K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

Hello ,
I was using my mainboard with 32 MB Creative Riva TNT2 Ultra until creative's fan was damaged . I tried 16 Creative TNT2 m64 display adapter of a friend of me , but it didn't work with K7T266 PRO2-RU. Many sounds are coming from mainboard while D-LED shows Testing RTC (or boot attemp, I'm not sure about that) (Same symptoms with "no graphic adapter" - I tried again after unplugged the display adapter - )
At the beginning I was thinking that the 16 MB creative graph adap. was broken . So , today I bought a new graphic adapter 128 MB of Creative 3d Blaster5 Radeon 9200SE . When I plugged it into mainboard , I saw the same problems with 16 MB Creative TNT2 m64 . After that , I found another 32 MB Creative TNT2 Ultra from my friend and it worked with my mainboard FINE .
- I tried all of the old bioses of MSI K7T266 PRO2-RU
- I tried to start the computer with no any other devices (such as HDD , sound card , tv card etc. ) . Only display adapter was plugged in the mainboard , but it didn't work . System hanged up everytime I tried .
- I made some bios adjustments which are suggested at this forum ....
But none of these worked .... ?(
What is the problem ? Why only 32 MB creative TNT2 Ultra is working with my mainboard , but 16 MB Creative TNT2 M64 and 128 MB Creative 3DBlaster5 Radeon 9200SE are not while all of them are working FINE with an old PII mainboard . (tvout+DVI) I'm looking forward to hear from you . , Help me please .
Ps : Can new beta bios solve that problem ?
XP pro
2100+ 0.18m XP CPU with coolermaster CP5
40 GB Seagate Barracuda IV
300 watt Codegen Power Supply
2*256 MB Kingston DDR 2100 Memory
( No floppy , no souncard , no tv card etc , no any other devices like cdrom , dvdrom , cdrw etc.)

That's it!
I provided a few PSU's from my friends and tried 420 watt thermaltake and 520 watt VANTEC Stealth 520A PSU ...
Same situation happened and 128 MB Creative ATI Radeon video card didn't work ...
The problem can not be about PSU ...
I tried two different brand of fx 5200 (128 MB ) video card on my system (with 300 watt codegen PSU) . Everything is ok .
And I also tried the RADEON card on my friend's computer which is running with 230 watt Elan Vital PSU . It worked perfectly ...
So what can I think about that situation?
The Answer is : There is something about MSI mainboard ... When I wanted to contact with support center via e-mail , I got an automated e-mail answer which is not completely able to solve any of my problems.
Besides , I saw the problems between brand new Nforce mainboard of MSI and ATI video cards ...
SO , if we get all of these informations together , we can say "THERE IS SOMETHING ABOUT MSI" ...
The solution is not buying expensive PSUs...
That's really bullshit , I can buy a brand new mainboard instead of an expensive PSU.
Finally , I bought an Asus mainboard , everthing is going ok now!
I'll not buy products of MSI anymore because they didn't do anything to solve my problem . Goodbye MSIIIIII ....................................... ........

Similar Messages

MSI K7T266 Pro2 ARU and D-Link Trouble

I've just bought a wireless ethernet system from D-Link. A PCI adapter called DWL-520+ (22 mbs)
When I try to start up my PC with the Promise RAID enabled it won't boot, I disable the RAID controller... the PC boots and the D-Link card works great.
I've tried to switch places in the PCI slots. Nothing helps. And yes; I've cleared the NVRAM...
Could anybody please help me?
My system:
MSI GeForce3 TI500
MSI K7T266 Pro2 ARU (with BIOS v3.6)
Creative Audigy
D-Link DWL-520+ Wireless NIC
3COM 3C905C NIC
Windows XP SP1
Thanx !

