K7T Turbo2 On Board Sound - Need MIDI drivers

While setting up my first MIDI keyboard accompanied with software I run into this error message:
No MIDI input devices. Instal MIDI input drivers.
I was told to instal them using the Drivers Applet in the Control Panel but I can not find such an Applet.
Brandon

Ah.........
This is very confusing.
I don't understand how an Nvidia driver works with a Realtek chip but I will give it a try. Since we have same board and you are using the driver yourself I can't dispute that it should work. The only thing that leaves me suspicious is the fact that the sound drivers (4.42) that come with 5.10 drivers did not work at all. No sound period.
Also, I want to make sure I get rid of the Realtek drivers and software completely.
#1 I go to add/remove programs and select remove Realtek drivers
#2 I run Drivercleaner and select Realtek and hit start
After I do this though, I can go to Windows directory and there is still a ton of those Realtek "crab looking" files all over the place. I have looked in the start menu for a Realtek entry so I can see if they have included an uninstaller but no joy. I cna not find a directory entry for Realtek anywhere. It seems they just reside in the Windows folder all mixed in with the rest of the Windows files.
Am I being too anal..........?? Is removing through add/remove programs and the Drivercleaner good enough??
I am obsessive/compulsive enough to just wipe the HDD out with 1's & 0's and re-install Windows and then all the drivers again but I got my disk a couple years ago with the barebones I ordered from a re-seller and now Microsoft makes me call everytime to validate which is a huge pain in the ass. Cause I am a quick trigger on the reformat if I muck something up.

Similar Messages

Ms-6330 (k7t turbo2) dead board!

Please I need help with this...
I was installing a new cpu cooler, when accidentally hit a small resistor near the cpu. The resistor came to be the R639.
The board does not post and the D-bracket show all the leds in red!.
The resistor is not completely destroyed, it remains about half of it, giving a resistance of 1kohm.
I need to know if someone has a damaged board of the same type, the idea is to replace the bad resistance with a new one with the same value.
Has someone repaired boards this way?
Any advices well received.

Give the board to a good radio repair shop and ask them to replace the resistor.

MOVED: USB2 & K7T Turbo2 M/board

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=98729.0

Quote
The motherboard has USB2 printed up it about 3 inches up from the pins where you connect the case lights/reset buttons etc.
printed next to the USB pin header? you'll probably find there's another header somewhere further up, that has 'USB1' next to it...
Quote
How do I check my bios settings for usb2 enabled?
it would normally be found in your 'Integrated Peripherals' > 'Onboard Devices' menu

K7T Turbo2 Sound Driver Problem

I just installed a K7T Turbo2 motherboard for my #2 system and am having a problem installing the VIA sound driver. The system freezes up before it finishes the installation and once I reboot the Device Manager says that since Windows stopped responding when trying to start the device, it wouldn't attempt to start it again.
I've tried new drivers (both sound and chipset), tried reinstalling the drivers a few times, made sure the sound card was active in the BIOS, and even removed a couple of extra spacers from under the mobo so I just have them on the four corners. Any other suggestions?
Thanks,
z-man
Windows ME
MSI K7T Turbo2 (ver 5.0)
AMD Athlon 1100
256MB PC133 Corsair
Elsa Erazor-X

I think during the course of trying to get it to work, it requested the gm16.dls file. However, I think I finally got it installed from the Windows disk. Could this still be causing the problem?
Also, I tried out my SB Live! card from my primary system - the drivers installed and the card worked fine. I would prefer not to have to buy a seperate sound card, if I can get the on-board one working.
Thanks again,
z-man

K7T Turbo2 sound not working

The serial number for this board is:
MB VIA KT133A/5p3d K7T Turbo2 MSI
I upgraded my sister's computer for her thinking I was doing her a favor. Anyway.. to make a really long story short... I live in Georgia and my sister lives in Boston. I bought all the pieces (including this mobo I mentioned up above) and a new tower and put it all together. Before I mailed it up to her I hooked it up to my monitor and my boston acoustic desktop speakers. It worked beautiful... no problems. I mailed it out to her and she hooked it all up and she has no sound. I made sure she had it plugged into correct port in the back, and from what she told me she does. I had her go into the sound settings and make sure nothing was muted and nothing was. I even had her go into the device manager to see if there were any conflicts.. and there were no exclamation marks indicating any conflicts.
I thought at first that maybe it was disabled, but that can't be the case since it worked just fine when I hooked it up to my monitor and speakers. Does anyone have any ideas??? She is calling me almost everyday to see if I found out anything and I feel bad, but at the same time she is driving me up the wall nagging me about it. I need to fix it and it's going to be difficult considering I am over 1000 miles away. If I at least had some trouble shooting ideas, I might be able to walk her through it. I would truly appreciate any help.

