K7t turbo won't boot with xp1800+

I'm tyring to do an upgrade from my 1.4 tbird to a xp1800+ palomino. I have 2 sticks of pc133 crucial ram and a 300W sparkle psu. I've been running at 133 the entire time i've had the 1.4 cpu.
the bios will detect the 1800+ fine, but the computer always reboots when it gets to the "Starting windows xp" screen
what could be the problem?

Hi
I have also bought a new cpu (XP1800+) for my K7T Turbo and the day before I upgraded the cpu I updated the bios from 3.2 to 3.6
Then I upgraded the cpu, and have a lot of trouble!
The machine stops all kinds of places, it is very hard/tricky to turn it on, some times I need to restart it serveral times.
The led displays (D-LED) comes with different failure from stopping at early chipset initialization to testing vga bios and initializing keyboard controller.
I found that the default VCore is not the 1.750V as required by the XP1800+ and that the motherboard only supports VCore = 1.700V, set this by manual.
Then remember to remove the jumper on the board to work with cpu's at 133FSB.
These things helped me a lot, but my machine was still very unstable.
I have now downgraded my BIOS to ver. 3.2 and testet it for one day, and have not experienced any kind of problem, except that it does not recognize my cpu as a XP1800+ but runs at 1533 MHz
I think, that theres a bug in the BIOS ver. 3.6 for the motherboard! ??
This is also showed by the problems did'nt stop when I changed my cpu back to the old TB1000, and had the same problems as with the XP1800+
So my advise:
- set the VCore manually
- remove the jumper
- downgrade your bios
I have plans to upgrade my bios 0.1 version at a time, until it becomes unstable, and then go 0.1 version back.
Im writing a new thread on this subject to, where I will also write about my experince about the bios upgrades.
Good Luck!
Regards
Ronni

Similar Messages

Biege G3 won't boot with OS 9.2

I purchased a biege G3 MT with OS 8.6 on eBay. Unfortunately, the OS is in French. I upgraded that to OS 9.2 and now it won't boot. No chime and it stops after the first icon during startup. It won't boot with extensions off nor with the CD. I tried resetting pram, etc. without any luck. Loaded it with 8.5 and it works. Took another HD with 10.2 from another biege G3 and it works. It just doesn't like 9.2, but I have 9.2 running in another biege G3. Are there G3 that won't work with 9.2? Please help.
biege g3 Mac OS 9.2.x

Hi elpro,
Here's a bunch of stock responses you'll hear on the G3 forum.
Is the 9.2 CD a universal installer (gold color), or a gray machine-specific CD, and if it is gray, is it the right one for your machine? Apple made gold CDs for general retail to work with all machines, and gray ones that were usually distributed with a machine with the components just for that machine. Unless you have a universal installer CD, the version of OS 9 you are trying to install may not have the right components for your system unless you happen to have one that matches your type of G3. If the 8.5 CD is the right one, and the OS X you say is from an identical machine then that may explain why they boot up but not your OS 9.
If you post your problem on the G3 forum you'll almost be sure to get this question. How old is the battery in this machine? G3s exhibit all kinds of weird and unexpected symptoms when the batteries are weak, and they go through them pretty quickly, especially if they have been unplugged for a long time. The battery helps preserve basic machine configuration information between bootups so if you're having problems with your monitor it might even be related to the battery. If in doubt, replace the battery.
The PRAM reset and extensions off are the other stock replies but you've tried those.
Brian

Macbook pro won't boot with two new 4GB RAM sticks.

I have a mid 2010 Macbook Pro. It came with two 2GB RAM sticks. After downloading Lion, my computer started to get sluggish so I thought I would upgrade the ram. I bought two 4GB Corsair RAM sticks and tried to install them. My computer will boot up if I install one of the new 4GB sticks and leave an old 2GB stick; but it won't boot with both of the new 4GB sticks. Any ideas?

rdsvs wrote:
all specs are the same. old and new has code as below
pc2-5300 ddr2 667 200pin
Unless I misread your reply, that is not quite accurate.
Late 2008 Macbooks uses DDR3 1066MHz 204 PIN.
Late 2011 Macbooks uses DDR3 1333MHz 204 PIN.
Late 2012 Macbooks uses DDR3 1600MHz 204 PIN.

