K7t266 pro with pc2700 RAM

is this ok?
cause pc2700 ram is actaully eaiser to find and infact cheaper not sure why..
but will it be ok with my mobo? do its a kingston brand
also kingston only sell cas 2.5 right?
thanks for the help

Most actual boards need pc2700 so more pc2700-ram is produced than pc2100.
Pc2700 should work on your board but prearrange the chance of exchanging it with your dealer.

Similar Messages

Downloading Mountain Lion on Mac Book Pro with max RAM and after 20 hours only 1.50Gb downloaded of 4.37GB. What gives?

I have a MAC Book Pro with maximum RAM added and tried to download Mountain Lion and after 20 hours only 1.50GB downloaded of 4.37GB. Very slow and set my machine not to sleep overnight or anything. Should I give up and stick with my snow leopard?

I think that since Apple just released the Mountain Lion 10.8.2 Update and iOS 6, their download servers are being somewhat overloaded. It may pay to try again in a day or two after things calm down a little. It also depends on where you live and how fast your ISP download speeds are.
Hope this helps

Mac Book Pro with 8gb RAM

Can I have my ran upgraded at a local Apple Store? Or the only way to buy a Mac Book Pro with 8gb RAM is online?

In Milan, Italy, they did for me at the Apple Store.
They took out the original 4GB and installed 8GB. the 4GB were discounted at full price because I did it before going out of the store. If I remember correctly -200€ for the 4GB and +400€ for the 8GB. This means 200 €
At the end is practical but may be more expensive if you discarge the 4GB and install non Apple 8GB, but this may invalid tha garanty... I am not sure about it but I prefer to stay on the safe side.
The difference could be not much. May be you find 8GB for only 140 - 160 € but it will be difficoult to get more than 40-50 for the 4GB even if they are really new.

I am using a MacBook Pro with 16GB ram. PS opens but I cannot get any files to open. I need some h

I am using a MacBook Pro with 16GB ram. PS CS6 opens but I cannot get any files to open. I need some help please

What files? How do you try to open them? From where? What else can yyou tell us? You need to provide more info.
Mylenium

K7T266 Pro with Award Bios (Change FSB)

Hi,
I've got an old motherboard and i would put on it an athlon 1400 processor.
I have installed it correctly on the motherboard but the fsb is equal to 100 mhz.
I would set it to 133 mhz because the processor runs at 1050 mhz... (10,5 * 100)
With the Ami Bios, it's easy to change the fsb but with Award Bios, i don't know how change it ...
I have verified the bios version with MSI Live Update and i have got the latest version ...
How can i do to change the fsb on my motherboard ?
Thanks in advance.
Regards.
Kris

Which mainboard you have? ==> http://global.msi.com.tw/index.php?func=searchresult&keywords=K7T266+Pro
"With the Ami Bios, it's easy to change the fsb but with Award Bios, i don't know how change it ..."
?? They all are using AMI BIOS.
"I would set it to 133 mhz because the processor runs at 1050 mhz... (10,5 * 100)"
Show us which board you have 1st.

Mac pro with 16GB RAM for CS3? CS3 cant use more than 3 GB? why

hi
does it make any sense to buy 16GB RAM for a mac pro
only for working with CS3?
i am retouching prof. and in the moment we run CS2 on the mac pro.
later CS3 is in the pipeline.
we ordered 16GB RAM in order to work with HDR images and big file sizes coming from hasselblad h2 and h3 (300dpi, 23 x 23inch, round 50 or 100 layers, filesize 1 - 2GB per image.)
thanks

found this article @ adobe website
thanks for your help!
"When you run Photoshop CS3 on a 64-bit operating system, such as Mac OS X v10.4 and later, Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
The default RAM allocation setting in Photoshop CS3 is 70%. These settings should be optimal for most users. To get the ideal RAM allocation setting for your system, change the RAM allocation in 5% increments and watch the performance of Photoshop in the Activity Monitor. You must quit and restart Photoshop after each change to see the change take effect.
The available RAM shown in the Performance preferences has already deducted an amount that is reserved for the operating system from the total RAM in your computer. You shouldn't set the percentage of RAM to be used by Photoshop to 100% (unless you are using more than 2G of RAM) because other applications which run at the same time as Photoshop (for example, Adobe Bridge CS3) need a share of the available RAM. Some applications use more RAM than you might expect. For example, web browsers can use 20-30 MB of RAM, and music players can use 20-50 MB of RAM. Watch the Activity Monitor to view the RAM allocations on your computer.
Watch your efficiency indicator while you work in Photoshop to determine the amount of RAM you'll need to keep your images in RAM. The efficiency indicator is available from the pop-up menu on the status bar of your image or from the Palette Options on the Info Palette pop-up menu. When the efficiency indicator goes below 95-100%, you are using the scratch disk. If the efficiency is around 60%, you'll see a large performance increase by changing your RAM allocation or adding RAM."

