(K7T Turbo2) Fuzzy Logic 4 in WinXP not working

Tried Fuzzy Logic 3 in Win98 without any problem. But Fuzzy Logic 4 in WinXP can't change FSB. Voltage and speed displayed fine. Anyone have success in WinXP??
Here's my system config:
MSI K7T Turbo2 Bios 3.5
AMD XP2000+ Retail
2 X 256MB Curcial PC133 CAS2
ATI Radeon LE AGP 32MB DDR
IBM 75GXP 45GB
Promise FastTrack100
- 2 x Quantum Fireball 4GB Mirror Raid
HP8100i CDRW
D-Link 538TX 10/100 PCI

hmmm it works fine on the kt3 ultra boards.....

Similar Messages

Fuzzy logic 4 doesn't work with the KT4-SR!

why ;( ?!

I also have problems running Fuzzy Logic.
I do not run any other utilities, and I have the latest version of it. When I run the program, it sits in the system tray, if I try to click on it, nothing happens. Taskmanager shows FL4 uses around 99% of the CPU. Aslo, when I shut down after running FL4, Win XP can take upto 10 mins to kill the app.
Does anyone have a fix, re-installing or upgrading FL4 doesn't work.
Alternativly, is there another program that can be used?
I have:
KT4 Ultra with AMD XP 2400+
Windows XP Pro / SP1
Thanks

Logical Standby Does not work

Hi,
I'm not sure if anyone is using the logical standby database because it appears to me to be complete rubbish. The apply of redo data just does not appear to work. for example I have this table:
create table test29(
BP_ID NUMBER(10) NOT NULL,
BP_K_ID NUMBER(10) NOT NULL,
BP_TYP CHAR(2) NOT NULL,
BP_U_ID NUMBER(10),
BP_ACTIVE DATE NOT NULL,
BP_USED NUMBER(6) NOT NULL,
BP_STATUS CHAR(1) NOT NULL,
BP_LASTUPDATE DATE NOT NULL
and insert this data:
insert into test29
select 10643,291904,'O ',1,TO_DATE('01/05/2003 00:44:18', 'MM/DD/YYYY HH24:MI:SS'),0,'A',TO_DATE('01/06/2004 20:13:08', 'MM/DD/YYYY HH24:MI:SS') from dual
When this information is transfered to the logical standby and it attempts to read it i get a ORA-26689: column datatype mismatch in LCR. But wait! If I change the name of column 6 (BP_PUNKTE) to say (BP_AAAAA) and try again it works!!! The logical standby fails on many tables just because of the name (updates, inserts anything)...did anyone at oracle test this? Is anyone using the logical standby have any ideas how and if I could ever get this working.
Using Oracle 9.2.0.4. on Redhat 2.1.
Thanks!
Steve.

unfortunately not. the oracle licence was purchased before i arrived and when I attempted to get a support contact they want the money since we purchased the licence 3 years ago. 3 years of cash for free! why should I pay for their bugs anyway, when we buy this expensive software it should work. when I buy a new car from ford and radio does not work I don't have to pay ford to fix it. rip-off!

What's With Volume Logic Plug-In Not Working With iTunes V7. and Up

Hello Folks. I recently updated to iTunes ve 7.0.2 and now my great Volume Logic Plug-in won't work. I downloaded the latest update and then read info on the Plantronics site about the problems with the plug-in with new itunes updates.
Is anyone here figured out what's going on or a workaround. That plug-in makes such a positive difference in music sound quality, the tunes almost feel "naked" without it
Steve

Prior to the 1.3.2 released (beta or the now-available final), Volume Logic did not work at all with iTunes 7. According to Plantronics, Volume Logic does not work with Airtunes and the AIrport Express (it's stated right in their FAQ).

Logical mapping seems not working

Logical mapping in CF server admin seem not working.. I just
created a logical mapping \images with a valid path in the server
c:\images.
If I try to access
http://localhost:8500/images/test.gif..
it shows the image..
But if the same URL is embedded in the codlfusion page for a
image. It does not show the image..
ie.. I get a 'x' symbol for the image.. If I right click on
the image and see the properties, it shows a URL.. Same URL, if I
copy paste into IE browser, it shows the image.. Is there a
problem??

