after starting classic to run Outlook client. Yes, would like to use Entourage but our Exchange server is older than...I digress. Anyway, Tiger runs fine until I start OS 9, then I try to open a folder or the hard drive in the finder and I get the spinning wheel of death. Only way out is force quitting out of the Finder. I rebuilt the person's account, so its not an account corruption issue.
Restarted in Safe Boot, repaired permissions, Zapped the PRAM...
I can't get my arms around this one, help!
eMac 1Ghz, 640MB, 80GB HD Mac OS X (10.4.4)
G4, G3 Mac OS 9.1.x

Anyone? Anyone? Bueller?

Starting Classic often fails

I'm trying to start Classic, but it often gets to about 90% and fails. After about 3-4 tries it finally works. I've tried turning off extensions, etc. but nothing seems to help. Any ideas?
Thanks in advance,
Brian

So you are running OS 10.4.10 on a G4, the glitch launching Classic is intermittent, and it may or may not occur with Extensions off.
What is the version of OS 9? What does it say beneath the appropriate icon in System Preferences > Startup Disk?
Can you successfully boot into OS 9? Always, never or intermittently?
We can't know what you mean by "etc". Have you used System Preferences > Classic > 'Advanced' to rebuild the Classic Desktop? Have you used Disk Utility to "Fix OS 9 Permissions" (in the File menu)?
You can try setting aside (say to your Desktop) four items in the System 9 folder: "Classic", Classic Support", Classic Support UI" and "System Resources". They will be re-created when you next try to launch Classic.

[Solved] Libreoffice 3.6.1.4 don't start

Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)

Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

After upgrading PSE 11 to PSE 12 Editor don't start Organizer do

After downloading and installing PSE 12 (several times) Organizer start, but Editor don't start.
While installing there are no visable error messages.
Cotim

The issue is still there.
I am using Elements 11 until Elements 12 works. (I have to do my job)
I have several times uninstall Elements 12 (incl preferences) and reinstall the programma. (8-9 times)
During downloading and installing I closed the virusscanner and the firewall. No Error messages
Elements 11 is an upgrade of Elements 9 and working OK.
The following logfiles ended with EXIT code: 0-No Error
EO12 AMTLib Support 12.0 12-18-2013.log.gz                         3.976 18-12-2013 04
PSE12 AMTLib Support 12.0 12-18-2013.log.gz                       3.975 18-12-2013 08
PSE12 STI Installer 12.0 12-18-2013.log.gz                              6.355 18-12-2013 10
Is downloading the full system maybe a solution?

K7T ProV1 Don't start(classic)

Similar Messages

Maybe you are looking for