K7T Turbo2, doesn´t show splash screen

I´ve a problem with my K7T Turbo2, when the computer starts up, it doesn´t show me the MSI logo and it´s Enabled in the BIOS, if i disable it, the same... nothing happens. It´s strange a friend of mine has the same problem with the same Motherboard.
Please, need any help.
Thanks

I agree.
I think that if the board says it supports the fullscreen logo then it should when purchased.
Mine doesn't show the fullscreen logo either- I think that while it may sound trivial it is worth looking into because if a small feature like that doesn't work then I can suspect that the board is in fact at fault with my high idle temps of 55 degrees Celcius, (60 degrees loaded)
The heatsink/fan allowed 42 Degrees idle and 48 degrees loaded on my MSI 6378 PCB 1.0. Swapping the chip again gave consistent results. The paste is generic but it was the same on the 6378 anyway so that is not the problem. The system is stable for now but I worry about the long term effect.
And if the boot logo has a bug then maybe they really didnt implement the power savings correct either - viewing it as trivial since those temps are still within AMD's spec.
I know this is just a value setup but afterall Im still a student - Elec. Eng. and craftiness at this level disgusts so dont say why do I want my logo - Market segmentation is about less features for lowend not less quality (especially in something like a computer - data is involved). I had endless woes with my 6378 (crashing disk, screeching sound ) - imagine risking the PCB 3.0 Bios actually fixed a screeching sound issue. Go figure - MSI said that bios was not for PCB ver 1.0 and logic told me to go ahead anyway higher version usually means better code. (Of course I rationalised that mostlikely the new PCB mods were slight if only to take on the XP CPU's)
Long and short - The logo thing should be investigated especially if consistently wrong on others systems. Success in little things do add to consumer impression of a company. Dont brush this off.
My Cheap Components
MSI K7T Turbo2 Ver 5 Bios 3.6
Athlon 1.2 Ghz 100 FSB
2 x 128 Kingston cas 3 memory
XFX Geforce2 MX400 64 MB SM56 PCI Soft modem
40 GB WD
40 GB Seagate Norcent 32x10x40 CDRW
Afreey 10X DVD

Similar Messages

T450s startup takes 35 seconds before showing splash screen. (11 sec wake-up)

The follwing are my problems:1. When starting up the machine, it takes about 35 seconds before the first screen activity appears (Lenovo splash screen). After that it boots quite normal.
2. When waking out of sleep mode it takes 11 seconds before I see the power led stopping to "breath" and the screen wakes up.
It feels like this is a hardware/bios related issue, as (so far I know) hdd/ssd is only accessed after the bios has loaded and has finished its hardware checks. When sticking in a bootable usb it only starts flickering after the bios had loaded on screen.
Question:
Does anyone has an idea why my laptop is waiting so long to boot or to wake up? I don't mind waiting a bit, but waiting for 35 seconds + the normal boot time is really annoying. Specially with the fact that the laptop doesn't show any sign of live for 35 seconds after briefly lighting up the keyboard backlights. The wake-up delay is also very annoying since even my 7 year old BSOD laptop wakes-up faster, and I'm using sleep mode a lot.
Some origins that I'm thinking about:
- Hardware check during initial hardware startup does not yet recognize a dedicated GPU card. (POST: Power On Self Test)
- I don't think this is a problem with my software since the problems occurs before reading any media.
Things I tryed already:
- Reset bios.
- Start in legacy mode.
- Bios update
- rebuilding MBR (although I don't expect this to be the problem.)
- Refreshing windows installation although I don't expect this to be the problem.)
This problem was already at the beginning (with origenal hardware):
From the first time I started the laptop (so even with the HDD) I noticed it took quite long to start. I remember pressing the ON/OFF button multiple times and thinking I did something wrong, when suddenly the "Lenovo" splash screen appeared.
I hope someone can help me!

My problems have been solved! An engineer contacted me that they have recieved a spare mainboard and they wanted to make an appointment. I gave them the adress where I worked the next day since I'm very mobile, and the next day an engineer came by. He seemed like a skilled IBM engineer and tested my machine and came to the same conclusion as me. He then did a few tests to see if the problem was caused by something else then the mainboard but ended by replacing my mainboard with good care. After the replacement the the boot and wake-up time was normal like it should be. I'm very pleased by the service Lenovo ThinkPad has given me. I need to add that when I called for support I got someone on the line that could not really understand me, neighter dutch or english. But that was also duo a bad connection it seemed.. But after that call I did not really expect this would come to a good end. I was then really suppriced that 5 day's later a dutch engineer manager called me to make a appointment.