Quote
Originally posted by Router
Please see the similar thread "POST failure D-Link DWL-520+ Wireless".
I have also just takled with D-Link Tech Support and they say that there is a newer unpublished driver available. The agent said that he thought there was a known problem using the DWL-520+ with MSI boards and that a fix was becoming available.
My mobo is K7T266 Pro2 RU and im thinking about purchasing a D-Link 520+ (DWL 520+) wireless adaptor
but im not sure wether my mobo is PCI compliant as D-Link suggests. Can anyone help me out?

I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). Is there a way to get it back somewhere?

Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Problem with repaint of display after a click event

Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.

modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
     Display display;
     Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
     this.display =display;
     this.dsp11 =dsp11;
     addCommand(quitCmd);
     createController();
     setCommandListener(this);
     display.setCurrent(this);
          protected void paint(Graphics g)
          g.setColor(255,200,150);
          g.fillRect(0, 0, getWidth(), getHeight());
          if (play != null){
          g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
          if (stop != null){
          g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
          if (next != null){
          g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
          if (previous != null){
          g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
               /////this will draw on key UP
               g.setColor(0,0,0);
               System.out.print(gamcode);
               if(gamcode==Canvas.UP){
                    g.drawString("PROVA",10, 0, 0);
               }else if(gamcode==Canvas.DOWN){
                    g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
          protected void keyPressed(int keyCode)
               repaint();
               if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                    gamcode = UP;
                    repaint();
                    else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                         gamcode =DOWN;
                         repaint();
          else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
          else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
          public void commandAction(Command arg0, Displayable arg1) {
               // TODO Auto-generated method stub
               if(arg0==quitCmd){
                    display.setCurrent(dsp11);
}

Problem with hotmail calendar display

Problems with hotmail calendar display.

I am almost a total computer novice and am having what I think is the same problem Just got my first Apple computer (Macbook Pro). MSN Hotmail is my email account. All the events on my 'hotmail' account are now unreadble because they are squished to the left side of the screen and I don't find any instructions as to how to fix this in the system. This problem didn't exist when I first started using my MAC two days ago, but now I'm stuck. Everything else in my 'hotmail' seems to work fine. Don't know what Chrome or Firefox is or if there is a cost for them. Also, have never downloaded a program if any kind.
My calendar is critically important to me and I don't have a clue as to what to do now. Hope you can help.
Thanks. Linda

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

Problem between K7T266 Pro2-RU and ASUS GeForce 3 V8200

Hi, i've installed an ASUS GeForce 3 V8200 in my K7T266 Pro2-RU.
The system starts correctly, but when i force the AGP from BIOS at 4x all games doesn't run very well...
I usually play games like UT or RTCW and when i run they i see many problem with the 3D rendering and shadow build...
All drivers are up to date...
How can i resolve this problem ???
Thanx...

Quote
Originally posted by Fredrik Åsenius
I guess you got your problem solved. Just wondered about:
Did you uninstall the previous drivers?
Do you have any PCI cards near the AGP?
What are your system temperature, according to BIOS?
I think i'll follok the Toenne suggest. The difference between the AGP 2x and 4x is very small, anyway my drivers are (un)installed correctly and i don't have any PCI card near the AGP slot. Instead i think that in the future i'll pay more attention at the temperature problem: my Athlon XP 2000+ is hot also with a good copper cooler...
Another questios is, can anyone help me to find the best BIOS settings for my system?
In the next days i'll post my BIOS configuration so we can see where i've mistaken.
Thanx again...

TS3992 I changed my Apple ID and problems with my Account.Once iTunes store had sorted those out I decided to back up on my 3 devices.Now my Reminders and Notes are all old ones and the ones I did in the last few days have disappeared.

I changed my Apple ID and had problems with my Account.Once iTunes Store had sorted those out I decided to back up on my 3 devices.Now my Notes and Reminders are all old ones and the new ones I created in the last few days have disappeared.

Ok. Found something that said to shut down and hold the option, command, p, and r keys on restart. Held them down for a few restarts and everything automatically signed in and works. Woohoo!!!

