K7T Turbo R Limited Edition and crackleing sound

I started getting a crackling sound recently. I never had that problem before. The only thing I can think of that I have done that may have started it was to update the bios and the via chipset drivers. I tried to reinstall the 442 drivers (only the pci part) but no change. I reinstalled the 443.
I read in other threads that it could be either a latency problem. Also moving the sblive sound card could do fix the sound. I don’t seem to have any latency timing adjustments in the bios and I tried moving the sound card to number 3 and the number 6 slot with no luck. I have tried a couple of 686 bug fixes and they didn’t work. But I have also read where that wouldn’t work so I removed them.
Is there anything that might work?
Win XP
AMD 1800+
Gforce 4 mx 440
512 meg 133 ram
60 gig HD Maxtor 7200
40 gig HD Maxtor 7200
Promise Ultra 100 controller (Couldn’t get the onboard raid controller to work.)
SbLive 5.1
Actiontec 56k PCI call waiting modem
Asus 50 cd
Mitsumi 16 speed cdrw
Iomega zip 100

install "PCI Latency" patch for VIA chipsets
Read my post to get it:
http://www.msi.com.tw/program/service/forum/index.php?threadid=14669&boardid=13&page=1#1
Mário Silva

Similar Messages

K7T Turbo-R Limited Edition and USB

After doing whatever research I could in these forums, I really couldn't find solid answer so I'm posting my questions.
I have recently ordered a new case for my K7T Turbo-R Limited Edition (it's the red one) which has additional USB connections in the front of the case.
Am I going to be able to connect the board to the case so I can use those USB slots?

Hi Gregthos,
I remember there was something with these connections - I think they will only work with the bracket and for the PC2PC connection ...
There is at least 1 thread on this in the forum ... here
Hans

K7T Turbo-R Limited Edition

Ok fellas, here's my question.
I'll try to include as much info as possible here.
I have the K7T Turbo-R Limited Edition version 3.0A (at least that's what the users manual says). It's a Red Motherboard and has 2 IDE Controllers. I simply want to know what is the fastest processor I am able to run in this board? Also, I was looking at the BIOS updates and noticed that some have footnotes regarding the Turbo2. So what is the latest BIOS Update that I would use for this particular board? Please pardon my ignorance here. My hopes here are that these are softball questions for you guys.

Thanks a bunch BAS!
Would this be the processor you're talking about? http://store.yahoo.com/directron/xp153.html
I found this online. Also, what would be the BIOS update I would use? I was looking at several posts last night and saw that the Power Supply is going to be a very important issue here. The case I have purchased comes with a 320W PS but I noticed when I was reading that 320W doesn't always mean 320W ?( . I appreciate all the help you guys offer here! Thanks again BAS! :P

K7T Turbo-R Limited Edition W/Raid

Two questions,
first how do you tell if your XP 1800+ is a palomino? I purchased one but all it says is AMD Athlon XP 1800+ on the factory sticker.
Second when I use this processor with my K7T Turbo-R Limited W/Raid it will boot up fine, displays the correct processor speed (shows XP 1800+ in post) but the pc will at random times out of the blue just re-boot. I have a 400 watt psu AMD approved. and my memory is good. I've done all the bios updates also. Is it possible that this is an unsupported cpu?

http://www.amdboard.com/amdid.html
http://www.overclockers.com/tips00173/

MSI K7T Turbo-R Limited Edition

Is this board no longer getting supported for new BIOS updates??
Thanks to anyone who knows this.

Hi
I have Tv-Tuner, internal modem, LAN, second Sound Card on PCI and Gforce on AGP. Windows XP share IRQs and computer crashes. I hope, that with APIC will be less sharing then now. Yes, I know, that phisicaly there are only 4 IRQ signals on PCI A,B,C,D. But I thing that APIC should works better for me.
P.S. I tried all that stuff - change to "Standard PC" (shut down won't complete); manual assign IRQs in BIOS - nothing happens, cause WinXp override BIOS settings, etc. etc. etc.
P.S.S. I return original BIOS, cause BIOS for 7ZXE didn't know what clock ICs and voltage ICs are on my board

K7T Turbo-R Limited Edition & XP

I have just added a new harddrive to my system to replace a smaller one. The NEW hard drive shows up as drive F and not drive D like it should.
The new drive is the master and my other drive is a slave set up correctly on IDE channel 1. I also have a CD-RW and a CD-ROM on my IDE channel 2.
When I had 2000 and 98SE, and adding a new device, if it was on IDE channel 1 it was drive C & D and IDE channel 2 was E & F.
Also my A drive is now showing as A AND B when reading a diskette?????
Is this a know issue with XP this board and VIA chipset drivers???
Any help would be appreciated! I am NEW to XP ONLY.
Thanks!

OK thanks Bas and Denis.
Will I need to reload everything since the drive will not longer be F in the reg. or will it know that it's now C???

Help with Audigy 2 Zs and crackling sound ..