In the Coldfusion Administrator, put
logical path = /images
directory path = C:\CFusionMX7\wwwroot\images
Then, this should show the picture
<img src="/images/test.gif">
as would
<img src="
http://127.0.0.1:8500/images/test.gif"
>

Logic Pro 8 NOT working w/ Fast Track Ultra

I'm new to producing music and i got the older logic pro 8 from a friend today. The problem started when I tried to play a sound and nothing would come out from my Bx8's. I know its not b/c of the system preferences on my macbook cuz i can still play music on my itunes and sounds will still come out from things on the internet. Also, I went to LogicPro>> Preferences>> Audio and i made sure the device was on M-Audio Fast Track Ultra. When i put the device to Built-in Output i get sound so I know it has something to do with logic. If someone could guide me through this it would be GREAT.

I think you've turned things around. The topic title should read "Fast Track Utra not working with Logic".
Since Logic does produce audio when you route to Built In, that means that the FTU is the culprit. Have you installed the right, most recent drivers for it? Not from disk, but DLed from the M-Audio site? And what exact OS X and Logic version do you use?
regards, Erik.

Logic Node 9 not working with mac mini

MBP late 2008 4gb ram 500gb hd + New Mac Mini 2009 Base with 1gb ram
Logic Node installed - settings under audio checked... etc
Node working (slightly) see picture
I had to unplug the edirol keyboard, brother laser printer, fw800 drives, 3 usb hard drives, external alu keyboard griffin powermate and turn off airport to get working.
then after it was working I would still get overload messages (see below)
barely sending anything to the node...
[IMG]http://www.musicrowsongs.com/logicnode.jpg[/IMG]
any ideas?
thanx
michael

1.) when node not working it appears to be the fw800 drives
2) when it does work - no major node processing
[img]http://www.musicrowsongs.com/logicnode2.jpg[/img]
Using a lot of high end waves plugs
mercury v6r7 - perhaps Maserati - API - SSL not going into the node? Why?

Logic 8 sound not working on Macbook Pro

Hi has anyone else had problems with the sound not working on a MacBook pro.
Build in audio works fine but when I launch Logic all i get is a clicking sound.
MacBook is brand new.
Thanks

yer i did the latest updates and have it configured right too. when i open up a new project it works but when i open a full track i made in logi 7 it does have any sound and makes clicking noise.
i am wondering if its a UB update on one of my plug-in's? god its annonying aaaaaaarrr

How to connect Yahama keyboard to mac to use in Logic but drive not working

I am trying to connect a keyboard using a midi interface to my MAC. I have installed the most recent drivers from the Yahama website and it's still not working. When I go into Audo midi set up the icon for the keyboard is there but it is grayed out. Can anyone help

Hey ChEmWen - I worked it out! I think I had the same problem as you, and the first driver I download didn't work. It took some more searching, you need to download the CORRECT for your OS driver from
here:
http://download.yamaha.com/usb_midi/
I sent YAMAHA a message on their facebook support letting them know of their problem:
Hey, I worked it out, I had downloaded the wrong driver for my OS. I think you need to update this page:
http://download.yamaha.com/search/detail/?1400890058...
So that users are ACTUALLY directed to download from HERE:
http://download.yamaha.com/usb_midi/
I only managed to find the CORRECT driver by doing a more thorough google search.
Anyway I hope this helps!!! Cheers.

VPN mac to winxp not working

I'm trying to set up a VPN connection from Tiger to VPN running on a winxp pc. There are firewalls at both ends, and I've set up port forwarding on the server end for port 1723.
The client end network has private addresses in the range 192.168.1.nnn, and the server end has 192.168.0.nnn. VPN from a winxp pc works fine. It connects and I can see the shares etc. as if it was all one big LAN, which is as it should be. From the Mac I can make the VPN (PPTP) connection just fine, and the winxp pc shows it as being set up. The Mac VPN is allocated client and server addresses in the 192.168.0.nnn range. But I can't find the server using "Go to server" in the Finder. I've tried every format I can think of, including SMB://192.168.0.2/(share name), where this is the IP address of the pc running the vpn server, SMB://(external IP of server)/(share name) or just SMB://server/(share name), "server" is the NETBIOS name of the server.
HELP!!! (please)...

