K7T266Pro2, bios ver. 3.6, 3.7 - the system is unstable if the CPU is

I've a problem - after flashing to new versions of bios the system becomes very unstable if the CPU is even slightly overclocked (140х11). Now I have the bios version 3.3. It is stable, but does not support fast CPU's (when I overclock my cpu to 1862 MHz, the results in SiSoft Sandra 2002 are much lower then with non-overclocked cpu). What am I to do?
P.S. How to rename the thread?

what is the problem with 3.3 memory timing? I upgraded to 3.7 bios and found that I cannot restart Windows - every time I restart, the bios is stuck in the POST screen - I went back to 3.3 and the problem is gone. I also did not notice any difference in SisSandra 2002 score (including memory benchmark), 3dmark2001se and all other benchmark software I threw at my system between bios 3.3 and bios 3.7.
BTW, I was also like Kolian before in that once I flashed to any bios above 3.3, my system cannot overclock. It turns out I fixed my CPU heatsink the other way around. Once I fixed the heatsink correct, I can use bios 3.7 stably, only problem being it not able to restart.

Similar Messages

  • Fan RPM's read 0 in BIOS no matter where I plug the CPU fan, but it registers in Core Center???

    Hey,
    I used to have BIOS Rev 1.0, updated to 1.2 thinking it would fix the problem about the Fan RPM's not registering, meaning they show 0 in the BIOS, but it didn't fix it, but it registers normally in Core Center in Windows XP Pro.
    What the heck is the problem?? are any other poeple getting this problem?, everything is correctly connected and operates correctly.
    Specs are in my signature.
    Thank you,
    Frank

    Quote
    Originally posted by frank2036
    ... the problem about the Fan RPM's not registering....
    What the heck is the problem?? are any other poeple getting this problem?
    I have the same problem.  Don't worry too much about it.  Most BIOS' won't recognize a CPU fan below a certain threshold, and the Thermaltake Silent Boost's stock fan probably fits into that category.

  • MOVED: Mainboard P45-C51 BIOS 5.1 : where is the CPU multiplier ?

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=131704.0

    You have to disable EIST in BIOS to be able to see the CPU Ratio Option...

  • MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

    Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
    My spec:
    msi K7T turbo2 MS-6330 bios ver 3.6
    AMD athlon xp 2000+
    Asus v7100 Geforce 2 MX400
    2x256 kingston ram(pc133)
    2x20g maxtor hdd
    1xTV tuner card
    1XSb live soundcard

    Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

  • MOVED: [Athlon64] K8N Neo4 Bios ver 1.50 eats batteries

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] K8N Neo4 Bios ver 1.50 eats batteries

    Hi, Takesix.
    Unfortunately, you are not the only person with this problem.  I purchased a non-SLI version of this board about 6 weeks ago and am on my third battery, all from different manufacturers.  The board was originally flashed with V1.50 but I flashed it to v1.30 because I had read that it was a better version.  This has not stopped the draining battery problem.  Have e-mailed MSI and Monarch Computer tech support hoping to get an answer but haven't received any replys yet.  To read others strories go to the following link.     https://forum-en.msi.com/index.php?topic=84120.0  Incidentally, how old is your board?  Wonder if it was a specific lot?

  • [nForce] Bios ver 7.8 shows wrong processor

    I have just flashed my bios on my K7N2 Delta - ILSR to ver 7.8 and my xp 3200+ procesor now shows up as a xp 2500+ processor bothin bios and any reorting software in win xp pro IE dxdiag etc is there a fix for this ?

    Hi
    Go into the bios and set the fsb of the cpu to 200.  What is the speed of your memory, PC3200 is what you shoule be using.

  • MS-7360 (P35 NEO-F) bios ver 1.10 + INTEL Q8400 CPU

    hello
    i cant find q8400 in the supported cpu list for this mainboard, however the q8300 cpu is in the list
    i just need to make sure what 7360 (1.xx) is supported q8400 cpu, it is really weird - MB support almost all quads, but not q8400
    upd.
    is there any way to get codes of supported processors directly from the MB BIOS? 
    I ordered a processor from the store and until tomorrow I need either pay or cancel my purchase.

    Quote from: Namistai on 20-January-11, 11:25:04
    ok.
    MS-7360 bios ver 1.1A (1.10) supports q8400. Everything fine, thanks. 
    Thanks for reporting back.
     

  • Which bios ver do i need

    i have decided to flash my bios .. the thing is, i have a K8T Neo2 FIR motherboard and a athlon 64 3800+ venice core cpu
    at the moment i have ver 3.3 bios
    the ver 9.1 is for the k8t neo
    is this the one i need for the neo2 fir?

    Ty Tiresmoke
    I have read through the sticky .. seems a few people have had a little trouble with other issues since flashing to a new bios .. but if i don't get that duel channel i'll never sleep easy.
    i downloaded that version of clockgen and the agp lock does work. it was never a bios ver problem just a software one. the ver that ends in number 405 is the one to use.