For the past 5 months or so ( not long after I got the product ) I have been getting this periodic issue with the sound ...
I'll start to notice a popping and crackling sound coming from the left channel when loud sounds issue from the game ( multiple games ). After a while I figured ou ttha tI could :
a: Reset all my settings to Default , Then reconfigure my surround
or
b: Reinstall and/or patchthe current driver set ...
Both seem to fix the issue for some time then it all returns within a month or so .... It's a rela pain to have to keep configuring my Audio settings every month.
My system specs are
Asus A7N8X DLX Rev. 02
AMD 3000+
Gig Corsair XMS
BFG 6800GT 256
Audigy 2 ZS
Raptor 74 Gig
and some Altec Landsing Speakers ( I forgot the model number )
Any idea what could be causing this ?
Thanks in advance.

I got the fix for you twellons. Just go in the audio control panel and mute the midi/synth in the panel and you will have the fix. My system specs are close toy yours amd 2800xp, nforce 2 a7n8x dlx ver .04 and a original audigy card. Now creative has to address this issue in new drivers. Also download the demo of contract jack and when you load the game and the game menus comes up, scroll through the options in that menu like new game, load game quickly and you will here that popping noise in only the left speaker. and when you do that fix that i mentioned above, no more popping . So try that out and please get back to me and tell me if it worked or not. That issue was tough to figure out.
P.S. You owe me

I have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? than

i have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? thanks

It is not compatible with Windows 7. Advice could include telling you to purchase the latest version. The other option would be to buy an old computer that is capable of running it.

Satellite M300: Low sound microphone levels and crackle sound using Skype

Brand new machine, and tried to use Skype.
Low sound levels and a crackle through it.
Tried it in sound recorder, and low sound, but no crackle.
Can not get the sound levels up.
Driver for Conexant HD SmartAudio 221 shows as up to date (4.36.7.0)
Any assistance would be appreciated.

Do you use Toshiba factory settings? YES
Which OS do you use? VISTA
Do you have the same problem using headset? NO
I have narrowed it down a little more. It is only when I am connected to my wireless network. I can have Wi-Fi enabled, and connected to the internet via a mobile internet connection and there are no issues.
When I am connected via the router, I have this issue. You could say it is the router, however I have various other machines connected to the same router, without issue.
So, to clarify.
WiFi on - not connected to internet via router, however connect by other means - All ok
WiFi on - connected to the internet via router, issue.
Router is Thomson SpeedTouch 570

FCP 5.0 Multicam editing and main sound

I have 3 angles shots. How do I leave a main sound from camera 1 in the time line when when I do multicam editing?
Do I first do only video cuts and bring the main sound in or it can be done differently?
Thanks.

I didn't feel like going through the manual either on this one --- here's what I do, which is by no means the easiest automatic thing.
After I drag my multiclip to the timeline, I grab the track I want audio from and place it with the multiclip. A couple locks & unlocks, a couple of deletes, and I've got the multiclip video with the audio from the track I want audio from.
It's not the automatic thing, but I generally am working with 2+ hour long multiclips, and only have to go through this once per project.

Usb & msi k7t turbo

hello i've problem with instaling usb controler on my msi k7t turbo limited edition and win Xp .
system recognize usb controler but there is a message -- " There is a failure during instaling usb controler , abnormal data "
what should I do ?

Hi,
I have not seen this problem before....
Did you install extra USB controllers or are we talking about the on-board controllers???

XFi crackling sound solve

Hi Guys,
I had the same crackling sounds with my card. I bought the Cinema edition and there comes a xtreme music with this package. When i installed the drivers, my system was dam slow. the sound was crap and i could forget to play a game. Then i switched to win XP 64 and downloaded the driver for this system, gess what? The crackling stopt, games run fast and the sound is just beautiful. So switched back to win XP 32 bit. with a my new clean system i downloaded the update. and then i installed ONLY the update and my xfi runs as good under win xp (32) as it has under 64 bit. Then you can install the additional software that comes with your cd. All is running fine. But NEVER install the driver that comes with the cd. I installed the old driver and my system again (after the update). My system was slow and i had the crap sound again.
The only thing you lose is the IR Remote Control, somehow that thing doesn't work. Because of that i installed the old driver again (as i mentioned above), the remote works then, but well you know slow system and crackling sound.
So if anybody knows what the file is, i must install for the remote to work, plz tell me.
PS: when this solution was already posted in the 04+ page thread regarding this issue, i apologise. But could anyone tell me a solution with the remote issue anyway

Here's a bit of info that crackle-sufferers might find useful. There's a bit of a story behind it, but stay with me, I think it will be worth your while.
I just tried installing an X-Fi Platinum, and had to give up. The card was simply not detected. No matter what, system would not detect, drivers would not install. I tried everything. After too many hours of effort and a long call to tech support, I gave up and tried to revert to my previous Audigy 2 card.
Guess what? MASSIVE crackling!
I freaked. This system had been working perfectly for months. I tried all the solutions that have been posted... moving the card, pulling all other cards, etc. Finally, I scrubbed the system... ran the driver remover, deleted every line in the registry with "X-Fi," "Audigy" or "Creative" in it, deleted the Creative folder in Program Files, etc., etc. Of course, then the Audigy card wouldn't recognize! Much more swearing, fritzing... but bottom line, it finally installed.
Guess what? NO MORE CRACKLE!
I knew the X-Fi software had not uninstalled fully, which was my first clue. Now, back on pure Audigy drivers (the latest version), all is well. What does that say to you? To me, it puts the blame for the crackling squarely on the X-Fi drivers. Oh, sure, there are probably other contributing factors (since not every system exhibits the problem), but if having even a remnant of those cursed X-Fi drivers installed is enough to produce hideous crackling on a previously faultless Audigy 2, what other conclusion can you draw?
The logic seems ironclad to me. The good news: Creative COULD fix the problem, if it's just in the drivers. That stuff about the cards not recognizing... now THAT'S just evil. This is 2006 (isn't it's). That kind of annoyance went out with Win95.
-fungo-