1) make sure she has the speakers plugged into the right plug in the motherboard
2)make sure she has the power turned 'on' on the speakers

Choppy sound on K7T Turbo2

Putting together a new system for a friend. It is based on the MSI K7T Turbo2 MB. I am using the onboard sound. But when I play back music or video, the sound is choppy. It gets worse when I am doing things on system, like opening files or accessing programs. When I do this, the sound goes into a "slow down mode" as if it does not have enough power to keep up - like it's losing resources.
I am running windows XP pro with athlon xp1800 cpu and 256mb ram.
Any suggestions? I have tried three different drivers so far (one from windows, one from the cd, and one from the website).
Any suggestions would be most helpfull! Thanks!

OK! Just wanted to post back my findings.. as I tried some last few ditch efforts before replacing the board entirely.
Just trying different things moving to hardware, since I didnt think it was software related at this point. I was thinking hard drive, because of the slow down of the sound while doing other things. I was thinking of replacing the hard drive and trying, but I thought I would change the IDE port.
I moved the hard drive from IDE0 to IDE1 .. and low and behold!!! Sound issue fixed!!! Its flawless now. Craziest thing I have ever seen! I still don't know if IDE0 is a bad port or if the system just doesnt like IDE0.. but I dont care at this point.. it works.
*shakes head*

Need help w/ K7T Turbo2 and mobile Athlon 2600+/266

Hi.
I just bought a new Mobile Athlon 2600+/266 and can't quite get it to work right in my trusty Turbo2. It shows up during post as "Unknow CPU 800MHz", which is a little disappointing. (it is stable at this speed, though) My previous chip in this same board was an Athlon 1200/266 (A1200AMS3C), so everything worked at 133/266 before.
I've updated the BIOS to the most recent, checked that J17 is clear, stripped the box down to cpu + hd + 1 stick ram, and still no dice. All of my CMOS voltage/peripheral settings are at default.
The voltage/frequency menu in the BIOS correctly detects the chipset at 133MHz. When I tried to manually bump the freq multiplier to 15x, I actually saw a decrease in reported processor down to "Unknow CPU 733MHz". When I knocked it down to 14x, it dropped proportionally (to 667, I think). This makes me think that the freq multipler is correct at default, and that it's something else that's going wrong. I don't know what, though.
Is the problem that the chip is Mobile? My last guess is to try to up the voltage, but I didn't want to melt anything before checking with some experts.
I'm not looking for overclocking, just to get it running the 2.133 GHz that it was advertised at.
Thanks much,
-Clint
System specs:
Mobile AMD 2600+/266
K7T Turbo2 (latest BIOS)
ANTEC 350W model PP-352X
2x Micron 256MB PC133 (48lc32m4a2)

Does that board have a BIOS setting for FSB, as well as having the J17 jumper? I know a couple people with those boards, but never played in the BIOS to see. It sounds like it is actually trying to use 66MHz X 14, 15 or whatever Multiplier you are setting. Those Mobile chips are not Multi-locked like the normal CPUs are, and may be next to impossible to get set up on these older boards.

Why do I need to keep resetting MIDI drivers in Logic 9.1.1?

I went from Logic 9.1 to Logic 9.1.1 last week and since doing that I keep on losing my MIDI connection. This never happened to me in Logic 9.1. But now in Logic 9.1.1, in the middle of working or any time I come back to the computer after a while I will need to reset the MIDI Drivers in order to get any MIDI back for my master controller. I get no error messages. The MIDI just doesn't show up until I reset the driver. I am using the Unitor interface for MIDI and have the recent Unitor update. Any thoughts on this matter are appreciated.

It's not a Logic problem. I don't think it's a driver problem either, I think it's an OS X problem. This happens to me with other DAWs (different MIDI interface, though). Open up the "Audio MIDI Setup.app" and see if your interface is dimmed when this happens. Clicking "rescan" should enable it again.
I have heard of several people with this problem (not all using Logic), from RME to E-Mu to Presonus, and others. The only thing they all had in common was that they were all USB interfaces.

MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
My spec:
msi K7T turbo2 MS-6330 bios ver 3.6
AMD athlon xp 2000+
Asus v7100 Geforce 2 MX400
2x256 kingston ram(pc133)
2x20g maxtor hdd
1xTV tuner card
1XSb live soundcard

Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

Need sound and webcam drivers for Satellite A660-156

hi all,
my hard disk was physically damaged and replaced by new one. All data and setting were copied.
But I found that no sound and webcam drivers are installed. I successfully had found them and installed, but still no changes. See sound icon with 'no sound' indication, click on it to fix the problem, but no problems have been found.
Offered to see additional info or close the window. On Toshiba website found two sound drivers, but it doesn't help.
Any idea how to fix that problem?
Thnx in advance!