Won't boot with external display connected

My MacBook Pro (circa 1997) won't boot with the external display connected. I can connect the external display (20in flat planel) after it has started, and it works just fine.
I have tried two different DVI cables (one of which I think is a DVI-A cable) and the DVI-to-VGA cable. The result is the same.
During the boot phase I get the tone, the apple logo and the progress wheel. After 30 seconds to one minute those disappear to be replaced by an empty blue screen.

In case anyone wonders, my "solution" was to change to a WB Elements Desktop 3TB (only USB 2.0 is currently available for this model). I miss the speed of USB 3.0, but it's much nicer to not have to remember to unplug and plug in the hard drive each time I boot.
Still hoping to see a proper solution to this (since I don't have the WB My Book anymore, I can't test adaher's suggestion).

PC won't boot with X-fi XtremeMusic

# This is my first post, so please tell me if I'm not giving enough info or anything..
I bought a X-fi XtremeMusic and wanted to try out.. So I plugged it into a free PCI slot to find out it wasn't working: I couldn't boot. The only thing that would happen were the casefans spinning, but my screen remained black.
I then tried to boot without the soundcard in the PCI slot, but my screen was still black.. Then I removed the onboard battery from the mainboard and waited a minute or two and put it back in: I was now able to boot again. I tried this one more time and exactly the same happened.
Now I read something about X-fi soundcards and nForce4 chipsets not meshing very well, but I have a gigabyte MA-790XT-UD4P mainboard, so this doesn't apply to me I assume.
Other specs: AMD Phenom II 720
XFX Radeon HD 4870
CoolerMaster 620w power supply
My question is: what could be causing this problem? Or is it possible that my card is broken?
Thanks!

'Re: PC won't boot with X-fi XtremeMusic? Yeah I tried it in both PCI slots, but none worked. Still I wonder about one thing, which I forgot to mention: When I replace the onboard battery and boot I get an error (which I resolve by using the last known good option instead of putting everything to stock value as I'm overclocking in the bios) that the bios checksum is incorrect, so putting in the card changes some value in the bios.. But what value? And does this imply that maybe updating my bios might solve the problem?
Also might I ask what bios revision you are currently using (I'm using the F4 bios)
About the case thing you might also be right: I do have some difficulty putting in the card as it doesn't fit perfectly. I have a CoolerMaster CM690 case which has tool-free fittings, but I can't get the fitting which holds the card down without using substantial force. This also causes the card to be in the PCI slot at a slight angle, I thought this wouldn't matter as the pins still connect, but may this be a problem? I already tried starting up without the case fitting holding the card in place and instead using my fingertips to hold in postion, though to no avail.
Oh and exactly what bracket should I look at (the one you referred to in your post)?

E450 won't boot with 4 cpus

E450, 4x300 CPU's all identical, will boot with any one, any two or any three of the five CPU's I have (one extra) but won't boot with any four installed.
When I do I get (transcribed from terminal - no ethernet) is sth like:
CPU0 has assumed the role of boot CPU
Online: CPU0: Ultra-II (V2.0) 3:1 2048kb 2-2 ECache MCap 13
Offline: CPU1:
Online: CPU2: unknown code (code 15) v15.15) ?:? 262080kb ?-? (type 15) ECache MCap 255Incompatable CPU Type -- DISABLED!]
Offline: CP
Hangs right there.
I have latest OP 3.30. Otherwise machine is perfect on three legs!
All points to me to being the top CPU slot maybe? I have a spare board so I'm going to try that.....
In the meantime, any ideas?
Steve

