K7T266 Pro2-A USB Drivers...

Hi,
I have the K7T266 Pro2-A Motherboard, I am having some problems with my USB deviced, mainly my printer. I will be in the middle of printing a large file (A 710 MB Photo) and the USB will just disconnect between the printer and the computer..
I wanted to see if there were updated USB drivers, but I didn't know which one to install, If any.. Here's what i found:
NEC USB 2.0 Driver
Support model K7T266 Pro2-RU (MS-6380 Ver2.0), 845 Ultra-ARU (MS-6398)
Description
Add General ID: VEN_1033&DEV_00E0
-- Driver version: 2.0.3300.20300.
For K7T266 Pro2, this driver must be used together with BIOS Ver3.3 or after.
Date 2002-9-19
Your System OS Win98SE/ME(79KB) 2000/XP(7011KB)
VIA USB2.0 Driver
Support model KT3 Ultra2(MS-6380E)
Description
For VIA based board with VT8235 southbridge chipset
Note: This Driver only for VIA based board with VT8235 southbridge chipset, please DO NOT use on other models.
Date 2002-9-19
Your System OS Win98SE/ME(168KB) 2000/XP(7011KB)
I Don't know if either of those are correct, or not. MSI makes it too confusing having a whole list of different motherboards with the exact same model # (IE: MS-6380) and only using different sub-model numbers.. Its really dumb..
Neither of thease showed up on my Live Update 2..
Thanks..

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_list.php you are mose likely looking at the USB2 driver not being installed. Scroll down to the NEC USB 2.0 Driver section and read there. The driver is also there.
Matt

Similar Messages

K7T266 Pro2 USB problem

hello!
I Have a K7T266 Pro2 mainboard, but I can't get the USB to work. I have changed the settings in BIOS to
USB Controller :ALL USB Port
USB Legacy Support :ALL Device
The computer finds the ports but when I try to install the drivers it doesn't work, a message shows up were it says that the hardware couldn't be installed. It looks for a files called usbhub20.sys in C:\WINDOWS\System32, can it be somethng wrong with the drivers?
or what do you think it is?
I also checked out my mainboards homepage, and there they have drivers for NEC USB 2.0 Driver. But it also says that win xp users only need servicepack 1, but I allready have that
/Mike
Win xp home
AMD XP1600+
K7T266 Pro2 mainboard
Servicepack1

I would not select the USB Legacy support option. I have a K7t266 pro - RU and have all USB ports working including those on the Hercules Game theater with the drivers that come with the mobo.
Quote
Originally posted by packyard
hello!
I Have a K7T266 Pro2 mainboard, but I can't get the USB to work. I have changed the settings in BIOS to
USB Controller :ALL USB Port
USB Legacy Support :ALL Device
The computer finds the ports but when I try to install the drivers it doesn't work, a message shows up were it says that the hardware couldn't be installed. It looks for a files called usbhub20.sys in C:\WINDOWS\System32, can it be somethng wrong with the drivers?
or what do you think it is?
I also checked out my mainboards homepage, and there they have drivers for NEC USB 2.0 Driver. But it also says that win xp users only need servicepack 1, but I allready have that
/Mike
Win xp home
AMD XP1600+
K7T266 Pro2 mainboard
Servicepack1

USB drivers for Win XP K7T266 Pro

Hello,
i was wondering if someone could direct me to the Windows XP professional drivers for my USB ports. I am using a MSI mainboard with the VIA K7T266 Pro chipset. Whenever windows restarts it attempts to install the drivers. It says that the "data" was "invalid". I have tried downloading the service pack and it did not recognise the USB drivers and i cannot download these drivers from the MSI site manually. I have also tried using the live update function on the MSI site.
Can i get another round of applause for windows XP! what a great product!!! :(
Please help....i need to install my new USB modem and its driving me crazy.
Thanks

Hi,
It depends on the type of board you have.
If it's the K7T266pro V1 then you better buy a PCI USB card as the ports give problems at 133FSB anyway.
If it's the K7T266pro2 V2 then you need indeed SP1 for XP and let the ports redetect.
The V1 board has a serious USB problem at FSB133 and can't be solved by BIOS or drivers.
Only a PCI card or lowering the CPU-FSB can solve it.
The V1 board is very old and only a few have been sold a long time ago and was quickly replaced when the problem was discovered.