Hmm I think you shoud ochekc if you have installed all the drivers in the right order:
Here is the one which i found in one thread:
1 Windows 7 64bit
2 QFE KB974332
3 QFE KB974431
4 QFE KB974571
5 QFE KB975467
6 QFE KB975806
7 QFE KB978258
8 QFE KB977620
9 QFE KB975777
10 QFE KB972270
11 QFE KB977609
12 QFE KB979099
13 QFE KB978251
14 QFE KB971468
15 QFE KB975560
16 QFE KB977074
17 QFE KB978207
18 QFE KB978506
19 QFE KB978262
20 QFE KB976422-x64
21 Registry Patch for System Restore V1.00.00
22 PlayReady PC Runtime 1.3
23 TOSHIBA Bulletin Board 1.6.07.0
24 TOSHIBA ReelTime 1.6.06.0
25 Intel Chipset SW Installation Utility 9.1.1.1024
26 Intel Management Engine Interface V6.00.40.1215
27 NVIDIA Display Driver 189.58
28 Intel Turbo Boost Technology Driver 1.1.1.1007
29 Intel Rapid Storage Technology Driver 9.5.7.1002
30 TOSHIBA Supervisor Password Utility 1.63.0.9C
31 TOSHIBA HW Setup Utility 1.63.0.22C
32 TOSHIBA Flash Cards support utility 1.63.0.6C
33 TOSHIBA Value Added Package 1.3.4_64
34 Realtek Audio Driver 6.0.1.6069
35 NVIDIA HD Audio Driver 1.0.9.1
36 Broadcom Wireless LAN Driver V5.60.48.35_DrvOnly
37 Synaptics Touch Pad Driver V15.0.8.1
38 TOSHIBA HDD Protection 2.2.0.4
39 Bluetooth Stack for Windows by Toshiba v7.10.10(T)
40 Realtek LAN Driver V7.013.0112.2010
41 Jmicron Card Reader V1.00.44.01
42 ENE CIR Driver (if available) V3.2
43 YUAN DVB-T/ATSC Tuner Driver (if available) 2.3.3.31
44 TOSHIBA Sleep Utility 1.4.1.1
45 TOSHIBA eco Utility 1.2.11.64
46 Intel Proset 13.1.1.0.1.s64
47 TOSHIBA HDD/SSD Alert 3.1.64.6
48 TOSHIBA Service Station 2.1.40
49 HDMI Control Manager 2.0.0.5.64
50 TOSHIBA Remote Control Manager 3.0.1.0
51 TOSHIBA PC Health Monitor 1.6.0.64
52 TOSHIBA Fingerprint Utility 1.0.2.27
53 ConfigFree 8.0.29
54 TOSHIBA Web Camera Application V1.1.1.15
55 TOSHIBA Face Recognition 3.1.3
56 TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-7
58 PatchFiles PCIIDEREG-1.1
59 PatchFiles TosVolRegulator_x64_1.1

Need help with T-bred on K7T Turbo2????

I just got a K7T Turbo2, the one that supports all the way up to XP2600+ 266FBS cpu's.
and I am trying to use a XP2100+ T-bred "B" in it.
and I can not select 133FSB.
every time I try it defaults back to 100FSB, heck I can select, pretty much any multiplier, but they are not right.
if I pick 8X I get 16X, if I select 13X i get 20X?????
it wont detect the cpu correctly and I cant select the correct settings manually.
I flashed to the latest bios already, and it does this with either bios.
It must be something simple, I just have never had a MSI board before and dont know my way around the bios very well yet???
Thanks for any help ahead of time.

I knew it was something simple, it has a 100/133FSB jumper J17 I have to set to 133FSB, DUH!!!
This is the first KT133A board I have had that you cant do this in the bios.
oh well no biggie.
will change it when i get home.
and I found a 16X and a 20X multiplier so hopefully thuis thing will run my T-bred at 2.4GHZ of more and 150FSB or more.

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Newbie ? Are these settings normal for K7T Turbo2?

