K7T Turbo-R Limited Edition and USB

After doing whatever research I could in these forums, I really couldn't find solid answer so I'm posting my questions.
I have recently ordered a new case for my K7T Turbo-R Limited Edition (it's the red one) which has additional USB connections in the front of the case.
Am I going to be able to connect the board to the case so I can use those USB slots?

Hi Gregthos,
I remember there was something with these connections - I think they will only work with the bracket and for the PC2PC connection ...
There is at least 1 thread on this in the forum ... here
Hans

Similar Messages

  • K7T Turbo R Limited Edition and crackleing sound

    I started getting a crackling sound recently. I never had that problem before. The only thing I can think of that I have done that may have started it was to update the bios and the via chipset drivers. I tried to reinstall the 442 drivers (only the pci part) but no change. I reinstalled the 443.
    I read in other threads that it could be either a latency problem. Also moving the sblive sound card could do fix the sound. I don’t seem to have any latency timing adjustments in the bios and I tried moving the sound card to number 3 and the number 6 slot with no luck. I have tried a couple of 686 bug fixes and they didn’t work. But I have also read where that wouldn’t work so I removed them.
    Is there anything that might work?
    Win XP
    AMD 1800+
    Gforce 4 mx 440
    512 meg 133 ram
    60 gig HD Maxtor 7200
    40 gig HD Maxtor 7200
    Promise Ultra 100 controller (Couldn’t get the onboard raid controller to work.)
    SbLive  5.1
    Actiontec 56k PCI call waiting modem
    Asus 50 cd
    Mitsumi 16 speed cdrw
    Iomega zip 100

    install "PCI Latency" patch for VIA chipsets
    Read my post to get it:
    http://www.msi.com.tw/program/service/forum/index.php?threadid=14669&boardid=13&page=1#1
    Mário Silva

  • K7T Turbo-R Limited Edition

    Ok fellas, here's my question.
    I'll try to include as much info as possible here.
    I have the K7T Turbo-R Limited Edition version 3.0A (at least that's what the users manual says). It's a  Red Motherboard  and has 2 IDE Controllers. I simply want to know what is the fastest processor I am able to run in this board? Also, I was looking at the BIOS updates and noticed that some have footnotes regarding the Turbo2. So what is the latest BIOS Update that I would use for this particular board? Please pardon my ignorance here. My hopes here are that these are softball questions for you guys.

    Thanks a bunch BAS!
    Would this be the processor you're talking about? http://store.yahoo.com/directron/xp153.html
    I found this online. Also, what would be the BIOS update I would use? I was looking at several posts last night and saw that the Power Supply is going to be a very important issue here. The case I have purchased comes with a 320W PS but I noticed when I was reading that 320W doesn't always mean 320W  ?( .  I appreciate all the help you guys offer here! Thanks again BAS!  :P

  • K7T Turbo-R Limited Edition W/Raid

    Two questions,
    first how do you tell if your XP 1800+ is a palomino? I purchased one but all it says is AMD Athlon XP 1800+ on the factory sticker.
    Second when I use this processor with my K7T Turbo-R Limited W/Raid it will boot up fine, displays the correct processor speed (shows XP 1800+ in post) but the pc will at random times out of the blue just re-boot. I have a 400 watt psu AMD approved.  and my memory is good. I've done all the bios updates also. Is it possible that this is an unsupported cpu?

    http://www.amdboard.com/amdid.html
    http://www.overclockers.com/tips00173/

  • MSI K7T Turbo-R Limited Edition

    Is this board no longer getting supported for new BIOS updates??
    Thanks to anyone who knows this.

    Hi
    I have Tv-Tuner, internal modem, LAN, second Sound Card on PCI and Gforce on AGP. Windows XP share IRQs and computer crashes. I hope, that with APIC will be less sharing then now. Yes, I know, that phisicaly there are only 4 IRQ signals on PCI A,B,C,D. But I thing that APIC should works better for me.
    P.S. I tried all that stuff - change to "Standard PC" (shut down won't complete); manual assign IRQs in BIOS - nothing happens, cause WinXp override BIOS settings, etc. etc. etc.
    P.S.S. I return original BIOS, cause BIOS for 7ZXE didn't know what clock ICs and voltage ICs are on my board

  • K7T Turbo-R Limited Edition & XP

    I have just added a new harddrive to my system to replace a smaller one. The NEW hard drive shows up as drive F and not drive D like it should.
    The new drive is the master and my other drive is a slave set up correctly on IDE channel 1. I also have a CD-RW and a CD-ROM on my IDE channel 2.
    When I had 2000 and 98SE, and adding a new device, if it was on IDE channel 1 it was drive C & D and IDE channel 2 was E & F.
    Also my A drive is now showing as A AND B when reading a diskette?????
    Is this a know issue with XP this board and VIA chipset drivers???
    Any help would be appreciated! I am NEW to XP ONLY.
    Thanks!