My app only shows splash screen...

Hello,
my application only shows the splash screen and then,,, nothing....
my app: [http://freiheit.hostse.com/sir.html]
I've already googled and I didn't find anything :(
Thanks for your help in advance

Hi,
Can you please tell me what was the exact problem area. I am facing same problem with my application. I can run this application successfullly on other machines but on my machine not able to get screen.

Show splash screen for x amount of seconds

Is there a better way to show a splash screen for x seconds than putting it in a while loop? It just seems so inefficiant and it uses a lot of processing power. This is what I have: long startTime = System.currentTimeMillis();
while(System.getCurrentTimeMillis() <= startTime + 5000) {
//wait
mainPage.setVisible(true);

javax.swing.Timer.
Also:
http://java.sun.com/javase/6/docs/api/java/awt/SplashS
creen.htmlThank you, I knew there had to be a better way.

Showing splash screen while loading...

Hi,
I'd like to show a splash screen while the application is loading (setting up hibernate session etc.) - here is my main method which is loading hibernate and starting up the application:
        public static void main(String[] args) {
          java.awt.EventQueue.invokeLater(new Runnable() {
               public void run() {
                    MdbCheckerApp app = new MdbCheckerApp();
                    app.initializeLookAndFeel();
                    // preload Hibernate session
                    HibernateUtil.getSession();
                    // login successful
                    // if (app.login()) {
                    new MdbChecker().setVisible(true);
          HibernateUtil.closeSession();
     }How do I show my splash screen while simultaneously loading the hibernate session?
Thanks in advance
- Stephan

However, I'm not quite sure on how to proceed...
    public static void main(String args[]) {
        final TestForm tf = new TestForm();
        tf.showSplash();
        tf.runInitializer(new Runnable() {
            public void run() {
                try {
                    Thread.currentThread().sleep(3000);
                } catch (Exception e) {}
                tf.hideSplash();
    public void runInitializer(Runnable r) {
        Thread t = new Thread(r);
        t.start();
    public SplashScreen showSplash() {
        // if a splash window was already created...
        if(splash != null) {
            // if it's showing, leave it; else null it
            if(splash.isShowing()) {
                return splash;
            } else {
                splash = null;
        splash = new SplashScreen(null, true);
        centerComponent(splash);
        splash.show();
        return splash;
    public void hideSplash() {
        if (splash != null) {
            splash.dispose();
            splash = null;
    }I'm wondering why I do only see the splash screen (I was hoping that the splash screen would be disappearing after 3 seconds).
Here is the code of my splash screen:
public class SplashScreen extends javax.swing.JDialog {
    /** Creates new form SplashScreen */
    public SplashScreen(java.awt.Frame parent, boolean modal) {
        super(parent, modal);
        initComponents();
        setLocationRelativeTo(null);
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        jPanel1 = new javax.swing.JPanel();
        jLabel1 = new javax.swing.JLabel();
        jProgressBar1 = new javax.swing.JProgressBar();
        setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
        setTitle(java.util.ResourceBundle.getBundle("com/gigatronik/mdbchecker/ui/bundle/MdbCheckerMessages").getString("splashscreen.title"));
        setModal(true);
        setUndecorated(true);
        jPanel1.setBorder(javax.swing.BorderFactory.createEtchedBorder());
        jLabel1.setIcon(new javax.swing.ImageIcon(getClass().getResource("/com/gigatronik/mdbchecker/ui/resources/gigatronik_4c_300.jpg")));
        jProgressBar1.setIndeterminate(true);
        org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
        jPanel1.setLayout(jPanel1Layout);
        jPanel1Layout.setHorizontalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jProgressBar1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .add(org.jdesktop.layout.GroupLayout.LEADING, jLabel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
        jPanel1Layout.setVerticalGroup(
            jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(jPanel1Layout.createSequentialGroup()
                .addContainerGap()
                .add(jLabel1)
                .addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
                .add(jProgressBar1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
        org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
        layout.setVerticalGroup(
            layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(layout.createSequentialGroup()
                .addContainerGap()
                .add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
        pack();
    }// </editor-fold>
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new SplashScreen(new javax.swing.JFrame(), true).setVisible(true);
    // Variables declaration - do not modify
    private javax.swing.JLabel jLabel1;
    private javax.swing.JPanel jPanel1;
    private javax.swing.JProgressBar jProgressBar1;
    // End of variables declaration
}Any help would be greatly appreciated.
- Stephan

ITunes recognizes iPhone, but doesn't show sync screen-what to do?