K7T266 Pro2 RU: Boot problem, wrong CMOS setting

Hi All,
I have had the Pro2 RU MB for a year now with very few problems. Over Christmas I was cleaning up my computer and was going to do a format :C and reload windows. When I went to start the computer after cleaning it up (remove all cards, clean up dust) I got 4 red leds on d-led. Tried everything (different memory, reset bios, unplug everything except video, ect) always 4 reds. Bought a duron 1.3 GHz put it in started the computer it start to post, went through fastrack raid screen and then I got "CMOS settings wrong" "press F1 to setup", "F2 load defaults" ...... screen I go F1 into setup make ajustments and everytime I save and I get 4 red leds on reboot. If I go F2 load defaults and continue it will try and boot, my hard drives are in a raid 0 array and it will check floppy, ide 0, cdrom by default so it can't boot. If I reboot at this point it will go 4 red leds. I can't flash the bios which is ver 3.2 because the bios protection is enabled and I can't change any settings. I could use some help this one has my stumped.
I have tried 3 different power supplies, and that is not the problem.
K7T266 Pro2 RU
Duron 1.3GHZ, retail box HSF
256MB Cruical pc2100 ram
300w AMD approved PSU
Geforce2 GTS 32MB
2 60GB Quantum HD in raid 0 array
Win 2k pro
Cheers Rugger

I have reset the cmos with pc unplugged...yes.
I have read the FAQ at this site, I have used the search feature at this forum I have googled my problem searched a few other sites and I am stuck. I have been building computers and troubleshooting problems for 3 years now. If it was a new board I would RMA it at my wholesaler.
It seems like there is a problem with the cmos chip because it will not accept any changes to the settings. As soon as you save the changes in the cmos the computer reboots and I get 4 red leds in d-led.
Cheers Rugger

K7T266 PRO2-RU stability problems

In the last few months I've been experiencing general stability issues with my K7T266 PRO2-RU. In attempts to try and resolve these issues I've flashed the BIOS, updated drivers, reinstalled Windows numerous times, checked for leaking capacitors and reduced the machine to nothing more than the essential hardware (video card, memory, processor).
In troubleshooting I've discovered very little, except that none of these things have been very successful and some odd things that are outlined below.
1. The machine still randomly reboots, and programs crash inexplicably without error.
2. WindowsXP invariably hangs during installation to the RAID controller (RAID 0). I've tried various driver versions but all reproduce a similar result. I suspected there may be a problem with the drives, but that doesn't appear to be the case as it does this regardless of the drives used - 2 Maxtor DiamondMax Plus D740X'(s). It also does this when using 2 Western Digital WD300BB'(s) and new cables, so I know it is NOT my drives. Windows will install to one drive but is as previously stated - unstable.
3. I've tested the machine using another video card, in addition to running the video card and the memory in my other box, of which both cards are good and run rock solid under stress testing.
Any ideas or suggestions are welcome.
Here's the config:
MSI K7T266 PRO2-RU (Bios Rev. 3.7)
Athlon 1800+ (Not OC'd)
256MB Corsair XMS PC2400 (x2)
Asus GeForce 6800
Maxtor DiamondMax Plus D740X (x2)
Creative SB Audigy Platinum
3Com 3C905B NIC
Enermax EG-465P VE
Thanks...

Quote
Originally posted by Rob454
Hi,
You sure it isn't a memory problem?
try http://www.memtest86.com
Thanks for the suggestion,
While I was waiting to see if anyone would quickly reply I read through previous posts to the forum and found a link to memtest86. I've already tested one module to isolate bank 0 as known good and it passed. 2nd attempt I put both modules in, 1 in bank 0 and the other in bank 2. I began receiving errors only after 5 min. I never suspected this would be the problem as I tested the memory in another machine and previously with an obviously inferior memory test app and it passed. No big deal though, at least now I've discovered the problem.
I'm now doing additional testing to the suspect module.
(Errors in Bank 2 - Next trying it in Bank 0 which I know worked, just to rule out a possibly defective bank)
Update:
Errors all over the place in Bank 0,1, and 2 - Looks like the module took the dirt nap. Time to use that lifetime warranty.
Thanks again.