You in your original post said:
The Mac VPN is allocated client and server addresses in the 192.168.0.nnn range.
When using a VPN connection it is quite normal for a Mac to be connected to a VPN and be able to use local network resources as well (doesn't work this way with Windows XP).
I suspect it is more an issue with the PC than with the Mac.
iFelix

Logical expression OR not working

Hello Experts,
I am using logical expression 'OR' but the current statement does not seems to work.
Is my statement correct ?? Is there something else which I can use in place of 'OR'??
if R1_NO EQ 'X'
    DELETE itab_abapcode from n3 to row_end_event
or R2_NO EQ 'X'
    delete itab_abapcode from n1 to row_end_perform
or R3_NO EQ 'X'
    delete itab_abapcode from n2 to row_end_call.
endif.

Hi
   I think you should learn more about if statement.
   Usually we use
if <condition>
         statement
elseif <condition>
         statement
   else.
         satement
   endif.
The condition is the whole part, after judge the condition statement, program will process the statement.
so just change your 'OR' statement into if else.
if R1_NO EQ 'X'.
DELETE itab_abapcode from n3 to row_end_event
elseif R2_NO EQ 'X'
delete itab_abapcode from n1 to row_end_perform
elseif R3_NO EQ 'X'
delete itab_abapcode from n2 to row_end_call.
endif.

Doing clean install but logic studio does not work. Getting Error message

I have my box Logic Studio 9 upgrade but it will not install on my SSD. Final cut and all other reinstalls worked. Cannot install LP 7 because it is a PPC
written program. Im trying to do a clean install of the lion OS but cannot get my most inportant program to install. I dont want to buy the program again at the app store. What do think my options are? I've had Logic since 6.0

Hi
First, get rid of your designer, the page design/code is a mess.
There are a number of problems with the page, not least being the disabling of the back button in all browsers I tested it in, (visitors may visit once with this, but are unlikely to do so a 2nd time).
The menu system is a fixed size so that when the browser is resized it overflows the browser window.
The use of tables for layout is not recommended as it is inaccessible to users using assistive devices.
To put this more politely, if you paid for this, ask for your money back. If you did not pay, then start again and use one of the dreamweaver layouts for your page, for more info, see - http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html.
PZ

