K7T Turbo D-Bracket USB connector?

Please I need some help. 
I have a K7T Turbo Limited Edition Motherboard 6330 V.30 .  It came with the P2P USB Bracket and the D-Bracket.
I can only find one place on the motherboard for a USB connector, how am I supposed to install these?  Is there a mismarked motherboard pinout?
My Motherboard manual says it has a connectors for 6 USB ports. 
I have 2 near the PS2 connectors built in, the D-Bracket has 2, the P2P has 2 which = 6, but I can't find a place to plug the brackets into the motherboard.   
I would appreciate any help in the matter at all
Neoghost

Hi
According to the MSI site for the K7T Turbo Limited Edition, your motherboard only supports 4 USB connections.
You can use a USB PCI card to obtain more if needed.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=25

Similar Messages

  • K7T Turbo-R Limited Edition and USB

    After doing whatever research I could in these forums, I really couldn't find solid answer so I'm posting my questions.
    I have recently ordered a new case for my K7T Turbo-R Limited Edition (it's the red one) which has additional USB connections in the front of the case.
    Am I going to be able to connect the board to the case so I can use those USB slots?

    Hi Gregthos,
    I remember there was something with these connections - I think they will only work with the bracket and for the PC2PC connection ...
    There is at least 1 thread on this in the forum ... here
    Hans

  • Usb & msi k7t turbo

    hello i've problem with instaling usb controler on my msi k7t turbo limited edition and win Xp .
    system recognize usb controler but there is a message -- " There is a failure during instaling usb controler , abnormal data "
    what should I do ?

    Hi,
    I have not seen this problem before....
    Did you install extra USB controllers or are we talking about the on-board controllers???

  • K7T Turbo limited - USB not working

    I have a K7T turbo limited edition motherboard. The rear usb ports work fine.  There are two USB ports on the front which do not work.  appreciate any ideas on how to clear up this problem.

    https://forum-en.msi.com/index.php?threadid=52338&sid=
    one to many wire is usual problem

  • K7T Turbo LE - Windows XP Pro SP-1 is not detecting my CD ROM drive I used to install XP Pro !!!!!!!

    This is an XP driver issue that I'm not sure how to resolve.
    This is a brand new K7T Turbo (MS-6330) Limited Edition motherboard (red-colored board, not green), Ver. 3 (no RAID controller on-board)
    PSU is 400w (I tried another PSU, same issue)
    Athlon 850MHz socket-A
    CD-ROM drive - Yamaha CDR2100E 16x10x40  UDMA-1
    The BIOS is 3.6, updated prior to Windows XP's installation
    The VIA 4-in-1 drivers were updated with the latest available on MSI's website for the 6330
    2 hard drives installed on the primary controller - one set to master, one set to slave
    CD-ROM drive is the only device on the secondary controller, set to master with no slave, and is plugged-into the end IDE cable connector
    The board detects the cd drive, and I even installed Windows XP Pro WITH this cd-rom drive, installed as currently configured, which is what pisses me off.  I've installed XP four times today, try different things between installs, and nothing.  The drive works FINE outside of XP, but as soon as XP starts, the drive disappears and XP doesn't even detect it.  Also, while booting up, the start screen will lock up (activity bar freezes and hard drive activity stops) for about ten seconds (but everything's hooked-up right... I'm not a PC rookie!).
    HELP!  Please oh please help!!!!  I'm getting aggravated!
    Thanks!

    you're posting this all over the place aren't you??
    have you tried flashing the yamaha firmware? remember the link i gave you?
    have you tried a windows repair using the method i gave you?
    http://www.msi.com.tw/program/e_service/forum/index.php?threadid=31741&sid=
    i never liked yamaha dirt bikes...

  • K7T Turbo LE IDE problem?

