K7tpro(6330) BIOS have BUGs with Geforce2 GTS on linux !

MSI K7T Pro (6330) motherboards working with Geforce2 GTS GPU can't load driver correctly on linux !
I use the newest SBIOS v3.6 and the newest GPU driver NVIDIA-Linux-x86-1.0-7184, While loading driver It report:
Code: [Select]
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: request_mem_region failed for 496M @ 0xe0ffffff. This can
NVRM: occur when a driver such as rivatv is loaded and claims
NVRM: ownership of the device's registers. nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
I contacted with Nvidia's supporter, They say, If report "request_mem_region failed for 496M @ 0xe0ffffff" that's bec. of motherboard's System BIOS have Bugs, more details on:
http://www.nvnews.net/vbulletin/showthread.php?t=80587
(include all system information and error report )
When MSI could update 6330's BIOS ?

My Geforce card is running well on win32 system. So It will be in order.
I use the offical FC4 release, also the kernel is FC4's release version 2.6.11-1.1369_FC4. The Nvidia's driver is recompiled with Kernel's(2.6.11-1.1369_FC4) source, So there is no compatibility problem. There is no problem on compile-time, But errored while loading nvidia.ko.
As I know MSI-6330 had BIOS peoblem working with Geforce card historically, According to the BIOS update notes:
e.g.: on 2000-09-13 relaseed v1.5 BIOS to fix problem on Geforce 256 and MX card
e.g.: on 2001-08-03 released v2.9 BIOS to fix problem on Geforce2 AGP card ( I use this card )
So It already released serval BIOS updates up to v3.6, I'm afraid there are some hidden problems.
Quote
You are sure the Geforce card is in order? Especially the memory chip?
Please also say what parts you have in the system.

Similar Messages

  • FCPX 10.0.6 appears to have bugs with Compound Clips

    Just a warning -- I  upgraded to 10.0.6 and am finding  annoying problems with the handling of Compound Clips.  After any non-trivial editing of Compound Clips, FCPX will just stop rendering most of your video.  You will just see a black screen, occasionally with some of your titles or shapes, but the bulk of the video is suddenly not  rendered any more.  Sometimes you can see it briefly in flashes inbetween black screens if you frame advance with right-arrow.  But the only way to get out of this situation that I have found so far is to completely exit and re-enter FCPX.  Which is really tedious and annoying to have to do this every time you edit the contents of a Compound Clip.
    A secondary note:  Beware -- they significantly changed the behavior of Compound Clips.  Compound Clips are now "linked" so if you aren't aware of this change and do something like copy and paste a Compound Clip, then innocently edit one of the pasted Compound Clips, you will unknowingly change them all.  Perhaps a nice feature, but if you don't realize this change was made, and you go about doing what you used to do, you will waste some time because you will destroy all those linked Compound Clips since you didn't know they are all now linked.  Kind of amazing that they would just change the behavior like this and make the new behavior the default.  If you're being nice to your users, you usually try to make things work compatibily with how they worked before, requiring you to do something different to get the new behavior.  I guess I learned that I better read the release notes carefully before upgrading because who knows what behavior may have changed.

    After spending some time on the Phone with support, we concluded that this FCPX project has been corrupted in some unrecoverable way which caused the black screen problems with Compound Clips.  I will need to rebuild the project from scratch.  Whether it was corrupted by the new version or it is a coincidence that it became corrupted right about the same time is not known.

  • Bugs with iOS 4.0.1?

    I'm having trouble saving the changes I made to my note. It seems to me that iOS 4.0.1 may have bugs with the "Notes" software.

    I posted on this topic in another thread and I think I have an answer for you. Here's the thread with my solution:
    http://discussions.apple.com/thread.jspa?threadID=2530080&tstart=0
    My brother's iPhone had this issue. We solved his problem. Hopefully this info will help you with your problem.