<table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>haroldkarl wrote on Sun, 22 January 2006 12:03</b></td></tr><tr><td class="quote">
the little riser are for is for a sound card... the same one that the Sparc 4 uses... hard to find... the others are "Elite3D-m6 assembly <=540-3058-06 is not compatible with the A20." a horizontal version of the Elite3D-M6... also hard to find.
you do know about this site??? http://sunsolve.sun.com/handbook_pub/Systems/E450/E450.html
haroldkarl
</td></tr></table>
Yes HaroldKarl I know Sunsolve, I work in Sun, but not for Sun!
This is my home E450, I just got it, trying to max it out. I bought four bare ones for 99p, ie about 1.50 Euro....
I used memory from my old Ultra 60, which I thought where 128mb sets, turns out they where 256mb, which the U60 sees as 128mb it seems. Anyway, 3gb RAM now!!
Actually it's quiter than that the U60, a more satisfying low hum of quality iron. I want to take it bed with me!
Steve
PS I have a girlfriend but she's not interested in a threesome with the E450 :(

Sawtooth won't boot with anything plugged into it.

My G4 450 won't boot with anything plugged into it at all. The power will go on but no boot. If I unplug everything (except the power cord) it will boot with a chime. Anyone know what the problem could be?

rs6er:
Well, it's likely to be a problem with the video card, the monitor, or the monitor cable. (I assume that this is your normal monitor which was just recently working on your Mac.)
Some thoughts... Have you tried reseating the video card? Does the monitor power on? Do you have another monitor and cable you can swap and try? Will it boot to Safe Mode ("s" key depressed at startup) with the monitor attached?
Gary
Message was edited by: Majordadusma

PowerMac DP G4 Won't Boot With All RAM Sticks Installed

A few weeks ago, my 800 MHz dual-processor G4 started having frequent kernel panics. I tried all sorts of things, including changing the PRAM battery, resetting the firmware, and resetting the PMU. Then, one day, it would only power up but not boot, so I took it in for repairs.
The shop I took it to determined that the logic board was malfunctioning and replaced it. The computer no longer has any kernel panics.
The machine was designed for three 500 MB RAM sticks, which is what it had ever since I bought it over five years ago. Now, apparently, it won't boot with the last one installed, though it will with two. The shop replaced the new logic board and and even swapped RAM, but the problem still persists. Neither the power supply nor the hard drive appear to be malfunctioning.
Does anyone have any ideas what's going on? Any ideas or advice would be greatly appreciated.
Thank you.
G4 800 MHz Dual Processor Mac OS X (10.4.9)

squeakmaster, welcome to Apple Discussions.
Have you tried the following with one 512MB RAM stick:
1. Palce it in the first RAM slot. Does the Mac boot?
2. If so, remove the stick & place it in the second RAM slot. Does it boot?
3. If so, remove the stick & place it in the third RAM slot. Does it boot?
The results of this test should reveal (1) if the stick boots in one or more RAM slots, the RAM is good and (2) if it fails to boot in a RAM slot, there is a problem with that slot.
Do this with each of the tree RAM sticks & post back the results.
When the logic board was replaced, was the firmware updated to be compliant with OS X. (Note - The firmware is installed on a chip on the logic board.) Check your Mac's firmware (Boot ROM version) version. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
Can you boot up in OS 9.x? If so you can use DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest firmware updates http://www.versiontracker.com/dyn/moreinfo/macos/10415
 Cheers, Tom