K7T266 Pro2-RU and Promise FastTrak100 RAID Drivers

Hello
I am trying install my 2 new Seagate HardDisk in the IDE RAID on my K7T266 Pro2-RU motherboard without success.
MotherBoard's IDE RAID BIOS can see the two 160GB HDD that I have installed and Windows XP can not see it with the lastest BIOS v3.7 and the lastest Promise FastTrack IDE RAID Controller ( v2.0.90 Build 10 ). Both HDD are not detected by Windows XP by using F6 key, However my 2 40GB HDD are detected by Windows XP without problems.
I have 2 K7T266 Pro2-RU motherboards and they have the same problem, I think that the really the problem is the fasttrack.sys driver Could be it updated ?
Does anyone have new Promise Drivers for Windows XP ?
Cheers.

Yes I do, I have used that drivers for many time and they are very old in this moment because Seagate Barracuda 7200.9 160GB are not visible, only my IBM DeskStar 40GB works fine with that drivers.
I have tryed to use the last fastrtrack.sys v2.00.0.25 from Promise Technology without success which has support to large HDD above 137GB and needs BIOS update to my motherboard v2.00.0.24 in FastTrack (tm) "Lite" BIOS v2.00.1030.23.
http://www.promise.com/support/download/download2_eng.asp?productId=15&category=driver&os=0&go=GO
I have installed Windows XP SP1 in my IBM DeskStar 40GB on IDE3-RAID and works fine, later I have installed another HDD Seagate 160GB on IDE4-RAID and Windows XP can not see it.
Later and I have put the new fasttrack.sys (v2.00.0.25) driver in Windows XP and with a reboot machine, Windows XP can see my new HDD160GB HDD like a 149.05GB unpartitioned drive ( which is corret ). When I put the old fasttrack.sys driver Windows again can not see the 160GB HDD
Later I going to install the Windows XP SP1 in the new Seagate Barracuda 7200.9 160GB and the IBM DeskStar 40GB by using F6 key and neither HDD were visibles. So I can not continue with the installion
Later I going to install WinXP again with the old drivers and once again only IBM 40GB is visible.
I need your HELP MSI Support Team.
Thanks in Advanced.

MSI K7T266 Pro2 RU and XP2100

Hi
Could you please try and advise on a problem with a MSI K7T266 Pro2 RU (V2) motherboard. This works perfectly OK when installed with an AMD Athlon 1Ghz CPU, however when I install an Athlon XP2100 (Green – Palomino Core) CPU the machine will not boot-up.
I know the CPU is OK, as it works in another machine. I am running Windows ME with Bios V3.3.
Your advice would be appreciated - Thank You.
Ian Messenger

Hi
You have to use bios 3.5 minimum
3.3 only suppert 2000+
remember to set clock to auto
Quote
Originally posted by Ian Messenger
Hi
Could you please try and advise on a problem with a MSI K7T266 Pro2 RU (V2) motherboard. This works perfectly OK when installed with an AMD Athlon 1Ghz CPU, however when I install an Athlon XP2100 (Green – Palomino Core) CPU the machine will not boot-up.
I know the CPU is OK, as it works in another machine. I am running Windows ME with Bios V3.3.
Your advice would be appreciated - Thank You.
Ian Messenger

MSI K7T266 Pro2-RU and 200GB HDD

Since 2001 I have used my computer builded with MSI K7T266 Pro2-RU ( 6380) mainboard.
A week ago I bought a new Samsung's hard disk (SP2014N) with 200 GB capacity. Before connection of the new disk to my computer, I upgraded BIOS to the newest one, downloaded from MSI Web site.
The new disk is connected as master to IDE-0 interface and to the second IDE is connected my old 40 GB Seagate (as master) and DVD recorder NEC ND-3520 (as slave). The BIOS has detected the new disk as Auto, the old one as User type (47), the DVD recorder as CD and everything looks right, but there is a problem: I can not connect any drive as slave on Primary IDE channel. The BIOS does not recognize the HDD or CD/DVD connected to slave on Primary channel.
Can you help me, please?