  • BUG with Memory CAS-Latency with MSI i848P Neo-LS BIOS

    I have a bug with MSI i848P Neo-LS BIOS. I try many MSI i848P with same trouble : the CAS Latency is always set to 2.0 even if the memory is CAS Latency 2.5.
    It doesn't depend on PSU or others things (graphics card,...).
    Try with Pentium 4C 2.6 or 2.8
    But I have just one brand of memory (but many different sticks). Chips reference are VT56DD32M8PC-5 (256 or 512 Mb). This memory are reference as Cas Latency 2.5
    If I set memory timings on SPD or manual : same result !!!
    If I set memory speed on AUTO or 400 MHz : same result  !!!
    If I set other timings, then they are save correctly (ie : RAS# precharge set to 3 or 4).
    I check timings with latest version of Memtest86+ V1.0 : http://www.memtest.org/
    and of course, I get many errors.
    The same memory tested on others mobo, give good results.
    I try Windows XP installation and I get....  blue screens.
    With some memory sticks : I have this message "memory timing too tighly",
    if I press F1 to continue: then I get a memory cas latency of 2.5 with memtest86+ and then no error.
    I try BIOS revision 1.0 (default) and 1.2: same result !!!
    So, as I said before, I think this is a bug with the BIOS. I agree that a BIOS cannot detect correctly all kind of memory, but if you set memory timings manualy, then it must be set as you want ! ?
    Any idea...
    Thanks

    H0 Alex,
    You are correct.I have the same problem with my 875p neo lsr on bios 1.9. TH0S 0S B0OS BUG.but everyone says your psu is not enough or your rams isnt  on the MSI Memory Compatability List.
    why all of rams I try give same result?
    MS0 boards works only with 10 or 20 ram.you don't say customer why you use this rams?
    why in asus boards many os these rams working properly.This rams isnt on the MSI Memory Compatability List.but working.I try many no name rams and results are very good in all of the tests.
    In my opinion MS0 bioses doesnt work good enough.
    You don't drive a car.Car Drives you.

  • Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...

    Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...  When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything...  Very buggy. 

    It appears to me that network file access is buggy in Maverick.
    In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
    It makes impossible navigate a directory tree.
    File access has been trashed in Maverick.
    They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • A Bug with the new ms-6729 Bios (6729v5.30)

    Hi
    After updating my Bios to the new version, the motherboard detect my CPU(Athlon 2400+) as a 1800+.
    I tried to change settings manually without success.
    Anybody has encountred a similar problem?
    Best Regards

    Dir Sir,
    Thank you very much for your quick answer, but i believe you didn't try
    the mentioned Bios.
    I'm not a novice, i mounted more than 300 computers for my clients, and
    around 30 of last 50 computers are with MSI Motherboards.
    Cpu Fsb for Athlon 2400+ is 133 but the ddr/fsb is 4:5 because i'm using
    DDR 333 and the K7N2-V (MS-6729) is DDR 400 ready.
    With all MSI motherboards i mounted, it’s enough to put the correct CPU
    FSB and (Auto) to detect everything by the SPD.
    Certainly it's a BUG with the new version because the Bios and Windows
    detect CPU as Athlon 1800+ (1500) instead of 2400+ (20000.
    Best Regards,
    Lostan

  • Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.

    Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
    Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
    marek

  • [svn:fx-trunk] 9287: Fixes bug with shader-transition effects ( AnimateTransitionShader, Wipe, and CrossFade) when acting on targets that either have filters or are inside a hierarchy with filters .

    Revision: 9287
    Author:   [email protected]
    Date:     2009-08-13 15:53:43 -0700 (Thu, 13 Aug 2009)
    Log Message:
    Fixes bug with shader-transition effects (AnimateTransitionShader, Wipe, and CrossFade) when acting on targets that either have filters or are inside a hierarchy with filters. Fix was to capture the bitmap snapshot of the target without any of its own filters applied and to then use the ShaderFilter in conjunction with the target's filters during the animation.
    QE notes: Probably need more tests in this area, now that we handle it
    Doc notes: none
    Bugs: sdk-20250
    Reviewer: Jason
    Tests run: Checkintests, Mustella (spark/effects/[AnimateTransitionShader|Wipe|CrossFade])
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/sdk-20250
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/AnimateTransitionShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/effects/supportClasses/AnimateTransiti onShaderInstance.as

    Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
    Sadly, the following issue is NOT fixed for me. Is it with new projects only?  I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
    On the list above...
    Switching between sequences can turn the render bar red.
    This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
    1) Create two sequences with multiple short clips (the more clips the better)
    2) Make sure GPU acceleration is enabled.
    3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
    4) Hit SAVE.
    5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
    6) Toggle back to the original sequence and the delay occurs again.
    7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
    Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
    Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
    Sigh.

  • OEM Visiontek AGP GeForce2 GTS, 32MB DDR on MSI Neo2 Platinum as temp fix?