K7T266 Pro2-RU and Promise FastTrak100 RAID Drivers

Hello
I am trying install my 2 new Seagate HardDisk in the IDE RAID on my K7T266 Pro2-RU motherboard without success.
MotherBoard's IDE RAID BIOS can see the two 160GB HDD that I have installed and Windows XP can not see it with the lastest BIOS v3.7 and the lastest Promise FastTrack IDE RAID Controller ( v2.0.90 Build 10 ). Both HDD are not detected by Windows XP by using F6 key, However my 2 40GB HDD are detected by Windows XP without problems.
I have 2 K7T266 Pro2-RU motherboards and they have the same problem, I think that the really the problem is the fasttrack.sys driver Could be it updated ?
Does anyone have new Promise Drivers for Windows XP ?
Cheers.

Yes I do, I have used that drivers for many time and they are very old in this moment because Seagate Barracuda 7200.9 160GB are not visible, only my IBM DeskStar 40GB works fine with that drivers.
I have tryed to use the last fastrtrack.sys v2.00.0.25 from Promise Technology without success which has support to large HDD above 137GB and needs BIOS update to my motherboard v2.00.0.24 in FastTrack (tm) "Lite" BIOS v2.00.1030.23.
http://www.promise.com/support/download/download2_eng.asp?productId=15&category=driver&os=0&go=GO
I have installed Windows XP SP1 in my IBM DeskStar 40GB on IDE3-RAID and works fine, later I have installed another HDD Seagate 160GB on IDE4-RAID and Windows XP can not see it.
Later and I have put the new fasttrack.sys (v2.00.0.25) driver in Windows XP and with a reboot machine, Windows XP can see my new HDD160GB HDD like a 149.05GB unpartitioned drive ( which is corret ). When I put the old fasttrack.sys driver Windows again can not see the 160GB HDD
Later I going to install the Windows XP SP1 in the new Seagate Barracuda 7200.9 160GB and the IBM DeskStar 40GB by using F6 key and neither HDD were visibles. So I can not continue with the installion
Later I going to install WinXP again with the old drivers and once again only IBM 40GB is visible.
I need your HELP MSI Support Team.
Thanks in Advanced.

K7T266 PRO2 (MS6380 Ver 3.0) FDD Controler Problems

I just purchased a new boxed OEM MSI K7T266 PRO2 (MS6380 - Ver 3.0) motherboard from JUST DEALS on E-bay which seems to have very sparce (or none) documentation for download on this site. This is a non-raid board which has the AGP Pro video card socket (with the white lock and release lever at the end of the AGP female connector). The board can also be identified with the following rather unique component/connector layout at the bottom end of the board:
1. In place of where RAID connectors attach to most of these model boards, this board has three aux USB connectors above the connector where the case front panel connectors usually plug in.
2. There are 3 CDROM audio connectors at the lower left below the last PCI slot.
3. To the left of the case front panel connector, there are two rows of connectors and jumpers which appear to be for use with a case which has front panel audio connectors. I believe the jumpers are for the purpose of selecting which audio output to use (front or the standard rear sound output jacks.
4. The area between the last PCI slot and the USB and front panel audio connectors described above, the motherboard is rather blank with no components or even places where optional components have not been installed.
5. This motherboard has a Phoenix bios whereas most other K7T motherboards made by MSI seem to be AMI bios.
6. Finally, when doing a search for MS6380 Ver3.0 on Google, all the hits seem to be in Russian, German or French. I suspect that this MB may have been manufactured for the European market. BIOS display is in English, however.
PROBLEM
I have installed an AMD Athlon TBird 1.2 ghz cpu with 40mb WD hard drive which already had Windows Me and lots of other SW installed. The system boots just fine from the hard drive and all works well except for the Floppy drive. When I try to access the FDD with a know good disk installed with valid data, it comes on and spins up, the front light blinks and after about 30 seconds of continuous running, a message comes up "floppy disk not formated, format now: (Y/N)" If I try to format the disk, it will not format and the system will ask to check to see if a disk is installed. Changing floppy disks does not help, whether this is a disk which has verified data installed or just a formated blank disk. I have tried two different FDD cables and 3 different Floppy drives and always get the same result. I have checked for bent or broken pins in the connectors and found they are all good. The FDD is a 1.44 MB and is connected to the end of the two-drive cable. No other FDD is installed. When I go into the BIOS setup, I verify that Drive A is installed as a 1.44BM 3.5" Floppy and None is selected for Drive B.
I am currently at a loss to know how to proceed here. I am wondering if this could be a BIOS problem but I am not sure if I can find BIOS update on the MSI Web site when they do not even list a MS6380 Ver 3.0 motherboard at all.
I am considering installing a PCI FDD controller card but not sure that these are even manufactured.
Please help.