My iphone 3G S is authorized, has the latest software and I am running the latest iTunes as well on my MacBook.
When I connect the iPhone, the icon is visible on the left hand side pane in iTunes—under 'devices', but the screen freezes when I select the iphone icon, i.e. nothing seems to happen and I can't see anything related to syncing my iPhone.
File->'Sync iPod' item is also dimmed.
(Photos sync automatically, with no problem)
I can't seem to find any relevant info so far, because iTunes recognizes the iPhone in my case—but won't show the sync screen.
Message was edited by: Bonal

First step is to see if the problem is with the phone, the USB or the computer. For the USB make sure you are connecting to a port on the back of the computer, not to a hub and not to the keyboard. Try connecting to a different computer. If it works you have narrowed the problem. If it doesn't the problem is the phone or the cable, so try a different cable. If it works on a different computer try creating a new user on your computer, then see if you can connect when logged on as that user (you could do this first, of course).

Why the graphics doesn't show on screen?

I wrote the code using AWT to draw an Arc2D to window after received input numbers but it draws nothing to screen. I tried to debug and found nothing. Can someone help me on this?
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
import java.awt.geom.*;
import java.awt.image.*;
public class PieChart extends JFrame implements ActionListener
private JPanel inputP;
private DrawPanel drawP;
private JLabel instruct, prompt1, prompt2, prompt3, prompt4; //all prompt labels
private JTextField num1, num2, num3, num4; //input text field
int value1, value2, value3, value4, total;
//Graphics2D g2d;
public PieChart()
super( "Drawing 2D PieChart" );
Container c = getContentPane();
c.setLayout(new FlowLayout());
     inputP = new JPanel();
inputP.setLayout(new GridLayout(4,2));
                                                                                //initial text prompts
instruct = new JLabel("Enter the number at each prompt and press enter");
     prompt1 = new JLabel("First Number:");
prompt2 = new JLabel("Second Number:");
     prompt3 = new JLabel("Third Number:");
prompt4 = new JLabel("Fourth Number:");
                                                                                //initial input fields
num1 = new JTextField(5);
     num1.addActionListener(this);
     num2 = new JTextField(5);
     num2.addActionListener(this);
     num3 = new JTextField(5);
     num3.addActionListener(this);
     num4 = new JTextField(5);
     num4.addActionListener(this);
     inputP.add(prompt1);
     inputP.add(num1);
     inputP.add(prompt2);
     inputP.add(num2);
     inputP.add(prompt3);
     inputP.add(num3);
     inputP.add(prompt4);
     inputP.add(num4);
     c.add(inputP, BorderLayout.NORTH);
drawP = new DrawPanel(350,180);
drawP.add(instruct);
c.add(drawP, BorderLayout.CENTER);
setSize( 350, 560 );
show();
public void actionPerformed(ActionEvent e)
          String getInput;
          if(e.getSource() == num1)
               getInput = num1.getText();
               value1 = Integer.parseInt(getInput);
num2.grabFocus();
          if(e.getSource() == num2)
               getInput = num2.getText();
               value2 = Integer.parseInt(getInput);
num3.grabFocus();
          if(e.getSource() == num3)
               getInput = num3.getText();
               value3 = Integer.parseInt(getInput);
               num4.grabFocus();
          if(e.getSource() == num4)
               getInput = num4.getText();
               value4 = Integer.parseInt(getInput);
               drawP.setPie(value1, value2, value3,value4);
The main function will generate the new PieChart object and Overridden so we can exit when window is closed.*********************/
public static void main( String args[] )
PieChart app = new PieChart();
app.addWindowListener(
new WindowAdapter() {
public void windowClosing( WindowEvent e )
System.exit( 0 );
}//endmain
class DrawPanel extends JPanel {
//private int currentChoice = -1; // don't draw first time
private int width = 100, height = 100;
private int vl1, vl2, vl3, vl4, total ;
Graphics2D g2d;
public DrawPanel( int w, int h )
width = ( w >= 0 ? w : 100 );
height = ( h >= 0 ? h : 100 );
public void paintComponent( Graphics g )
super.paintComponent( g );
// create 2D by casting g to Graphics2D
g2d = ( Graphics2D ) g;
if(total == 0 )
g2d.setPaint(Color.black);
g2d.setStroke(new BasicStroke(1.0f));
g2d.draw(new Arc2D.Double(250,90,80,100,0,360,Arc2D.PIE));
System.out.print("Done drawing a cirle");
}else // draw 2D pie-shaped arc in white
g2d.setPaint( Color.cyan );
g2d.setStroke( new BasicStroke( 2.0f ) );
g2d.fill(new Arc2D.Double(120,90,80,100,0,(vl1*360/total),Arc2D.PIE));
g2d.setPaint( Color.blue );
g2d.setStroke( new BasicStroke( 2.0f ) );
g2d.fill(new Arc2D.Double(120,90,80,100,(vl1*360/total),(vl2*360/total),Arc2D.PIE));
g2d.setPaint( Color.green );
g2d.setStroke( new BasicStroke( 2.0f ) );
g2d.fill(new Arc2D.Double(120,90,80,100,(vl2*360/total),(vl3*360/total),Arc2D.PIE));
g2d.setPaint( Color.red );
g2d.setStroke( new BasicStroke( 2.0f ) );
g2d.fill(new Arc2D.Double(120,90,80,100,(vl3*360/total),(vl4*360/total),Arc2D.PIE));
System.out.print("End of drawing ");
public void setPie( int v1, int v2, int v3, int v4 )
total = 0;
vl1 = v1;
vl2 = v2;
vl3 = v3;
vl4 = v4;
total = v1 + v2 + v3 + v4;
System.out.print(v1+ " "+ v2+" "+v3+" "+v4+ " Total value: " + total);
repaint();
}