    OK thanks Bas and Denis.
    Will I need to reload everything since the drive will not longer be F in the reg. or will it know that it's now C???

  • I have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? than

    i have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? thanks

    It is not compatible with Windows 7.  Advice could include telling you to purchase the latest version.  The other option would be to buy an old computer that is capable of running it.

  • Usb & msi k7t turbo

    hello i've problem with instaling usb controler on my msi k7t turbo limited edition and win Xp .
    system recognize usb controler but there is a message -- " There is a failure during instaling usb controler , abnormal data "
    what should I do ?

    Hi,
    I have not seen this problem before....
    Did you install extra USB controllers or are we talking about the on-board controllers???

  • K7T Turbo(ms6330)ver3

    i see in msi webside that this mainboard support xp1800.in cpu support they say the same.but in the bios support (bios ver3)they say that onely k7t turbo 2 support xp1800 and above.is there somthing wrong here?http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=100&MODEL=MS-6330%20Ver3.0 http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=100%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20 http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=100&NAME=MS-6330%20Ver3.0%20%20%20%20%20&NAME=MS-6330%20Ver3.0

    Hi ernyh,
    If you look around on the forum, you will find a considerable number of "success stories" and I believe every single one  )
    However, this does not make the limitation to the 1800+ a myth. The limitation has been set by MSI and is therefore a reality - there are the technical reasons in relation to the powerlines on the board (just look around in this forum), but there are also "economical reasons" like the fact that the gain in performance you (or xroyal, for that matter) will have will be a mere 10-20% in theory - meaning that part of it will be visable in benchmarks. In practice it will be hardly noticeable in comparison to running at stock speed for most games and applications.
    Also, the people who will ask the question are almost invariably newbies and giving them advice that will cost them their warranty if something does go wrong, is not good advice - at least in my book  )
    Furthermore, there is no question about it that running the system out of specs will have a negative effect on life span - even if there is adequate cooling of the cpu - because, for instance, there will also be stress on other components.
    So, as long as the limitation is there "officially" I am of the opinion that the answer to the question must continue to be "1800+". Nevertheless, I hope that you will not run out of luck  )
    Hans

  • K7T Turbo limited edition can't support Windows XP!!!!

    i'm user of K7T Turbo Limited Edition mainboard, i treid to upgrade my OS to Windows XP currently and i found that the installation aborted abnormaly when it reach windows is restarting phase, and my PC will just hang without giving any response, i'm wondering my mianboard can't support Windows XP. Another prob i face is my hp deskject 630c printer couldn't supported by the mainboard also, i had tested on other PC and it works truly well. Anyone facing similar situation ?? can i solve my prob with update the latest BIOS

    Hi!
    There is no reason why your mobo (or printer for that matter, XP-drivers, both for parallel and USB interface can be downloaded from the HP site) would NOT support Windows XP.
    It could be, however,  that you need to update BIOS first. If you have a BIOS version prior to 3.0, you will have to update.
    Regards,
    Hans

  • K7T Turbo limited - USB not working

    I have a K7T turbo limited edition motherboard. The rear usb ports work fine.  There are two USB ports on the front which do not work.  appreciate any ideas on how to clear up this problem.

    https://forum-en.msi.com/index.php?threadid=52338&sid=
    one to many wire is usual problem