To Toenne:
Thanks for the reply. This has to be a BIOS problem since the FDD has to be accessed by the BIOS before any software or installed chipset drivers on the HD are ever used. With my problem, I cannot even boot the system from the FDD.
I tried resetting CMOS and that did not help. I wonder if there is some kind of multi-mode floppy disk drive which this BIOS expects to see other that you standard old fashion IBM 3.5" 1.44gb drive. The solution is likely to reflash the BIOS except with this odd MB serial number, I am not sure if I can find the latest BIOS software for this Phoenix chip.
Does anyone know if there are any PCI FDD controller cards on the market where I could disable the on-board controller and use a plug-in card?
Thanks

K7T266 PRO2 RU constant freezing! need help!

Ok, after two weeks reading every thread in this forum that has this word "K7T266" on it, i decided to write these lines:
My good k7t266 pro2 ru stopped working a few weeks ago, i thought it was the cpu processor (athlon 1800+, i think thorougbred), the thing is that windows xp gots freeze randomly, i have reinstalled almost 10 times, trying everytime different bios combinations (version 3.3 through 3.7) and different settings (the ones written in some tweak/perfomance threads here), i have also tried three different power supplys (250W,350W and 400W) (amps always exceeded your recomendations on other threads), i also have tried different memorys in different combinations (1 bank, 2 banks, etc), tried too 2 different video cards (gforce 4200ti 128mb from evga and a gf4 440mx from excalibur i think), i have removed every other card (nic, usb connectors, etc), also have tried with a different hard disk (40 gb and 60 gb from maxtor and western digital). Tried cleaning and adding new thermal paste to the HSF (is the one that comes with the cpu), tried connectin the cpu fan to the power supply, tried with a different cpu (athlon 1300, palomino i think). I dont remember what else i tested, oh, i have it totally "naked" (no case) , i can send you pictures of it , oh, another thing i tried different via drivers (none, 4.43 and 4.49) , and windows xp has sp1. Ok, i dont remember anything else by now, i am buying a kt6 delta (i saw bas loved it) it must arrive this tuesday but i dont want to throw the k7t266 to the trash, it seems to me that there is some bad capacitor (they dont look abnormal, i have fixed msi boards with blown and inflated capacitors before). Ok , i just wanted to know that i really need your help here, dont know what else to say. Thanks a lot for your answers. :(

Ok, i am not at home to test the voltage thing that h2O proposed (i tried once but was afraid of burning cpu and memory, these things arent cheap in venezuela), and about the temps, they were around 40 (idle) and 50 (playing battlefield1942) (it's very hot in my room), that's why i got the board undressed (no case at all, just PS) . H2O , can you please help me with the voltage thing ? which values are safe and can be tested? tomorrow i will have the kt6 delta but i still want to know if the k7t266 can be used or sold.
Other things
- i have cleared cmos everytime i changed settings proposed here.
- i have clean installed xp (format c: partition) , BTW it sometimes got freeze during the first stages at installation , specially if i set FSB to 133.
- i did not tried to overclock (too hot and too expensive to try, i can not afford and/or find a better cooling device (water, best fan, etc)).
Again, i would really appreciate any help you can give to this poor bastard ;(
PS: sorry for my english, it's not my native language.

