K7T266 Pro (MS-6380) Not Recognizing 1GHZ AMD

I've got an ATX motherboard with an AMD Athlon 1.GHZ processor and my bios only recognizes it as a 700MHZ. Windows XP also recognizes it as a 700MHZ. What is the problem??? I shouldn't have to flash the bios, because the inital bios was able to handle up to 1.4GHZ. Any ideas people? email me at [email protected] please for any suggestions!!! Thank you!!

I will look and then post the specs...it's my dad's PC across the room from me in our office...I'm the computer geek in the office and this is the only problem that I've not ever been able to solve. We bought the MB and CPU both new and had them professionally built by our people who build our customs machines. I honestly never noticed that it was running at 750MHZ until about three weeks ago...and we've had his PC for about 2 years or so. It's a 1GHZ CPU, and I'm not sure how much RAM he's got, but I'll check and edit this post. Thanks for all the help you guys.
UPDATED SPECS:
512 MB DDR RAM
250 Watt Power Supply.
1GHZ Processor.
PROBLEM:
Windows XP along with the BIOS recognize the processor as a 750MHZ...also can't change fsb to 133 or else the PC won't start up--it has a multitoned beeping noise instead. Any further suggestions?

Similar Messages

K7T266 Pro (MS-6380) v1.0 with IBM 180GXP/180 GB drive

Hi,
I'm thinking about buying one of the new IBM Deskstar 180GXP hard disks and I'd like to go for the 180GB version.
Question is, wether my board K7T266 Pro (MS-6380) v1.0 with latest bios v1.9 will support the large drive 100%.
I read in the changelog for the bios about the support for the Maxtor 160 GB drive but is somebody actually using a disk larger than 128 GB, that might require 48 bit adressing with the MS-6380 (it's the old version 1.0 I'm talking about) and has more than 137 GB on data on it without noticeable problems? I couldn't find any info about this in the forums or on the net.
Thanks in advance for your help.
G. Freeman

Hello Assaf,
Thank you for your note.
Just for the archives: I bought the 180GB IBM-disk and it's working without any problems. The 1.9 BIOS is fine and Windows recognizes the drive as well. Only thing I had to do was to update the VIA 4-in-1 drivers and enable Big LBA support in Windows 2000, as described in Microsoft Knowledge Base article #305098. After a reboot Windows recognized the complete disk (before only ~128 GB).
After some hours of testing (bit by bit writing and reading on the whole disk and some 'WinBenching') I installed Windows 2000 and it's running very well so far.
Anyway, others might be better off with an IDE controller for Windows 98/ME or NT4.
G. Freeman

K7T266 Pro (MS-6380) Issue

Hello all
This problem has been bugging me for quite some time now;
When I start any Games/movies/Dxdiag or something similar that is beeing used by my GFX card my pc hangs up and afterward it reboots. When I boot up agin in Windows it says that my GFX card was the reason why the system rebooted
My Computer specs are:
nVIDIA TNT2 Riva vanta 32mb
512 MB DDR RAM pc 2100 (Have tryed memtest86)
AMD 1500+
K7T266 Pro (MS-6380)
Regards
Thomas

Had the same trouble with my old card. The thing wont work on new motherboards with the latest nvidia drivers because the AGP port speed is too fast for the card. You can fix it by disabling the vertical sync but that just makes the system unstable. Roll back to the 46 driver, I think that's the one dated october 2003. That driver seems to work good with those cards or use the original driver it came with. If you still can't get it to work it might be a good idea to look at updating to a video card that can handle 8x AGP.

MSI K7T266 Pro(MS-6380) AND Gf4 ti4600

Just recieved a Albatron gf4 ti4600 card. The computer won't boot. The card booted perfectly on a friends expo kt266a motherboard. But the card won't boot on any of my two pc's. We have tried his Enermax psu, we have tried everything. Are there any possible solution? Is there any other who has had problems with MSI K7T266 Pro(MS-6380) and gf4 ti4600 cards? we tried his Point Of View gf4 ti4200 XP card on mine and it worked.