The first thing I see is the you have declared 'total' in DrawPanel. As it is never set there, you are testing a variable which is always zero.

WebDynpro iView doesn't show initial screen

Hi,
I've a strange problem in calling an process from a Web Dynpro iView. Instead the expected 1st form in Action1 I only receive the text message: "Process has been initiated".
The strange thing is, testing the processes in "Initiate" tab in Design Time allways runs fine with the first screen.
This problem occurs with sap delivered example processes too. For example I tried the SAP delivered example "Time-off process".
My steps are:
1. check for related action-role is set to "Initiator".
2. Generation URL.
3. Initiating by "Initiate" tab from DesignTime.
4. Process opens with the first step form correctly.
5. copy the init string into WebDynpro iView.
6. starting Web Dynpro for Java iView
7. Instead the expected form, I only receive the text message"Process has been initiated"
I suppose something is wrong with my WebDynpro or role settings, but I don't have any idea anymore.
My settings in Web Dynpro for Java iView are:
Application: AInstantiation
process.template.id=7CE44B...&process.autostart=t
Namespace: sap.com/cafeugpuiinst
Authentication: default
In Portal I own J2EE_admin, GP Superadmin, GP Runtime WC and GP Business Expert roles.
Thanks.
Michael
Edited by: Michael R. Mueller on Apr 11, 2008 10:02 AM

Hi Sujana,
thanks for your message again. I checked my parameters again, but couldn't find any problems there.
Requestor ID
I have been inluded all of the generated parameters from Design Time into my Web Dynpro Proberties. The first action of the process is set to Initiator. I think in this case the user assignment should be manged by the system automatically.
Namespace:
Also the namespace sap.com/cafeugpuiinst is definitly working. When I changed this to an other value, I received an application-error after starting the iView.
Layout
I'm not sure about the required layout. Which are the requirements? Is there a special layout for my page, which is including the Web Dynpro iView, necessary?
..But my Callable Object only needs one iView I think.
How I call the process
My structure in calling this process is:
User chooses entry in User-Menu -> User assigned Role -> Page (standard layout) -> Web Dynpro iView -> GP Process initiate
I posted my configuration here, maybe you can take a look at this please?
My properties for my Web Dynpro are the following:
Application Name: AInstantiation
Application Parameters:
+process.template.id=7CE44BF090BF11D99817000D60B211F1
&EndDate=&AbsenceTypeText=&BeginDate=&process.autostart=t
&SimulationCode=&CompletionCode=&ShortTermCode=
&CompletionMessage=&Comments=&SimulationMessage=&PaidFlag=&LongTermCode=+
Namespace: sap.com/cafeugpuiinst
GP Design Time
And the parameters generated from URL generation in GP Design Time (starting with button "open instantiate application" is working) are:
+../../sap.com/cafeugpuiinst/AInstantiation?process.template.id=7CE44BF090BF11D99817000D60B211F1
&EndDate=&AbsenceTypeText=&BeginDate= &process.autostart=t
&SimulationCode=&CompletionCode=&ShortTermCode=
&CompletionMessage=&Comments=&SimulationMessage=&PaidFlag=&LongTermCode=+
I pasted the parameters of this string exactly into the application parameter field of my Web Dynpro.
Thanks again.
Regards,
Michael