K7t266 pro2 ru freeze

Hello.
I purchased this motherboard on 2002.
This is my config:
Hardware:
Mobo MSI 6380 k7t266 pro2 ru (via kt266a chipset)
CPU AMD Athlon 1800+ Palomino core (no overclock)
RAM Kingston DDR PC2100/266 MHz (no overclock)
Videocard Triplex Millennium Silver Geforce 4 Ti 4200 64 Mb Ram (no overclock)
Analog TV card miroMEDIA PCTV
Digital Satellite TV Card Hauppauge Nexus-s (has mpeg2 hardware decoder onboard)
sound card CMI/C-media 8338 4ch (mobo's internal AC97 disabled)
ISDN TA card Asuscom PCI internal P-IN-100 ISDNLink
Software:
Microsoft XP SP2 slipstreamed, totally "windowsupdated"
Via drivers 4-in-1 "Hyperion" 4.51 installed (latest)
Promise FastTrak 100 Raid controller Driver 2.0.0.0 (latest)
Nvidia drivers Detonators 56.72 WHQL installed (not latest but working very well)
C-media driver for 8738/c3dx 5.12.1.0 (forced but perfectly working! and latest)
Bt 848 generic BtPCI WDM drivers (for the miroMEDIA PCTV, but tried even with pinnacle 4.* VFW drivers and 5.* WDM drivers)
Hauppauge Drivers 2.18c (latest)
The problem is this:
when i'm watching tv, from the analog or the digital card, if i do something on one of the hard disks (on the raid or not, ntfs or not), like transfer file, search a file, or something very HEAVY that requires high data rates on the hdds, the system freezes, EVERYTIME!
I read on this forum about the pci latency unofficial patch by george i-dun-remember-who, but even installing it, it didn't help.
What i must do? The system works not so bad in other situations, so how can i fix this problem?
I get mad when the system freeze 'cause i need to hard-reset everytime and i think this can do damage on xp files :(
Please, if anyone has this same problem and fixed it, help me!!!
Thanks in advance.

Hi there.
@Fredrik Åsenius:
Look, i was wrong about cas latency, it was 2,5 set by SPD, not 2. For the HD disks, they are ALL cooled by fans of 4x4 or 5x5 (cm), that i obviously clean regularly, so you can understand that i touched they with the finger and they are kinda at ambient temp.
Anyway, this are the pci card placings:
Slot 1 -> empty
Slot 2 -> miroMedia PCTV card
Slot 3 -> Asuscom ISDN TA card
Slot 4 -> C-media/CMI 8338 audiocard
Slot 5 -> Hauppauge Nexus-s DVB-S TV card
More infos: like i said in the first post, I ever installed from the beginning, that means when i fresh installed xpsp2, the "PCI Latency timer patch" from George Breese (now i remember him ^^) from this page http://www.georgebreese.com/net/software/#PCI, but didn't help.
Actually i followed the hint from MGP, and a little more, so i tried to enable wait states, delayed transactions and stuff, and disable fastwrite, low agp x factor (from 4x to 2x), even highen PCI Latency timer in the BIOS to 248, the maximum, and seems that the situation is better, i tried to watch tv (from the Nexus-s with Progdvb) and do a search on all my hd, the system didn't freezed and the video didn't glitched as before. Only when i ran the PC Alert's Cooler XP, continuing watching dvb-s tv and continuing searching, the system freezed. Well, a little better but i'm investigating some more: i was asking and googling if there's a PCI test bench software but had no luck, a guy from irc told me to try Sandra and Aida. Actually i tried Sandra, the latest, and read about the pci card infos.
I found an interesting thing: not all pci card have the same PCI Latency timer, there are some that has a personal entry. I googled for PCI Latency timer again and found a program named PCI Latency Tool 3, that let you set every card's timer separately. This program shows exactly the same settings as Sandra, so i'm sure that is good working ^^
Actually i reset the timer at the default entry, 64, and this is the entry list of every card's PCI Latency timer:
miroMEDIA PCTV -> 64
Asuscom ISDN -> 16
C-media/CMI 8338 card -> 64
Hauppauge Nexus-s -> 255
This are the timings of the other pci related and mobo integrated devices:
CPU to PCI bridge -> 0
PCI to AGP bridge -> 0
PCI to ISA bridge -> 0
Controller IDE VIA BusMaster -> 32
Promise Fasttrak 100 Raid ctrl -> 32
Microstar (NEC) USB 2.0 ctrl -> 64
Nec Usb ctrl 1 -> 64
Nec Usb ctrl 2 -> 64
And finally this is the timing of the AGP card:
Nvidia geforce 4 ti 4200 agp4x -> 248
I dunno if there's something wrong so i didn't changed anything, but i think that's the Nexus-s timing is really high and over the maximum allowed by the mobo, so can be this the problem cause... if not i dunno where to hit my head
@ osnavi:
No, i dun think can be the power supply not enough, i dun have a friend with a better one but i tried uninstalling all the others cards (sound, pctv, isdn) and all the other Hd and the dvd-rw too, so only the basic needed to try: mobo + cpu + ram + agp card + dvb-s card + 2xhd 80gigs, and did exactly the same... well, i dun think now that 17 A is not enough, even if it's not so the minimum... Ah, did i said that it did the same even with a "low power" gefo2mx ? well i'll write it again :p ^_^
@MGP:
I know that's not an MSI fault and is a Via fault... but it got me sad, cause i like MSI hardware and stuff, but this bad experience, and more of this no support at all from the manufacturer.... well is no good :p
For the other things look above, i tried but i dun think agp stuff is related.... I think that is pci latency related, cause i know that i.e. eide or raid performances are not so good. Thinking that when my issue pops out is exactly when i'm watching tv and doing hd stuff, that means poor eide or raid.. or pci performance, than here comes out that it can be only this the cause.
Ah, i dunno if i told you all, guys:
watching tv from the pctv analog card (and i mean at maximum resolution of pal 768x576) or from the dvb-s card (with hardware mpeg2 decoder that means 720x576) means that there's needed a maximum bandwidth of 32 MB/s (it means: 768x576 for frame x 25 frame per second x 3 bytes color (32 bits/8 =3 bytes) = 32 megabytes for every second), that's pretty much, but not to saturate pci bw. The matter is when 32 MB/s is occupied and the eide or raid needs bw: the chipset seems to freeze cause can't manage well the bw needings, and so is related to the latency timer.
Sorry again for longness ^^