K7T Turbo(ms6330)ver3

i see in msi webside that this mainboard support xp1800.in cpu support they say the same.but in the bios support (bios ver3)they say that onely k7t turbo 2 support xp1800 and above.is there somthing wrong here?http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=100&MODEL=MS-6330%20Ver3.0 http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=100%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20 http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=100&NAME=MS-6330%20Ver3.0%20%20%20%20%20&NAME=MS-6330%20Ver3.0

Hi ernyh,
If you look around on the forum, you will find a considerable number of "success stories" and I believe every single one )
However, this does not make the limitation to the 1800+ a myth. The limitation has been set by MSI and is therefore a reality - there are the technical reasons in relation to the powerlines on the board (just look around in this forum), but there are also "economical reasons" like the fact that the gain in performance you (or xroyal, for that matter) will have will be a mere 10-20% in theory - meaning that part of it will be visable in benchmarks. In practice it will be hardly noticeable in comparison to running at stock speed for most games and applications.
Also, the people who will ask the question are almost invariably newbies and giving them advice that will cost them their warranty if something does go wrong, is not good advice - at least in my book )
Furthermore, there is no question about it that running the system out of specs will have a negative effect on life span - even if there is adequate cooling of the cpu - because, for instance, there will also be stress on other components.
So, as long as the limitation is there "officially" I am of the opinion that the answer to the question must continue to be "1800+". Nevertheless, I hope that you will not run out of luck )
Hans

K7T Turbo Limited Edition - AC97 Sound?!

So, the manual tells me to just pop the CD in after the 4 in 1 driver installation and the Sound Setup should run itself, I should sit back and relax the manuel sez. I do that after the initial reboot from the 4in1 installation. Well, the sound doesnt install itself. Also, the setup menu doesnt even have a install on-board sound option or anything. I started rumaging around on the CD and found the sound files. The question if Which ONE am I supposed to install???!!! I tried both the ones under the VIA folder. They Both tell me that my AC97 is not enabled in the Bios. BUT, I've Enabled the frikkin thing like a thousand times but the setup programs keep telling me that I need to enable the AC97 in the BIOS before they can install.
ADVANCED CHIPSET FEATURES has the "Onchip Sound" : Auto
INTERGRATED PERIPHERALS has the "Onboard Legacy Audio" : Enabled
"Sound Blaster" : Enabled
"MPU-401" : Enabled
So, the audio setup files under the Folders D:/Sound/VIA/VT8233 or MVP4
Keep telling me that I the sound needs to be enabled in BIOS what the heck am I doing wrong??!!
Thanks ahead of time to anyone who can help. ?(

OHHHHHHHHHHHHH....... (SMACKS HIS FOREHEAD) I figured that there was something wrong with the Sound Blaster but I though there was some kind of resource conflict. At least the device manager was telling me there was a Error Code 16 on the Sound Blaster and the thing tells me that I need to manually set resources. But for some reason it wouldn't let me do that either. So I got rid of the Sound Blaster from the Device manager. I am running Win 98 SE.
However the drivers I found on the CD that came with the MoBo are still not installing. It sez that the AC97 sound is not enabled from BIos still and that I need to enable it. I looked all over the manual for the sound jumpers but there is no indication or anything about sound jumpers!!! If you could be a little more specific and tell me where the jumper is??!
Thanks alot for your help.

K7T Turbo Limited Edition HD Max

I currently am running this setup:
K7T Turbo Limited Edition Motherboard, AMD Athlon XP 1800+ 1.53 Ghz, 384MB PC-133, 27.2 GB WD, 40GB Maxtor, Gigabyte 5900XT, MSI 52x Combo, Linksys 10/100 NIC, Sound Blaster Live Audigy2 Limited Edition
I have been over and through the website and I noticed that with the new BIOS which (3.6) the Turbo2 (which I don't have) can run up to a 160GB Hard drive. I was wondering what the max is for the normal turbo. My WD 27.2 GB drive is going sour and I want to upgrade to a Seagate 200GB HD, since I plan to use it when I upgrade in January. Any ideas whether it will work without out major headaches?

Quote
Originally posted by osnavi
As said by Rogue_Wulff, you should select the 120 GB HDD as the 160 Gb. could have same problems as the 200 Gb. ( More than 136 Gb)
Alright, thanks.

K7T Turbo R Limited Edition and crackleing sound

Similar Messages

Maybe you are looking for