Greetings All,
First I would like to say I really enjoy this forum. I have learned much. Also I would like to say that I am fairly new at putting together systems so if my questions are basic please forgive me. Thanks for your patience and your willingness to teach. OK, here is my system and my questions:
K7T Turbo2 v.5
Duron 800
2 sticks 128meg = 256
PSU Sparkle 300w; 150w combined (according to sales slip)
Asus 7100 Geforce 2mx 32 meg
SB 128 pci sound card
Western D 80gig special
Acer 52x CD
LiteOn 48x12x48
Win 98se
Most curent VIA drivers
I think that about covers it.
The questions:
1) I have seen a lot of discussion about voltage seetings so I am wondering if mine are normal? They are as follows:
Vcore = 1.55v
5v = 5.05v
3.3v = 3.27v
12v = 11.60v
2) This may need to be in the BIOS group but what are the optimum seetings for this board and my stuff?
3) When I boot up I notice that just about all my hardware is using IRQ11. Is this normal?
4) A while back I saw a lot discussion about ACPI. Is it best to use it or not? If you turn it off do you have to reload your OS?
I think that about does it for now. Thanks again for your help.
Dave

Ian,
Not that I am very technical and do sometimes get mixed up in my own settings...
I got a canon A1 and use the easy set up for HV 1080i50 on interlaced footage
and 1080p25 for the '25f' footage. When using the de-interlaced filter I hit the
upper field and I am having a major headache from time to time with sequence
settings and field dominance in particular with interlaced footage but do experiment
quiet abit to my even larger frustration. I do find the '24f' frames quite pleasant to
look at - maybe it is just because it is easier to work with I dont know, but interlaced
got a reputation of being difficult.
Likewise as far as I am aware then the '25f' canon setting is as good as progressive
some will even say 'same'. check out more here
http://www.dvinfo.net/conf/forumdisplay.php?f=138
Henrik

Installing XP Pro on MS-6330 (k7t turbo2)

Im having oodles of problems installing Xp pro (and even win 98) on my computer. My current setup is:
K7T Turbo2 (latest revision, with 3.5 bios)
Athlon XP 2000+
40 gig maxtor hd
hercules gamesurround fortissimo 2
Visiontek Geforce 4 MX 420 AGP
10x dvd rom
12x8x32 cd-rw
intellimouse optical (in ps2 mode atm)
standard keyboard
generic 512 pc 133 sdram (tested with various memory test, including mem86 or whatever that was called, hehe) no errors, works perfectly
Problems arise when installing xp pro (and xp home) when at the point where it says: starting windows ... then either it reboots, blue screens, with errors like: page fault in non page area, or usb.sys or something, so ive disabled usb, etc etc...
I already tried swapping out everrything from video to sound, etc, those tricks DO NOT WORK. Already tried using various settings in the bios, already tried mem timings, setting agp to 4x, or 2x, auto, manual and EA, etc... nothing seems work...
The only thing that DOES work, is disabling the internal cpu cache..why? BEATS ME?!? After its done loading hte main stuff, Im going to reinable it and see how it goes.. im tired of problems, I like the mobo, but Was having problems from the get go installing xp.. im reinstalling it now, since i was getting errors like irq_not less, that thingy there, and then stuff like ntfs error on a bsod, etc. Installed the 4 in 1's, 442's then 443's, didnt work...psu isnt really an issue, has 220 tco, and runs fine, hard drive is not damaged, neither are the other optical drivers, and im just at my wits end.. this is really starting to tick me off..
emailed msi tech support, nothing back yet... can someone PLEAES HELP!?!? What bios settings should i use for xp pro installs and stuff?? lemme know! Thanks!!! And should i REALLY reinstall service pack 1? any thoughts on this??

WEll shite, now i gotta kill 98, cause now IT aint even working...... this board sucks! Im having more problems than a ECS mobo on a good day.
Now what, ive stuck my voodoo 3 in, and im fudgin with the settings, but quite frankly, im sick of all this, if it dont work, its going back and that pc shop is gonna fix this
and heres that farking problem with xp now..
IRQL_NOT_LESS_OR_EQUAL
!?! AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH!
*hair goes blonde, and turns super geek 5*

K7t turbo2/amd XP 1800! ack! help!

i recently bought a k7t turbo2 (ms-6330) to go with my amd xp 1800, im running 2x 512 and 1x 256 ram under winblows ME. and ever since day 1, i have random lockups when i try to move or copy files in windows, but if i use dos-prompt i can transfer files just fine... also when i try to shutdown or reboot i get error from windows. i have tried underclocking the cpu, swapping out the ram... i have installed all the most current drivers for everything and i am clueless what else to try... i got a 300w amd certified psu, 20gig maxtor along with a 20gig seagate for drives. i have disabled the onboard sound as well as the printer/serial ports... i run bare bones windows setup with no junk in the backround... have 3 case fans and amd certified cpu fan so i have eliminated temp problems, it happens whether the machine is warm or cold... i even tried upgrading the bios to 3.5 to no prevail... i have no issues running any of my games from halflife to quake to diablo to everquest... other than these 2 isuues, my systems just blazes with no issues...
any ideas?

Yank out some of that ram, like the 512k stick and then try it out . ME doesn't need all that to function. BIGDADDY51CT.USA

K7T Turbo2 On Board Sound - Need MIDI drivers

Similar Messages

Maybe you are looking for