Logical Stanbdy database not working

Dear Friends,
I configured a logical standby database in oracle 11g. First i configured the physical standby. Its working fine. Data transfered. Then i convert to logical standby. The commands are working correctly. SCN also changed in logical standby. Archives from primary to standby moving correctly. But its not applying.
Please help me to solve this issue.
STANDBY DATABASE
SQL> select type,high_scn,status from v$logstdby;
TYPE HIGH_SCN STATUS
COORDINATOR 1250354 ORA-16116: no work available
ANALYZER 1250258 ORA-16116: no work available
APPLIER 1250258 ORA-16116: no work available
APPLIER 1248628 ORA-16116: no work available
APPLIER 1250251 ORA-16116: no work available
APPLIER ORA-16116: no work available
APPLIER ORA-16116: no work available
READER 1250354 ORA-16116: no work available
BUILDER 1250292 ORA-16116: no work available
PREPARER 1250291 ORA-16116: no work available
10 rows selected.
SQL> select name,value from v$logstdby_stats where name = 'coordinator state';
NAME VALUE
coordinator state IDLE
SQL> select applied_scn,latest_scn from v$logstdby_progress;
APPLIED_SCN LATEST_SCN
1250393 1250396
standby alertlog
Primary database is in MAXIMUM PERFORMANCE mode
kcrrvslf: inactive RFS archival for log 4 thread 1 sequence 96
kcrrvslf: inactive RFS archival for log 5 thread 1 sequence 97
kcrrvslf: inactive RFS archival for log 7 thread 1 sequence 93
kcrrvslf: inactive RFS archival for log 8 thread 1 sequence 94
RFS[3]: Successfully opened standby log 6: 'D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG'
Sun Sep 11 18:45:32 2011
LOGMINER: End mining logfile for session 1 thread 1 sequence 97, D:\APP\THI\ORADATA\LOGDB\STDREDO2.LOG
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 98, D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG
LOGMINER: End mining logfile for session 1 thread 1 sequence 98, D:\APP\THI\ORADATA\LOGDB\STDREDO3.LOG
Primary database is in MAXIMUM PERFORMANCE mode
kcrrvslf: inactive RFS archival for log 4 thread 1 sequence 96
kcrrvslf: inactive RFS archival for log 5 thread 1 sequence 97
kcrrvslf: inactive RFS archival for log 6 thread 1 sequence 98
kcrrvslf: inactive RFS archival for log 7 thread 1 sequence 93
kcrrvslf: inactive RFS archival for log 8 thread 1 sequence 94
RFS[3]: No standby redo logfiles of size 102400 blocks available
Sun Sep 11 18:47:35 2011
ARCH: Archival stopped, error occurred. Will continue retrying
Errors in file c:\app\thi\diag\rdbms\logdb\logdb\trace\logdb_arc2_1044.trc:
ORA-16014: log 7 sequence# 93 not archived, no available destinations
ORA-00312: online log 7 thread 1: 'D:\APP\THI\ORADATA\LOGDB\STDREDO4.LOG'
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=D:\APP\THI\arch\ VALID_FOR=(ONLINE_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=logdb
SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string service=proddb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=proddb
SQL> show parameter log_archive_dest_3
NAME TYPE VALUE
log_archive_dest_3 string service=logdb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=logdb
PRODUCTION
SQL> select current_scn from v$database;
CURRENT_SCN
1250406
SQL> show parameter log_archive_dest_1
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=c:\app\arch\ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=proddb
SQL> show parameter log_archive_dest_3
NAME TYPE VALUE
log_archive_dest_3 string service=logdb LGWR SYNC valid_for=(online_logfiles,primary_role) db_unique_name=logdb
If any doubt, please tell me.
Please help me.

I happy to help but you can help too ( Total Questions: 11 (11 unresolved)) Please consider marking some of your old questions answered.
You have a valid_for attribute mismatch issue :
Yours :
log_archive_dest_1 string LOCATION=D:\APP\THI\arch\ VALID_FOR=(ONLINE_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=logdb
log_archive_dest_1 string LOCATION=c:\app\arch\ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=proddbI think the ONLINE_LOGFILES should be replaced with ALL_LOGFILES.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_arch_dest_param.htm
Great details by the way.
Best Regards
mseberg
I also noticed this Oracle note :
Logical Apply stops with ora-16260 [ID 784743.1]
Edited by: mseberg on Sep 12, 2011 7:58 AM

Logic 8 TDM not working

Hi - I have the following setup.
Intel Dual Core Xeon 3 GHz
Protools 7.4
Logic 8.0.2
OSX 10.4.9
Protools HD 3 connected to Apogee AD16x (via Digilink) and then to Apogee DA16X.
In Preferences - Audio I have selected TDM driver Only. I am not getting any sound. When it plays an error message comes up 'Error while trying to synchronize Audio and MIDI'
I can get sound using Digicore Audio but am limited to 8 outputs and cannot use my TDM.
Does anybody have a similar setup working? Any ideas on how to get it working?
Cheers
G

We had the same problem.
I remember something like it mattered from partitions on the harddisc.
We found the hint on the Digiforum. After removing partitions it worked.
But sad to say, Logic and TDM don't work really together. There are so many annoying things I would need pages to describe.
I moved now to PT. Boring but working.
Tim

Logical Database QNQ not working when creating a query in SQVI

Hi All,
When i try creating a Quick Viewer Query using SQVI on Logical Database QNQ, I do not get any output.
What am i doing wrong?
Regards,
Jr.

Hi,
The blank row that you get from your second select statement would appear at the end of the report. Put that statement first and it should be at the top of the first page
Andy

(K7T Turbo2) Fuzzy Logic 4 in WinXP not working

Similar Messages

Maybe you are looking for