?(
I' have the same problem with a GeForce4 MX440 !
My computer send 8 beeps and...nothing. When I retry 3 ou 4 reset, it boot and all is OK with Windows XP.
It seems there is a voltage problem with AGP slot. I post 2 mails to MSI France but they don't answer at this time...

Help! Can't overclock via CPU Ratio (multiplier) with K7T266 Pro (MS-6380)?

I have a Athlon 1.2 GHz (266 MHz FSB) that I'm trying to overclock via the clock multiplier on my K7T266 Pro (MS-6380) mobo.
Right now the CPU ratio is set to Auto in the Hardware Monitor in the BIOS, but I know that it's using a clock multiplier of 9 (9 x 133 Mhz = 1197 Mhz, which is about 1.2 Ghz)
The only way that I can overclock this CPU is by increasing the FSB above 133 MHz. That works, but I'd like to avoid that as the USB no longer works when the FSB is past 138 MHz (i.e. I can't OC higher than 1242 MHz through the FSB)
If I set the clock multiplier above 9 (ex: 9.5, 10, etc.) nothing happens. I reboot and my CPU is still at 1.2 GHz. Its as if I can't OC by increasing the CPU ratio. I'd like to set it to 10 and run at 1.33 GHz but I can't. Why is that?
If I lower my CPU ratio below 9, then the computer freezes up totally at bootup and I have to clear the CMOS to get it working again.
THANKS!

Hi,
You need to unloack the CPU, search google for closing L1 Bridges, then you can set it to anything you want

Install error during make of Pro*/C++ - file not recognized:

Say, anyone seen this error during install? The file or directory "proc" is indeed missing... is this a known shortcoming of this release? Can these make errors be ignored?
Thanks in advance
Dennis
Starting install Link Phase of component Oracle Internet Directory Client Common Files
Starting install Link Phase of component Required Support Files
Starting install Link Phase of component Oracle Code Editor
Starting install Link Phase of component Oracle Database User Interface
Starting install Link Phase of component Oracle Ultra Search Server Rdbms
Starting install Link Phase of component Enterprise Manager Minimal Integration
Starting install Link Phase of component Object Type Translator
Starting install Link Phase of component Pro*C/C++
Calling Action unixActions10.1.0.3.0 make
     installMakePath = /usr/bin/make
     installMakeFileName = /app/oracle/OraHome_1/precomp/lib/ins_precomp.mk
     installTarget = relink
     installArguments = ORACLE_HOME=/app/oracle/OraHome_1,EXENAME=proc,
     undoMakeFileName = null
     undoTarget = null
     undoArguments = null
     logFile = /app/oracle/OraHome_1/install/make.log
     progMsg = Linking proc
The output of this make operation is also available at: '/app/oracle/OraHome_1/install/make.log'
Start output from spawned process:
Linking /app/oracle/OraHome_1/precomp/lib/proc
/app/oracle/OraHome_1/lib/s0main.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
/bin/chmod: failed to get attributes of `/app/oracle/OraHome_1/precomp/lib/proc': No such file or directory
make: *** [app/oracle/OraHome_1/precomp/lib/proc] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Exception Severity: 1
*** Cancel Dialog: ***
User Selected: Stop installation of all products.
Exception handling set to prompt user with options to Retry Ignore
User Choice: User selected to stop installation of all components.
Error in invoking target 'relink' of makefile '/app/oracle/OraHome_1/precomp/lib/ins_precomp.mk'. See '/app/oracle/oraInventory/logs/installActions2005-07-04_09-24-38AM.log' for details.
Unable to read the list of homes from the inventory.