    I'm taking my ATI 9700 Pro to ATI to have it RMA'd for some rolling interference lines. I've done troubleshooting and its the card.
    Will I have any problems using this Geforce2 GTS AGP card as a temporary replacement while I wait for the ATI card to be fixed? I'm swapping it and I get $5 for my Matrox G400 max AGP card. For obvious reasons, I'm not keeping and using the G series Matrox G400 since it won't work in my PC with the MSI Neo2 and BIOS 1.4 etc etc
    So any problems using this as a temporary replacement?
    OEM Visiontek AGP GeForce2 GTS, 32MB DDR
    thanx for any feedback,

    Forgot to do that! Its working fine though. I'll try to clean out the old ATI drivers. This is only temporary and I'll be wiping this system clean and starting over anyways.
    So far its ok. Another troubleshooting verification that the 9700 Pro I had was faulty. With this gforce2 gts the rolling horizontal lines are absent.

  • GeForce2 GTS refresh rate problem

    I have a GeForce2 GTS (MSI Starforce 815) running on an IWill KK266 (KT133A chipset) and a Sony GDM-400PS monitor. My problem is that when I set the refresh rate to "optimal" it runs at 60hz. This is a problem because my eyes are really sensitive to the flicker. I can set the refresh manually to a higher static refresh rate, and I can then switch back to "optimal" and it will adjust properly to a higher refresh rate but upon reboot it converts back to 60hz (although setting still says optimal.) I have several other non MSI GeForce2 GTS cards and they don't have this problem.
    Anyone have any ideas?
    To help weed out the suggestions:
    -running 350W Enermax PS, more then enough
    -running Win98SE (don't tell me to switch operating systems please)
    -Sony 400PS well within spec
    -have run 3 sets of Detonator drivers currently 40.72 same problem with all
    -I know I can set it to run at a static 75 or 85Hz but I prefer to have it adjust to the optimal setting for my usage.
    Thanks for any help!

    beavercleaver,
    I always set the monitors at 85hz.  It is a great frame rate that is really easy on the eyes.
    Take Care,
    Richard

  • (SOLVED!) Bugs with Microphone (X-Fi Soundcard) on Voice Tools (Teamspeak 3)

    My PC:
    Mainboard: ASUS M4A89GTD PRO
    Voltage : BEQUIET! Straight Power 580W
    CPU : AMD Phenom II X4 965 Black Edition 3,40GHZ
    RAM : OCZ 2x2GB Dual Kit 333
    GFX : MSI Radeon R5770 Hawk
    Sound : Creative X-Fi Fatalty Titanium PCIe
    Headset : Speedlink Medusa 5. Progamer Edition (with Cinch! no USB crap..)
    OS : Microsoft Windows XP Professional x64 Edition Version 2003 SP2
    Hi, i've got the X-Fi Fatalty Titanium Soundcard since last day and im really happy about that soundcard.
    But......
    Ive gotta real problem now.. when i starting a voice program like Teamspeak 3 or ICQ / X-Fire whatever..
    my voice is crunshing, sounds like overdri'ved. i tried every settings on that drivers but it wont work.. and the best is.. when i start to listen myself on windows to check how my voice is on it.. it is clear and fine. Only on Voice Tools are this crap sound.. i really dont know anymore what i can do also to smash the card outta my window..
    what i've tried :
    All Driver / Stuff deinstalled.. cleaned with Driver Sweeper / Driver Cleaner Pro and TuneUp Registry Cleaner
    and i've tried the old stuff on CD inclusi've the latest Driver for my OS (Windows XP Professional x64) "2.7.0007"
    it dont work.. got the same bug
    i've tried the Final Edition of Pax Drivers 200 Suit... and same thing....
    at last i've tried the latest driver 2.7.0007 with the latest Console Center "2.6.09" but also.. the sound on Voice Tools always craped again..
    and i got on Games like Call of Duty 4 always some sound bugs like a shot is repeat or some other sound is repeat or strange cut.
    this all makes me really sad...
    i would be looking forward if anyone here got a idea how to fix this problem..
    l8er