Splash screen needs to keep on top

Hello Everyone,
I have been working on application where i need to show splash screen before launching the actual application.
I did create JDailog as splash screen and want to show this splash screen at top of all application but I don't want to set setAlwaysOnTop(true). becasue my requirement is that to keep splash screen on top at the time of launching. if user click any other application and splash screen doesn't remain on top, that is fine with me.
i want when i do launch my application and start working on other application like MS word, splash screen must visible at the top of the active application.
so what really i need to do to keep this on top of active application.
I don't want to use setAlwaysOnTop(true). because it has certain limitations and that doesnt really work in my case.
really looking for your great response.
Thanks,

You could do setAlwaysOnTop( true ) to ensure that the splash screen is shown on top,
and have a listener to reset it once it is made visible. Something like
splash.addHierarchyListener( new HierarchyListener() {
     public void hierarchyChanged(HierarchyEvent e) {
          if ( HierarchyEvent.SHOWING_CHANGED == ( e.getChangeFlags() & HierarchyEvent.SHOWING_CHANGED ) ) {
               splash.setAlwaysOnTop( false );
};

Splash Screen Issue

I am not able to show Splash Screen on the screen before application is loaded. I have already posted under Swings. Please take a look at the problems and tell me how can I solve my problem ? The address for the other thread is
http://forum.java.sun.com/thread.jspa?threadID=793668

I am not able to show Splash Screen on the screen before application is loaded. I have already posted under Swings. Please take a look at the problems and tell me how can I solve my problem ? The address for the other thread is
http://forum.java.sun.com/thread.jspa?threadID=793668

System Update Splash Screen Exit

I've got four new systems here, all updated to SU 3.14, one downloaded and installed 800+MB of updates, and now all four launch SU, show splash screen, then exit immediately. The other three systems never even downloaded updates.
No error messages from SU or Windows.
Any help?

I'm seeing this too on a brand new T400 Vista x64 System. TVSU ran fine a couple of times and loaded all the drivers for me on a clean x64 install. Now I see the splash screen, then nothing. Tried reinstalling to no avil.
UPDATE: My issue may have been that I was running TVSU via RDP. Once I got home and tried again, it worked.
Message Edited by mhab12 on 07-10-2009 09:41 AM

After upgrading to FF4, my 2 add-ons (gmail manager and foxclocks) bar doesn't show at the bottom bar, re-installed to the latest version and it still doesn't show them....help!

add-ons bar at the bottom doesn't show on-screen (maximize or minimize screen)

suavedog:
Try this:
iTunes 7.2 for Windows doesn't open

Vado doesn't boot up / stuck in the splash screen

My recently bought Creative Vado HD doesn't boot anymore - I press the power button and I only see the red led blink for a second. Before this it used to turn on, but wouldn't get out of the splash screen "VADO HD". (and it wouldnt turn off, only if I took out the battery)
The camera has frozen sometimes before, but then I would take the battery out and put it in again to have it working ok. Now reinsertingthe battery doesnt fix it.
If I connect the vado to the pc, it just shows the splash screen and doesnt boot or even charge the battery (I left it connected ov3ernight but It didnt charge the battery, It just killed it because it stayed all night showing the splash screen. - and thats why , i think, it only shows the red light blink instead of showing the splash screen when i try to turn the camera on.
I dont know if this issue might have triggered the problem but here it is:
minutes before vado died I connected the vado to my vizio tv and watched some videos. Then I pulled the hdmi cable and connected the camera to the pc. I noticed it wasnt detected at all -- the vado was stuck in the splash screen.
i cant install a firmware or anything else because the camera is not detected and is stuck in the splash screen.

Hi Setmedown,
It sounds like something is wrong with the Vado HD, if you have not already I would suggest contacting our Customer Support.

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

TS3274 My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

My App Store shows 3 updates but when I go to it the screen is blank. It will not give me the option to update all or one at a time, it doesn't show the apps at all.

Many people are having this problem for the last couple of days. This is a problem that Apple has to fix. If you look around the forum, you will see many, many discusssions about this and they have been going on for a few days.
According to Fly150 in another discussion, this is a workaround - for the time being.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

K7T Turbo2, doesn´t show splash screen

Similar Messages

Maybe you are looking for