HELP! k7t266 pro2-u winxp install

Hi,
I have a problem with installation of winXP SP1 on my computer. First i got a blue screen in the first step of installation (windows loads drivers, then freezes). It said that acpi.sys is the problem. I disabled it and then the problem was irq not less... . Then i disabled
internal cache, system bios cacheable and shadowing options and installation started but the computer was too slow ( it took about an hour to copy the files on hard disk). After the installation was finished i put back the fields internal cache to writeback and c00 32k shadow to cached and left system bios cacheable on disabled ( i read in the manual that it might be a reason for system hangups) to speed it up. For a while it seemed like it was working ok, i installed the drivers, software... but tomorrow everything up. windows started to freeze when i tried to encode mp3's from audio cd's, when i tried to install new sofware...
I dont know what to do and don't want to disable internal cache because of the huge system slowdown...
Can anyone help !!!
my config is
amd athlon xp 1800+
microstar k7t266 pro2-u with lan
256mb kingston 266 ddr
maxtor 40gb ata133
teac w540e writer
nvidia g-force 2 mx400 64mb

Quote
Hi!
What can your PSU provide in terms of ampères?
Load BIOS setup defaults. Open case.
Have the HDD and the CDRW on different IDE channels and cables, with both as Master respectively at the end of the cable.
Install VIA 4in1 drivers.
When everything works, make proper BIOS adjustments.
Best wishes, and good night!
Can't provide the data about my PSU because i'm not at home right now.
I will do it tomorow.
Cables are already set up like that.
Thank you