  • K7T Turbo Limited Ed. and problems :(

    Hallo
    I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controller. CD-ROM and CD-RW were properly detected on the second controller.
    I turn the PC off....waited about 30 seconds and turn it on. And everything was fine again. But in a short time it happened again. But now I heard something strange. I heard that both drives are stopping...slow down wnd stop. After a 1-2 sec. windows XP freezed and PC rebooted again :( And again there was no drives detected on first controller :(
    I checked:
    1. viruses - system is clean. I checked it with NAV2003 (within windows and dos - from bootable disc)
    2. I tried to plug those 2 drives (15 GB Caviar and 15 GB Fujitsu) to the second controler (first was empty).
    I asked some friends about it and one said that it could be power supply (maybe there is some instability or something).
    Someone else told me that it could be a battery on the mobo (I have has this mobo for 2 years).
    Or maybe it is a problem with motherboard? Maybe controller is damged....but...from the other hand when I restar the PC everythin works fine....some time :(
    System: AMD XP1700+ (not overclocked), mobo as I said above, Radeon 8500, CD-ROM and CD-RW (pluged to second controller), Caviar 15 GB and Fujitsu (pluggeg do first controller), Windows XP with SP1.
    I had no problems with that system befere.

    Hi
    I must check the type of that battery...but from the other hand if the battery was the problem it wouldn't keep all BIOS settings. Am I right? But it keeps.
    Power supply is 300W - it is a kind off no-name (I bouhgt it with case 3 months ago and there was no problems befere :( )
    I've already borrowed one - I'll check it later today (after work).

  • PCI 2.1 SLot on K7T Turbo Limited Edition?

    I'm about to get a Firewire Card but I'm not sure whether my MB :   K7T Turbo Limited Edition (MS-6330 v3.X) has a PCI 2.1 slot. I haven't found it in manual either. Can anybody help?
    Thanks
    minurec

    Welcome!
    My Turbo2 manual doesn't specify either, but specs on MSI site for mine shows 32 bit PCI 2.2, usually backward compatible. Your MB is just one very short edition back, and I bet your slots are probably the same and 2.1 compatible. MSI shows yours as 32 bit, but w/o the #version. To my memory the 2.1 standard predates our MBs by a couple of years or more. I think you're safe to go.

  • Getting K7T Turbo limited edition what is the fastest processor it will run

    As the subject sugests my friend is about to give me his motherboard, ram and cpu the motherboard is a K7T Turbo-R (I'm assured this is the limited edition one) but he only has a slow old 1ghz processor on it. I've looked at the bios upgrades and I'm not sure what the fastest chip is that I can fit with the latest bios upgrade as it's written in funny english. It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only) does this mean both chips are only supported on the turbo 2 or just the 2600+. My educated guess tells me that I would be able to fit a 2400+ as this is a 133/266 FSB processor but not the 2600+ as this is 333mhz. Please can someone help me I'm just starting to learn about computers and I don't really know what I'm talking about!

    Hello,
    If you are sure it is the limited edition then
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=25&kind=1
    "It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only)"
    That lines means only the K7T Turbo2 supports the XP2400 and XP2600
    (non 166FSB versions  )
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=24&kind=1
    See they are 2 different boards?

  • K7t turbo limited edition drivers (duron 700)

    Can anyone tell me where to get the drivers for the K7T turbo limited edition?  It has the duron 700 installed.  Do I need to find out what chip set? if so, how? then what else do I need to know and where do I go?
    Thank you,
    Troubled

    If this is your board, here is the drivers for it.

Maybe you are looking for

  • Itunes in Windows XP no longer recognizes my device (ipod nano 2)

    My ipod nano 2 is no longer recognized as a "device" on my Windows XP & in i-tunes. I have downloaded most recent version of i-tunes and of Mozilla Firefox to no avail.  I have used 3 different connection cables between ipod & computer to no avail. 

  • Oracle 10g on RHEL 5.3 - Problem

    Hello. I m new to LINUX and ORACLE. I try to install Oracle 10g on my RHEL 5.3 and it shows the following problem... ./runInstaller Starting Oracle Universal Installer... Checking installer requirements... Checking operating system version: must be r

  • Report -without inner join

    hi, this is report i created in this i used two tables and used inner join to make relation b/t these tables... so my doubt is ..if we r using three diff.. tables without inner join we can do this report ......if u can.. plz can u show me wit example

  • How to stop sound from playing everytime we go to 1st frame ?*

    Hi everyone, my app has 3 frames and a sound playing on background so everytime i go to 1st frame the music play's over himself, is easy to get 5 instances of the music playing at same time. How to stop this behavior ? Music file imported to library.

  • DHCP loadsharing with redundant Guest Anchor Controllers

    Hi I have 2 x Redundant Guest Anchor Controllers (5508) located in 2 separate Data Centres with all the management and guest user VLAN spanned between two. Everything is working fine with the Guest WiFi access except the DHCP functionality as the Con