    Hi,
    I'm stuck here. I have an AMD Athlon 1400/266 (T-bird) running on the K7T Turbo Limited Edition mainboard, BIOS version 3.6. 512 MB PC133 SDRAM. 2 Maxtor HD's. My system is about 2 years old.
    In the last 2 months, the following has started to happen:
    Occasionally (say, 1 out of 10 attempts), my PC won't boot (DISK_BOOT_FAILURE). I know this in advance because when it happens, it gives two short beeps when powered up (can't find the meaning of them :O ).
    The problem is: sometimes the Primary Master is gone ("none"), but other times, it's the primary slave. In that case, the PC will boot but behaves very strange once WinXP is started. And sometimes, both master and slave show up as "None"  ?(
    The optical drives on IDE2 are detected at all times.
    D-Bracket is all green. I reseated the IDE cable with no result. Tested both the Maxtor HD's, no errors.
    So, what now? Any ideas?
    Thanks,
    Dennis

    Just came back from my holiday so I ran some more tests.
    First, I checked the drives one at a time using the PowerMax utility. 81GB slave is fine (tested alone).
    40GB master is fine 9 out of 10, 10th time it says "Please Perform extended diagnostics" and then it reports "Congratulations, your drive passed all tests!"
    A little weird....
    Looks like failing drive, but could this also be IDE controller communication failure?
    I also tried replacing the 80pin IDE cable with a 40pin cable which is brand new. This makes no difference other than slower system speed.
    Maxtor website has no info, MSI same story.
    Now what???  ;(

  • K7T Turbo LE and problems with IRQ routing Win98SE

    When I boot my machine (AMD 1600+ on an MSI K7T Turbo Limited Edition), the BIOS reports me the following:
    SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
    Startech NIC in slot 2: IRQ 11
    D-Link DFE-538 TX in slot 3: IRQ 10
    Echo Mia soundcard in slot 4: IRQ 5
    Onboard Promise ATA100 controller: IRQ 11
    2x USB controllers Via 3038: IRQ 3 for each one
    IDE controllers: IRQ 14 and 15
    In "Settings - Control Panel - System - Device Manager", there's one big difference:
    The two USB controllers (Via 3038 PCI to USB) are on IRQ 10!!! The only way for Via USB controllers to be on their real good one IRQ (3) is to completely disable "IRQ Steering" in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus".
    To resolve this, I tried:
    - different Via 4 in 1 (4.32, 4.35, 4.36): no changes
    - Via IRQ miniport uninstalled: no changes
    - Enable "PnP OS" and "ACPI" in the BIOS: no changes
    - Tried all the combinations in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus - IRQ Steering" (except disabling IRQ Steering because like I said, it resolves the bug. Though, I want IRQ Steering to be enabled AND the bug resolved).
    So, if anyone have a clue, it will be really appreciated.
    Thanks in advance.
    gugusse
    - MSI K7T Turbo Limited Edition
    - Athlon XP 1600+ (1.4ghz)
    - Win 98SE with all the patches
    - NIC Startech (Realtek 8139 chip) in PCI 2 (IRQ 11)
    - NIC D-Link DFE-538 Tx in PCI 3 (IRQ 10)
    - Echo Mia in PCI 4 (IRQ 5)
    - SiS 6326 AGP card (doesn't take an IRQ!)
    - HDD Quantum Fireball Lct-10 20 GB 5400 rpm on IDE 1
    - HDD Maxtor 6 L080J4 80 GB 7200 rpm on second IDE of the Promise controller (running in standard IDE mode, not RAID)
    - Plextor 8/4/32 (master) and CD-ROM 56x Affrey (slave) on IDE 2
    - 4 in 1 v.4.35

    Quote
    SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
    Just thought that I would let you know that I have the same troubles with no IRQ being assigned by the BIOS and due to this I am having troubles getting a DUAL monitor set up running!
    --David

  • K7T Turbo limited edition can't support Windows XP!!!!

    i'm user of K7T Turbo Limited Edition mainboard, i treid to upgrade my OS to Windows XP currently and i found that the installation aborted abnormaly when it reach windows is restarting phase, and my PC will just hang without giving any response, i'm wondering my mianboard can't support Windows XP. Another prob i face is my hp deskject 630c printer couldn't supported by the mainboard also, i had tested on other PC and it works truly well. Anyone facing similar situation ?? can i solve my prob with update the latest BIOS

    Hi!
    There is no reason why your mobo (or printer for that matter, XP-drivers, both for parallel and USB interface can be downloaded from the HP site) would NOT support Windows XP.
    It could be, however,  that you need to update BIOS first. If you have a BIOS version prior to 3.0, you will have to update.
    Regards,
    Hans