2nd HDD bay with HDD = notebook won't boot with HDD in 2nd HDD bay

I recently came into a Pavilion DV9308 Notebook. It was in decent shape, well looked new and since I like tinkering with laptops and the motherboard had the dreaded NVIDIA GPU failure going on, I sent the motherboard out to my motherboard dude and he put a newer NVIDIA video chip in, made some adjustments and modifications to the heatsink cooler etc. Along with my modifications including vent holes and sealing up the fan blowing assembly so when the fan turned on the hot air would leave the laptop it now runs Windows 7 64 bit with a 64GB Kingston OS SSHD and 4GB DDR2 800mhz ram. It runs like lightning and impresses people when they see it boot up in 15 seconds.
The problem is and the whole reason I picked this notebook to restore is because it has two acutal hard drive bays. Well ever since I've gotten the notebook It will not boot with a hard drive in both bays or a hard drive in Bay #2. I had to send the repaired motherboard back once because one of the ram slots wasn't working so this is happening on two different motherboards. I cannot find a reason why this is happening and have yet to find anyone that can help me with this. Can anyone explain to me what I'm doing wrong? I have all the correct drivers I think and the laptop runs at 130"F when pushed to the max! That is amazing compared to what it originally ran. It would be awesome if someone could please help me with this. Thanks.

Hello jason9922. I understand your notebook won't boot with a hard drive in the second bay.
When you say that the notebook won't boot with a drive in the second bay what exactly do you mean? Does the CAPS LOCK key flash or do you get an error?
When you have the hard drive installed can you access the BIOS? If so, is the hard drive detected within the BIOS?
I'll keep an eye out for your response. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

K7T Turbo LE and problems with IRQ routing Win98SE

When I boot my machine (AMD 1600+ on an MSI K7T Turbo Limited Edition), the BIOS reports me the following:
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Startech NIC in slot 2: IRQ 11
D-Link DFE-538 TX in slot 3: IRQ 10
Echo Mia soundcard in slot 4: IRQ 5
Onboard Promise ATA100 controller: IRQ 11
2x USB controllers Via 3038: IRQ 3 for each one
IDE controllers: IRQ 14 and 15
In "Settings - Control Panel - System - Device Manager", there's one big difference:
The two USB controllers (Via 3038 PCI to USB) are on IRQ 10!!! The only way for Via USB controllers to be on their real good one IRQ (3) is to completely disable "IRQ Steering" in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus".
To resolve this, I tried:
- different Via 4 in 1 (4.32, 4.35, 4.36): no changes
- Via IRQ miniport uninstalled: no changes
- Enable "PnP OS" and "ACPI" in the BIOS: no changes
- Tried all the combinations in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus - IRQ Steering" (except disabling IRQ Steering because like I said, it resolves the bug. Though, I want IRQ Steering to be enabled AND the bug resolved).
So, if anyone have a clue, it will be really appreciated.
Thanks in advance.
gugusse
- MSI K7T Turbo Limited Edition
- Athlon XP 1600+ (1.4ghz)
- Win 98SE with all the patches
- NIC Startech (Realtek 8139 chip) in PCI 2 (IRQ 11)
- NIC D-Link DFE-538 Tx in PCI 3 (IRQ 10)
- Echo Mia in PCI 4 (IRQ 5)
- SiS 6326 AGP card (doesn't take an IRQ!)
- HDD Quantum Fireball Lct-10 20 GB 5400 rpm on IDE 1
- HDD Maxtor 6 L080J4 80 GB 7200 rpm on second IDE of the Promise controller (running in standard IDE mode, not RAID)
- Plextor 8/4/32 (master) and CD-ROM 56x Affrey (slave) on IDE 2
- 4 in 1 v.4.35

Quote
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Just thought that I would let you know that I have the same troubles with no IRQ being assigned by the BIOS and due to this I am having troubles getting a DUAL monitor set up running!
--David

[865PE NEO2 PFISR] Won't boot with added memory

Recently I upgraded a few items on my PC which has been running fine for 18 months or so. I changed out the video card and bought double the memory of the same brand and type it had in it. I went from 1gig (2 sticks) and added two more sticks. But now it won't boot. The power is on but no output whatsoever.
I RMA'd the memory thinking that might be the problem but it's the same with the new set. I tried all sorts of memory/slot combos. Basically, the new memory works fine if you swap it out in bank A with the old stuff. That's how it's running right now, so I know all of the sticks are good. I can take a third and put it in either slot bank B and it'll boot, but obviously not run properly. But any combination of these four sticks and the system won't boot!
Please help!
I'm running this system:
Win XP (SP1 I believe)
865PE NEO2 PFISR
P4/3.0CGHz, 800M 478P/512K HT
DDR Corsair 512MB X4 (400)
Dual 80gb samsung HDs running SATA
Sapphire X800GTO 256M video card
Antec Sonata case
TruePower 380Watt ATX12V