Raid 0 Failure! XP Pro won't read array on MSI k7T266 pro2 *URGE

Before anything else, thanks for reading and I hope you can help:
I have an MSI k7T266 Pro2A-RU motherboard with 512MB of Mushkin RAM, AMD XP 1600+, a Geforce2 MX400, Audigy Soundcard and a cheap PCI NIC card. I consider myself an above average technician and I've come up on a problem I can't figure out. There is about 80GB of data at stake here:
I have 2 IBM Deskstar 40GB 7200 RPM drives that were configured in a RAID 0 (stripe) configuration over a year and a half ago. This gave me a total of 80GB online. Windows XP Professional was installed and the drives have been running fine every since...
The system was practically bulletproof and it was very rare it ever locked up for any reason. A few days ago, however, the system locked up about 4 or five times. There was no software or hardware that had been added or installed and system use hadn't really changed up or down. I run up to date antivirus software (Command Anti-Virus), run behind a secure firewall and watch what I open. The lock ups were random, but happened when I was away from the computer. ( I leave my system on all the time).
Being a bit paranoid, on 1/28/03, I acquired an 80GB Maxtor drive to install to back up my datafiles. Before the install, I notice the system had locked up at least once that day, so I figured I would hurry up and get the drive in to back up. I installed the 80, booted, configured it in XP and made it active and transfered a few test files over. No problem. I made the decision to back up my data files before bed and continued to work for the next two hours. The system ended up locking up with a windows blue screen STOP error message: KERNEL_FAULT_INPAGE_ERROR when I tried to run a program. Thinking little of it, I rebooted the computer to find I could no longer access the data on the RAID.
I've tried nearly EVERYTHING I can think of. (You can already assume I've done the basics (check/replace the cables, etc). Here's a list and the results:
---- Reboot in all available modes (Safe, Safe with NW, Normal, Last known, etc). They all FAIL. In safe modes, you can see where the system actually tries to boot off the array (runs through driver files and stops on MUP.SYS) and hangs. Same result with all other drives removed except the RAID.
---- Installed another drive, loaded XP with the raid controller files (By the way, it's a Promise ATA 100 "lite" controller), plugged the RAID back in and it hangs on boot up. Safe mode gives the same results. Tried the same thing with Windows 2000 (so I could access the NTFS partition) and Windows 2000 won't load when the array is plugged in, but loads ok when it isn't (used the 2000 driver for the RAID controller for this attempt). Safe mode gives the same results.
---- Removed all drives except the Array and tried to reload XP (with the array drivers downloaded again from the site.) No effect. System hangs.
---- In a last ditch effort, I have access to Winternals Administration Pack 2002 of all of their tools. ERC Commander, designed for this type of problem, Disk Commander, and the other tools all do the same thing: Any time the system attempts to read from or access the arry, the OS will hang. It won't even check for NTFS compatibility in the ERC commander program booting from a boot CD, and for those that are familiar with it, the Disk Commander program blue screens with a STOP: 0x000007B (0xF896963C, 0xC0000034, 0x0, 0x0) error. Research has told me this is an INACCESSABLE BOOT DEVICE message.
These are the main highlight major attempt things and there's a few things in between I've tried (like using Norton Ghost to try and mirror the array to the 80GB. Norton ghost said there is an error reading the partition and can't go any further (Returns an Internal error))
I'm at the point where I have run out of available options and don't know what else to try. I have since purchased the exact same motherboard off e-bay to see if it just so happens to be the controller and to see if my RAID will come back so I can at least read the data off of it. It should be here in a few days. If that doesn't work, I'm toasted. Could I be fighting a hardware (drive or board or controller) problem. Is the array THAT corrupt the OS can't read it???
If anyone has any other bright ideas, I'm willing to try about anything short of damaging the array. Any help is greatly appreciated. Please post here, or e-mail to [email protected].
BTW, the Promise BIOS is Fasttrak 100 "Lite" v 1.31.1(Build 30)
Thanks.
- Chuck! ?( ;( ;( ;( ;( ?(

got one but its lightley used for storage but amd forum storage is full of tales of woe with them
type deskstar and problems in goggle for a laugh

K7T266 Pro2 RU, Raid-0 & Linux

When I try to install either Red Hat 8.0 or Mandrake 9.0 on my K7T266 Pro2 RU, which has 2 x 40GB drives configured as RAID-0 (ie 1 x 80GB), both versions of Linux see the two physical drives and not the one logical stripe array. Why? It almost seems that the Linux drivers for the Promise 20265R are treating the raid channels and normal IDE channels. I want to install Linux onto the RAID-0 stripe!
I have searched for guides/tutorials on installing Linux on RAID, but all the ones I found only talked about RAID-1 (Mirroring).
Windows 2000/XP only sees the one logical drive.
Any help would be appreciated!
Chris.