  • K9A2 Platinum (MS-7376) S3 not waking from suspend on BIOS ver 1.b

    Hello,  I’m new to posting on this forum, so if I commit a faux pas, yell at me and I’ll go shoot myself.
    The Problem: System will NOT awaken from S3 standby. System DOES awaken from S1 standby.
    The History: Problem began after updating BIOS from Ver. 1.5 (7376v15) to Ver. 1.b (7376v1b) to provide CPU support for “AMD Phenom II X6 1090T”. (Previous CPU was AMD Phenom X4 9850)  Prior to BIOS to Ver. 1.b update, S3 standby worked just fine.
    System appears to awaken (HDD spin up, etc) but the display doesn't rise and shine. My guess is the adapter doesn't get powered on.
    My Thoughts: This problem appears similar to the S3 problem in BIOS ver. 1.4 which was resolved in BIOS ver. 1.5.
    No other problems have been noticed as a result of the BIOS update or the CPU upgrade.
    I suspect BIOS incompatibility with NVIDA Vid adapter in as much as K9A2 has had similar problem before. And apparently the K9N2 currently has a similar problem which has been acknowledged by MSI.
    All thoughts appreciated . . . .
    BTW – Only other concern I have with the 1090T is how to wipe the grin off my face.
    Thanks for listening.

    Bas,
    Well Sir, as I indicated in my initial post:  "System appears to awaken (HDD spin up, etc) but the display doesn't rise and shine. My guess is the adapter doesn't get powered on."
    To elaborate:  From all appearances, the PC goes into S3 suspend state just the way it has for a couple of years now.  That is to say, the HDDs spin down, the fans turn off, the lan light stops blinking, the router for this PC turns yellow from green meaning it is no longer active, the monitor blanks to black and then powers down.
    When I try to resume from the apparent S3 suspend state by pressing the ctrl-space keys; the system, case, and cpu fans start spinning, the HDDs spin up, the lan light starts blinking, the router light for this PC turns from yellow to green, and the monitor powers up -
                                                          BUT  IT REMAINS BLANK, BLACK, DEAD, AS IN NOTHING DISPLAYED ON IT
    And that, Sir,  is the problem, at least from my perspective.
    Merry Christmas, Alfie

  • Z77A-GD65 issue after updating to bios ver. 10.10

    Hi,
    after updating to the newest bios version 10.10 I've got this issue. I did clear CMOS. Everything seems to work correctly I've haven't got this before on bios ver. 10.8
    .

    My update bios ver. 10.10 was success but fail boot up when HDD connect to port 7 or Port 8 it fail.
    Please help, i got SSD on Port 1 for windows port 2 - 6 2TB HDD and port 7 & 8 3TB HDD
    this issues really want to 

  • I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

    I just purchased a movie from the iTunes store using iTunes ver. 11.0. The movie downloaded correctly is there on my hard drive but does appear in the iTunes library. How do I get it to appear in the iTunes Movie Library?

    Try Handbrake (http://handbrake.fr/), it's good and free

  • I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

    I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

    I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
    H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

  • New bios for T420 Updated the CPU microcode

    Hi,
    Bios 1.46
    (New) Updated the CPU microcode.
    (Fix) Corrected the help message for enabling the microphone in the BIOS Setup.
    The CPU microcode update: It will support Ivy Bridge?
    Thanks
    Solved!
    Go to Solution.

    Ivy and Sandy are compatible? I don't think so...
    Maybe they just increased or blocked the amount of allowed CPU models.
    I guess Mark has to step in and explain 

  • When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.  What gives?

    When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up.   Do I need this software?  Can I just download the pictures to my Mac without using the Canon software?

    When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
    You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
    Do I need this software?
    Probably not - exactly what about it do you want?
    Can I just download the pictures to my Mac without using the Canon software?
    Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
    Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
    If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
    LN

  • MOVED: how to change the cpu frequency/voltage from bios for k8ngm2il(n force 410)?

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=98841.0

    Quote from: tech_junkie on 11-July-06, 16:03:26
    recently purchased an --msi k8ngm2il(n force 410) motherboard and an amd 64 3200+(venice core) processor..but now i cant overclock the processor from the bios settings,when ever i try to change the fid settings from the bios settings and try to reboot, the settings go back to its default value!so i cant change the settings!! so does that mean that i cant change the fid settings and overclock my processor??please help!!please tell me how do i cahne the cpu frequency??please
    do you save the settings before exiting bios? also make sure that you clear your bios once by removing the battery for 10 min, in order to clear all rezidual information.

Maybe you are looking for

  • How to change the view criteria at run time for af:query

    Hi, I've a usecase where I need to change the view criteria of the af:query at run time. Use case: ======= 1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees und

  • How to store data in KM from a JSP file

    Hi In our portal we have a JSP file with a text view where the user can add notes/things to remember etc. I need somewhere to store that information. I don't want to store it directly on the portalserver or the backendsystem. Is there a way to store

  • TS4403 there is no photo stream under favorite links in my pictures  windows vista,now what?

    I'm trying to install photo stream on my vista PC and have gone to pictures but there is no photo stream option to turn on.  Now what?

  • Screen goes grey when picking up laptop

    I have an issue on an 5 year old mac book pro.  Sometimes when you pick it up by either front corner and holding the opposite top corner of the monitor, the screen will go grey.  The power is still on, but no display.  Not sure if it is indeed still

  • Google Reader feeds will not open or refresh.

    I've been using Google Reader on Firefox for years and it suddenly is not functioning properly. I had not made any changes to my computer, or installed new programs. Reader continues to work on IE. Feeds won't open or display; when they do it often f