If your library is in the standard layout of an iTunes folder containing an iTunes Media folder (and you've already copied over the media) then you can simply copy the iTunes library files and album artwork folder across to the new machine recreating the same layout. If the media folder has been split out from the main iTunes folder then see make a split library portable for a way to get the library into a portable form, after which you can copy over the library files.
tt2

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

MacBook Pro 2007 battery not recognized, not charging but working

I recently bought a new battery for my MacBook Pro 2007. As said in the title, it seems to work alright, but it's not recognized by the computer (X in the battery icon), and I don't think it's charging.
I tried to reset the SMC, no change. Unfortunately, I don't have any other computer to test my battery and my powercord on, to see if it's coming from either one of them. And I don't have an Apple Store around.
Do you have any suggestions ?

MacBook, MacBook Pro, MacBook Air: Battery not recognized after being fully drained

MSI K7T266 Pro (MS-6380) with Athlon XP 2000+ Thoroughbred

...I used search, but I couldn't find anything compared to my problem... maybe someone can help me... ok... the problem...
My hardware: This is the motherboard I'm talking about (MSI K7T Pro (MS-6380)). And the processor is Athlon XP 2000+ Thoroughbred A.
This processor in not on the supported CPUs page. But someone told me then it is maybe still possible to get this motherboard and this CPU to run correctly. Maybe with a special BIOS update or something.
Does anyone knows something about that?

I agree that if it can run a 1.4 as far as power it should run a 2100+. It appears that the multiplier is there as it should support up to 15x. I think it would work as it is only another 66mhz, you might however have to use beta bios VA1.6 . My mb will recognise my cpu as a 2200+ when O/C high enough, but my MB only support 2100+ yet tables are there for supporting the cpu.
I think like most of the issues MSI knows that it can work but is worried for some reason or another of components being damaged so they will not officially support. It might only fail in 10% or maybe less of the cases but thats enought to stop MSI, Is that enough to stop you?
Than again it is only 66mHz I doubt you'd see the difference, Is it worth the trouble? I wouldn't chance it for 66mHz you could easily O/C to that speed, actually faster.
Good luck

Solaris 10 on x86 Integrated Intel PRO/100 VM not recognized

I just installed Solaris 10 on a compaq evo 510 and the adapter is not recognized. I did not get any network config questions during the install. I have ran sys-unconfig and same thing. I typw ifconfig -a and I only see the loopback. Any help would be greatly appreciated. I am very new to the unix environment. This card appears to be on the HCL and I have searched everywhere and tried many different things to no avail. thanks in advance.

For booting Arch you will need to update bios in ThinkPad 600E.
http://download.lenovo.com/ibmdl/pub/pc … sdin36.exe
After that, you will be able to boot from cd without any problem, but problem with network is still persistent. There seems to be some issue between PCMCIA interface and sound on ThinkPad 600E, but I still havent found a way to fix it.

K7t266 Pro Ms-6380 + Western Digital 160gb

Hi there.
I have a MSI K7T266 PRO V1.0 motherboard with the 1.9 BIOS version.
I wanna buy an Western Digital 160 GB hard drive. Did anyone know if the motherboard can detect it succesfully (because of the 137 GB barrier).
Has anyone been successful in this operation? ... The BIOS version said the 137 GB barrier is broken.
BUT ... I REELY, REELY, REELY NEED TO KNOW IF IT'S TRUE AND IT'S ACTUALLY WORKS FINE....
Thanks to everyone.
Q Inc.

if it supports one 160 gb drive it will support any size drive by any maker
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=27&kind=1

K7T266 Pro (MS-6380) safe BIOS-upgrading?

I'm still using BIOS v.1.0A for my K7T266 Pro... I guess...
So what's the safest way to upgrade to V1.9?
I'm unsure about flashing... and cant afford any comupter-failure for the moment (thou I want a bigger harddisk)!
Any suggestions? /Stefan

Best way is to follow the instructions to flash using 2 floppy disks. One will have the windows98 startup files the second will have the flash program and the update itself. Just make sure you copy the flash util and the update over to the temporary drive it makes. Also if you have a UPS (universal power supply: battery backup) it would be benifical to hook it up just in case the power goes out.
Just make sure you read the stickies in the bios section of the forum and if you have any other questions feel free to ask. It is always a risk to flash your bios, but it is also a risk everytime you get into a car. You just want to be well informed, before you attempt this, just like you "should" be with driving a car.
Good Luck
Jeremy