The installer is wrecking the /etc/raidtab file when trying to detect existing raid arrays.
Solution: Format a floppy disk with a DOS filesystem (in Linux, you can use the command "mkdosfs /dev/fd0"). Copy
use detect_devices;
package detect_devices;
log::l("PATCHING");
*raidAutoStartRaidtab = sub {
my (@parts) = @_;
log::l("patched raidAutoStartRaidtab");
$::isInstall or return;
require raid;
#- faking a raidtab, it seems to be working )
#- (choosing any inactive md)
raid::inactivate_all();
foreach (@parts) {
   my ($nb) = grep { !raid::is_active("md$_") } 0..7;
   output("/tmp/raidtab", "raiddev /dev/md$nb\n device " . devices::make($_->{device}) . "\n");
   run_program::run('raidstart', '-c', "/tmp/raidtab", devices::make("md$nb"));
unlink "/tmp/raidtab";
use raid;
package raid;
*prepare_prefixed = sub {
my ($raids, $prefix) = @_;
log::l("patched prepare_prefixed");
$raids or return;
&write($raids, "/etc/raidtab") if ! -e "/etc/raidtab";
eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
foreach (grep { $_ } @$raids) {
   devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
to the floppy disk. Remove the floppy and reboot using the Mandrake Linux 9.0 CD1 to do a CD-ROM installation. During boot, press F1 at the splash screen, then place your floppy disk that contains patch.pl in the floppy drive. At the prompt, type "patch", then follow the installation as usual.
Hope that helps

MSI K7T266 Pro2-RU - problem with the lite-raid - would like to use it as a normal ide

Hi!
I tried to install a single drive on the raid-controller and create a single array for it.
For some reason the disk management in Windows XP does not see it, even though
I have updated the related drivers. However, the Disk management showed it the first time after I had installed the HD onto the raid, but as I could not do anything intelligent with Disk management in regard of the HD, I removed the drive from Disk management with that effect that the disk management does not recognize the drive at all, even though I have now re-created the array on the risk, disabled and enabled raid on the Bios.
I read that there exists modified bios for MSI KT3 Ultra ARU BIOS, which will turn the Raid into regular IDE. That would be something that would most probably be the best way to proceed for me. However, do such bioses exist for MSI K7T266 Pro2-RU? Any other suggestions on how to get the disk management to succeed in recornizing the IDE on the raid-controller would be good to hear as well.
Yours sincerely,
Tero

Ok, I tried updating with the hacked 3.7 Full Raid Bios. Now I seem to have another problem: even though the hacked bios recognizes my HD, it thinks it's about 130 GB, when it in reality would be 250 GB. The hacked bios seems to work ok with Disk Management in Windows XP too, so it's a shame that the hacked bios doesn't seem to have a support for large disks. On the other hand the link at Lumberjacker was dead for the hacked bios v3.6, I would have tried it, if it would have provided me with a good solution to my problem.
I then went back and installed the official v3.7 bios and the lite raid does now recognize the HD being 250 GB, but the Disk Management just states "Missing" in regard of the HD and does not let me do anything fruitful with it. I looked the HD's properties and the Device Manager just states "Hardware device not connected code 45".
How in earth could I manage to make this work now (I do not want to move my other HD:s as they are full of stuff and don't want to risk losing any content)?
General specs of the computer: IDE 1: 60 GB and 120 GB Matrox, IDE 2: Nec2500 and Sony DVD-Rom, Athlon 1800+ XP, 512 MB memory, Ati 9700 np, Network adapter card. The new HD to be added is a 250 GB WD (have removed the jumper)
Thank you for any tips,
Tero

K7t266 Pro2 and no sound

When I go to load the audio drivers I get a message saying:
"VIA Audio Chipset is not enbabled on this system! Please enable it first in Bios."
After checking Bios it is already enabled but yet not listed under the Device Manager in Windows.
I have re-installed the OS ( Win98SE ) 3 times now per VIA FAQ and still not recognized.
Any help and/or suggestions would be greatly
appreciated.
Thanks
Mike
****System Info. *********
MSI K7T266 PRO2 V2.0
AMD ATHLON XP 1500+
CRUCIAL 256MB DDR PC2100
ATI RADEON 7000 64MB DDR
NETGEAR FA 311TX 10/100 NIC
Win98SE

Mike:
Maybe you are trying to install the 74mu170a or the new ComboAudio_a1u300a.
The last audio driver from VIA that works on this board is 74mu160a, VIA says it is due to new Microsoft Certification requirements.
Hope it helps, Regards Gustavo.-

Problem between K7T266 Pro2-RU and ASUS GeForce 3 V8200

Hi, i've installed an ASUS GeForce 3 V8200 in my K7T266 Pro2-RU.
The system starts correctly, but when i force the AGP from BIOS at 4x all games doesn't run very well...
I usually play games like UT or RTCW and when i run they i see many problem with the 3D rendering and shadow build...
All drivers are up to date...
How can i resolve this problem ???
Thanx...