    FRe: Bugs with Microphone (X-Fi Soundcard) on Voice Tools (Teamspeak 3)?so... i keeped this settings as ussualy for the future for other guys they got maybe the same problems with voicetools and microphone settings on X-Fi cards..
    i installed the actuallay driver settings and all programs for the X-Fi..
    after that i restart my PC and going into the BIOS and activated my Onboardsoundcard.
    when i start my windows again i installed the HD Realtek Drivers and Programs... after restart i choose on System--> Audio etc..
    Soundinput ---> Realtek
    Soundoutput ---> X-Fi
    now it works for me great.. i got no Microphone bugs anymore on Voicetools and also i got a really really great sound from the X-Fi on Games and Music.
    I hope i have some guys help with this art of solving that problem.. sry but i've tryied 0 different ways of Driver settings and i tryied Daniel_K Drivers / Pax Drivers and old Creative Drivers... nothing solved my problems..
    oh and of course if u got some noise sounds like a pipe sound but really high and not really loud just like u can hear what the Computer is working inside your headset.. make the newest Creative Drivers on it.. there must be a new setting who Mute this sounds.. i got no signals anymore in my headset how the PC is work.. all is silence when i do nothing.. its really chilled
    So.. bb and l8er for u all..
    oh.. and thx for "no" support after all in the last 2 Days here..
    P.S.
    this will be the last Creative Card for me @ Creative Firm.. no kidding.. i've payed 26? for the badest support and the badest worked drivers i've ever seen in my life.. i hope there will be more rivals in future for u.. so u can stop to think about?u can?make the worst support at?all to the clients who buy your stuff..
    Best Regards
    Kyrane

  • MSI GeForce2 GTS Drivers will not install

    When trying to upgrade drivers for MSI 8815 VGA (GeForce2 GTS) using either the Nvidia or MSI download Windows 98 stops booting and displays this error in the dos screen:
    While initializing device IOS:
    ERROR: Real mode system memory allocation failed.
    I have tried all the drivers available for Nvidia cards and nothing will install later than version 21.85. I don't have any versions later than that except what is available now for download.
    Is there any way to get around this problem?

    No, but RAM is 512MB though I don't have any problems with the cache size, etc. or recognizing all the RAM. I considered testing removing one of the sticks of ram just long enough to install the video drivers but wonder whether the same problem would happen as soon as the stick was put back in. The note on Microsoft web site refers to Windows ME and the cache size which again don't seem to be a problem here.

  • Boot Rom/BIOS emulation issue with latest iMacs?

    Hi,
    Firstly thanks for viewing.
    We've just bought 34 new iMac's and previously had (and still have) 60 odd Aluminum iMac's dual booting OS X/Windows which have no problems.
    The new iMacs though seem to be having huge issues with booting Window's the first 2 attempts wether using Apple's Startup Manager or rEFIt.
    The first attempt the machine will just hang after at a grey screen after volume selection and the second attempt you will receive a "Disk Read Error" and the third attempt the machine will boot normally and this behavior is happening on all of the brand new 34 iMac's.
    rEFIt produces the following error:
    Error: Not found return from legacy loader;
    Error: not found from locatedevicepath;
    Error: not found from locatedevicepath;
    Error: load error while (re)opening our installation volume;
    Which leads me to believe the issue lies with Apple's Boot Rom and the hand over between EFI and BIOS emulation.
    I have tried multiple installs of OS X Snow Leopard with 32 bit XP, 32 bit Vista and & 32 bit Windows 7 as well as using Bootcamp 3.1 which really only add's driver support for Windows 7 no Boot Rom updates.
    If anyone is having similar issue's I'd love to hear and any work arounds you may have.
    Thanks for taking the time to read my post.
    Dave Maltby

    Hi Sea Dog,
    Thanks for your reply  . But I cannot find anything related to my problem in the link you attached (or it’s “sublinks”). One sublink is about an annoying usb3 bug with some problem related to the S3 sleep state. (Maybe this is the one you are referring to?) But I do not have this problem, I can wake my PC from the S3 sleep state via my connected USB devices. The problem I have is that I also start my PC after a shutdown (=S5 state I assume) via my connected USB devices, which I do not want to happen since too easy to start the PC accidently for example by just moving the mouse a little bit. As I write above, I think this is caused by MSI:s choice to configure their BIOS regarding “Resume from S3/S4/S5 by USB Device”. If I am right about the cause to my problem,  I guess MSI should have chosen this resume option without the "…S4/S5…" or at least without the "S5"  (By the way, I seem to have version C2 of the Z87 chipset if I understand a note correct on the MB box.)
    Again, am I correct about my idea to the cause of this problem?? Can someone please advise how to solve it if possible??

  • 30EA3: German language bug with user defined reports still not fixed

    In 30EA2: Limited folder functionality with German language
    I wrote about a bug in 30EA2. Was this message noticed by the developers?
    The bug still exists in 30EA3.
    In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
    A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf

    I made a new thread for the same bug in 3.1EA2:
    3.1EA2 Old bug with German language settings still exists
    I have some hope, that my problem finally got noticed by the developers.

Maybe you are looking for