Yoga 2 Pro Hard Drive not recognized

I got my Yoga 2 Pro as a Christmas present and have had issues with the computer recognizing the hard drive every time it boots up or enters sleep mode (and this is after the 1 initial boot up where I didn't have to enter the BIOS). Not sure if this is a bios or hardware issue, but I can get it booted after entering the BIOS, changing various (seemingly random) settings (UFEI/Legacy support usually) to get the computer to even recognize that it has a hard drive installed at all. Once it does boot, as long as it doesnt sleep or shut down, it'll continue to work, leading me to think this is some sort of BIOS issue. Has anyone been able to resolve this issue without the hassle of returning it to Lenovo an getting a whole new one? The computer is great, when it boots up, but this is extremely disappointing/frustrating to have to enter the BIOS every single time I want to turn the computer on to use it!

@Lenovo Support - Please respond to this issue.
SO MANY PEOPLE HAVE FACED THIS ISSUE & ARE STILL FACING - BUT NO RESPONSE FROM LENOVO SUPPORT...... !!!!

Macbook Pro (Early 2011) not recognizing Apple Magic Mouse

OK, so I recently bought a MacBook Pro (Early 2011 Model) and I cant get my Magic Mouse to connect to the Bluetooth. This laptop is used, but I bought it from a Apple reseller and they told me that it was refurbished and that there should not be anything that is not working. Anyways, when I turn on my Apple Magic Mouse and go to Bluetooth or Mouse in the System Preferences, I don't see anything at all just the loading circle. It will not appear. I have tried doing the trick of holding Command+Option+P+R on startup like some people have suggested but that doesn't seem to change anything. I also brought it to the Apple store and the associate connected the mouse to one of the computers there, so I know that my mouse is working. Is there a way to tell if the Bluetooth in my laptop needs to be replaced? if so, can it be replaced easily without a big cost?

Hi kbridea1,
Welcome to Apple Support Communities.
It sounds like your MacBook Pro isn’t recognizing your Magic Mouse but other devices are able to recognize it. The article linked below provides a lot of great troubleshooting suggestions that will resolve most issues like the one you’ve described.
Troubleshooting wireless mouse and keyboard issues
I hope this helps.
-Jason

HP Officejet Pro 8600 Plus Not Recognized On The Network

I have a CenturyLink DSL Modem/Router that has 4 ports on the back. I use Port 1 on the DSL Modem/Router to conntect to my NetGear Router. I use Port 2 on the DSL Modem/Router to connect my HP OfficeJet Pro 8600 Plus printer. I use Port 3 on the DSL Modem/Router to connect my Brother MFC-7360N printer. I am not using Port 4 of the DSL Modem/Router.
My NetGear Router is used to connect all wired desktop PC's (5) in the house.
I was able to successfully install the software for the Brother printer on all computers and can print on the Brother printer from any of the desktop pc's.
I have the software for the HP printer installed on all computers but on the WIN XP desktop pc I cannot detect the printer on the network. During the setup process the software detects that the HP printer and the WIN XP pc are connected to two different routers (the DSL Modem/Router is being detected as a router by the WIN XP pc). On the other desktop pc's which are running either WIN7 or WIN8 there is no detection problems even though the printer is connected to the DSL Modem/Router while the PC is conntected to the NetGear Router.
Does anyone have any knowledge as to why I am having this problem. The problem seems to be only with the WIN XP pc and not with the WIN7 or WIN8 pc's.
This question was solved.
View Solution.

You are running a double NAT scenario, not good. Simple fix, put the gateway unit (modem/router) in bridge mode, which will disable the router functions and just make it a modem. Now connect the Netgear router to the gateway unit and have this handle all your wired and wireless connections.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

K7T266 Pro (MS-6380) Not Recognizing 1GHZ AMD

Similar Messages

Maybe you are looking for