  • K7T TURBO and GeForce 4600

    Hello all,
    I am having trouble trying to put together my K7T TURBO MS 6330 with an ASUS V8460 (Ti 4600 Ultra Deluxe).  
    Specifically, I just replaced my old Oxygen card with the GeForce 4  one, and as soon as I installed the SmartDoctor 2 utility, I got the message (in red flashing text) :
    " Your VGA card voltage 1.5 is out of safe bound. Motherboard doesn't supply with reliable
    1.5 voltage.
     Please contact with motherboard manufacturer for help."
    (I've allready sent an email to MSI support, and still waiting.)
    Furthermore, I've been experiencing sudden crashes (i.e. when I am using 3d applications) followed by a blue screen reporting an error message about a file that seems to belong to SmartDoctor folder.
    I've read that ASUS vga cards are rather demanding as for power and voltage. Anyway, I'd like to ask everyone in the forum, if there is a safe and reliable way for the
    K7T TURBO and the Ti 4600 to work together, perhaps with a motherboard BIOS update (I am still using ver. 2.7 since there was no need to flash it till now) or something...or maybe it would be a better thing to do, to install on my machine an MSI 4200 8x AGP card that is available, instead... or ... go back to my oxygen thingie... :(
    My PSU is 420 Watt, and my cpu is Athlon 1200 with 768 mb ram.
    Well, I just hope someone could help...
    Thanks in advance

    Hi all,
    I forced my AGP bus to x2 a couple of minutes ago, and now I got a message from Smart(...) Doctor that my voltage is out of 3.3 V bound etc.. and a blue screen reporting UNEXPECTED KERNEL MODE TRAP (?).So, the situation is not improved...
    I also put my sound card to another PCI slot, but I still had no luck at all. The thing is that unfortunately I have IRQ 11 being used by 6(!) devices: my gfx card, my scsi controller, my soundblaster, 2 VIA USB controllers and Microsoft ACPI Compliant System.Not very nice indeed.
    I wonder if updating the motherboard's BIOS would do any good; btw, mine is ver.2.7, while the latest is 3.6 (!), but since I was ok till now, why bother flash it?
    For the time being, I am not able to run 3D Mark 2k1 beyond benchmark #3, since it stops, leaving me on the desktop, while whenever I run Maya, winamp 3 and ACDSEE 4 simultaneously,after a while I get the blue screen of death, saying something about anvioctl.sys file - a SmartDoctor file hiding into system32/drivers.  ?(

  • Problem with front panel USB connector

    Motherboard: MS-6750
    I have a problem with my front panel USB connector JUSB2 not working.
    I have checked the connection to be sure that it is oriented correctly.
    I also made sure that it was enabled in the BIOS.
    Still no luck.  There is not any voltage on this either.
    I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
    Any ideas on what this is and how I might trouble shoot the USB connector?

    Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard  and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps  Dok

  • Lock Ups !!!!!!! "k7t turbo limited edition"

    1.3g duron
    k7t turbo Lim.Edition
    256mb 133mhz sdram
    40gig seagate , 10gig samsung
    Liteon 16x10x40x / 52x cdrom
    7200 Radeon Pci 32mb
    REalTek Ethernet
    Welp fixed other problem by installing XP with cpu cache off and then turned back on when finished. Everything seemed to work fine all up to the point when I tried to start playing games. First game "quake 3" works fine aslong as im constantly moving intill I have to leave it on untouched for a min or so. Then it locks up or freezes and all I see is a black screen. In  starcraft it will let me play for a good 2 minutes and then the screen freezes. Last game  I tried was black and white that let me play for a good 4 mins then everytime i tried again the time it took to lock up got shorter and shorter. Ive installed new bios and via chipset drivers and still nothing.
    Anybody got any other ideas I can try ????????????

    well I didnt think I needed to since I was using a PCI card. I guess Ill go ahead and try. As for my power source im going to list everything it says cause i dont know a thing about them.
    model: atx-350-12v
    max output is 350w
    input:        output:
    115vac        +12v   15a       max
    8a max        +5v    35a       max
    60hz      
    230vac        +3.3v  20a       max
    4a max        -5v    0.5a      max
    50 hz         -12v   0.5a      max
    hope that helps

  • Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

    hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

    If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
    Activate AirPrint in Mac OS X;
    http://netputing.com/airprintactivator/
    Add AirPrint to Windows;
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