XP Pro with 256mb Ram Install Failure

Trying to install on a 1 ghz Celeron with 256mb of Ram XP Pro service Pack 1
Error
"requires a minimum of 256 MB of physical memory(ram) to function properly. your system has insufficient physical memory"
Total bytes available to programs (Conventional+Upper) : 671568 (655.8K)
Largest executable program size : 630816 (616.0K)
Largest available upper memory block : 38352 ( 37.5K)
1048576 bytes total contiguous extended memory
0 bytes available contiguous extended memory
941056 bytes available XMS memory
MS-DOS resident in High Memory Area

The issue of graphics cards taking up memory and therefore reducing the available memory to the OS has been discussed in a few other threads in this forum.
See 256mb install issue as well.

KT3 Ultra2 with PC2700 ram....

How do I make full use of the PC2700 with an Athlon XP 2000+? I'm using Samsung memory so it should go like the clappers...should I just set the fsb to 166 and keep memory timings to SPD. I can enable T1 command quite happily, but should I up the voltage to 2.8v?
Thanks in advance,
John

set your ram to run at 333 with aggressive settings thats about all you can do...if you put the fsb to 166 taking your cpu is unlocked that would be better cause your ram and cpu would both be running at 333

Q: Ordering Macbook Pro with 1x2G RAM

Is it possible to order a Macbook Pro 17" with one 2G RAM card (and buy the second from Crucial.com)? At the Apple Store website, I can only select either two 1G cards or two 2G cards.
BTW, I know that the 4G upgrade from Crucial is still cheaper than the extra 2G from Apple, but I'd like to save even more.
Thanks, Ralph

No. The reason, as I understand it at least, is that due to the 800MHz front side bus and the fact that 667MHz RAM is used, 2 DIMMs are required.

MS-6309 Ver 5.0 (694T Pro) with 1GB RAM

I just got MS-6309 Ver 5.0 (694T Pro) to replace old one.
Everything works fine except when I am using 2 X 512MB RAM. The system work well with eiather one of them but data get corrupted when both are in use.
It happens with Windows XP Pro and Win98SE as well.
Any suggestions how to solve this problem?

98 se does not like over 512 mb unless messed with
http://www.techadvice.com/specs/answer.asp?aid=182
are they same make and model

My macbook pro with 16GB ram runs out of application cache very often, and only application running is FIREFOX MOZILLA. How to fix this?

This happens 2 or 3 times a day - every couple of hours. Then, I need to restart the laptop and clean out files (I use ccleaner). Is there a way to fix this ( system running out of application cache). Thought 16 GB ram would be big enough. Thanks for your help.

For some time now, a lot of Mac’s with Microsoft programs have been
crashing. Check with Microsoft / Mac support sites.
What add-ons are you using?
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

Can't set fsb clock (k7t266 pro )

Hi there,
I hope someone of you gurus is able and wanting to shed some light on my problem:
I replaced the duron 700 on my k7t266 pro with a xp2000+
(palomino). When I want to change the fsb clock in the bios
I can't. It stays 100Mhz
I upgraded the bios with ver 1.90, and disabled bios prot.
What is it that I'm doing wrong?
TIA

should i try a lower version of the bios?
In the bios setup menu i don't have the possibility to load
high-performance settings ( that option isn't there).
But maybe that is correct in ver 1.90
thanx

K7T266 Pro and XP200+

I tried to upgrade my K7T266 Pro with an AMD 2000+ CPU and was unsuccesful.
I first upgraded to BIOS version 1.8 (which the MSI site said would allow me to use this CPU) and then installed the CPU. I heard what sounded like the BIOS trying to Post, but no video showed up on the monitor and the system just stopped.
My system worked just fine when I re-installed my old 1.2 GHz processor.
Any suggestions would be welcomed.

Good question. I saw nothing listed on the package and I had trouble trying to track down that information on the AMD web site. I was under the impression that all 2000+ XPs were palaminos, but your question intimates that that may not be the case. If you know of a direct way to determine if the CPU is a palamino or not I would be grateful for the information.
I went through the very thorough checklist that Bas had posted (great effort on his part) and everything cleared, including the power supply unit. I guess all that would be left is an incompatible core.

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics. Is it possible to upgrade the RAM and the graphics card?

I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?

The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

Is it possible to upgrade the 10.5.8 OS on a MacBook Pro with a 2.4 GHz/Intel Core 2 Duo with 2 GB of RAm to the latest OS?

Is it possible to upgrade the 10.5.8 OS on a MacBook Pro with a 2.4 GHz/Intel Core 2 Duo with 2 GB of RAm to the latest OS?

The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...
Next... Check that your Mac meets the Requirements for Mountain Lion.
Upgrade to Mountain Lion
With Regard to ML... Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Lion and Mountain Lion...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

K7t266 pro with pc2700 RAM

Similar Messages

Maybe you are looking for