Quote
Originally posted by Fredrik Åsenius
I guess you got your problem solved. Just wondered about:
Did you uninstall the previous drivers?
Do you have any PCI cards near the AGP?
What are your system temperature, according to BIOS?
I think i'll follok the Toenne suggest. The difference between the AGP 2x and 4x is very small, anyway my drivers are (un)installed correctly and i don't have any PCI card near the AGP slot. Instead i think that in the future i'll pay more attention at the temperature problem: my Athlon XP 2000+ is hot also with a good copper cooler...
Another questios is, can anyone help me to find the best BIOS settings for my system?
In the next days i'll post my BIOS configuration so we can see where i've mistaken.
Thanx again...

K7T266 Pro2 RU problem and question

Hello
I recently upgraded my CPU from an Athlon Thunderbird 1.400 to a AthlonXP 1700+ on my MSI K7T266 Pro2 -RU (MSI 6380 v2.0). The problem is that when i have the option Fast Command enabled in the bios, windows (Windows XP Professional) will crash and reboot after a couple of minutes (this happens even while i am browsing the net). With my previous CPU the fast command option didn't cause any problems. I wanted to ask if there is a way to solve the problem as the Fast Command increases the performance of my PC by 6-7%.
Also while the mobo won't support the tb2200+ will it support a lower clocked tb cpu (like 2000+)? And will i have a problem if i take an AXP2000+ and o/c it to 2200+ or 2300+?
Sorry if the above questions are already answered but its 02:40 in the morning and i don't have the courage to search the forum
Thank you for your replies
Palpatine
AMD AthlonXP 1700+ @1600MHz
Globalwin WBK68 HSFAN
MSI K7T266 Pro2 - RU (3.6 bios, Via 4in1 v4.00)
2 x 256 mb Corsair XMS 2400
2 x WD400BB 7200rpm in RAID 0
Leadtek Geforce 3 (with DetonatorXP 40.41)
Soundblaster Live! Player 1024 (latest creative winxp drivers)
Compex NIC 10/100 PCI
Teac W540E CDRW 40x/12x/48x
Pioneer DVD 106S 16x/40x
Herolchi 350W PSU

I had the fast command problem with the 512 mb generic ram (2x256) which i replaced later with the corsair XMS 2400, so i don't think that the cause of the problem is the memory. The memory now runs at 145 at CAS2 stable.
I will try tomorrow flashing the mobo with the 3.3 bios and see if it solves it (i had the 3.6 before i installed the new cpu).
Also i read in another forum that a mobo supports up to a specific cpu because higher clocked cpus require higher current and might destroy the circuitry in the mobo. If this is not true and its just a bios support issue then i will buy a XP2000+ and will try to o/c it to FSB 145-150 (2200+ to 2300+).
Do you have the fast command enabled? I see we have the same mobo, memory and (almost) the same cpu.

K7T266 Pro2 incompatibilty problem with Nvidia GeForce4 Ti4200

I just bought the GeForce4 Ti 4200 from Siluro and installed it on my MSI K7T266 Pro2 MB and have since then experienced some problems when booting XP pro.
Everything seems to work fine untill the very last application loads in XP after boot. Then the screen turn white, the mouse cursor becomes a black and white stripped square and the system reboots automatically. Generally after second boot, evreything seems to work fine but I get an XP error message stating that "the Nvidia Geforce4 TI 4200 drivers may be the origin of the critical problem encountered".
I have all lastest drivers for both the MB (Bios 3.7 + lastest VIA drivers) and the Nvidia GeForce (Detonator 41.09) and yet experience the problem... Help!!
MB K7T266 Pro2 MS-6380 Ver. 2 (Bios 3.7)
Siluro Geforce4 Ti 4200 (Detonator 41.09
XP Pro

I have an AMD Athlon 1700+
768 MRam DDR 266
Sound card is Sound Blaster Audigy Platinum EX
I have an ADSL connection with Alcatel Modem
I hope this is what you required... If not, let me know exactly what it is as I do not really know what PSU and the rest stands for (or when I can get that information on my PC!)
Thanks again for your help!

K7T266 Pro2-A USB Drivers...

Similar Messages

Maybe you are looking for