  • HELP using AMD 1800+ (Thoroughbred) in K7T Turbo Ltd Ed

    Sigh. I correctly remembered that the XP1800 was the fastest that the K7T Turbo Limited Edition could handle, so I picked one up.
    Got it home, and determined that I got a Thoroughbred (model 8) rather than a Palomino (model 6) and the compatibility chart say "No"
    I have been looking at the specs for the two models, and can't see why it shouldn't work. Has anyone got any further information?
    Thanks so much!
    Paul Birnbaum

    But I had seen that page previously, and except for the 1.75/1.60 Core Voltage values (and the K7T Ltd Ed supports both those values) there seems to be no difference.
    So there's still no definitive answer as to why the board would support the Palomino and not the T-Bred (which looks way like a typo for the old T-Bird!)
    I did note that the BIOS values available for CPU Vio are 3.3v and 3.45v...so possibly that's it. I can't find a CPU Vio spec for either chip. Or possibly, it's just that the board doesn't recognize the CPUID.
    Anyway, thanks...

  • K7T Turbo-R (6330 v3) & Athlon XP 1800 Problem

    My current system is a K7T Turbo-R that I've had for a couple of years now.  During this time, I've used an Athlon T-Bird 1.33GHz processor without any issues - very stable (I can probably count on one hand the number of lock-ups).  The power supply is a 300W Antec.
    I decided to upgrade the CPU.  I checked the CPU support status and found that the highest I could use with this board is an Athlon XP 1800+ Palomino, which is what I purchased (code on the core is AX1800DMT3C).
    After removing the TBird and installing the XP (along with a new CPU cooler), the system won't post at all, and all 4 LEDs are red.   :O  
    I reinstalled the TBird (along with the same new cooler) and all is fine again.  Figuring I had simply received a bum CPU, I tested the same XP 1800 on another system (a Soltek PurpleRay) and found that the CPU was fine.
    Note: The BIOS is at v3.6 and J17 is open.
    Any ideas would be appreciated.

    This reply is for Mustang (a bit late maybe  )
    The description of your problem indicates one or more failing capacitors on your motherboard. Check out this link for some example pictures of what that looks like:
    http://www.careyholzman.com/caps/thumbnails.html
    The reason i'm thinking about this is that i replaced 6 dead capacitors on my own K7T turbo last weekend. 4 of the 4700uF/6.3V ones had died (around the CPU socket), and both of the 2700uF/6.3V ones near the AGP slot. My system was showing the EXACT same symptom you are having. It would not boot after powering on with the power button, but a reset helped (this is at 1000 MHz, at 1333 MHz resetting did not help). This also explains why your old processor works fine, but the new one doesnt. Your PSU/power regulator combo is able to provide a stable enough voltage to the old processor with it's low power consumption. But with the new more power-hungy processor those big capacitors (which help stabilizing the voltage supplied to the processor) are missed :/
    Apparently a Taiwanese capacitor producer supplied a large number of faulty capacitors to motherboard producers like msi,asus, abit, etc. More info in here: (and lots of other sites too)
    http://www.timcousins.com.au/capacitorfailures.htm
    Hope this is indeed your problem, and that you can fix it

  • K7T Turbo & CPU upgrade

    Oops, is this the right spot for this post ? Anyway...
    I have a MSI K7T Turbo Version 3.0 Limited Edition motherboard,without RAID.
    (yes I know it's old)
    The AMD Athlon processor (1.1Ghz) got fried and I want to replace it. The board is fantasic and I want to upgrade the processor. What AMD processors can I use in this board ?
    The manual says 1.3Ghz maximum. I have seen on websites it will take up to 1.8Ghz. Is this true ?
    I have also seen it will only take Athlon, or Palamino.
    Someone else told me it will take the 1.33 GHz Thoroughbred processor , or some low Athlon XPs like XP1800+.... Help !
    Can anyone please clarify for me ?
    I want to put the maximum size processor in that will run with stability....
    ps. I have upgraded my cooling system !
    dakiwi  

    Hi,
    And welcome to the forum  
    You have succeeded in finding the fount of all MSI knowledge - This forum  (well some of it anyway)  
    Go here:
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=25&kind=1
    Hope it helps you!
    Axel  

Maybe you are looking for