To Osnavi's questions: yes, yes, yes, yes.
To DaveR: my both optical drives worked as slave together with my old Seagate HDD (40 GB) and everything was fine.
I don't like to connect both hard drives on the same channel, because I'm working with huge video files and I need some speed of independent HDDs.

Workflow and problems with labels

Hello!
I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above. Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
Where is the help and reference files for Edge? - is this screen shot it? -
I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
Cheers.
Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Master Document with base styles</title>
<link href="css/master_styles.css" rel="stylesheet" type="text/css" />

<link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
<link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
<link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
<style type="text/css">

</style>
</head>
<body>
<div id="container">
         
            <div id="mainContent">
                <div id="mainlogo">
                </div>
            </div>
            <div id="firstButton">
                  <div id="Abutton1">
                  <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                 </div>
            </div>
            <div id="transition1">
                   <p>Wipe transition 1</p>
            </div>
            <div id="secondButton">
                    <div id="Abutton2">
                   <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                   </div>
            </div>
            <div id="secondContent">
                <div id="Abutton3">
                <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                </div>
            <div id="text1">
                  <h1>Heading </h1>
                  <p>Byline</p>
                </div>
             </div>
<div id="transition2">
    <p>Transition 2 - TBC</p>
</div>
      <div id="thirdContent">
      <div id="lastbutton">
        <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
      </div>
      <div id="text2">
        <h1>Heading</h1>
        <p>Byline</p>
      </div>
</div>
    <div id="transition3">
        <h4>Small print</h4>
</div>
</div>
</body>
</html>
CSS:
(master_styles.css)
@charset "utf-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #19171B;
    font-family: AFBattersea;
    font-size: 100%;
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: left;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
#mainContent {
    z-index: -1;
#firstButton {
#transition1 {
    color: #FFF;
#secondButton {
#secondContent {
#transition2 {
    color: #FFF;
    height: 100%;
#thirdContent {
#transition3 {
    color: #FFF;
#mainlogo {
    background-repeat: no-repeat;
    background-position: center center;
    background-image: url(../img/960_off.png);
#Abutton1 {
#Abutton2 {
#Abutton3 {
#text1 {
#text2 {
#lastbutton {
#text3 {
(desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
@charset "utf-8";
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: center;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    height: 700px;
    width: 1024px;
.mainContent {
    height: 100%;
#firstButton {
    height: 100%;
#transition1 {
    height: 100%;
#secondButton {
    height: 100%;
#secondContent {
    height: 100%;
#transition2 {
    height: 100%;
#thirdContent {
    height: 100%;
#transition3 {
    height: 100%;
#mainlogo {
    background-image: url(../img/960_off.png);
    height: 72px;
    width: 960px;
    margin-top: 364px;
    margin-right: 36px;
    margin-left: 36px;
#Abutton1 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton2 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton3 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#text1 {
    text-align: left;
    margin-top: 16px;
    margin-left: 320px;
#text2 {
    text-align: left;
    margin-top: 16px;
    margin-right: 330px;
    margin-left: 360px;
#text3 {
    text-align: center;
    text-indent: -192px;
    width: 320px;
#lastbutton {
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
    height: 150px;
    width: 150px;

Hi,
I wonder if it's related to the multilingual capability of BPM Object presentations.
Could you:
1. right mouse click the project in the Project Navigator tab.
2. click "Project Preferences"
3. click "Languages"
Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
1. Open a presentation
2. Click one of the labels
3. In the properties tab on the right, click the field beside the "Display" property
4. Click the button with the "..." on the right side of this field
Hope this helps,
Dan

K7T266 PRO2-RU and Problem with a FEW DISPLAY ADAPTERS ...

Similar Messages

Maybe you are looking for