What brand, model, and speed are the RAM sticks. Did you check your Test Report booklet which came with the mobo. If you can't find it, you can go to the MSI website and look for your MOBO and get the test report that way. Some brands/models will that have been tested are shown in the report to be okay in all 4 slots, some only test okay in 2 or 3. Check this report and if it is one of the brands/model/speed tested you will see how it fared. It may well be you the MOBO doesn't like your RAM in 3 or 4 slots.
Maybe I missed it, but did you try each slot with only one stick at a time? You may also have a bad RAM slot.

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

Mac Mini won't boot with install disk

tried booting with install disc in and pushing "c" on keyboard and doesn't work. Using a apple wireless keyboard. Also used the keyboard that came with Mac Pro but didn't work nor did a wired logitech.
any ideas?
Thanks!

+What is the source of the idea that the mac aluminum keyboard won't work with the mini?+
Dozens of reports in this forum over the past year.
Keep in mind that by "not working" what was meant was that the startup keys wouldn't work. The Alu keyboard otherwise works fine with the Mini.
It has also been reported that the Alu Keyboard does work for startup keys if it is plugged into a hub with an external power supply.

Power Mac G5 won't boot with Lion?

After installing Lion, my early Intel 2010 Power Mac G5 won't boot. There were no problems for the first 2 days. The third day my G5 wouldn't boot at all. Not using Lion's recovery function, many attempts to boot from a previous system disk, and firewire target mode. The keyboard seems to be dead after attempting to boot except for the DVD eject key. All I get is a grey screen with an icon of a folder with a question mark within the folder. This icon blinks on and off continuously. Since the keyboard isn't working, I can't reset the PRAM, start in safe mode, or any other keyboard commands. The failed boot doesn't even get far enough for the Apple window to open. I replaced the hard drive and accomplished nothing except for spending even more money and time.
This is VERY frustrating! Has anyone else had a similar problem with booting after Lion't installation??
Thanks.

1) you have a Mac pro Early 2009, remember this. It avoids confusion here in forum
2) you're HDD's OS cannot be found by the firmware of the Mac hence it results to a question mark
perform the following(recommended to use a USB keyboard)
a) startup manager
press and hold option on startup. Do u see your HDD?
b) if you have a back up of your data then you can boot to the install disk and perform an erase and install
repairing the permission will not work since the disc's OS is different from the HDD's OS.

System won't boot with incorrect date/time

Hey, I setup a computer back home for VNC, however there was a power outage and now the BIOS has reset. Unfortunately it defaults the date to 2099 for some reason, anyway now the computer won't boot (I can't remember the exact error). Anyway the trouble is I can't access that computer now, and it has no monitor hooked up, is there anyway I can force a boot with just keyboard and without setting the correct date in the BIOS (no one with access to the computer could do this).
Appreciate any help.

You can try to just press F1.
I have a similar issue with my home server, the battery on the motherboard is dead so when the pc is powered off for a while it will not remember the clock. When trying to boot the system in such a case it spits out an error where it offers to "ignore" the error if you press F1.
In my case I need to wait until my pc beeps before pressing F1, basically you need to get past the BIOS stage.
With a bit of luck it might work for you too.
Also I hope you have some ntp service running on your system to make sure the date gets set correctly on your system on bootup.
Last edited by Neburski (2014-02-19 12:35:00)

K7t turbo won't boot with xp1800+

Similar Messages

Maybe you are looking for